diff --git a/ts/librecad_cs.ts b/ts/librecad_cs.ts
index ab420ab776..32be9849ad 100644
--- a/ts/librecad_cs.ts
+++ b/ts/librecad_cs.ts
@@ -1,7 +1,8 @@
+
-
+
Nahrávám..
@@ -287,8 +288,8 @@ Datum: %1
Spustí on-line manuál
-
- Blok '%1'
+
+ Blok '%1'
- Datum: %1
+ Datum: %1
-
+
-
-
+
+
-
-
+
+
@@ -370,46 +371,66 @@ Nyní můžete uložit svou práci.
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
-
+
+
-
+
-
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
@@ -1093,11 +1114,11 @@ Auto-save disabled.
- Smazat "od ruky"
+ Smazat "od ruky"
- &Smazat "od ruky"
+ &Smazat "od ruky"
@@ -1929,15 +1950,15 @@ Auto-save disabled.
-
+
-
+
-
+
@@ -1959,7 +1980,7 @@ Auto-save disabled.
QG_ArcTangentialOptions
-
+
@@ -2008,8 +2029,8 @@ Auto-save disabled.
Přejmenování bloku
-
- Nelze pojmenovat blok. Blok "%1" již existuje.
+
+ Nelze pojmenovat blok. Blok "%1" již existuje.
@@ -2128,7 +2149,7 @@ v jiném okně
-
+
@@ -2252,7 +2273,7 @@ v jiném okně
-
+
@@ -2333,48 +2354,48 @@ v jiném okně
Hlavní
-
- Zobrazit menu "Úsečky"
+
+ Zobrazit menu "Úsečky"
-
- Zobrazit menu "Oblouky"
+
+ Zobrazit menu "Oblouky"
-
- Zobrazit menu "Kružnice"
+
+ Zobrazit menu "Kružnice"
-
- Zobrazit menu "Body"
+
+ Zobrazit menu "Body"
-
- Zobrazit menu "Měření"
+
+ Zobrazit menu "Měření"
-
- Zobrazit menu "Elipsy"
+
+ Zobrazit menu "Elipsy"
Šrafy / Výplně ploch
-
- Zobrazit menu "Úpravy"
+
+ Zobrazit menu "Úpravy"
-
- Zobrazit menu "Kóty"
+
+ Zobrazit menu "Kóty"
Texty
-
- Zobrazit menu "Výběr"
+
+ Zobrazit menu "Výběr"
@@ -2390,11 +2411,11 @@ v jiném okně
-
+
-
+
@@ -2507,7 +2528,7 @@ v jiném okně
QG_CadToolBarPolylines
-
+
@@ -2515,27 +2536,27 @@ v jiném okně
-
+
-
+
-
+
-
+
-
+
-
+
@@ -2668,7 +2689,7 @@ v jiném okně
QG_CadToolBarSplines
-
+
@@ -2676,7 +2697,7 @@ v jiném okně
-
+
@@ -2786,31 +2807,31 @@ v jiném okně
-
+
-
+
-
+
-
+
-
+
-
+
-
+
@@ -2833,7 +2854,7 @@ v jiném okně
-
+
@@ -2841,11 +2862,11 @@ v jiném okně
-
+
-
+
@@ -3044,7 +3065,7 @@ v jiném okně
-
+
@@ -3160,12 +3181,12 @@ v jiném okně
Vítejte
-
...
-
+
@@ -3385,7 +3406,7 @@ Toto nastavení můžete později změnit v menu Nastavení QCADu.
...
-
+
@@ -3436,11 +3457,11 @@ Toto nastavení můžete později změnit v menu Nastavení QCADu.
...
-
+
Ctrl+S
-
+
@@ -3534,7 +3555,7 @@ Toto nastavení můžete později změnit v menu Nastavení QCADu.
Grady
- Surveyor's units
+ Surveyor's units
Kontrolní jednotky
@@ -3542,8 +3563,8 @@ Toto nastavení můžete později změnit v menu Nastavení QCADu.
Vlastnosti
- For the length formats 'Engineering' and 'Architectural', the unit must be set to Inch.
- Pro formát délkových měr 'Stojařský a Stavařský', musí být jednotky nastaveny na palcovou míru.
+ For the length formats 'Engineering' and 'Architectural', the unit must be set to Inch.
+ Pro formát délkových měr 'Stojařský a Stavařský', musí být jednotky nastaveny na palcovou míru.
Extension line extension:
@@ -3655,11 +3676,11 @@ Toto nastavení můžete později změnit v menu Nastavení QCADu.
Splines
-
+
Number of line segments per spline patch:
-
+
4
@@ -3946,42 +3967,42 @@ Toto nastavení můžete později změnit v menu Nastavení QCADu.
Alt+U
-
+
Minimal Grid Spacing (px):
-
+
Program Defaults
-
+
Time between automatc saving of thedocument in minutes.
-
+
Auto save time:
-
+
QG_DlgOptionsVariables
Drawing Variables
-
+
Variable
-
+
Code
-
+
Value
-
+
&OK
@@ -4083,7 +4104,7 @@ Toto nastavení můžete později změnit v menu Nastavení QCADu.
...
-
+
@@ -4134,7 +4155,7 @@ Toto nastavení můžete později změnit v menu Nastavení QCADu.
...
-
+
@@ -4185,14 +4206,14 @@ Toto nastavení můžete později změnit v menu Nastavení QCADu.
...
-
+
QG_DlgSpline
Spline
-
+
Layer:
@@ -4204,11 +4225,11 @@ Toto nastavení můžete později změnit v menu Nastavení QCADu.
Degree:
-
+
Closed
-
+
1
@@ -4331,7 +4352,7 @@ Toto nastavení můžete později změnit v menu Nastavení QCADu.
Diameter (ø)
-
+
Degree (°)
@@ -4339,11 +4360,11 @@ Toto nastavení můžete později změnit v menu Nastavení QCADu.
Plus / Minus (±)
-
+
At (@)
-
+
Hash (#)
@@ -4355,11 +4376,11 @@ Toto nastavení můžete později změnit v menu Nastavení QCADu.
Copyright (©)
-
+
Registered (®)
-
+
Paragraph (§)
@@ -4367,15 +4388,15 @@ Toto nastavení můžete později změnit v menu Nastavení QCADu.
Pi (π)
-
+
Pound (£)
-
+
Yen (¥)
-
+
Times (×)
@@ -4383,7 +4404,7 @@ Toto nastavení můžete později změnit v menu Nastavení QCADu.
Division (÷)
-
+
Insert Unicode
@@ -4455,11 +4476,11 @@ Toto nastavení můžete později změnit v menu Nastavení QCADu.
[0780-07BF] Thaana
-
+
[0900-097F] Devanagari
-
+
[0980-09FF] Bengali
@@ -4467,15 +4488,15 @@ Toto nastavení můžete později změnit v menu Nastavení QCADu.
[0A00-0A7F] Gurmukhi
-
+
[0A80-0AFF] Gujarati
-
+
[0B00-0B7F] Oriya
-
+
[0B80-0BFF] Tamil
@@ -4483,19 +4504,19 @@ Toto nastavení můžete později změnit v menu Nastavení QCADu.
[0C00-0C7F] Telugu
-
+
[0C80-0CFF] Kannada
-
+
[0D00-0D7F] Malayalam
-
+
[0D80-0DFF] Sinhala
-
+
[0E00-0E7F] Thai
@@ -4511,15 +4532,15 @@ Toto nastavení můžete později změnit v menu Nastavení QCADu.
[1000-109F] Myanmar
-
+
[10A0-10FF] Georgian
-
+
[1100-11FF] Hangul Jamo
-
+
[1200-137F] Ethiopic
@@ -4527,39 +4548,39 @@ Toto nastavení můžete později změnit v menu Nastavení QCADu.
[13A0-13FF] Cherokee
-
+
[1400-167F] Unified Canadian Aboriginal Syllabic
-
+
[1680-169F] Ogham
-
+
[16A0-16FF] Runic
-
+
[1700-171F] Tagalog
-
+
[1720-173F] Hanunoo
-
+
[1740-175F] Buhid
-
+
[1760-177F] Tagbanwa
-
+
[1780-17FF] Khmer
-
+
[1800-18AF] Mongolian
@@ -4567,7 +4588,7 @@ Toto nastavení můžete později změnit v menu Nastavení QCADu.
[1E00-1EFF] Latin Extended Additional
-
+
[1F00-1FFF] Greek Extended
@@ -4639,7 +4660,7 @@ Toto nastavení můžete později změnit v menu Nastavení QCADu.
[2700-27BF] Dingbats
-
+
[27C0-27EF] Miscellaneous Mathematical Symbols-A
@@ -4667,11 +4688,11 @@ Toto nastavení můžete později změnit v menu Nastavení QCADu.
[2E80-2EFF] CJK Radicals Supplement
-
+
[2F00-2FDF] Kangxi Radicals
-
+
[2FF0-2FFF] Ideographic Description Characters
@@ -4691,19 +4712,19 @@ Toto nastavení můžete později změnit v menu Nastavení QCADu.
[3100-312F] Bopomofo
-
+
[3130-318F] Hangul Compatibility Jamo
-
+
[3190-319F] Kanbun
-
+
[31A0-31BF] Bopomofo Extended
-
+
[3200-32FF] Enclosed CJK Letters and Months
@@ -4735,11 +4756,11 @@ Toto nastavení můžete později změnit v menu Nastavení QCADu.
[D800-DBFF] High Surrogates
-
+
[DC00-DFFF] Low Surrogate Area
-
+
[E000-F8FF] Private Use Area
@@ -4771,7 +4792,7 @@ Toto nastavení můžete později změnit v menu Nastavení QCADu.
[FE50-FE6F] Small Form Variants
-
+
[FE70-FEFF] Arabic Presentation Forms-B
@@ -4779,7 +4800,7 @@ Toto nastavení můžete později změnit v menu Nastavení QCADu.
[FF00-FFEF] Halfwidth and Fullwidth Forms
-
+
[FFF0-FFFF] Specials
@@ -4787,15 +4808,15 @@ Toto nastavení můžete později změnit v menu Nastavení QCADu.
[10300-1032F] Old Italic
-
+
[10330-1034F] Gothic
-
+
[10400-1044F] Deseret
-
+
[1D000-1D0FF] Byzantine Musical Symbols
@@ -4894,7 +4915,7 @@ Toto nastavení můžete později změnit v menu Nastavení QCADu.
again Still No Text supplied.
-
+
@@ -5500,7 +5521,7 @@ Toto nastavení můžete později změnit v menu Nastavení QCADu.
...
-
+
@@ -5542,11 +5563,11 @@ Toto nastavení můžete později změnit v menu Nastavení QCADu.
Tangential
-
+
Tan Radius
-
+
Angle
@@ -5633,11 +5654,11 @@ Toto nastavení můžete později změnit v menu Nastavení QCADu.
QG_SplineOptions
Spline Options
-
+
Degree:
-
+
1
@@ -5653,7 +5674,7 @@ Toto nastavení můžete později změnit v menu Nastavení QCADu.
Closed
-
+
Undo
@@ -5835,12 +5856,12 @@ Toto nastavení můžete později změnit v menu Nastavení QCADu.
Odeber hladinu
- Layer "%1" and all entities on it will be removed.
- Hladina "%1" a všechny prvky v ní budou vymazány.
+ Layer "%1" and all entities on it will be removed.
+ Hladina "%1" a všechny prvky v ní budou vymazány.
- Layer "%1" can never be removed.
- Hladina "%1" nemůže být nikdy vymazána.
+ Layer "%1" can never be removed.
+ Hladina "%1" nemůže být nikdy vymazána.
Layer Dialog
@@ -5851,16 +5872,16 @@ Toto nastavení můžete později změnit v menu Nastavení QCADu.
Vyjmi blok
- Block "%1" and all its entities will be removed.
- Blok "%1" a všechny jeho prvky budou odstraněny.
+ Block "%1" and all its entities will be removed.
+ Blok "%1" a všechny jeho prvky budou odstraněny.
Layer Properties
Vlastnosti Hladiny
- Layer with a name "%1" already exists. Please specify a different name.
- Hladina pojmenovaná "%1" již existuje. Zadejte prosím jiný název.
+ Layer with a name "%1" already exists. Please specify a different name.
+ Hladina pojmenovaná "%1" již existuje. Zadejte prosím jiný název.
@@ -5961,83 +5982,83 @@ Přejete si ho přepsat?
Inch
-
+
Foot
-
+
Mile
-
+
Millimeter
-
+
Centimeter
-
+
Meter
-
+
Kilometer
-
+
Microinch
-
+
Mil
-
+
Yard
-
+
Angstrom
-
+
Nanometer
-
+
Micron
-
+
Decimeter
-
+
Decameter
-
+
Hectometer
-
+
Gigameter
-
+
Astro
-
+
Lightyear
-
+
Parsec
-
+
Export Image
@@ -6049,12 +6070,16 @@ Přejete si ho přepsat?
Loading Library Paths..
- Nahrávám cesty ke knihovnám..
+ Nahrávám cesty ke knihovnám..
Loading File %1..
Nahrávám soubor %1..
+
+ Loading...
+
+
RS_ActionBlocksAdd
@@ -6201,8 +6226,8 @@ Přejete si ho přepsat?
&Vložit blok
-
-
+
+
@@ -6594,11 +6619,11 @@ Přejete si ho přepsat?
RS_ActionDrawArcTangential
Arc: Tangential
-
+
Specify base entity
-
+
Cancel
@@ -6874,8 +6899,8 @@ Přejete si ho přepsat?
Vložit obrázek (bitmapu)
-
-
+
+
@@ -7214,8 +7239,8 @@ Přejete si ho přepsat?
Kreslí mnohoúhelník zadaný středem a rohem
-
-
+
+
@@ -7515,18 +7540,18 @@ Přejete si ho přepsat?
Undo disallowed due a fatal bug somewhere. Sorry.
-
+
RS_ActionDrawSpline
&Spline
-
+
Specify first control point
-
+
Cancel
@@ -7534,7 +7559,7 @@ Přejete si ho přepsat?
Specify next control point or [%1]
-
+
Back
@@ -7542,7 +7567,7 @@ Přejete si ho přepsat?
Specify next control point
-
+
Cannot undo: Not enough entities defined yet.
@@ -7681,7 +7706,7 @@ Přejete si ho přepsat?
&New...
-
+
@@ -7772,23 +7797,23 @@ Přejete si ho přepsat?
RS_ActionInfoArea
Polygonal Area
-
+
Area: %1
-
+
Circumference: %1
-
+
Point: %1/%2
-
+
Specify first point of polygon
-
+
Cancel
@@ -7796,11 +7821,11 @@ Přejete si ho přepsat?
Specify next point of polygon
-
+
Terminate
-
+
@@ -8052,12 +8077,12 @@ Přejete si ho přepsat?
Vloží objekt z knihovny součástí.
-
-
+
+
- Cannot open file '%1'
-
+ Cannot open file '%1'
+
@@ -8189,11 +8214,11 @@ Přejete si ho přepsat?
&Divide
-
+
Entity must be a line, arc, circle or ellipse.
-
+
@@ -8231,43 +8256,43 @@ Přejete si ho přepsat?
Delete Freehand
- Smazat "od ruky"
+ Smazat "od ruky"
&Delete Freehand
- &Smazat "od ruky"
+ &Smazat "od ruky"
Entities not in the same polyline.
-
+
Parent of second entity is not a polyline
-
+
Parent of second entity is NULL
-
+
One of the chosen entities is NULL
-
+
Parent of first entity is not a polyline
-
+
Parent of first entity is NULL
-
+
First entity is NULL
-
+
Second entity is NULL
-
+
@@ -8708,11 +8733,11 @@ Přejete si ho přepsat?
&Add node
-
+
- Add polyline's node
-
+ Add polyline's node
+
No Entity found.
@@ -8720,23 +8745,23 @@ Přejete si ho přepsat?
Entity must be a polyline.
-
+
Adding point is invalid.
-
+
Adding point is not on entity.
-
+
Specify polyline to add nodes
-
+
- Specify adding node's point
-
+ Specify adding node's point
+
@@ -8747,11 +8772,11 @@ Přejete si ho přepsat?
A&ppend node
-
+
- Append polyline's node
-
+ Append polyline's node
+
No Entity found.
@@ -8759,15 +8784,15 @@ Přejete si ho přepsat?
Entity must be a polyline.
-
+
Click somewhere near the beginning or end of existing polyline.
-
+
Specify the polyline somewhere near the beginning or end point
-
+
Specify next point or [%1]
@@ -8794,11 +8819,11 @@ Přejete si ho přepsat?
&Delete node
-
+
- Delete polyline's node
-
+ Delete polyline's node
+
No Entity found.
@@ -8806,23 +8831,23 @@ Přejete si ho přepsat?
Entity must be a polyline.
-
+
Adding point is invalid.
-
+
Adding point is not on entity.
-
+
Specify polyline to delete node
-
+
- Specify deleting node's point
-
+ Specify deleting node's point
+
@@ -8837,11 +8862,11 @@ Přejete si ho přepsat?
Delete &between two nodes
-
+
Delete between two nodes
-
+
No Entity found.
@@ -8849,42 +8874,42 @@ Přejete si ho přepsat?
Entity must be a polyline.
-
+
Deletinging point is invalid.
-
+
Deleting point is not on entity.
-
+
Deleteinging point is not on entity.
-
+
Specify polyline to delete between two nodes
-
+
Specify first node
-
+
Specify second node
-
+
RS_ActionPolylineEquidistant
Create &Equidistant Polylines
-
+
Create Equidistant Polylines
-
+
No Entity found.
@@ -8892,11 +8917,11 @@ Přejete si ho přepsat?
Entity must be a polyline.
-
+
Choose the original polyline
-
+
Cancel
@@ -8907,11 +8932,11 @@ Přejete si ho přepsat?
RS_ActionPolylineSegment
Create Polyline from Existing &Segments
-
+
Create Polyline from Existing Segments
-
+
No Entity found.
@@ -8919,11 +8944,11 @@ Přejete si ho přepsat?
Entity must be a line or arc.
