Permalink
Switch branches/tags
Nothing to show
Commits on Dec 9, 2011
  1. Remove old teensylu boards

    Lawrence committed Dec 9, 2011
  2. Remove old teensylu boards

    Lawrence committed Dec 9, 2011
Commits on Nov 10, 2011
  1. Few silk fixes in the prod board

    Lawrence committed Nov 10, 2011
Commits on Nov 7, 2011
  1. Add production panelized version

    Lawrence committed Nov 7, 2011
Commits on Nov 6, 2011
  1. Silkscreen fixes for 0.9

    Lawrence committed Nov 6, 2011
  2. Cleanup old brd files

    Lawrence committed Nov 6, 2011
  3. LRC v0.9

    Lawrence committed Nov 6, 2011
  4. working/Teensylu.brd

    Lawrence committed Nov 6, 2011
  5. Rename board to LRC

    Lawrence committed Nov 6, 2011
  6. Updated Readme for LRC .9

    Lawrence committed Nov 6, 2011
  7. Silk for other header. 3.3v option for bluetooth

    Lawrence committed Nov 6, 2011
  8. Improve layout of wires. Update drawings for crystal, bluetooth. Move…

    … wireless into proper box in schematics
    Lawrence committed Nov 6, 2011
Commits on Nov 5, 2011
  1. Polygon tuning

    Lawrence committed Nov 5, 2011
  2. Fix routing errors, improve spacing

    Lawrence committed Nov 5, 2011
  3. Add bt header, reorganize and relayout

    Lawrence committed Nov 5, 2011
Commits on Nov 3, 2011
  1. Change layout, add another atx header

    Lawrence committed Nov 3, 2011
Commits on Oct 31, 2011
  1. Add wireless, sd card

    Lawrence committed Oct 31, 2011
Commits on Jun 30, 2011
Commits on Jun 25, 2011
  1. Updated working to rev 0.7

    nothankyou1 committed Jun 25, 2011
  2. Added C7, changed C12 capacitance to 580uF to reduce physical dimensi…

    …ons. Changed Expansion header to match sanguinololu rev 1.2 expansion header. Changed package of MCU to meet specs for better solderability. 4 Pin Molex removed in favor of 7805 voltage regulator. Solder jumper changed to wide version to reduce chance of short of 5v to 12v rail.
    nothankyou1 committed Jun 25, 2011
Commits on May 8, 2011
  1. Changing caps to 35v

    StephS committed May 8, 2011
  2. Merge pull request #1 from WebSpider/master

    Adding a BOM
    StephS committed May 8, 2011
Commits on May 2, 2011
  1. Updating working folder.

    nothankyou1 committed May 2, 2011
Commits on May 1, 2011
  1. updated working

    Joem committed May 1, 2011
Commits on Apr 30, 2011
  1. Lots of changes. Added Enable Pin to each motor controller, Extra I/O…

    … header is now reduced to 7x2 header. Cleaned up routing. Moved 4.7uF cap to 5v Input (Value may change). Added pullup jumper to ALE pin for Teensy firmware compatability. Added PWM Fan output *Note: Mosfet is limited to 2 watts or 5 amps MAX. Re-routed USB signals to get closet to USB Spec *Note: USB Spec would require 0402 resistors and 8x8mil trace/spacing, we should be ok on such a short run.
    
    Versions 0.3-0.42 were internal only. 0.43 breaks compatability with earlier revs as some PWM pins have shifted.
    nothankyou1 committed Apr 30, 2011
  2. Lots of changes. Added Enable Pin to each motor controller, Extra I/O…

    … header is now reduced to 7x2 header. Cleaned up routing. Moved 4.7uF cap to 5v Input (Value may change). Added pullup jumper to ALE pin for Teensy firmware compatability. Added PWM Fan output *Note: Mosfet is limited to 2 watts or 5 amps MAX. Re-routed USB signals to get closet to USB Spec *Note: USB Spec would require 0402 resistors and 8x8mil trace/spacing, we should be ok on such a short run.
    
    Versions 0.3-0.42 were internal only. 0.43 breaks compatability with earlier revs as some PWM pins have shifted.
    nothankyou1 committed Apr 30, 2011