-
+
Choose one of the segments on the original polyline
-
+
Cancel
@@ -8942,11 +8967,11 @@ Přejete si ho přepsat?
&Trim segments
-
+
- Trim polyline's segments
-
+ Trim polyline's segments
+
No Entity found.
@@ -8954,27 +8979,27 @@ Přejete si ho přepsat?
Entity must be a polyline.
-
+
Specifying point is invalid.
-
+
No Segment found on entity.
-
+
Specify polyline to trim
-
+
Specify first segment
-
+
Specify second segment
-
+
@@ -9020,7 +9045,7 @@ Přejete si ho přepsat?
Ctrl+K
-
+
@@ -9991,7 +10016,7 @@ Přejete si ho přepsat?
a
-
+
ci
@@ -10026,7 +10051,7 @@ Přejete si ho přepsat?
polyline
-
+
pa
@@ -10036,7 +10061,7 @@ Přejete si ho přepsat?
tm
modify - multi trim (extend)
-
+
da
@@ -10060,7 +10085,7 @@ Přejete si ho přepsat?
tm
-
+
xt
@@ -10128,7 +10153,7 @@ Přejete si ho přepsat?
sn
-
+
sm
@@ -10144,20 +10169,20 @@ Přejete si ho přepsat?
kill
-
+
k
-
+
back
-
+
b
back
-
+
diff --git a/ts/librecad_da.ts b/ts/librecad_da.ts
index 2a4ad1411b..c926bf26c9 100644
--- a/ts/librecad_da.ts
+++ b/ts/librecad_da.ts
@@ -1,7 +1,8 @@
+
-
+
Loading..
Henter..
@@ -275,8 +276,8 @@ Dato: %1
Komandolinie
- Block '%1'
- Blok '%1'
+ Block '%1'
+ Blok '%1'
Cannot open the file
@@ -332,7 +333,7 @@ Check venligst filretighederne.
Date: %1
- Dato: %1
+ Dato: %1
This is a %1 version which terminates
@@ -354,15 +355,15 @@ Du kan gemme dit arbejde nu.
&Spline
-
+
- Running script '%1'
-
+ Running script '%1'
+
- Inserting block '%1'
-
+ Inserting block '%1'
+
&Polyline
@@ -370,46 +371,66 @@ Du kan gemme dit arbejde nu.
CTRL+M
-
+
Insert Image
-
+
Auto-saving drawing...
-
+
Auto-saved drawing
-
+
Cannot auto-save the file
%1
Please check the permissions.
Auto-save disabled.
-
+
SVN Revision: %1
-
+
Help
-
+
- Bugger, I couldn't find the helpfiles on the filesystem.
-
+ Bugger, I couldn't find the helpfiles on the filesystem.
+
&Plugins
-
+
Import
-
+
+
+
+ &Toolbars
+
+
+
+ Compiled on: %1
+
+
+
+ Program Icons Supplied by
+
+
+
+ Splash and Logo supplied by
+
+
+
+ Main Website :
+
@@ -965,15 +986,15 @@ Auto-save disabled.
CTRL-G
-
+
Restrict&Vertically
-
+
&back
-
+
@@ -995,7 +1016,7 @@ Auto-save disabled.
QG_ArcTangentialOptions
Tangential Arc Options
-
+
Radius:
@@ -1044,8 +1065,8 @@ Auto-save disabled.
Omdøb blok
- Could not name block. A block named "%1" already exists.
- Kunne ikke navngive blok. En blok ved navn "%1" findes allerede.
+ Could not name block. A block named "%1" already exists.
+ Kunne ikke navngive blok. En blok ved navn "%1" findes allerede.
&OK
@@ -1164,7 +1185,7 @@ i et nyt vindue
Arc tangential to base entity with radius
-
+
@@ -1288,7 +1309,7 @@ i et nyt vindue
Area of polygon
-
+
@@ -1369,48 +1390,48 @@ i et nyt vindue
Hovedmenu
- Show menu "Lines"
- Vis menu "linier"
+ Show menu "Lines"
+ Vis menu "linier"
- Show menu "Arcs"
- Vis menu "buer"
+ Show menu "Arcs"
+ Vis menu "buer"
- Show menu "Circles"
- Vis menu "cirkler"
+ Show menu "Circles"
+ Vis menu "cirkler"
- Show menu "Points"
- Vis menu "punkter"
+ Show menu "Points"
+ Vis menu "punkter"
- Show menu "Measure"
- Vis menu "mål"
+ Show menu "Measure"
+ Vis menu "mål"
- Show menu "Ellipses"
- Vis menu "ellipser"
+ Show menu "Ellipses"
+ Vis menu "ellipser"
Hatches / Solid Fills
Skraveringer / Udfyld med farve
- Show menu "Edit"
- Vis menu "Rediger"
+ Show menu "Edit"
+ Vis menu "Rediger"
- Show menu "Dimensions"
- Vis menu "målsæt"
+ Show menu "Dimensions"
+ Vis menu "målsæt"
Texts
Tekst
- Show menu "Select"
- Vis menu "vælg"
+ Show menu "Select"
+ Vis menu "vælg"
Create Block
@@ -1426,11 +1447,11 @@ i et nyt vindue
Splines
-
+
Polylines
-
+
@@ -1539,7 +1560,7 @@ i et nyt vindue
QG_CadToolBarPolylines
Polylines
-
+
Back to main menu
@@ -1547,27 +1568,27 @@ i et nyt vindue
Create Polyline
-
+
Delete between two nodes
-
+
Add node
-
+
Delete node
-
+
Trim segments
-
+
Append node
-
+
@@ -1700,7 +1721,7 @@ i et nyt vindue
QG_CadToolBarSplines
Splines
-
+
Back to main menu
@@ -1708,7 +1729,7 @@ i et nyt vindue
Spline
-
+
@@ -1842,7 +1863,7 @@ i et nyt vindue
...
-
+
@@ -2076,7 +2097,7 @@ i et nyt vindue
Dimension
-
+
@@ -2170,7 +2191,7 @@ i et nyt vindue
Enable Preview
- Tilføj "vis eksempel"
+ Tilføj "vis eksempel"
&OK
@@ -2192,16 +2213,16 @@ i et nyt vindue
Velkommen
- <font size="+1"><b>Welcome to QCad</b>
+ <font size="+1"><b>Welcome to QCad</b>
</font>
<br>
Please choose the unit you want to use for new drawings and your preferred language.<br>
You can changes these settings later in the Options Dialog of QCad.
- <font size="+1"><b>Velkommen til QCad</b>
+ <font size="+1"><b>Velkommen til QCad</b>
</font>
<br>
Vælg venligst den måleenhed de ønsker at bruge i nye tegninger, og deres fortrukne sprog.<br>
-De kan altid ændre disse valg senere i dialogen "Rediger" i QCad.
+De kan altid ændre disse valg senere i dialogen "Rediger" i QCad.
Default Unit:
@@ -2366,7 +2387,7 @@ De kan altid ændre disse valg senere i dialogen "Rediger" i QCad.
...
-
+
@@ -2417,7 +2438,7 @@ De kan altid ændre disse valg senere i dialogen "Rediger" i QCad.
...
-
+
@@ -2468,11 +2489,11 @@ De kan altid ændre disse valg senere i dialogen "Rediger" i QCad.
...
-
+
Ctrl+S
-
+
@@ -2578,7 +2599,7 @@ De kan altid ændre disse valg senere i dialogen "Rediger" i QCad.
Radianer
- Surveyor's units
+ Surveyor's units
Geografisk
@@ -2586,8 +2607,8 @@ De kan altid ændre disse valg senere i dialogen "Rediger" i QCad.
Valg
- For the length formats 'Engineering' and 'Architectural', the unit must be set to Inch.
- For længde format i 'mekanisk' og 'arkitektur', skal enheden være sat til tommer.
+ For the length formats 'Engineering' and 'Architectural', the unit must be set to Inch.
+ For længde format i 'mekanisk' og 'arkitektur', skal enheden være sat til tommer.
Dimension line gap:
@@ -2687,11 +2708,11 @@ De kan altid ændre disse valg senere i dialogen "Rediger" i QCad.
Splines
-
+
Number of line segments per spline patch:
-
+
4
@@ -2846,11 +2867,11 @@ De kan altid ændre disse valg senere i dialogen "Rediger" i QCad.
G&rid Color:
- Gitte&r's farve:
+ Gitte&r's farve:
&Meta Grid Color:
- &Meta gitter's farve:
+ &Meta gitter's farve:
#404040
@@ -2962,42 +2983,42 @@ De kan altid ændre disse valg senere i dialogen "Rediger" i QCad.
Alt+U
-
+
Minimal Grid Spacing (px):
-
+
Program Defaults
-
+
Time between automatc saving of thedocument in minutes.
-
+
Auto save time:
-
+
QG_DlgOptionsVariables
Drawing Variables
-
+
Variable
-
+
Code
-
+
Value
-
+
&OK
@@ -3099,7 +3120,7 @@ De kan altid ændre disse valg senere i dialogen "Rediger" i QCad.
...
-
+
@@ -3150,7 +3171,7 @@ De kan altid ændre disse valg senere i dialogen "Rediger" i QCad.
...
-
+
@@ -3201,14 +3222,14 @@ De kan altid ændre disse valg senere i dialogen "Rediger" i QCad.
...
-
+
QG_DlgSpline
Spline
-
+
Layer:
@@ -3220,11 +3241,11 @@ De kan altid ændre disse valg senere i dialogen "Rediger" i QCad.
Degree:
-
+
Closed
-
+
1
@@ -3910,7 +3931,7 @@ De kan altid ændre disse valg senere i dialogen "Rediger" i QCad.
again Still No Text supplied.
-
+
@@ -4516,7 +4537,7 @@ De kan altid ændre disse valg senere i dialogen "Rediger" i QCad.
...
-
+
@@ -4558,11 +4579,11 @@ De kan altid ændre disse valg senere i dialogen "Rediger" i QCad.
Tangential
-
+
Tan Radius
-
+
Angle
@@ -4649,11 +4670,11 @@ De kan altid ændre disse valg senere i dialogen "Rediger" i QCad.
QG_SplineOptions
Spline Options
-
+
Degree:
-
+
1
@@ -4669,7 +4690,7 @@ De kan altid ændre disse valg senere i dialogen "Rediger" i QCad.
Closed
-
+
Undo
@@ -4851,12 +4872,12 @@ De kan altid ændre disse valg senere i dialogen "Rediger" i QCad.
Fjern lag
- Layer "%1" and all entities on it will be removed.
- Lag "%1" og alle dets enheder vil blive fjernet.
+ Layer "%1" and all entities on it will be removed.
+ Lag "%1" og alle dets enheder vil blive fjernet.
- Layer "%1" can never be removed.
- Lag "%1" kan aldrig fjernes.
+ Layer "%1" can never be removed.
+ Lag "%1" kan aldrig fjernes.
Layer Dialog
@@ -4867,16 +4888,16 @@ De kan altid ændre disse valg senere i dialogen "Rediger" i QCad.
Fjern blok
- Block "%1" and all its entities will be removed.
- Blok "%1" og dens enheder vil blive fjernet.
+ Block "%1" and all its entities will be removed.
+ Blok "%1" og dens enheder vil blive fjernet.
Layer Properties
Egenskaber for lag
- Layer with a name "%1" already exists. Please specify a different name.
- Et lag med navnet "%1" eksisterer allerede. Angiv venligst et andet navn.
+ Layer with a name "%1" already exists. Please specify a different name.
+ Et lag med navnet "%1" eksisterer allerede. Angiv venligst et andet navn.
@@ -4977,83 +4998,83 @@ Vil du overskrive den?
Inch
-
+
Foot
-
+
Mile
-
+
Millimeter
-
+
Centimeter
-
+
Meter
-
+
Kilometer
-
+
Microinch
-
+
Mil
-
+
Yard
-
+
Angstrom
-
+
Nanometer
-
+
Micron
-
+
Decimeter
-
+
Decameter
-
+
Hectometer
-
+
Gigameter
-
+
Astro
-
+
Lightyear
-
+
Parsec
-
+
Export Image
@@ -5065,12 +5086,16 @@ Vil du overskrive den?
Loading Library Paths..
- Henter biblioteksstier..
+ Henter biblioteksstier..
Loading File %1..
Henter fil %1..
+
+ Loading...
+
+
RS_ActionBlocksAdd
@@ -5197,8 +5222,8 @@ Vil du overskrive den?
Indtast vinkel:
-
-
+
+
Enter factor:
@@ -5610,11 +5635,11 @@ Vil du overskrive den?
RS_ActionDrawArcTangential
Arc: Tangential
-
+
Specify base entity
-
+
Cancel
@@ -5886,8 +5911,8 @@ Vil du overskrive den?
Indtast vinkel:
-
-
+
+
Enter factor:
@@ -6210,8 +6235,8 @@ Vil du overskrive den?
Angiv centrum
-
-
+
+
Specify a corner
@@ -6523,18 +6548,18 @@ Vil du overskrive den?
Undo disallowed due a fatal bug somewhere. Sorry.
-
+
RS_ActionDrawSpline
&Spline
-
+
Specify first control point
-
+
Cancel
@@ -6542,7 +6567,7 @@ Vil du overskrive den?
Specify next control point or [%1]
-
+
Back
@@ -6550,7 +6575,7 @@ Vil du overskrive den?
Specify next control point
-
+
Cannot undo: Not enough entities defined yet.
@@ -6689,7 +6714,7 @@ Vil du overskrive den?
&New...
-
+
@@ -6780,23 +6805,23 @@ Vil du overskrive den?
RS_ActionInfoArea
Polygonal Area
-
+
Area: %1
-
+
Circumference: %1
-
+
Point: %1/%2
-
+
Specify first point of polygon
-
+
Cancel
@@ -6804,11 +6829,11 @@ Vil du overskrive den?
Specify next point of polygon
-
+
Terminate
-
+
@@ -7056,16 +7081,16 @@ Vil du overskrive den?
Indtast vinkel:
-
-
+
+
Enter factor:
Indtast faktor:
- Cannot open file '%1'
-
+ Cannot open file '%1'
+
@@ -7189,11 +7214,11 @@ Vil du overskrive den?
&Divide
-
+
Entity must be a line, arc, circle or ellipse.
-
+
@@ -7239,35 +7264,35 @@ Vil du overskrive den?
Entities not in the same polyline.
-
+
Parent of second entity is not a polyline
-
+
Parent of second entity is NULL
-
+
One of the chosen entities is NULL
-
+
Parent of first entity is not a polyline
-
+
Parent of first entity is NULL
-
+
First entity is NULL
-
+
Second entity is NULL
-
+
@@ -7696,11 +7721,11 @@ Vil du overskrive den?
&Add node
-
+
- Add polyline's node
-
+ Add polyline's node
+
No Entity found.
@@ -7708,23 +7733,23 @@ Vil du overskrive den?
Entity must be a polyline.
-
+
Adding point is invalid.
-
+
Adding point is not on entity.
-
+
Specify polyline to add nodes
-
+
- Specify adding node's point
-
+ Specify adding node's point
+
@@ -7735,11 +7760,11 @@ Vil du overskrive den?
A&ppend node
-
+
- Append polyline's node
-
+ Append polyline's node
+
No Entity found.
@@ -7747,15 +7772,15 @@ Vil du overskrive den?
Entity must be a polyline.
-
+
Click somewhere near the beginning or end of existing polyline.
-
+
Specify the polyline somewhere near the beginning or end point
-
+
Specify next point or [%1]
@@ -7782,11 +7807,11 @@ Vil du overskrive den?
&Delete node
-
+
- Delete polyline's node
-
+ Delete polyline's node
+
No Entity found.
@@ -7794,23 +7819,23 @@ Vil du overskrive den?
Entity must be a polyline.
-
+
Adding point is invalid.
-
+
Adding point is not on entity.
-
+
Specify polyline to delete node
-
+
- Specify deleting node's point
-
+ Specify deleting node's point
+
@@ -7825,11 +7850,11 @@ Vil du overskrive den?
Delete &between two nodes
-
+
Delete between two nodes
-
+
No Entity found.
@@ -7837,42 +7862,42 @@ Vil du overskrive den?
Entity must be a polyline.
-
+
Deletinging point is invalid.
-
+
Deleting point is not on entity.
-
+
Deleteinging point is not on entity.
-
+
Specify polyline to delete between two nodes
-
+
Specify first node
-
+
Specify second node
-
+
RS_ActionPolylineEquidistant
Create &Equidistant Polylines
-
+
Create Equidistant Polylines
-
+
No Entity found.
@@ -7880,11 +7905,11 @@ Vil du overskrive den?
Entity must be a polyline.
-
+
Choose the original polyline
-
+
Cancel
@@ -7895,11 +7920,11 @@ Vil du overskrive den?
RS_ActionPolylineSegment
Create Polyline from Existing &Segments
-
+
Create Polyline from Existing Segments
-
+
No Entity found.
@@ -7907,11 +7932,11 @@ Vil du overskrive den?
Entity must be a line or arc.
-
+
Choose one of the segments on the original polyline
-
+
Cancel
@@ -7930,11 +7955,11 @@ Vil du overskrive den?
&Trim segments
-
+
- Trim polyline's segments
-
+ Trim polyline's segments
+
No Entity found.
@@ -7942,27 +7967,27 @@ Vil du overskrive den?
Entity must be a polyline.
-
+
Specifying point is invalid.
-
+
No Segment found on entity.
-
+
Specify polyline to trim
-
+
Specify first segment
-
+
Specify second segment
-
+
@@ -8008,7 +8033,7 @@ Vil du overskrive den?
Ctrl+K
-
+
@@ -8998,7 +9023,7 @@ Vil du overskrive den?
zv
zoom - previous
-
+
r
@@ -9006,7 +9031,7 @@ Vil du overskrive den?
polyline
-
+
pa
@@ -9016,7 +9041,7 @@ Vil du overskrive den?
tm
modify - multi trim (extend)
-
+
da
@@ -9040,7 +9065,7 @@ Vil du overskrive den?
tm
-
+
xt
@@ -9124,20 +9149,20 @@ Vil du overskrive den?
kill
-
+
k
-
+
back
-
+
b
back
-
+
diff --git a/ts/librecad_de.ts b/ts/librecad_de.ts
index 552d0a91cd..d749a20aca 100644
--- a/ts/librecad_de.ts
+++ b/ts/librecad_de.ts
@@ -1,7 +1,8 @@
+
-
+
Loading..
Lade..
@@ -306,8 +307,8 @@ Datum: %1
Kommandozeile
- Block '%1'
- Block '%1'
+ Block '%1'
+ Block '%1'
Cannot open the file
@@ -367,7 +368,7 @@ nicht speichern. Bitte prüfen Sie die Berechtigung.
Date: %1
- Datum: %1
+ Datum: %1
This is a %1 version which terminates
@@ -406,12 +407,12 @@ Sie können Ihre Arbeit jetzt speichern.
&Spline
- Running script '%1'
- Führe Skript '%1' aus
+ Running script '%1'
+ Führe Skript '%1' aus
- Inserting block '%1'
- Füge Block '%1' ein
+ Inserting block '%1'
+ Füge Block '%1' ein
&Polyline
@@ -419,42 +420,62 @@ Sie können Ihre Arbeit jetzt speichern.
CTRL+M
-
+
Insert Image
-
+
Auto-saving drawing...
-
+
Auto-saved drawing
-
+
Cannot auto-save the file
%1
Please check the permissions.
Auto-save disabled.
-
+
SVN Revision: %1
-
+
- Bugger, I couldn't find the helpfiles on the filesystem.
-
+ Bugger, I couldn't find the helpfiles on the filesystem.
+
&Plugins
-
+
Import
-
+
+
+
+ &Toolbars
+
+
+
+ Compiled on: %1
+
+
+
+ Program Icons Supplied by
+
+
+
+ Splash and Logo supplied by
+
+
+
+ Main Website :
+
@@ -2143,15 +2164,15 @@ wirklich schliessen?
CTRL-G
-
+
Restrict&Vertically
-
+
&back
-
+
@@ -2226,8 +2247,8 @@ wirklich schliessen?
Block umbenennen
- Could not name block. A block named "%1" already exists.
- Kann Block nicht benennen. Ein Block mit Name "%1" existiert bereits.
+ Could not name block. A block named "%1" already exists.
+ Kann Block nicht benennen. Ein Block mit Name "%1" existiert bereits.
&OK
@@ -2235,11 +2256,11 @@ wirklich schliessen?
Alt+O
-
+
Esc
-
+
@@ -2567,48 +2588,48 @@ Fenster editieren
Haupt
- Show menu "Lines"
- Menu "Linien" anzeigen
+ Show menu "Lines"
+ Menu "Linien" anzeigen
- Show menu "Arcs"
- Menu "Kreisbogen" anzeigen
+ Show menu "Arcs"
+ Menu "Kreisbogen" anzeigen
- Show menu "Circles"
- Menu "Kreis" anzeigen
+ Show menu "Circles"
+ Menu "Kreis" anzeigen
- Show menu "Points"
- Menu "Punkt" anzeigen
+ Show menu "Points"
+ Menu "Punkt" anzeigen
- Show menu "Measure"
- Menu "Messen" anzeigen
+ Show menu "Measure"
+ Menu "Messen" anzeigen
- Show menu "Ellipses"
- Menu "Ellipsen" anzeigen
+ Show menu "Ellipses"
+ Menu "Ellipsen" anzeigen
Hatches / Solid Fills
Schraffuren und Füllungen
- Show menu "Edit"
- Menu "Edit" anzeigen
+ Show menu "Edit"
+ Menu "Edit" anzeigen
- Show menu "Dimensions"
- Menu "Bemassen" anzeigen
+ Show menu "Dimensions"
+ Menu "Bemassen" anzeigen
Texts
Texte
- Show menu "Select"
- Menu "Selektieren" anzeigen
+ Show menu "Select"
+ Menu "Selektieren" anzeigen
Create Block
@@ -2619,8 +2640,8 @@ Fenster editieren
Raster Grafik
- Show menu "Splines"
- Menü "Splines" anzeigen
+ Show menu "Splines"
+ Menü "Splines" anzeigen
Points
@@ -3052,7 +3073,7 @@ Fenster editieren
...
-
+
@@ -3150,11 +3171,11 @@ Fenster editieren
Alt+O
-
+
Esc
-
+
@@ -3181,11 +3202,11 @@ Fenster editieren
Alt+O
-
+
Esc
-
+
@@ -3228,11 +3249,11 @@ Fenster editieren
Alt+O
-
+
Esc
-
+
@@ -3361,11 +3382,11 @@ Fenster editieren
Alt+O
-
+
Esc
-
+
@@ -3408,7 +3429,7 @@ Fenster editieren
Alt+O
-
+
Cancel
@@ -3422,12 +3443,12 @@ Fenster editieren
Willkommen
- <font size="+1"><b>Welcome to QCad</b>
+ <font size="+1"><b>Welcome to QCad</b>
</font>
<br>
Please choose the unit you want to use for new drawings and your preferred language.<br>
You can changes these settings later in the Options Dialog of QCad.
- <font size="+1"><b>Willkommen in QCad</b>
+ <font size="+1"><b>Willkommen in QCad</b>
</font>
<br>
Bitte wählen Sie die Masseinheit, die Sie für neue Zeichnungen verwenden wollen und Ihre bevorzugte Sprache.<br>
@@ -3455,7 +3476,7 @@ Sie können diese Einstellungen auch später im Optionen Dialog von QCad ändern
Enter
-
+
@@ -3518,7 +3539,7 @@ Sie können diese Einstellungen auch später im Optionen Dialog von QCad ändern
Esc
-
+
@@ -3565,7 +3586,7 @@ Sie können diese Einstellungen auch später im Optionen Dialog von QCad ändern
Esc
-
+
@@ -3624,11 +3645,11 @@ Sie können diese Einstellungen auch später im Optionen Dialog von QCad ändern
Esc
-
+
...
-
+
@@ -3695,15 +3716,15 @@ Sie können diese Einstellungen auch später im Optionen Dialog von QCad ändern
Alt+O
-
+
Esc
-
+
...
-
+
@@ -3754,7 +3775,7 @@ Sie können diese Einstellungen auch später im Optionen Dialog von QCad ändern
Esc
-
+
&Angle (a):
@@ -3782,11 +3803,11 @@ Sie können diese Einstellungen auch später im Optionen Dialog von QCad ändern
...
-
+
Ctrl+S
-
+
@@ -3932,7 +3953,7 @@ Sie können diese Einstellungen auch später im Optionen Dialog von QCad ändern
Gradianten
- Surveyor's units
+ Surveyor's units
Vermessung
@@ -3940,8 +3961,8 @@ Sie können diese Einstellungen auch später im Optionen Dialog von QCad ändern
Optionen
- For the length formats 'Engineering' and 'Architectural', the unit must be set to Inch.
- Für die Formatierungen 'Technisch' und 'Architektur' muss die Masseinheit auf Inch gesetzt sein.
+ For the length formats 'Engineering' and 'Architectural', the unit must be set to Inch.
+ Für die Formatierungen 'Technisch' und 'Architektur' muss die Masseinheit auf Inch gesetzt sein.
Extension line extension:
@@ -4021,11 +4042,11 @@ Sie können diese Einstellungen auch später im Optionen Dialog von QCad ändern
Esc
-
+
Alt+O
-
+
Grid Settings
@@ -4160,19 +4181,19 @@ Sie können diese Einstellungen auch später im Optionen Dialog von QCad ändern
0
-
+
50
-
+
100
-
+
200
-
+
Please restart QCad to apply all changes.
@@ -4228,7 +4249,7 @@ Sie können diese Einstellungen auch später im Optionen Dialog von QCad ändern
Alt+O
-
+
Cancel
@@ -4236,7 +4257,7 @@ Sie können diese Einstellungen auch später im Optionen Dialog von QCad ändern
Esc
-
+
Colors
@@ -4256,7 +4277,7 @@ Sie können diese Einstellungen auch später im Optionen Dialog von QCad ändern
#404040
-
+
Fontsize
@@ -4272,27 +4293,27 @@ Sie können diese Einstellungen auch später im Optionen Dialog von QCad ändern
6
-
+
7
-
+
8
-
+
9
-
+
10
-
+
11
-
+
12
@@ -4304,19 +4325,19 @@ Sie können diese Einstellungen auch später im Optionen Dialog von QCad ändern
#000000
-
+
#ffffff
-
+
#c0c0c0
-
+
#808080
-
+
A&utomatically scale grid
@@ -4328,11 +4349,11 @@ Sie können diese Einstellungen auch später im Optionen Dialog von QCad ändern
#a54747
-
+
#739373
-
+
&Highlighted Color:
@@ -4344,15 +4365,15 @@ Sie können diese Einstellungen auch später im Optionen Dialog von QCad ändern
4
-
+
15
-
+
20
-
+
Please restart the application to apply all changes.
@@ -4360,7 +4381,7 @@ Sie können diese Einstellungen auch später im Optionen Dialog von QCad ändern
Alt+S
-
+
Alt+U
@@ -4372,34 +4393,34 @@ Sie können diese Einstellungen auch später im Optionen Dialog von QCad ändern
Program Defaults
-
+
Time between automatc saving of thedocument in minutes.
-
+
Auto save time:
-
+
QG_DlgOptionsVariables
Drawing Variables
-
+
Variable
-
+
Code
-
+
Value
-
+
&OK
@@ -4407,7 +4428,7 @@ Sie können diese Einstellungen auch später im Optionen Dialog von QCad ändern
Alt+O
-
+ Alt+O
Cancel
@@ -4415,7 +4436,7 @@ Sie können diese Einstellungen auch später im Optionen Dialog von QCad ändern
Esc
-
+ Esc
@@ -4454,7 +4475,7 @@ Sie können diese Einstellungen auch später im Optionen Dialog von QCad ändern
Esc
-
+
@@ -4509,7 +4530,7 @@ Sie können diese Einstellungen auch später im Optionen Dialog von QCad ändern
Esc
-
+
&Delete Original
@@ -4537,7 +4558,7 @@ Sie können diese Einstellungen auch später im Optionen Dialog von QCad ändern
...
-
+
@@ -4620,7 +4641,7 @@ Sie können diese Einstellungen auch später im Optionen Dialog von QCad ändern
...
-
+
@@ -4675,7 +4696,7 @@ Sie können diese Einstellungen auch später im Optionen Dialog von QCad ändern
Esc
-
+
&Factor (f):
@@ -4703,7 +4724,7 @@ Sie können diese Einstellungen auch später im Optionen Dialog von QCad ändern
...
-
+
@@ -4933,435 +4954,435 @@ Sie können diese Einstellungen auch später im Optionen Dialog von QCad ändern
[0000-007F] Basic Latin
-
+
[0080-00FF] Latin-1 Supplementary
-
+
[0100-017F] Latin Extended-A
-
+
[0180-024F] Latin Extended-B
-
+
[0250-02AF] IPA Extensions
-
+
[02B0-02FF] Spacing Modifier Letters
-
+
[0300-036F] Combining Diacritical Marks
-
+
[0370-03FF] Greek and Coptic
-
+
[0400-04FF] Cyrillic
-
+
[0500-052F] Cyrillic Supplementary
-
+
[0530-058F] Armenian
-
+
[0590-05FF] Hebrew
-
+
[0600-06FF] Arabic
-
+
[0700-074F] Syriac
-
+
[0780-07BF] Thaana
-
+
[0900-097F] Devanagari
-
+
[0980-09FF] Bengali
-
+
[0A00-0A7F] Gurmukhi
-
+
[0A80-0AFF] Gujarati
-
+
[0B00-0B7F] Oriya
-
+
[0B80-0BFF] Tamil
-
+
[0C00-0C7F] Telugu
-
+
[0C80-0CFF] Kannada
-
+
[0D00-0D7F] Malayalam
-
+
[0D80-0DFF] Sinhala
-
+
[0E00-0E7F] Thai
-
+
[0E80-0EFF] Lao
-
+
[0F00-0FFF] Tibetan
-
+
[1000-109F] Myanmar
-
+
[10A0-10FF] Georgian
-
+
[1100-11FF] Hangul Jamo
-
+
[1200-137F] Ethiopic
-
+
[13A0-13FF] Cherokee
-
+
[1400-167F] Unified Canadian Aboriginal Syllabic
-
+
[1680-169F] Ogham
-
+
[16A0-16FF] Runic
-
+
[1700-171F] Tagalog
-
+
[1720-173F] Hanunoo
-
+
[1740-175F] Buhid
-
+
[1760-177F] Tagbanwa
-
+
[1780-17FF] Khmer
-
+
[1800-18AF] Mongolian
-
+
[1E00-1EFF] Latin Extended Additional
-
+
[1F00-1FFF] Greek Extended
-
+
[2000-206F] General Punctuation
-
+
[2070-209F] Superscripts and Subscripts
-
+
[20A0-20CF] Currency Symbols
-
+
[20D0-20FF] Combining Marks for Symbols
-
+
[2100-214F] Letterlike Symbols
-
+
[2150-218F] Number Forms
-
+
[2190-21FF] Arrows
-
+
[2200-22FF] Mathematical Operators
-
+
[2300-23FF] Miscellaneous Technical
-
+
[2400-243F] Control Pictures
-
+
[2440-245F] Optical Character Recognition
-
+
[2460-24FF] Enclosed Alphanumerics
-
+
[2500-257F] Box Drawing
-
+
[2580-259F] Block Elements
-
+
[25A0-25FF] Geometric Shapes
-
+
[2600-26FF] Miscellaneous Symbols
-
+
[2700-27BF] Dingbats
-
+
[27C0-27EF] Miscellaneous Mathematical Symbols-A
-
+
[27F0-27FF] Supplemental Arrows-A
-
+
[2800-28FF] Braille Patterns
-
+
[2900-297F] Supplemental Arrows-B
-
+
[2980-29FF] Miscellaneous Mathematical Symbols-B
-
+
[2A00-2AFF] Supplemental Mathematical Operators
-
+
[2E80-2EFF] CJK Radicals Supplement
-
+
[2F00-2FDF] Kangxi Radicals
-
+
[2FF0-2FFF] Ideographic Description Characters
-
+
[3000-303F] CJK Symbols and Punctuation
-
+
[3040-309F] Hiragana
-
+
[30A0-30FF] Katakana
-
+
[3100-312F] Bopomofo
-
+
[3130-318F] Hangul Compatibility Jamo
-
+
[3190-319F] Kanbun
-
+
[31A0-31BF] Bopomofo Extended
-
+
[3200-32FF] Enclosed CJK Letters and Months
-
+
[3300-33FF] CJK Compatibility
-
+
[3400-4DBF] CJK Unified Ideographs Extension A
-
+
[4E00-9FAF] CJK Unified Ideographs
-
+
[A000-A48F] Yi Syllables
-
+
[A490-A4CF] Yi Radicals
-
+
[AC00-D7AF] Hangul Syllables
-
+
[D800-DBFF] High Surrogates
-
+
[DC00-DFFF] Low Surrogate Area
-
+
[E000-F8FF] Private Use Area
-
+
[F900-FAFF] CJK Compatibility Ideographs
-
+
[FB00-FB4F] Alphabetic Presentation Forms
-
+
[FB50-FDFF] Arabic Presentation Forms-A
-
+
[FE00-FE0F] Variation Selectors
-
+
[FE20-FE2F] Combining Half Marks
-
+
[FE30-FE4F] CJK Compatibility Forms
-
+
[FE50-FE6F] Small Form Variants
-
+
[FE70-FEFF] Arabic Presentation Forms-B
-
+
[FF00-FFEF] Halfwidth and Fullwidth Forms
-
+
[FFF0-FFFF] Specials
-
+
[10300-1032F] Old Italic
-
+
[10330-1034F] Gothic
-
+
[10400-1044F] Deseret
-
+
[1D000-1D0FF] Byzantine Musical Symbols
-
+
[1D100-1D1FF] Musical Symbols
-
+
[1D400-1D7FF] Mathematical Alphanumeric Symbols
-
+
[20000-2A6DF] CJK Unified Ideographs Extension B
-
+
[2F800-2FA1F] CJK Compatibility Ideographs Supplement
-
+
[E0000-E007F] Tags
-
+
[F0000-FFFFD] Supplementary Private Use Area-A
-
+
[100000-10FFFD] Supplementary Private Use Area-B
-
+
&Height:
@@ -5381,7 +5402,7 @@ Sie können diese Einstellungen auch später im Optionen Dialog von QCad ändern
Esc
-
+
Alt+D
@@ -5424,7 +5445,7 @@ Sie können diese Einstellungen auch später im Optionen Dialog von QCad ändern
QCad
-
+
&Close
@@ -5440,7 +5461,7 @@ Sie können diese Einstellungen auch später im Optionen Dialog von QCad ändern
again Still No Text supplied.
-
+
@@ -5478,11 +5499,11 @@ Sie können diese Einstellungen auch später im Optionen Dialog von QCad ändern
640
-
+
480
-
+
Width:
@@ -5514,7 +5535,7 @@ Sie können diese Einstellungen auch später im Optionen Dialog von QCad ändern
Alt+O
-
+
Cancel
@@ -5522,7 +5543,7 @@ Sie können diese Einstellungen auch später im Optionen Dialog von QCad ändern
Esc
-
+
Resolution:
@@ -5542,11 +5563,11 @@ Sie können diese Einstellungen auch später im Optionen Dialog von QCad ändern
3
-
+
4
-
+
5
@@ -5554,43 +5575,43 @@ Sie können diese Einstellungen auch später im Optionen Dialog von QCad ändern
10
-
+
15
-
+
20
-
+
25
-
+
50
-
+
75
-
+
100
-
+
150
-
+
300
-
+
600
-
+
1200
@@ -5679,11 +5700,11 @@ Sie können diese Einstellungen auch später im Optionen Dialog von QCad ändern
Alt+O
-
+
Esc
-
+
@@ -6070,7 +6091,7 @@ Sie können diese Einstellungen auch später im Optionen Dialog von QCad ändern
...
-
+
@@ -6112,11 +6133,11 @@ Sie können diese Einstellungen auch später im Optionen Dialog von QCad ändern
Tangential
-
+
Tan Radius
-
+
Angle
@@ -6295,99 +6316,99 @@ Sie können diese Einstellungen auch später im Optionen Dialog von QCad ändern
0.00mm
-
+
0.05mm
-
+
0.09mm
-
+
0.13mm (ISO)
-
+
0.15mm
-
+
0.18mm (ISO)
-
+
0.20mm
-
+
0.25mm (ISO)
-
+
0.30mm
-
+
0.35mm (ISO)
-
+
0.40mm
-
+
0.50mm (ISO)
-
+
0.53mm
-
+
0.60mm
-
+
0.70mm (ISO)
-
+
0.80mm
-
+
0.90mm
-
+
1.00mm (ISO)
-
+
1.06mm
-
+
1.20mm
-
+
1.40mm (ISO)
-
+
1.58mm
-
+
2.00mm (ISO)
-
+
2.11mm
-
+
- Unchanged -
@@ -6405,12 +6426,12 @@ Sie können diese Einstellungen auch später im Optionen Dialog von QCad ändern
Layer löschen
- Layer "%1" and all entities on it will be removed.
- Layer "%1" und alle Objekte auf diesem Layer werden gelöscht.
+ Layer "%1" and all entities on it will be removed.
+ Layer "%1" und alle Objekte auf diesem Layer werden gelöscht.
- Layer "%1" can never be removed.
- Layer "%1" kann nie entfernt werden.
+ Layer "%1" can never be removed.
+ Layer "%1" kann nie entfernt werden.
Layer Dialog
@@ -6421,16 +6442,16 @@ Sie können diese Einstellungen auch später im Optionen Dialog von QCad ändern
Block löschen
- Block "%1" and all its entities will be removed.
- Block "%1" und alle Objekte des Blocks werden gelöscht.
+ Block "%1" and all its entities will be removed.
+ Block "%1" und alle Objekte des Blocks werden gelöscht.
Layer Properties
Layer Eigenschaften
- Layer with a name "%1" already exists. Please specify a different name.
- Ein Layer mit Name "%1" existiert bereits. Bitte wählen Sie einen anderen Namen.
+ Layer with a name "%1" already exists. Please specify a different name.
+ Ein Layer mit Name "%1" existiert bereits. Bitte wählen Sie einen anderen Namen.
@@ -6467,39 +6488,39 @@ Wollen Sie die Datei überschreiben?
Windows Bitmap
-
+
Joint Photographic Experts Group
-
+
Multiple-image Network Graphics
-
+
Portable Bit Map
-
+
Portable Grey Map
-
+
Portable Network Graphic
-
+
Portable Pixel Map
-
+
X Bitmap Format
-
+
X Pixel Map
-
+
All Image Files (%1)
@@ -6507,15 +6528,15 @@ Wollen Sie die Datei überschreiben?
Graphics Interchange Format
-
+
Drawing Exchange %1
-
+
QCad 1.x file %1
-
+
Font %1
@@ -6527,87 +6548,87 @@ Wollen Sie die Datei überschreiben?
None
-
+
Inch
-
+
Foot
-
+
Mile
-
+
Millimeter
-
+
Centimeter
-
+
Meter
-
+
Kilometer
-
+
Microinch
-
+
Mil
-
+
Yard
-
+
Angstrom
-
+
Nanometer
-
+
Micron
-
+
Decimeter
-
+
Decameter
-
+
Hectometer
-
+
Gigameter
-
+
Astro
-
+
Lightyear
-
+
Parsec
-
+
Export Image
@@ -6619,12 +6640,16 @@ Wollen Sie die Datei überschreiben?
Loading Library Paths..
- Lade Bibliothek Pfade..
+ Lade Bibliothek Pfade..
Loading File %1..
Lade Datei %1..
+
+ Loading...
+
+
RS_ActionBlocksAdd
@@ -6824,8 +6849,8 @@ Wollen Sie die Datei überschreiben?
Block ein&fügen
-
-
+
+
@@ -7542,8 +7567,8 @@ Wollen Sie die Datei überschreiben?
Bild (Bitmap) einfügen
-
-
+
+
@@ -7891,8 +7916,8 @@ Wollen Sie die Datei überschreiben?
Polygon mit Zentrum und Ecke zeichnen
-
-
+
+
@@ -8205,7 +8230,7 @@ Wollen Sie die Datei überschreiben?
Undo disallowed due a fatal bug somewhere. Sorry.
-
+
@@ -8387,7 +8412,7 @@ Wollen Sie die Datei überschreiben?
&New...
-
+
@@ -8766,12 +8791,12 @@ Wollen Sie die Datei überschreiben?
Fügt ein Objekt aus der Teile Bibliothek ein.
-
-
+
+
- Cannot open file '%1'
- Kann Datei '%1' nicht öffnen
+ Cannot open file '%1'
+ Kann Datei '%1' nicht öffnen
@@ -8903,11 +8928,11 @@ Wollen Sie die Datei überschreiben?
&Divide
-
+
Entity must be a line, arc, circle or ellipse.
-
+
@@ -9471,11 +9496,11 @@ Wollen Sie die Datei überschreiben?
&Add node
-
+
- Add polyline's node
-
+ Add polyline's node
+
No Entity found.
@@ -9483,23 +9508,23 @@ Wollen Sie die Datei überschreiben?
Entity must be a polyline.
-
+
Adding point is invalid.
-
+
Adding point is not on entity.
-
+
Specify polyline to add nodes
-
+
- Specify adding node's point
-
+ Specify adding node's point
+
@@ -9542,11 +9567,11 @@ Wollen Sie die Datei überschreiben?
A&ppend node
-
+
- Append polyline's node
-
+ Append polyline's node
+
No Entity found.
@@ -9554,15 +9579,15 @@ Wollen Sie die Datei überschreiben?
Entity must be a polyline.
-
+
Click somewhere near the beginning or end of existing polyline.
-
+
Specify the polyline somewhere near the beginning or end point
-
+
Specify next point or [%1]
@@ -9570,7 +9595,7 @@ Wollen Sie die Datei überschreiben?
Back
-
+
Specify next point
@@ -9620,8 +9645,8 @@ Wollen Sie die Datei überschreiben?
Knoten &löschen
- Delete polyline's node
-
+ Delete polyline's node
+
No Entity found.
@@ -9629,23 +9654,23 @@ Wollen Sie die Datei überschreiben?
Entity must be a polyline.
-
+
Adding point is invalid.
-
+
Adding point is not on entity.
-
+
Specify polyline to delete node
-
+
- Specify deleting node's point
-
+ Specify deleting node's point
+
@@ -9700,7 +9725,7 @@ Wollen Sie die Datei überschreiben?
Delete &between two nodes
-
+
Delete between two nodes
@@ -9712,42 +9737,42 @@ Wollen Sie die Datei überschreiben?
Entity must be a polyline.
-
+
Deletinging point is invalid.
-
+
Deleting point is not on entity.
-
+
Deleteinging point is not on entity.
-
+
Specify polyline to delete between two nodes
-
+
Specify first node
-
+
Specify second node
-
+
RS_ActionPolylineEquidistant
Create &Equidistant Polylines
-
+
Create Equidistant Polylines
-
+
No Entity found.
@@ -9755,11 +9780,11 @@ Wollen Sie die Datei überschreiben?
Entity must be a polyline.
-
+
Choose the original polyline
-
+
Cancel
@@ -9770,11 +9795,11 @@ Wollen Sie die Datei überschreiben?
RS_ActionPolylineSegment
Create Polyline from Existing &Segments
-
+
Create Polyline from Existing Segments
-
+
No Entity found.
@@ -9782,11 +9807,11 @@ Wollen Sie die Datei überschreiben?
Entity must be a line or arc.
-
+
Choose one of the segments on the original polyline
-
+
Cancel
@@ -9836,8 +9861,8 @@ Wollen Sie die Datei überschreiben?
Segmente &trimmen
- Trim polyline's segments
-
+ Trim polyline's segments
+
No Entity found.
@@ -9845,19 +9870,19 @@ Wollen Sie die Datei überschreiben?
Entity must be a polyline.
-
+
Specifying point is invalid.
-
+
No Segment found on entity.
-
+
Specify polyline to trim
-
+
@@ -9903,7 +9928,7 @@ Wollen Sie die Datei überschreiben?
Ctrl+K
-
+
@@ -10614,12 +10639,12 @@ Wollen Sie die Datei überschreiben?
ci
circle
-
+
zw
zoom - window
-
+
zoom - window
@@ -10628,7 +10653,7 @@ Wollen Sie die Datei überschreiben?
za
zoom - auto
-
+
zoom - auto
@@ -10637,7 +10662,7 @@ Wollen Sie die Datei überschreiben?
zp
zoom - pan
-
+
zoom - pan
@@ -10646,216 +10671,216 @@ Wollen Sie die Datei überschreiben?
li
line
-
+
re
rectangle
-
+
rp
regular polygon
-
+
c2
2 point circle
-
+
c3
3 point circle
-
+
ar
arc
-
+
a3
3 point arc
-
+
ep
ellipse
-
+
tx
text
-
+
mt
text
-
+
da
dimension - aligned
-
+
dh
dimension - horizontal
-
+
dv
dimension - vertical
-
+
dr
dimension - linear
-
+
ld
dimension - leader
-
+
rd
redraw
-
+
zi
zoom - in
-
+
zo
zoom - out
-
+
os
snap - none
-
+
sg
snap - grid
-
+
se
snap - end
-
+
si
snap - intersection
-
+
sn
snap - center
-
+
sm
snap - middle
-
+
sn
snap - nearest
-
+
np
snap - nearest point
-
+
fr*
layers - freeze all
-
+
th*
layers - defreeze all
-
+
tn
Deselect all
-
+
ch
modify - bevel (chamfer)
-
+
xt
modify - trim (extend)
-
+
rm
modify - trim
-
+
mv
modify - move
-
+
mi
modify - mirror
-
+
ro
modify - rotate
-
+
sz
modify - scale
-
+
ss
modify - stretch
-
+
er
modify - delete (erase)
-
+
oo
modify - undo (oops)
-
+
uu
modify - redo
-
+
xp
modify - explode
-
+
ex
modify - explode
-
+
dimregen
-
+
po
@@ -10920,23 +10945,23 @@ Wollen Sie die Datei überschreiben?
da
-
+
dh
-
+
dr
-
+
dv
-
+
ld
-
+
tm
@@ -10944,100 +10969,100 @@ Wollen Sie die Datei überschreiben?
xt
-
+
rm
-
+
mv
-
+
ch
-
+
mi
-
+
ro
-
+
sz
-
+
ss
-
+
er
-
+
oo
-
+
uu
-
+
xp
-
+
os
-
+
sg
-
+
se
-
+
si
-
+
sn
-
+
sm
-
+
np
-
+
tn
-
+
kill
-
+
k
-
+
back
-
+
b
back
-
+
diff --git a/ts/librecad_el.ts b/ts/librecad_el.ts
index 8c180d8deb..508fc2a796 100644
--- a/ts/librecad_el.ts
+++ b/ts/librecad_el.ts
@@ -1,7 +1,8 @@
+
-
+
Loading..
Φόρτωση..
@@ -170,7 +171,7 @@
Exiting application...
- Έξοδος απ'την εφαρμογή...
+ Έξοδος απ'την εφαρμογή...
About...
@@ -275,8 +276,8 @@ Date: %1
Γραμμή εντολών
- Block '%1'
- Μπλόκ '%1'
+ Block '%1'
+ Μπλόκ '%1'
Cannot open the file
@@ -332,7 +333,7 @@ Please check the permissions.
Date: %1
- Ημερ/νία: %1
+ Ημερ/νία: %1
This is a %1 version which terminates
@@ -357,12 +358,12 @@ You can save your work now.
&Καμπύλη
- Running script '%1'
- Εκτέλεση script '%1'
+ Running script '%1'
+ Εκτέλεση script '%1'
- Inserting block '%1'
- Εισαγωγή μπλόκ '%1'
+ Inserting block '%1'
+ Εισαγωγή μπλόκ '%1'
&Polyline
@@ -374,42 +375,62 @@ You can save your work now.
Insert Image
-
+
Auto-saving drawing...
-
+
Auto-saved drawing
-
+
Cannot auto-save the file
%1
Please check the permissions.
Auto-save disabled.
-
+
SVN Revision: %1
-
+
Help
-
+
- Bugger, I couldn't find the helpfiles on the filesystem.
-
+ Bugger, I couldn't find the helpfiles on the filesystem.
+
&Plugins
-
+
Import
-
+
+
+
+ &Toolbars
+
+
+
+ Compiled on: %1
+
+
+
+ Program Icons Supplied by
+
+
+
+ Splash and Logo supplied by
+
+
+
+ Main Website :
+
@@ -469,7 +490,7 @@ Auto-save disabled.
Quits the application
- Εξοδος απ'την εφαρμογή
+ Εξοδος απ'την εφαρμογή
Zoom in
@@ -1913,15 +1934,15 @@ Auto-save disabled.
CTRL-G
-
+
Restrict&Vertically
-
+
&back
-
+
@@ -1992,8 +2013,8 @@ Auto-save disabled.
Μετονομασία Μπλόκ
- Could not name block. A block named "%1" already exists.
- Δεν μπορώ να ονομάσω το μπλόκ. Μπλόκ με όνομα "%1" υπάρχει ίδη.
+ Could not name block. A block named "%1" already exists.
+ Δεν μπορώ να ονομάσω το μπλόκ. Μπλόκ με όνομα "%1" υπάρχει ίδη.
&OK
@@ -2317,48 +2338,48 @@ in a separate window
Κεντρικό
- Show menu "Lines"
- Εμφάνιση μενού "Γραμμές"
+ Show menu "Lines"
+ Εμφάνιση μενού "Γραμμές"
- Show menu "Arcs"
- Εμφάνιση μενού "Τόξα"
+ Show menu "Arcs"
+ Εμφάνιση μενού "Τόξα"
- Show menu "Circles"
- Εμφάνιση μενού "Κύκλοι"
+ Show menu "Circles"
+ Εμφάνιση μενού "Κύκλοι"
- Show menu "Points"
- Εμφάνιση μενού "Σημεία"
+ Show menu "Points"
+ Εμφάνιση μενού "Σημεία"
- Show menu "Measure"
- Εμφάνιση μενού "Μέτρηση"
+ Show menu "Measure"
+ Εμφάνιση μενού "Μέτρηση"
- Show menu "Ellipses"
- Εμφάνιση μενού "Ελείψεις"
+ Show menu "Ellipses"
+ Εμφάνιση μενού "Ελείψεις"
Hatches / Solid Fills
Διαγραμίσεις / Γεμίσματα
- Show menu "Edit"
- Εμφάνιση μενού "Διόρθωση"
+ Show menu "Edit"
+ Εμφάνιση μενού "Διόρθωση"
- Show menu "Dimensions"
- Εμφάνιση μενού "Διαστάσεις"
+ Show menu "Dimensions"
+ Εμφάνιση μενού "Διαστάσεις"
Texts
Κείμενα
- Show menu "Select"
- Εμφάνιση μενού "Επέλεξε"
+ Show menu "Select"
+ Εμφάνιση μενού "Επέλεξε"
Create Block
@@ -2409,7 +2430,7 @@ in a separate window
Explode
-
+
Delete
@@ -2574,7 +2595,7 @@ in a separate window
Continue action
- Συνέχεια "δράσης"
+ Συνέχεια "δράσης"
@@ -2706,7 +2727,7 @@ in a separate window
Magenta
-
+
Black / White
@@ -2794,7 +2815,7 @@ in a separate window
...
-
+
@@ -3144,12 +3165,12 @@ in a separate window
Καλώς ήλθατε
- <font size="+1"><b>Welcome to QCad</b>
+ <font size="+1"><b>Welcome to QCad</b>
</font>
<br>
Please choose the unit you want to use for new drawings and your preferred language.<br>
You can changes these settings later in the Options Dialog of QCad.
- <font size="+1"><b>Καλώς ήλθατε στο QCad</b>
+ <font size="+1"><b>Καλώς ήλθατε στο QCad</b>
</font>
<br>
Παρακαλώ επιλέξτε τή μονάδα που θέλετε να χρησιμοποιείτε για τα νέα σχέδια και τη γλώσσα που προτιμάτε<br>
@@ -3318,7 +3339,7 @@ You can changes these settings later in the Options Dialog of QCad.
...
-
+
@@ -3369,7 +3390,7 @@ You can changes these settings later in the Options Dialog of QCad.
...
-
+
@@ -3420,11 +3441,11 @@ You can changes these settings later in the Options Dialog of QCad.
...
-
+
Ctrl+S
-
+
@@ -3503,7 +3524,7 @@ You can changes these settings later in the Options Dialog of QCad.
2
-
+
5
@@ -3515,19 +3536,19 @@ You can changes these settings later in the Options Dialog of QCad.
Gradians
-
+
- Surveyor's units
-
+ Surveyor's units
+
Options
Επιλογές
- For the length formats 'Engineering' and 'Architectural', the unit must be set to Inch.
- Γιά τους τρόπους μέτρησης "Μηχανολογικό" και "Αρχιτεκτονικό", η μονάδα πρέπει να είναι η ίντσα.
+ For the length formats 'Engineering' and 'Architectural', the unit must be set to Inch.
+ Γιά τους τρόπους μέτρησης "Μηχανολογικό" και "Αρχιτεκτονικό", η μονάδα πρέπει να είναι η ίντσα.
Extension line extension:
@@ -3938,34 +3959,34 @@ You can changes these settings later in the Options Dialog of QCad.
Program Defaults
-
+
Time between automatc saving of thedocument in minutes.
-
+
Auto save time:
-
+
QG_DlgOptionsVariables
Drawing Variables
-
+
Variable
-
+
Code
-
+
Value
-
+
&OK
@@ -3973,7 +3994,7 @@ You can changes these settings later in the Options Dialog of QCad.
Alt+O
-
+
Cancel
@@ -4067,7 +4088,7 @@ You can changes these settings later in the Options Dialog of QCad.
...
-
+
@@ -4118,7 +4139,7 @@ You can changes these settings later in the Options Dialog of QCad.
...
-
+
@@ -4169,7 +4190,7 @@ You can changes these settings later in the Options Dialog of QCad.
...
-
+
@@ -4387,27 +4408,27 @@ You can changes these settings later in the Options Dialog of QCad.
[0080-00FF] Latin-1 Supplementary
-
+
[0100-017F] Latin Extended-A
-
+
[0180-024F] Latin Extended-B
-
+
[0250-02AF] IPA Extensions
-
+
[02B0-02FF] Spacing Modifier Letters
-
+
[0300-036F] Combining Diacritical Marks
-
+
[0370-03FF] Greek and Coptic
@@ -4419,7 +4440,7 @@ You can changes these settings later in the Options Dialog of QCad.
[0500-052F] Cyrillic Supplementary
-
+
[0530-058F] Armenian
@@ -4439,27 +4460,27 @@ You can changes these settings later in the Options Dialog of QCad.
[0780-07BF] Thaana
-
+
[0900-097F] Devanagari
-
+
[0980-09FF] Bengali
-
+
[0A00-0A7F] Gurmukhi
-
+
[0A80-0AFF] Gujarati
-
+
[0B00-0B7F] Oriya
-
+
[0B80-0BFF] Tamil
@@ -4467,7 +4488,7 @@ You can changes these settings later in the Options Dialog of QCad.
[0C00-0C7F] Telugu
-
+
[0C80-0CFF] Kannada
@@ -4475,11 +4496,11 @@ You can changes these settings later in the Options Dialog of QCad.
[0D00-0D7F] Malayalam
-
+
[0D80-0DFF] Sinhala
-
+
[0E00-0E7F] Thai
@@ -4503,7 +4524,7 @@ You can changes these settings later in the Options Dialog of QCad.
[1100-11FF] Hangul Jamo
-
+
[1200-137F] Ethiopic
@@ -4515,11 +4536,11 @@ You can changes these settings later in the Options Dialog of QCad.
[1400-167F] Unified Canadian Aboriginal Syllabic
-
+
[1680-169F] Ogham
-
+
[16A0-16FF] Runic
@@ -4527,19 +4548,19 @@ You can changes these settings later in the Options Dialog of QCad.
[1700-171F] Tagalog
-
+
[1720-173F] Hanunoo
-
+
[1740-175F] Buhid
-
+
[1760-177F] Tagbanwa
-
+
[1780-17FF] Khmer
@@ -4559,11 +4580,11 @@ You can changes these settings later in the Options Dialog of QCad.
[2000-206F] General Punctuation
-
+
[2070-209F] Superscripts and Subscripts
-
+
[20A0-20CF] Currency Symbols
@@ -4571,15 +4592,15 @@ You can changes these settings later in the Options Dialog of QCad.
[20D0-20FF] Combining Marks for Symbols
-
+
[2100-214F] Letterlike Symbols
-
+
[2150-218F] Number Forms
-
+
[2190-21FF] Arrows
@@ -4611,7 +4632,7 @@ You can changes these settings later in the Options Dialog of QCad.
[2580-259F] Block Elements
-
+
[25A0-25FF] Geometric Shapes
@@ -4623,7 +4644,7 @@ You can changes these settings later in the Options Dialog of QCad.
[2700-27BF] Dingbats
-
+
[27C0-27EF] Miscellaneous Mathematical Symbols-A
@@ -4631,7 +4652,7 @@ You can changes these settings later in the Options Dialog of QCad.
[27F0-27FF] Supplemental Arrows-A
-
+
[2800-28FF] Braille Patterns
@@ -4639,7 +4660,7 @@ You can changes these settings later in the Options Dialog of QCad.
[2900-297F] Supplemental Arrows-B
-
+
[2980-29FF] Miscellaneous Mathematical Symbols-B
@@ -4647,23 +4668,23 @@ You can changes these settings later in the Options Dialog of QCad.
[2A00-2AFF] Supplemental Mathematical Operators
-
+
[2E80-2EFF] CJK Radicals Supplement
-
+
[2F00-2FDF] Kangxi Radicals
-
+
[2FF0-2FFF] Ideographic Description Characters
-
+
[3000-303F] CJK Symbols and Punctuation
-
+
[3040-309F] Hiragana
@@ -4675,55 +4696,55 @@ You can changes these settings later in the Options Dialog of QCad.
[3100-312F] Bopomofo
-
+
[3130-318F] Hangul Compatibility Jamo
-
+
[3190-319F] Kanbun
-
+
[31A0-31BF] Bopomofo Extended
-
+
[3200-32FF] Enclosed CJK Letters and Months
-
+
[3300-33FF] CJK Compatibility
-
+
[3400-4DBF] CJK Unified Ideographs Extension A
-
+
[4E00-9FAF] CJK Unified Ideographs
-
+
[A000-A48F] Yi Syllables
-
+
[A490-A4CF] Yi Radicals
-
+
[AC00-D7AF] Hangul Syllables
-
+
[D800-DBFF] High Surrogates
-
+
[DC00-DFFF] Low Surrogate Area
-
+
[E000-F8FF] Private Use Area
@@ -4731,43 +4752,43 @@ You can changes these settings later in the Options Dialog of QCad.
[F900-FAFF] CJK Compatibility Ideographs
-
+
[FB00-FB4F] Alphabetic Presentation Forms
-
+
[FB50-FDFF] Arabic Presentation Forms-A
-
+
[FE00-FE0F] Variation Selectors
-
+
[FE20-FE2F] Combining Half Marks
-
+
[FE30-FE4F] CJK Compatibility Forms
-
+
[FE50-FE6F] Small Form Variants
-
+
[FE70-FEFF] Arabic Presentation Forms-B
-
+
[FF00-FFEF] Halfwidth and Fullwidth Forms
-
+
[FFF0-FFFF] Specials
-
+
[10300-1032F] Old Italic
@@ -4779,7 +4800,7 @@ You can changes these settings later in the Options Dialog of QCad.
[10400-1044F] Deseret
-
+
[1D000-1D0FF] Byzantine Musical Symbols
@@ -4795,11 +4816,11 @@ You can changes these settings later in the Options Dialog of QCad.
[20000-2A6DF] CJK Unified Ideographs Extension B
-
+
[2F800-2FA1F] CJK Compatibility Ideographs Supplement
-
+
[E0000-E007F] Tags
@@ -4807,11 +4828,11 @@ You can changes these settings later in the Options Dialog of QCad.
[F0000-FFFFD] Supplementary Private Use Area-A
-
+
[100000-10FFFD] Supplementary Private Use Area-B
-
+
&Height:
@@ -4843,11 +4864,11 @@ You can changes these settings later in the Options Dialog of QCad.
Registered (®)
-
+
Yen (¥)
-
+
@@ -4886,7 +4907,7 @@ You can changes these settings later in the Options Dialog of QCad.
again Still No Text supplied.
-
+
@@ -5492,7 +5513,7 @@ You can changes these settings later in the Options Dialog of QCad.
...
-
+
@@ -5526,7 +5547,7 @@ You can changes these settings later in the Options Dialog of QCad.
Polyline Options
-
+
Line
@@ -5534,11 +5555,11 @@ You can changes these settings later in the Options Dialog of QCad.
Tangential
-
+
Tan Radius
-
+
Angle
@@ -5827,12 +5848,12 @@ You can changes these settings later in the Options Dialog of QCad.
Αφαίρεση Στρώματος
- Layer "%1" and all entities on it will be removed.
- Το Στρώμα "%1" και όλα τα στοιχεία σε αυτό θα αφαιρεθούν.
+ Layer "%1" and all entities on it will be removed.
+ Το Στρώμα "%1" και όλα τα στοιχεία σε αυτό θα αφαιρεθούν.
- Layer "%1" can never be removed.
- Το Στρώμα "%1" δεν μπορεί ποτέ να αφαιρεθεί.
+ Layer "%1" can never be removed.
+ Το Στρώμα "%1" δεν μπορεί ποτέ να αφαιρεθεί.
Layer Dialog
@@ -5843,16 +5864,16 @@ You can changes these settings later in the Options Dialog of QCad.
Αφαίρεση Μπλόκ
- Block "%1" and all its entities will be removed.
- Το Μπλόκ "%1" και όλα τα στοιχεία σε αυτό θα αφαιρεθούν.
+ Block "%1" and all its entities will be removed.
+ Το Μπλόκ "%1" και όλα τα στοιχεία σε αυτό θα αφαιρεθούν.
Layer Properties
Ιδιότητες στρώματος
- Layer with a name "%1" already exists. Please specify a different name.
- Στρώμα με όνομα "%1" υπάρχει ίδη. Παρακαλώ δώστε διαφορετικό όνομα.
+ Layer with a name "%1" already exists. Please specify a different name.
+ Στρώμα με όνομα "%1" υπάρχει ίδη. Παρακαλώ δώστε διαφορετικό όνομα.
@@ -5953,83 +5974,83 @@ Do you want to replace it?
Inch
-
+
Foot
-
+
Mile
-
+
Millimeter
-
+
Centimeter
-
+
Meter
-
+
Kilometer
-
+
Microinch
-
+
Mil
-
+
Yard
-
+
Angstrom
-
+
Nanometer
-
+
Micron
-
+
Decimeter
-
+
Decameter
-
+
Hectometer
-
+
Gigameter
-
+
Astro
-
+
Lightyear
-
+
Parsec
-
+
Export Image
@@ -6041,12 +6062,16 @@ Do you want to replace it?
Loading Library Paths..
- Φόρτωση διαδρομών βιβλιοθήκης..
+ Φόρτωση διαδρομών βιβλιοθήκης..
Loading File %1..
Φόρτωση Αρχείου %1..
+
+ Loading...
+
+
RS_ActionBlocksAdd
@@ -6193,8 +6218,8 @@ Do you want to replace it?
&Εισαγωγή Μπλόκ
-
-
+
+
@@ -6874,8 +6899,8 @@ Do you want to replace it?
Εισαγωγή Εικόνας (Bitmap)
-
-
+
+
@@ -7198,8 +7223,8 @@ Do you want to replace it?
Καθορισμός κέντρου
-
-
+
+
Specify a corner
@@ -7491,11 +7516,11 @@ Do you want to replace it?
Draw polylines
-
+
Undo disallowed due a fatal bug somewhere. Sorry.
-
+
@@ -7669,7 +7694,7 @@ Do you want to replace it?
&New...
-
+
@@ -8044,16 +8069,16 @@ Do you want to replace it?
Εισαγωγή γωνίας:
-
-
+
+
Enter factor:
Εισαγωγή συντελεστή:
- Cannot open file '%1'
- Αδυναμία ανοίγματος αρχείου '%1'
+ Cannot open file '%1'
+ Αδυναμία ανοίγματος αρχείου '%1'
@@ -8177,11 +8202,11 @@ Do you want to replace it?
&Divide
-
+
Entity must be a line, arc, circle or ellipse.
-
+
@@ -8231,11 +8256,11 @@ Do you want to replace it?
Parent of second entity is not a polyline
-
+
Parent of second entity is NULL
-
+
One of the chosen entities is NULL
@@ -8243,11 +8268,11 @@ Do you want to replace it?
Parent of first entity is not a polyline
-
+
Parent of first entity is NULL
-
+
First entity is NULL
@@ -8684,11 +8709,11 @@ Do you want to replace it?
&Add node
-
+
- Add polyline's node
-
+ Add polyline's node
+
No Entity found.
@@ -8696,23 +8721,23 @@ Do you want to replace it?
Entity must be a polyline.
-
+
Adding point is invalid.
-
+
Adding point is not on entity.
-
+
Specify polyline to add nodes
-
+
- Specify adding node's point
-
+ Specify adding node's point
+
@@ -8723,11 +8748,11 @@ Do you want to replace it?
A&ppend node
-
+
- Append polyline's node
-
+ Append polyline's node
+
No Entity found.
@@ -8735,15 +8760,15 @@ Do you want to replace it?
Entity must be a polyline.
-
+
Click somewhere near the beginning or end of existing polyline.
-
+
Specify the polyline somewhere near the beginning or end point
-
+
Specify next point or [%1]
@@ -8770,11 +8795,11 @@ Do you want to replace it?
&Delete node
-
+
- Delete polyline's node
-
+ Delete polyline's node
+
No Entity found.
@@ -8782,23 +8807,23 @@ Do you want to replace it?
Entity must be a polyline.
-
+
Adding point is invalid.
-
+
Adding point is not on entity.
-
+
Specify polyline to delete node
-
+
- Specify deleting node's point
-
+ Specify deleting node's point
+
@@ -8813,7 +8838,7 @@ Do you want to replace it?
Delete &between two nodes
-
+
Delete between two nodes
@@ -8825,42 +8850,42 @@ Do you want to replace it?
Entity must be a polyline.
-
+
Deletinging point is invalid.
-
+
Deleting point is not on entity.
-
+
Deleteinging point is not on entity.
-
+
Specify polyline to delete between two nodes
-
+
Specify first node
-
+
Specify second node
-
+
RS_ActionPolylineEquidistant
Create &Equidistant Polylines
-
+
Create Equidistant Polylines
-
+
No Entity found.
@@ -8868,11 +8893,11 @@ Do you want to replace it?
Entity must be a polyline.
-
+
Choose the original polyline
-
+
Cancel
@@ -8883,11 +8908,11 @@ Do you want to replace it?
RS_ActionPolylineSegment
Create Polyline from Existing &Segments
-
+
Create Polyline from Existing Segments
-
+
No Entity found.
@@ -8895,11 +8920,11 @@ Do you want to replace it?
Entity must be a line or arc.
-
+
Choose one of the segments on the original polyline
-
+
Cancel
@@ -8918,11 +8943,11 @@ Do you want to replace it?
&Trim segments
-
+
- Trim polyline's segments
-
+ Trim polyline's segments
+
No Entity found.
@@ -8930,27 +8955,27 @@ Do you want to replace it?
Entity must be a polyline.
-
+
Specifying point is invalid.
-
+
No Segment found on entity.
-
+
Specify polyline to trim
-
+
Specify first segment
-
+
Specify second segment
-
+
@@ -8996,7 +9021,7 @@ Do you want to replace it?
Ctrl+K
-
+
@@ -9372,7 +9397,7 @@ Do you want to replace it?
u
undo
-
+
redo
@@ -9516,12 +9541,12 @@ Do you want to replace it?
offset
-
+
o
offset
-
+
parallel
@@ -9697,7 +9722,7 @@ Do you want to replace it?
zw
zoom - window
-
+
za
@@ -9730,7 +9755,7 @@ Do you want to replace it?
rp
regular polygon
-
+
c2
@@ -9860,17 +9885,17 @@ Do you want to replace it?
th*
layers - defreeze all
-
+
tn
Deselect all
-
+
ch
modify - bevel (chamfer)
-
+
mt
@@ -9880,66 +9905,66 @@ Do you want to replace it?
xt
modify - trim (extend)
-
+
rm
modify - trim
-
+
mv
modify - move
-
+
mi
modify - mirror
-
+
ro
modify - rotate
-
+
sz
modify - scale
-
+
ss
modify - stretch
-
+
er
modify - delete (erase)
-
+
oo
modify - undo (oops)
-
+
uu
modify - redo
-
+
xp
modify - explode
-
+
ex
modify - explode
-
+
dimregen
-
+
po
@@ -9951,11 +9976,11 @@ Do you want to replace it?
l
-
+
a
-
+
ci
@@ -9982,11 +10007,11 @@ Do you want to replace it?
zv
zoom - previous
-
+
r
-
+
polyline
@@ -10000,7 +10025,7 @@ Do you want to replace it?
tm
modify - multi trim (extend)
-
+
da
@@ -10024,55 +10049,55 @@ Do you want to replace it?
tm
-
+
xt
-
+
rm
-
+
mv
-
+
ch
-
+
mi
-
+
ro
-
+
sz
-
+
ss
-
+
er
-
+
oo
-
+
uu
-
+
xp
-
+
os
@@ -10092,7 +10117,7 @@ Do you want to replace it?
sn
-
+
sm
@@ -10104,24 +10129,24 @@ Do you want to replace it?
tn
-
+
kill
-
+
k
-
+
back
-
+
b
back
-
+
diff --git a/ts/librecad_en.ts b/ts/librecad_en.ts
index 83373b3681..7d23606309 100644
--- a/ts/librecad_en.ts
+++ b/ts/librecad_en.ts
@@ -227,10 +227,6 @@ Please check the permissions.
Modules: %1
-
- Date: %1
-
-
&Window
@@ -294,6 +290,26 @@ Auto-save disabled.
Import
+
+ &Toolbars
+
+
+
+ Compiled on: %1
+
+
+
+ Program Icons Supplied by
+
+
+
+ Splash and Logo supplied by
+
+
+
+ Main Website :
+
+
QC_MDIWindow
@@ -4436,11 +4452,11 @@ Do you want to replace it?
- Loading Library Paths..
+ Loading File %1..
- Loading File %1..
+ Loading...
diff --git a/ts/librecad_en_au.ts b/ts/librecad_en_au.ts
index c2eb7169f4..4280d9cca9 100644
--- a/ts/librecad_en_au.ts
+++ b/ts/librecad_en_au.ts
@@ -1,230 +1,236 @@
+
QC_ApplicationWindow
-
+
&Plugins
&Plugins
-
- Running script '%1'
- Running script '%1'
+
+ Running script '%1'
+ Running script '%1'
-
- Inserting block '%1'
- Inserting block '%1'
+
+ Inserting block '%1'
+ Inserting block '%1'
-
+
&File
&File
-
+
Import
Import
-
+
&Edit
&Edit
-
+
&View
&View
-
+
+ &Toolbars
+
+
+
+
Focus on &Command Line
Focus on &Command Line
-
+
CTRL+M
CTRL+M
-
+
&Select
&Select
-
+
&Draw
&Draw
-
+
&Point
&Point
-
+
&Line
&Line
-
+
&Arc
&Arc
-
+
&Circle
&Circle
-
+
&Ellipse
&Ellipse
-
+
&Spline
&Spline
-
+
&Polyline
&Polyline
-
-
+
+
&Dimension
&Dimension
-
+
&Modify
&Modify
-
+
&Snap
&Snap
-
+
&Info
&Info
-
+
&Layer
&Layer
-
+
&Block
&Block
-
+
&Scripts
&Scripts
-
+
&CAM
&CAM
-
+
About
About
-
+
&Manual
&Manual
-
+
Insert Image
Insert Image
-
+
&Window
&Window
-
+
&Help
&Help
-
+
De&bugging
De&bugging
-
+
Layer List
Layer List
-
+
Block List
Block List
-
+
Library Browser
Library Browser
-
+
Command line
Command line
-
+
&Cascade
&Cascade
-
+
&Tile
&Tile
-
+
Tile &Horizontally
Tile &Horizontally
-
+
Creating new file...
Creating new file...
-
- Block '%1'
- Block '%1'
+
+ Block '%1'
+ Block '%1'
-
+
unnamed document %1
unnamed document %1
-
+
New Drawing created.
New Drawing created.
-
+
Opening recent file...
Opening recent file...
-
+
Cannot open the file
%1
Please check the permissions.
@@ -233,29 +239,29 @@ Please check the permissions.
Please check the permissions.
-
+
Loaded document:
Loaded document:
-
+
Opening aborted
Opening aborted
-
+
Saving drawing...
Saving drawing...
-
-
+
+
Saved drawing: %1
Saved drawing: %1
-
-
+
+
Cannot save the file
%1
Please check the permissions.
@@ -264,22 +270,22 @@ Please check the permissions.
Please check the permissions.
-
+
Saving drawing under new filename...
Saving drawing under new filename...
-
+
Auto-saving drawing...
Auto-saving drawing...
-
+
Auto-saved drawing
Auto-saved drawing
-
+
Cannot auto-save the file
%1
Please check the permissions.
@@ -290,89 +296,108 @@ Please check the permissions.
Auto-save disabled.
-
+
Exporting drawing...
Exporting drawing...
-
+
Exported: %1
Exported: %1
-
+
Exporting...
Exporting...
-
+
Export complete
Export complete
-
+
Export failed!
Export failed!
-
+
Printing...
Printing...
-
+
Printing complete
Printing complete
-
+
Print preview for %1
Print preview for %1
-
+
Exiting application...
Exiting application...
-
+
None
None
-
+
About...
About...
-
+
Version: %1 %2
Version: %1 %2
-
+
SVN Revision: %1
SVN Revision: %1
-
+
+ Compiled on: %1
+
+
+
+
+ Program Icons Supplied by
+
+
+
+
+ Splash and Logo supplied by
+
+
+
Date: %1
- Date: %1
+ Date: %1
-
+
Modules: %1
Modules: %1
-
+
+ Main Website :
+
+
+
+
Help
Help
-
- Bugger, I couldn't find the helpfiles on the filesystem.
- 'Strewth, I couldn't find the helpfiles on the filesystem.
+
+ Bugger, I couldn't find the helpfiles on the filesystem.
+ 'Strewth, I couldn't find the helpfiles on the filesystem.
@@ -398,123 +423,123 @@ Auto-save disabled.
QG_ActionFactory
-
+
&Export...
&Export...
-
+
&Close
&Close
-
+
&Print...
&Print...
-
+
&Quit
&Quit
-
-
+
+
&Grid
&Grid
-
+
CTRL-G
CTRL-G
-
+
&Draft
&Draft
-
+
&Statusbar
&Statusbar
-
+
&back
&back
-
+
&Free
&Free
-
+
&Endpoints
&Endpoints
-
+
&On Entity
&On Entity
-
+
&Center
&Center
-
+
&Middle
&Middle
-
+
&Distance from Endpoint
&Distance from Endpoint
-
+
&Intersection
&Intersection
-
+
Restrict &Nothing
Restrict &Nothing
-
+
Restrict &Orthogonally
Restrict &Orthogonally
-
+
Restrict &Horizontally
Restrict &Horizontally
-
+
Restrict&Vertically
Restrict&Vertically
-
+
&Preferences
&Preferences
-
+
&Application Preferences
&Application Preferences
-
+
Open IDE
Open IDE
-
+
Run Script..
Run Script..
@@ -617,96 +642,96 @@ Auto-save disabled.
- Could not name block. A block named "%1" already exists.
- Could not name block. A block named "%1" already exists.
+ Could not name block. A block named "%1" already exists.
+ Could not name block. A block named "%1" already exists.
QG_BlockWidget
-
+
Show all blocks
Show all blocks
-
+
Hide all blocks
Hide all blocks
-
+
Add a block
Add a block
-
+
Remove the active block
Remove the active block
-
+
Rename the active block
Rename the active block
-
+
Edit the active block
in a separate window
Edit the active block
in a separate window
-
+
Insert the active block
Insert the active block
-
+
Block Menu
Block Menu
-
+
&Defreeze all Blocks
&Defreeze all Blocks
-
+
&Freeze all Blocks
&Freeze all Blocks
-
+
&Add Block
&Add Block
-
+
&Remove Block
&Remove Block
-
+
&Rename Block
&Rename Block
-
+
&Edit Block
&Edit Block
-
+
&Insert Block
&Insert Block
-
+
&Toggle Visibility
&Toggle Visibility
-
+
&Create New Block
&Create New Block
@@ -1001,13 +1026,13 @@ in a separate window
- Show menu "Lines"
- Show menu "Lines"
+ Show menu "Lines"
+ Show menu "Lines"
- Show menu "Arcs"
- Show menu "Arcs"
+ Show menu "Arcs"
+ Show menu "Arcs"
@@ -1021,13 +1046,13 @@ in a separate window
- Show menu "Ellipses"
- Show menu "Ellipses"
+ Show menu "Ellipses"
+ Show menu "Ellipses"
- Show menu "Circles"
- Show menu "Circles"
+ Show menu "Circles"
+ Show menu "Circles"
@@ -1036,8 +1061,8 @@ in a separate window
- Show menu "Dimensions"
- Show menu "Dimensions"
+ Show menu "Dimensions"
+ Show menu "Dimensions"
@@ -1051,13 +1076,13 @@ in a separate window
- Show menu "Edit"
- Show menu "Edit"
+ Show menu "Edit"
+ Show menu "Edit"
- Show menu "Measure"
- Show menu "Measure"
+ Show menu "Measure"
+ Show menu "Measure"
@@ -1066,8 +1091,8 @@ in a separate window
- Show menu "Select"
- Show menu "Select"
+ Show menu "Select"
+ Show menu "Select"
@@ -2011,12 +2036,12 @@ in a separate window
- <font size="+1"><b>Welcome to QCad</b>
+ <font size="+1"><b>Welcome to QCad</b>
</font>
<br>
Please choose the unit you want to use for new drawings and your preferred language.<br>
You can changes these settings later in the Options Dialog of QCad.
- <font size="+1"><b>Welcome to QCad</b>
+ <font size="+1"><b>Welcome to QCad</b>
</font>
<br>
Please choose the unit you want to use for new drawings and your preferred language.<br>
@@ -2680,8 +2705,8 @@ You can changes these settings later in the Options Dialogue of QCad.
- Surveyor's units
- Surveyor's units
+ Surveyor's units
+ Surveyor's units
@@ -2690,8 +2715,8 @@ You can changes these settings later in the Options Dialogue of QCad.
- For the length formats 'Engineering' and 'Architectural', the unit must be set to Inch.
- For the length formats 'Engineering' and 'Architectural', the unit must be set to Inch.
+ For the length formats 'Engineering' and 'Architectural', the unit must be set to Inch.
+ For the length formats 'Engineering' and 'Architectural', the unit must be set to Inch.
@@ -5292,10 +5317,10 @@ You can changes these settings later in the Options Dialogue of QCad.
QMessageBox
-
-
-
-
+
+
+
+
Warning
Warning
@@ -5307,8 +5332,8 @@ You can changes these settings later in the Options Dialogue of QCad.
- Layer with a name "%1" already exists. Please specify a different name.
- Layer with a name "%1" already exists. Please specify a different name.
+ Layer with a name "%1" already exists. Please specify a different name.
+ Layer with a name "%1" already exists. Please specify a different name.
@@ -5318,13 +5343,13 @@ You can changes these settings later in the Options Dialogue of QCad.
- Layer "%1" and all entities on it will be removed.
- Layer "%1" and all entities on it will be removed.
+ Layer "%1" and all entities on it will be removed.
+ Layer "%1" and all entities on it will be removed.
- Layer "%1" can never be removed.
- Layer "%1" can never be removed.
+ Layer "%1" can never be removed.
+ Layer "%1" can never be removed.
@@ -5338,8 +5363,8 @@ You can changes these settings later in the Options Dialogue of QCad.
- Block "%1" and all its entities will be removed.
- Block "%1" and all its entities will be removed.
+ Block "%1" and all its entities will be removed.
+ Block "%1" and all its entities will be removed.
@@ -5470,17 +5495,21 @@ You can changes these settings later in the Options Dialogue of QCad.Parsec
-
+
Loading..
Loading..
-
+
+ Loading...
+
+
+
Loading Library Paths..
- Loading Library Paths..
+ Loading Library Paths..
-
+
Loading File %1..
Loading File %1..
@@ -5550,35 +5579,35 @@ You can changes these settings later in the Options Dialogue of QCad.X Pixel Map
-
-
+
+
Save Drawing As
Save Drawing As
-
+
%1 already exists.
Do you want to replace it?
%1 already exists.
Do you want to replace it?
-
+
Drawing Exchange %1
Drawing Exchange %1
-
+
QCad 1.x file %1
QCad 1.x file %1
-
+
Font %1
Font %1
-
+
Open Drawing
Open Drawing
@@ -6965,22 +6994,22 @@ Do you want to replace it?
RS_ActionEditCopy
-
+
&Copy
&Copy
-
+
Cu&t
Cu&t
-
+
Specify reference point
Specify reference point
-
+
Cancel
Cancel
@@ -6988,17 +7017,17 @@ Do you want to replace it?
RS_ActionEditPaste
-
+
&Paste
&Paste
-
+
Set reference point
Set reference point
-
+
Cancel
Cancel
@@ -7006,12 +7035,12 @@ Do you want to replace it?
RS_ActionEditUndo
-
+
&Undo
&Undo
-
+
&Redo
&Redo
@@ -7019,7 +7048,7 @@ Do you want to replace it?
RS_ActionFileNew
-
+
&New...
&New...
@@ -7027,7 +7056,7 @@ Do you want to replace it?
RS_ActionFileOpen
-
+
&Open...
&Open...
@@ -7035,7 +7064,7 @@ Do you want to replace it?
RS_ActionFileSave
-
+
&Save
&Save
@@ -7043,7 +7072,7 @@ Do you want to replace it?
RS_ActionFileSaveAs
-
+
Save &as...
Save &as...
@@ -7304,8 +7333,8 @@ Do you want to replace it?
- Cannot open file '%1'
- Cannot open file '%1'
+ Cannot open file '%1'
+ Cannot open file '%1'
@@ -7893,8 +7922,8 @@ Do you want to replace it?
- Add polyline's node
- Add polyline's node
+ Add polyline's node
+ Add polyline's node
@@ -7929,8 +7958,8 @@ Do you want to replace it?
- Specify adding node's point
- Specify adding node's point
+ Specify adding node's point
+ Specify adding node's point
@@ -7947,8 +7976,8 @@ Do you want to replace it?
- Append polyline's node
- Append polyline's node
+ Append polyline's node
+ Append polyline's node
@@ -8001,8 +8030,8 @@ Do you want to replace it?
- Delete polyline's node
- Delete polyline's node
+ Delete polyline's node
+ Delete polyline's node
@@ -8037,8 +8066,8 @@ Do you want to replace it?
- Specify deleting node's point
- Specify deleting node's point
+ Specify deleting node's point
+ Specify deleting node's point
@@ -8188,8 +8217,8 @@ Do you want to replace it?
- Trim polyline's segments
- Trim polyline's segments
+ Trim polyline's segments
+ Trim polyline's segments
@@ -8245,7 +8274,7 @@ Do you want to replace it?
RS_ActionPrintPreview
-
+
Print Pre&view
Print Pre&view
@@ -8434,7 +8463,7 @@ Do you want to replace it?
RS_ActionZoomAuto
-
+
&Auto Zoom
&Auto Zoom
@@ -8442,12 +8471,12 @@ Do you want to replace it?
RS_ActionZoomIn
-
+
Zoom &In
Zoom &In
-
+
Zoom &Out
Zoom &Out
@@ -8455,7 +8484,7 @@ Do you want to replace it?
RS_ActionZoomPan
-
+
&Pan Zoom
&Pan Zoom
@@ -8463,7 +8492,7 @@ Do you want to replace it?
RS_ActionZoomPrevious
-
+
&Previous View
&Previous View
@@ -8471,7 +8500,7 @@ Do you want to replace it?
RS_ActionZoomRedraw
-
+
&Redraw
&Redraw
@@ -8479,27 +8508,27 @@ Do you want to replace it?
RS_ActionZoomWindow
-
+
&Window Zoom
&Window Zoom
-
+
Specify first edge
Specify first edge
-
+
Cancel
Cancel
-
+
Specify second edge
Specify second edge
-
+
Back
Back
diff --git a/ts/librecad_es.ts b/ts/librecad_es.ts
index 8a77dd26a7..fbead40c74 100644
--- a/ts/librecad_es.ts
+++ b/ts/librecad_es.ts
@@ -1,7 +1,8 @@
+
-
+
Loading..
Cargando...
@@ -294,8 +295,8 @@ Date: %1
Controles de Simulación
- Block '%1'
- Bloque '%1'
+ Block '%1'
+ Bloque '%1'
Cannot open the file
@@ -323,7 +324,7 @@ Compruebe los permisos.
Date: %1
- Fecha: %1
+ Fecha: %1
Modules: %1
@@ -352,12 +353,12 @@ Ahora puede guardar su trabajo.
Curva
- Running script '%1'
- Corriendo script '%1'
+ Running script '%1'
+ Corriendo script '%1'
- Inserting block '%1'
- Insertando bloque '%1'
+ Inserting block '%1'
+ Insertando bloque '%1'
&Polyline
@@ -398,16 +399,36 @@ Guardado automático desactivado.
Ayuda
- Bugger, I couldn't find the helpfiles on the filesystem.
+ Bugger, I couldn't find the helpfiles on the filesystem.
Se encontraron problemas al buscar archivos de ayuda en el sistema.
&Plugins
-
+
Import
-
+
+
+
+ &Toolbars
+
+
+
+ Compiled on: %1
+
+
+
+ Program Icons Supplied by
+
+
+
+ Splash and Logo supplied by
+
+
+
+ Main Website :
+
@@ -1924,7 +1945,7 @@ Guardado automático desactivado.
&back
-
+
@@ -1995,8 +2016,8 @@ Guardado automático desactivado.
Renombrando Bloque
- Could not name block. A block named "%1" already exists.
- No se pudo nombrar el bloque. El bloque "%1" ya existe.
+ Could not name block. A block named "%1" already exists.
+ No se pudo nombrar el bloque. El bloque "%1" ya existe.
&OK
@@ -2320,27 +2341,27 @@ en otra ventana
Principal
- Show menu "Lines"
+ Show menu "Lines"
Dibujar Líneas
- Show menu "Arcs"
+ Show menu "Arcs"
Dibujar Arcos
- Show menu "Circles"
+ Show menu "Circles"
Dibujar Círculos
- Show menu "Points"
- "Puntos"
+ Show menu "Points"
+ "Puntos"
- Show menu "Measure"
+ Show menu "Measure"
Medir
- Show menu "Ellipses"
+ Show menu "Ellipses"
Dibujar Elipses
@@ -2348,11 +2369,11 @@ en otra ventana
Sombrear/Rellenar
- Show menu "Edit"
+ Show menu "Edit"
Edición de objetos
- Show menu "Dimensions"
+ Show menu "Dimensions"
Acotar
@@ -2360,7 +2381,7 @@ en otra ventana
Insertar Texto
- Show menu "Select"
+ Show menu "Select"
Herramientas de Selección
@@ -3147,12 +3168,12 @@ en otra ventana
Bienvenido
- <font size="+1"><b>Welcome to QCad</b>
+ <font size="+1"><b>Welcome to QCad</b>
</font>
<br>
Please choose the unit you want to use for new drawings and your preferred language.<br>
You can changes these settings later in the Options Dialog of QCad.
- <font size="+1"><b>Bienvenidos a QCad</b>
+ <font size="+1"><b>Bienvenidos a QCad</b>
</font>
<br>
Por favor seleccione el idioma y unidad a utilizar en sus nuevos dibujos.<br>(new line)
@@ -3521,7 +3542,7 @@ Puede cambiar estos parámetros posteriormente en Edición/Preferencias de Libre
Gradianes
- Surveyor's units
+ Surveyor's units
Unidades de medición
@@ -3529,8 +3550,8 @@ Puede cambiar estos parámetros posteriormente en Edición/Preferencias de Libre
Opciones
- For the length formats 'Engineering' and 'Architectural', the unit must be set to Inch.
- Para mediciones "Ingenieriles" y "Arquitectónicas", la unidad debe ser la Pulgada.
+ For the length formats 'Engineering' and 'Architectural', the unit must be set to Inch.
+ Para mediciones "Ingenieriles" y "Arquitectónicas", la unidad debe ser la Pulgada.
Extension line extension:
@@ -5667,7 +5688,7 @@ Pre&cisión:
QG_TrimAmountOptions
Trim Amount Options
- Opciones "cortar tramo"
+ Opciones "cortar tramo"
Distance. Negative values for trimming, positive values for extending.
@@ -5823,12 +5844,12 @@ Pre&cisión:
Eliminar Capa
- Layer "%1" and all entities on it will be removed.
- La capa "%1" y todos sus objetos serán eliminados.
+ Layer "%1" and all entities on it will be removed.
+ La capa "%1" y todos sus objetos serán eliminados.
- Layer "%1" can never be removed.
- La capa "%1" no podrá ser eliminada.
+ Layer "%1" can never be removed.
+ La capa "%1" no podrá ser eliminada.
Layer Dialog
@@ -5839,16 +5860,16 @@ Pre&cisión:
Eliminar Bloque
- Block "%1" and all its entities will be removed.
- El bloque "%1" y todos sus objetos serán eliminados.
+ Block "%1" and all its entities will be removed.
+ El bloque "%1" y todos sus objetos serán eliminados.
Layer Properties
Propiedades de capa
- Layer with a name "%1" already exists. Please specify a different name.
- Ya existe una capa "%1". Por favor especifique otro nombre.
+ Layer with a name "%1" already exists. Please specify a different name.
+ Ya existe una capa "%1". Por favor especifique otro nombre.
@@ -6037,12 +6058,16 @@ Do you want to replace it?
Loading Library Paths..
- Buscando bibliotecas..
+ Buscando bibliotecas..
Loading File %1..
Cargando Archivo %1..
+
+ Loading...
+
+
RS_ActionBlocksAdd
@@ -6189,8 +6214,8 @@ Do you want to replace it?
Espacio entre filas:
-
-
+
+
@@ -6871,8 +6896,8 @@ Do you want to replace it?
Factor:
-
-
+
+
@@ -7207,8 +7232,8 @@ Do you want to replace it?
Comando no válido
-
-
+
+
@@ -8057,12 +8082,12 @@ Do you want to replace it?
Factor:
-
-
+
+
- Cannot open file '%1'
- No se puede abrir el archivo '%1'
+ Cannot open file '%1'
+ No se puede abrir el archivo '%1'
@@ -8704,7 +8729,7 @@ Do you want to replace it?
&Añadir punto
- Add polyline's node
+ Add polyline's node
Añadir punto en Polilínea
@@ -8728,7 +8753,7 @@ Do you want to replace it?
seleccionar la Polilínea para añadir puntos.
- Specify adding node's point
+ Specify adding node's point
Especifique los puntos a añadir
@@ -8747,7 +8772,7 @@ Do you want to replace it?
Añadir punto
- Append polyline's node
+ Append polyline's node
Añadir punto a Polilínea
@@ -8790,7 +8815,7 @@ Do you want to replace it?
Borrar punto
- Delete polyline's node
+ Delete polyline's node
Borrar punto en Polilínea
@@ -8814,7 +8839,7 @@ Do you want to replace it?
Especifique la Polilínea para borrar punto
- Specify deleting node's point
+ Specify deleting node's point
Especifique punto a borrar
@@ -8938,7 +8963,7 @@ Do you want to replace it?
Cortar segmentos
- Trim polyline's segments
+ Trim polyline's segments
Cortar segmentos en Polilínea
@@ -9965,7 +9990,7 @@ Do you want to replace it?
dimregen
-
+
po
@@ -10012,7 +10037,7 @@ Do you want to replace it?
r
-
+
polyline
@@ -10134,20 +10159,20 @@ Do you want to replace it?
kill
-
+
k
-
+
back
-
+
b
back
-
+
diff --git a/ts/librecad_es_ar.ts b/ts/librecad_es_ar.ts
index 616e669d9c..59df77fee9 100644
--- a/ts/librecad_es_ar.ts
+++ b/ts/librecad_es_ar.ts
@@ -324,7 +324,7 @@ Compruebe los permisos.
Date: %1
- Fecha: %1
+ Fecha: %1
Modules: %1
@@ -407,6 +407,26 @@ Auto-save disabled.
Import
+
+ &Toolbars
+
+
+
+ Compiled on: %1
+
+
+
+ Program Icons Supplied by
+
+
+
+ Splash and Logo supplied by
+
+
+
+ Main Website :
+
+
QC_MDIWindow
@@ -6035,12 +6055,16 @@ Do you want to replace it?
Loading Library Paths..
- Buscando librerias
+ Buscando librerias
Loading File %1..
Cargando Archivo %1..
+
+ Loading...
+
+
RS_ActionBlocksAdd
diff --git a/ts/librecad_es_bo.ts b/ts/librecad_es_bo.ts
index 616e669d9c..59df77fee9 100644
--- a/ts/librecad_es_bo.ts
+++ b/ts/librecad_es_bo.ts
@@ -324,7 +324,7 @@ Compruebe los permisos.
Date: %1
- Fecha: %1
+ Fecha: %1
Modules: %1
@@ -407,6 +407,26 @@ Auto-save disabled.
Import
+
+ &Toolbars
+
+
+
+ Compiled on: %1
+
+
+
+ Program Icons Supplied by
+
+
+
+ Splash and Logo supplied by
+
+
+
+ Main Website :
+
+
QC_MDIWindow
@@ -6035,12 +6055,16 @@ Do you want to replace it?
Loading Library Paths..
- Buscando librerias
+ Buscando librerias
Loading File %1..
Cargando Archivo %1..
+
+ Loading...
+
+
RS_ActionBlocksAdd
diff --git a/ts/librecad_es_cl.ts b/ts/librecad_es_cl.ts
index 616e669d9c..59df77fee9 100644
--- a/ts/librecad_es_cl.ts
+++ b/ts/librecad_es_cl.ts
@@ -324,7 +324,7 @@ Compruebe los permisos.
Date: %1
- Fecha: %1
+ Fecha: %1
Modules: %1
@@ -407,6 +407,26 @@ Auto-save disabled.
Import
+
+ &Toolbars
+
+
+
+ Compiled on: %1
+
+
+
+ Program Icons Supplied by
+
+
+
+ Splash and Logo supplied by
+
+
+
+ Main Website :
+
+
QC_MDIWindow
@@ -6035,12 +6055,16 @@ Do you want to replace it?
Loading Library Paths..
- Buscando librerias
+ Buscando librerias
Loading File %1..
Cargando Archivo %1..
+
+ Loading...
+
+
RS_ActionBlocksAdd
diff --git a/ts/librecad_es_co.ts b/ts/librecad_es_co.ts
index 616e669d9c..59df77fee9 100644
--- a/ts/librecad_es_co.ts
+++ b/ts/librecad_es_co.ts
@@ -324,7 +324,7 @@ Compruebe los permisos.
Date: %1
- Fecha: %1
+ Fecha: %1
Modules: %1
@@ -407,6 +407,26 @@ Auto-save disabled.
Import
+
+ &Toolbars
+
+
+
+ Compiled on: %1
+
+
+
+ Program Icons Supplied by
+
+
+
+ Splash and Logo supplied by
+
+
+
+ Main Website :
+
+
QC_MDIWindow
@@ -6035,12 +6055,16 @@ Do you want to replace it?
Loading Library Paths..
- Buscando librerias
+ Buscando librerias
Loading File %1..
Cargando Archivo %1..
+
+ Loading...
+
+
RS_ActionBlocksAdd
diff --git a/ts/librecad_es_cr.ts b/ts/librecad_es_cr.ts
index 616e669d9c..59df77fee9 100644
--- a/ts/librecad_es_cr.ts
+++ b/ts/librecad_es_cr.ts
@@ -324,7 +324,7 @@ Compruebe los permisos.
Date: %1
- Fecha: %1
+ Fecha: %1
Modules: %1
@@ -407,6 +407,26 @@ Auto-save disabled.
Import
+
+ &Toolbars
+
+
+
+ Compiled on: %1
+
+
+
+ Program Icons Supplied by
+
+
+
+ Splash and Logo supplied by
+
+
+
+ Main Website :
+
+
QC_MDIWindow
@@ -6035,12 +6055,16 @@ Do you want to replace it?
Loading Library Paths..
- Buscando librerias
+ Buscando librerias
Loading File %1..
Cargando Archivo %1..
+
+ Loading...
+
+
RS_ActionBlocksAdd
diff --git a/ts/librecad_es_do.ts b/ts/librecad_es_do.ts
index 616e669d9c..59df77fee9 100644
--- a/ts/librecad_es_do.ts
+++ b/ts/librecad_es_do.ts
@@ -324,7 +324,7 @@ Compruebe los permisos.
Date: %1
- Fecha: %1
+ Fecha: %1
Modules: %1
@@ -407,6 +407,26 @@ Auto-save disabled.
Import
+
+ &Toolbars
+
+
+
+ Compiled on: %1
+
+
+
+ Program Icons Supplied by
+
+
+
+ Splash and Logo supplied by
+
+
+
+ Main Website :
+
+
QC_MDIWindow
@@ -6035,12 +6055,16 @@ Do you want to replace it?
Loading Library Paths..
- Buscando librerias
+ Buscando librerias
Loading File %1..
Cargando Archivo %1..
+
+ Loading...
+
+
RS_ActionBlocksAdd
diff --git a/ts/librecad_es_ec.ts b/ts/librecad_es_ec.ts
index 616e669d9c..59df77fee9 100644
--- a/ts/librecad_es_ec.ts
+++ b/ts/librecad_es_ec.ts
@@ -324,7 +324,7 @@ Compruebe los permisos.
Date: %1
- Fecha: %1
+ Fecha: %1
Modules: %1
@@ -407,6 +407,26 @@ Auto-save disabled.
Import
+
+ &Toolbars
+
+
+
+ Compiled on: %1
+
+
+
+ Program Icons Supplied by
+
+
+
+ Splash and Logo supplied by
+
+
+
+ Main Website :
+
+
QC_MDIWindow
@@ -6035,12 +6055,16 @@ Do you want to replace it?
Loading Library Paths..
- Buscando librerias
+ Buscando librerias
Loading File %1..
Cargando Archivo %1..
+
+ Loading...
+
+
RS_ActionBlocksAdd
diff --git a/ts/librecad_es_gt.ts b/ts/librecad_es_gt.ts
index 616e669d9c..59df77fee9 100644
--- a/ts/librecad_es_gt.ts
+++ b/ts/librecad_es_gt.ts
@@ -324,7 +324,7 @@ Compruebe los permisos.
Date: %1
- Fecha: %1
+ Fecha: %1
Modules: %1
@@ -407,6 +407,26 @@ Auto-save disabled.
Import
+
+ &Toolbars
+
+
+
+ Compiled on: %1
+
+
+
+ Program Icons Supplied by
+
+
+
+ Splash and Logo supplied by
+
+
+
+ Main Website :
+
+
QC_MDIWindow
@@ -6035,12 +6055,16 @@ Do you want to replace it?
Loading Library Paths..
- Buscando librerias
+ Buscando librerias
Loading File %1..
Cargando Archivo %1..
+
+ Loading...
+
+
RS_ActionBlocksAdd
diff --git a/ts/librecad_es_hn.ts b/ts/librecad_es_hn.ts
index 616e669d9c..59df77fee9 100644
--- a/ts/librecad_es_hn.ts
+++ b/ts/librecad_es_hn.ts
@@ -324,7 +324,7 @@ Compruebe los permisos.
Date: %1
- Fecha: %1
+ Fecha: %1
Modules: %1
@@ -407,6 +407,26 @@ Auto-save disabled.
Import
+
+ &Toolbars
+
+
+
+ Compiled on: %1
+
+
+
+ Program Icons Supplied by
+
+
+
+ Splash and Logo supplied by
+
+
+
+ Main Website :
+
+
QC_MDIWindow
@@ -6035,12 +6055,16 @@ Do you want to replace it?
Loading Library Paths..
- Buscando librerias
+ Buscando librerias
Loading File %1..
Cargando Archivo %1..
+
+ Loading...
+
+
RS_ActionBlocksAdd
diff --git a/ts/librecad_es_mx.ts b/ts/librecad_es_mx.ts
index 616e669d9c..59df77fee9 100644
--- a/ts/librecad_es_mx.ts
+++ b/ts/librecad_es_mx.ts
@@ -324,7 +324,7 @@ Compruebe los permisos.
Date: %1
- Fecha: %1
+ Fecha: %1
Modules: %1
@@ -407,6 +407,26 @@ Auto-save disabled.
Import
+
+ &Toolbars
+
+
+
+ Compiled on: %1
+
+
+
+ Program Icons Supplied by
+
+
+
+ Splash and Logo supplied by
+
+
+
+ Main Website :
+
+
QC_MDIWindow
@@ -6035,12 +6055,16 @@ Do you want to replace it?
Loading Library Paths..
- Buscando librerias
+ Buscando librerias
Loading File %1..
Cargando Archivo %1..
+
+ Loading...
+
+
RS_ActionBlocksAdd
diff --git a/ts/librecad_es_ni.ts b/ts/librecad_es_ni.ts
index 616e669d9c..59df77fee9 100644
--- a/ts/librecad_es_ni.ts
+++ b/ts/librecad_es_ni.ts
@@ -324,7 +324,7 @@ Compruebe los permisos.
Date: %1
- Fecha: %1
+ Fecha: %1
Modules: %1
@@ -407,6 +407,26 @@ Auto-save disabled.
Import
+
+ &Toolbars
+
+
+
+ Compiled on: %1
+
+
+
+ Program Icons Supplied by
+
+
+
+ Splash and Logo supplied by
+
+
+
+ Main Website :
+
+
QC_MDIWindow
@@ -6035,12 +6055,16 @@ Do you want to replace it?
Loading Library Paths..
- Buscando librerias
+ Buscando librerias
Loading File %1..
Cargando Archivo %1..
+
+ Loading...
+
+
RS_ActionBlocksAdd
diff --git a/ts/librecad_es_pa.ts b/ts/librecad_es_pa.ts
index 616e669d9c..59df77fee9 100644
--- a/ts/librecad_es_pa.ts
+++ b/ts/librecad_es_pa.ts
@@ -324,7 +324,7 @@ Compruebe los permisos.
Date: %1
- Fecha: %1
+ Fecha: %1
Modules: %1
@@ -407,6 +407,26 @@ Auto-save disabled.
Import
+
+ &Toolbars
+
+
+
+ Compiled on: %1
+
+
+
+ Program Icons Supplied by
+
+
+
+ Splash and Logo supplied by
+
+
+
+ Main Website :
+
+
QC_MDIWindow
@@ -6035,12 +6055,16 @@ Do you want to replace it?
Loading Library Paths..
- Buscando librerias
+ Buscando librerias
Loading File %1..
Cargando Archivo %1..
+
+ Loading...
+
+
RS_ActionBlocksAdd
diff --git a/ts/librecad_es_pe.ts b/ts/librecad_es_pe.ts
index 616e669d9c..59df77fee9 100644
--- a/ts/librecad_es_pe.ts
+++ b/ts/librecad_es_pe.ts
@@ -324,7 +324,7 @@ Compruebe los permisos.
Date: %1
- Fecha: %1
+ Fecha: %1
Modules: %1
@@ -407,6 +407,26 @@ Auto-save disabled.
Import
+
+ &Toolbars
+
+
+
+ Compiled on: %1
+
+
+
+ Program Icons Supplied by
+
+
+
+ Splash and Logo supplied by
+
+
+
+ Main Website :
+
+
QC_MDIWindow
@@ -6035,12 +6055,16 @@ Do you want to replace it?
Loading Library Paths..
- Buscando librerias
+ Buscando librerias
Loading File %1..
Cargando Archivo %1..
+
+ Loading...
+
+
RS_ActionBlocksAdd
diff --git a/ts/librecad_es_pr.ts b/ts/librecad_es_pr.ts
index 616e669d9c..59df77fee9 100644
--- a/ts/librecad_es_pr.ts
+++ b/ts/librecad_es_pr.ts
@@ -324,7 +324,7 @@ Compruebe los permisos.
Date: %1
- Fecha: %1
+ Fecha: %1
Modules: %1
@@ -407,6 +407,26 @@ Auto-save disabled.
Import
+
+ &Toolbars
+
+
+
+ Compiled on: %1
+
+
+
+ Program Icons Supplied by
+
+
+
+ Splash and Logo supplied by
+
+
+
+ Main Website :
+
+
QC_MDIWindow
@@ -6035,12 +6055,16 @@ Do you want to replace it?
Loading Library Paths..
- Buscando librerias
+ Buscando librerias
Loading File %1..
Cargando Archivo %1..
+
+ Loading...
+
+
RS_ActionBlocksAdd
diff --git a/ts/librecad_es_py.ts b/ts/librecad_es_py.ts
index 616e669d9c..59df77fee9 100644
--- a/ts/librecad_es_py.ts
+++ b/ts/librecad_es_py.ts
@@ -324,7 +324,7 @@ Compruebe los permisos.
Date: %1
- Fecha: %1
+ Fecha: %1
Modules: %1
@@ -407,6 +407,26 @@ Auto-save disabled.
Import
+
+ &Toolbars
+
+
+
+ Compiled on: %1
+
+
+
+ Program Icons Supplied by
+
+
+
+ Splash and Logo supplied by
+
+
+
+ Main Website :
+
+
QC_MDIWindow
@@ -6035,12 +6055,16 @@ Do you want to replace it?
Loading Library Paths..
- Buscando librerias
+ Buscando librerias
Loading File %1..
Cargando Archivo %1..
+
+ Loading...
+
+
RS_ActionBlocksAdd
diff --git a/ts/librecad_es_sv.ts b/ts/librecad_es_sv.ts
index 616e669d9c..59df77fee9 100644
--- a/ts/librecad_es_sv.ts
+++ b/ts/librecad_es_sv.ts
@@ -324,7 +324,7 @@ Compruebe los permisos.
Date: %1
- Fecha: %1
+ Fecha: %1
Modules: %1
@@ -407,6 +407,26 @@ Auto-save disabled.
Import
+
+ &Toolbars
+
+
+
+ Compiled on: %1
+
+
+
+ Program Icons Supplied by
+
+
+
+ Splash and Logo supplied by
+
+
+
+ Main Website :
+
+
QC_MDIWindow
@@ -6035,12 +6055,16 @@ Do you want to replace it?
Loading Library Paths..
- Buscando librerias
+ Buscando librerias
Loading File %1..
Cargando Archivo %1..
+
+ Loading...
+
+
RS_ActionBlocksAdd
diff --git a/ts/librecad_es_us.ts b/ts/librecad_es_us.ts
index 616e669d9c..59df77fee9 100644
--- a/ts/librecad_es_us.ts
+++ b/ts/librecad_es_us.ts
@@ -324,7 +324,7 @@ Compruebe los permisos.
Date: %1
- Fecha: %1
+ Fecha: %1
Modules: %1
@@ -407,6 +407,26 @@ Auto-save disabled.
Import
+
+ &Toolbars
+
+
+
+ Compiled on: %1
+
+
+
+ Program Icons Supplied by
+
+
+
+ Splash and Logo supplied by
+
+
+
+ Main Website :
+
+
QC_MDIWindow
@@ -6035,12 +6055,16 @@ Do you want to replace it?
Loading Library Paths..
- Buscando librerias
+ Buscando librerias
Loading File %1..
Cargando Archivo %1..
+
+ Loading...
+
+
RS_ActionBlocksAdd
diff --git a/ts/librecad_es_uy.ts b/ts/librecad_es_uy.ts
index 616e669d9c..59df77fee9 100644
--- a/ts/librecad_es_uy.ts
+++ b/ts/librecad_es_uy.ts
@@ -324,7 +324,7 @@ Compruebe los permisos.
Date: %1
- Fecha: %1
+ Fecha: %1
Modules: %1
@@ -407,6 +407,26 @@ Auto-save disabled.
Import
+
+ &Toolbars
+
+
+
+ Compiled on: %1
+
+
+
+ Program Icons Supplied by
+
+
+
+ Splash and Logo supplied by
+
+
+
+ Main Website :
+
+
QC_MDIWindow
@@ -6035,12 +6055,16 @@ Do you want to replace it?
Loading Library Paths..
- Buscando librerias
+ Buscando librerias
Loading File %1..
Cargando Archivo %1..
+
+ Loading...
+
+
RS_ActionBlocksAdd
diff --git a/ts/librecad_es_ve.ts b/ts/librecad_es_ve.ts
index 616e669d9c..59df77fee9 100644
--- a/ts/librecad_es_ve.ts
+++ b/ts/librecad_es_ve.ts
@@ -324,7 +324,7 @@ Compruebe los permisos.
Date: %1
- Fecha: %1
+ Fecha: %1
Modules: %1
@@ -407,6 +407,26 @@ Auto-save disabled.
Import
+
+ &Toolbars
+
+
+
+ Compiled on: %1
+
+
+
+ Program Icons Supplied by
+
+
+
+ Splash and Logo supplied by
+
+
+
+ Main Website :
+
+
QC_MDIWindow
@@ -6035,12 +6055,16 @@ Do you want to replace it?
Loading Library Paths..
- Buscando librerias
+ Buscando librerias
Loading File %1..
Cargando Archivo %1..
+
+ Loading...
+
+
RS_ActionBlocksAdd
diff --git a/ts/librecad_et.ts b/ts/librecad_et.ts
index 6da1edcd66..b3bc986fe1 100644
--- a/ts/librecad_et.ts
+++ b/ts/librecad_et.ts
@@ -1,7 +1,8 @@
+
-
+
Loading..
Laadimine..
@@ -218,7 +219,7 @@
Date: %1
- Kuupäev: %1
+ Kuupäev: %1
Library Browser
@@ -273,8 +274,8 @@
Käsurida
- Block '%1'
- Plokk '%1'
+ Block '%1'
+ Plokk '%1'
Cannot open the file
@@ -357,12 +358,12 @@ Salvesta nüüd oma töö.
&Kõver
- Running script '%1'
-
+ Running script '%1'
+
- Inserting block '%1'
-
+ Inserting block '%1'
+
&Polyline
@@ -370,46 +371,66 @@ Salvesta nüüd oma töö.
CTRL+M
-
+
Insert Image
-
+
Auto-saving drawing...
-
+
Auto-saved drawing
-
+
Cannot auto-save the file
%1
Please check the permissions.
Auto-save disabled.
-
+
SVN Revision: %1
-
+
Help
-
+
- Bugger, I couldn't find the helpfiles on the filesystem.
-
+ Bugger, I couldn't find the helpfiles on the filesystem.
+
&Plugins
-
+
Import
-
+
+
+
+ &Toolbars
+
+
+
+ Compiled on: %1
+
+
+
+ Program Icons Supplied by
+
+
+
+ Splash and Logo supplied by
+
+
+
+ Main Website :
+
@@ -952,15 +973,15 @@ Auto-save disabled.
CTRL-G
-
+
Restrict&Vertically
-
+
&back
-
+
@@ -982,7 +1003,7 @@ Auto-save disabled.
QG_ArcTangentialOptions
Tangential Arc Options
-
+
Radius:
@@ -1031,8 +1052,8 @@ Auto-save disabled.
Ploki nime muutmine
- Could not name block. A block named "%1" already exists.
- Ploki nime muutmine ei õnnestunud. Plokk nimega "%1" on juba olemas.
+ Could not name block. A block named "%1" already exists.
+ Ploki nime muutmine ei õnnestunud. Plokk nimega "%1" on juba olemas.
&OK
@@ -1150,7 +1171,7 @@ in a separate window
Arc tangential to base entity with radius
-
+
@@ -1196,7 +1217,7 @@ in a separate window
Diametric Dimension
-
+
Radial Dimension
@@ -1355,48 +1376,48 @@ in a separate window
Peamine
- Show menu "Lines"
- Menüü "Jooned" näitamine
+ Show menu "Lines"
+ Menüü "Jooned" näitamine
- Show menu "Arcs"
- Menüü "Kaared" näitamine
+ Show menu "Arcs"
+ Menüü "Kaared" näitamine
- Show menu "Circles"
- Menüü "Ringjooned" näitamine
+ Show menu "Circles"
+ Menüü "Ringjooned" näitamine
- Show menu "Points"
- Menüü "Punktid" näitamine
+ Show menu "Points"
+ Menüü "Punktid" näitamine
- Show menu "Measure"
- Menüü "Mõõtmine" näitamine
+ Show menu "Measure"
+ Menüü "Mõõtmine" näitamine
- Show menu "Ellipses"
- Menüü "Ellipsid" näitamine
+ Show menu "Ellipses"
+ Menüü "Ellipsid" näitamine
Hatches / Solid Fills
Viirutused / Täitevärvid
- Show menu "Edit"
- Menüü "Redigeerimine" näitamine
+ Show menu "Edit"
+ Menüü "Redigeerimine" näitamine
- Show menu "Dimensions"
- Menüü "Mõõdud" näitamine
+ Show menu "Dimensions"
+ Menüü "Mõõdud" näitamine
Texts
Tekstid
- Show menu "Select"
- Menüü "Valimine" näitamine
+ Show menu "Select"
+ Menüü "Valimine" näitamine
Create Block
@@ -1407,8 +1428,8 @@ in a separate window
Rasterpilt
- Show menu "Splines"
- Näita menüüd "Kõverad"
+ Show menu "Splines"
+ Näita menüüd "Kõverad"
Points
@@ -1420,7 +1441,7 @@ in a separate window
Polylines
-
+
@@ -1529,7 +1550,7 @@ in a separate window
QG_CadToolBarPolylines
Polylines
-
+
Back to main menu
@@ -1537,27 +1558,27 @@ in a separate window
Create Polyline
-
+
Delete between two nodes
-
+
Add node
-
+
Delete node
-
+
Trim segments
-
+
Append node
-
+
@@ -1832,7 +1853,7 @@ in a separate window
...
-
+
@@ -2066,7 +2087,7 @@ in a separate window
Dimension
-
+
@@ -2182,12 +2203,12 @@ in a separate window
Tere tulemast
- <font size="+1"><b>Welcome to QCad</b>
+ <font size="+1"><b>Welcome to QCad</b>
</font>
<br>
Please choose the unit you want to use for new drawings and your preferred language.<br>
You can changes these settings later in the Options Dialog of QCad.
- <font size="+1"><b>Tere tulemast QCad-i kasutama</b>
+ <font size="+1"><b>Tere tulemast QCad-i kasutama</b>
</font>
<br>
Palun vali uute jooniste jaoks kasutatav ühik ja soovitav töökeel.<br>
@@ -2356,7 +2377,7 @@ Neid sätteid saab hiljem muuta QCad-i dialoogis Sätted.
...
-
+
@@ -2407,7 +2428,7 @@ Neid sätteid saab hiljem muuta QCad-i dialoogis Sätted.
...
-
+
@@ -2458,11 +2479,11 @@ Neid sätteid saab hiljem muuta QCad-i dialoogis Sätted.
...
-
+
Ctrl+S
-
+
@@ -2509,7 +2530,7 @@ Neid sätteid saab hiljem muuta QCad-i dialoogis Sätted.
Preview
-
+
linear
@@ -2556,7 +2577,7 @@ Neid sätteid saab hiljem muuta QCad-i dialoogis Sätted.
Goonid
- Surveyor's units
+ Surveyor's units
Maamõõduühikud
@@ -2564,8 +2585,8 @@ Neid sätteid saab hiljem muuta QCad-i dialoogis Sätted.
Sätted
- For the length formats 'Engineering' and 'Architectural', the unit must be set to Inch.
- Vormingute 'Inseneri' ja 'Arhitekti' puhul peab ühikuks olema toll.
+ For the length formats 'Engineering' and 'Architectural', the unit must be set to Inch.
+ Vormingute 'Inseneri' ja 'Arhitekti' puhul peab ühikuks olema toll.
Extension line extension:
@@ -2952,42 +2973,42 @@ Neid sätteid saab hiljem muuta QCad-i dialoogis Sätted.
Alt+U
-
+
Minimal Grid Spacing (px):
-
+
Program Defaults
-
+
Time between automatc saving of thedocument in minutes.
-
+
Auto save time:
-
+
QG_DlgOptionsVariables
Drawing Variables
-
+
Variable
-
+
Code
-
+
Value
-
+
&OK
@@ -3089,7 +3110,7 @@ Neid sätteid saab hiljem muuta QCad-i dialoogis Sätted.
...
-
+
@@ -3140,7 +3161,7 @@ Neid sätteid saab hiljem muuta QCad-i dialoogis Sätted.
...
-
+
@@ -3191,7 +3212,7 @@ Neid sätteid saab hiljem muuta QCad-i dialoogis Sätted.
...
-
+
@@ -3900,7 +3921,7 @@ Neid sätteid saab hiljem muuta QCad-i dialoogis Sätted.
again Still No Text supplied.
-
+
@@ -4506,7 +4527,7 @@ Neid sätteid saab hiljem muuta QCad-i dialoogis Sätted.
...
-
+
@@ -4548,11 +4569,11 @@ Neid sätteid saab hiljem muuta QCad-i dialoogis Sätted.
Tangential
-
+
Tan Radius
-
+
Angle
@@ -4735,19 +4756,19 @@ Neid sätteid saab hiljem muuta QCad-i dialoogis Sätted.
0.05mm
-
+
0.09mm
-
+
0.13mm (ISO)
-
+
0.15mm
-
+
0.18mm (ISO)
@@ -4841,12 +4862,12 @@ Neid sätteid saab hiljem muuta QCad-i dialoogis Sätted.
Eemalda kile
- Layer "%1" and all entities on it will be removed.
- Kile "%1" ja kõik elemendid temal eemaldatakse.
+ Layer "%1" and all entities on it will be removed.
+ Kile "%1" ja kõik elemendid temal eemaldatakse.
- Layer "%1" can never be removed.
- Kilet "%1" ei saa kunagi eemaldada.
+ Layer "%1" can never be removed.
+ Kilet "%1" ei saa kunagi eemaldada.
Layer Dialog
@@ -4857,16 +4878,16 @@ Neid sätteid saab hiljem muuta QCad-i dialoogis Sätted.
Eemalda plokk
- Block "%1" and all its entities will be removed.
- Plokk "%1" ja kõik tema elemendid eemaldatakse.
+ Block "%1" and all its entities will be removed.
+ Plokk "%1" ja kõik tema elemendid eemaldatakse.
Layer Properties
Kile omadused
- Layer with a name "%1" already exists. Please specify a different name.
- Kile nimega "%1" on juba olemas. Palun määra muu nimi.
+ Layer with a name "%1" already exists. Please specify a different name.
+ Kile nimega "%1" on juba olemas. Palun määra muu nimi.
@@ -4967,83 +4988,83 @@ Tahad sa seda asendada?
Inch
-
+
Foot
-
+
Mile
-
+
Millimeter
-
+
Centimeter
-
+
Meter
-
+
Kilometer
-
+
Microinch
-
+
Mil
-
+
Yard
-
+
Angstrom
-
+
Nanometer
-
+
Micron
-
+
Decimeter
-
+
Decameter
-
+
Hectometer
-
+
Gigameter
-
+
Astro
-
+
Lightyear
-
+
Parsec
-
+
Export Image
@@ -5055,12 +5076,16 @@ Tahad sa seda asendada?
Loading Library Paths..
- Teekide asukohtade laadimine..
+ Teekide asukohtade laadimine..
Loading File %1..
Faili %1 laadimine..
+
+ Loading...
+
+
RS_ActionBlocksAdd
@@ -5207,8 +5232,8 @@ Tahad sa seda asendada?
Sisesta ridade vahe:
-
-
+
+
@@ -5601,11 +5626,11 @@ Määra alguspunkt või [keskpunkt]
RS_ActionDrawArcTangential
Arc: Tangential
-
+
Specify base entity
-
+
Cancel
@@ -5881,8 +5906,8 @@ Määra alguspunkt või [keskpunkt]
Sisesta tegur:
-
-
+
+
@@ -6217,8 +6242,8 @@ Määra alguspunkt või [keskpunkt]
Vigane avaldis
-
-
+
+
@@ -6514,7 +6539,7 @@ Määra alguspunkt või [keskpunkt]
Undo disallowed due a fatal bug somewhere. Sorry.
-
+
@@ -6688,7 +6713,7 @@ Määra alguspunkt või [keskpunkt]
&New...
-
+
@@ -7067,12 +7092,12 @@ Määra alguspunkt või [keskpunkt]
Sisesta tegur:
-
-
+
+
- Cannot open file '%1'
-
+ Cannot open file '%1'
+
@@ -7196,11 +7221,11 @@ Määra alguspunkt või [keskpunkt]
&Divide
-
+
Entity must be a line, arc, circle or ellipse.
-
+
@@ -7246,35 +7271,35 @@ Määra alguspunkt või [keskpunkt]
Entities not in the same polyline.
-
+
Parent of second entity is not a polyline
-
+
Parent of second entity is NULL
-
+
One of the chosen entities is NULL
-
+
Parent of first entity is not a polyline
-
+
Parent of first entity is NULL
-
+
First entity is NULL
-
+
Second entity is NULL
-
+
@@ -7715,11 +7740,11 @@ Määra alguspunkt või [keskpunkt]
&Add node
-
+
- Add polyline's node
-
+ Add polyline's node
+
No Entity found.
@@ -7727,23 +7752,23 @@ Määra alguspunkt või [keskpunkt]
Entity must be a polyline.
-
+
Adding point is invalid.
-
+
Adding point is not on entity.
-
+
Specify polyline to add nodes
-
+
- Specify adding node's point
-
+ Specify adding node's point
+
@@ -7754,11 +7779,11 @@ Määra alguspunkt või [keskpunkt]
A&ppend node
-
+
- Append polyline's node
-
+ Append polyline's node
+
No Entity found.
@@ -7766,15 +7791,15 @@ Määra alguspunkt või [keskpunkt]
Entity must be a polyline.
-
+
Click somewhere near the beginning or end of existing polyline.
-
+
Specify the polyline somewhere near the beginning or end point
-
+
Specify next point or [%1]
@@ -7801,11 +7826,11 @@ Määra alguspunkt või [keskpunkt]
&Delete node
-
+
- Delete polyline's node
-
+ Delete polyline's node
+
No Entity found.
@@ -7813,23 +7838,23 @@ Määra alguspunkt või [keskpunkt]
Entity must be a polyline.
-
+
Adding point is invalid.
-
+
Adding point is not on entity.
-
+
Specify polyline to delete node
-
+
- Specify deleting node's point
-
+ Specify deleting node's point
+
@@ -7844,11 +7869,11 @@ Määra alguspunkt või [keskpunkt]
Delete &between two nodes
-
+
Delete between two nodes
-
+
No Entity found.
@@ -7856,42 +7881,42 @@ Määra alguspunkt või [keskpunkt]
Entity must be a polyline.
-
+
Deletinging point is invalid.
-
+
Deleting point is not on entity.
-
+
Deleteinging point is not on entity.
-
+
Specify polyline to delete between two nodes
-
+
Specify first node
-
+
Specify second node
-
+
RS_ActionPolylineEquidistant
Create &Equidistant Polylines
-
+
Create Equidistant Polylines
-
+
No Entity found.
@@ -7899,11 +7924,11 @@ Määra alguspunkt või [keskpunkt]
Entity must be a polyline.
-
+
Choose the original polyline
-
+
Cancel
@@ -7914,11 +7939,11 @@ Määra alguspunkt või [keskpunkt]
RS_ActionPolylineSegment
Create Polyline from Existing &Segments
-
+
Create Polyline from Existing Segments
-
+
No Entity found.
@@ -7926,11 +7951,11 @@ Määra alguspunkt või [keskpunkt]
Entity must be a line or arc.
-
+
Choose one of the segments on the original polyline
-
+
Cancel
@@ -7949,11 +7974,11 @@ Määra alguspunkt või [keskpunkt]
&Trim segments
-
+
- Trim polyline's segments
-
+ Trim polyline's segments
+
No Entity found.
@@ -7961,27 +7986,27 @@ Määra alguspunkt või [keskpunkt]
Entity must be a polyline.
-
+
Specifying point is invalid.
-
+
No Segment found on entity.
-
+
Specify polyline to trim
-
+
Specify first segment
-
+
Specify second segment
-
+
@@ -8027,7 +8052,7 @@ Määra alguspunkt või [keskpunkt]
Ctrl+K
-
+
@@ -9020,7 +9045,7 @@ Määra alguspunkt või [keskpunkt]
polyline
-
+
pa
@@ -9030,7 +9055,7 @@ Määra alguspunkt või [keskpunkt]
tm
modify - multi trim (extend)
-
+
da
@@ -9054,7 +9079,7 @@ Määra alguspunkt või [keskpunkt]
tm
-
+
xt
@@ -9122,7 +9147,7 @@ Määra alguspunkt või [keskpunkt]
sn
-
+
sm
@@ -9138,20 +9163,20 @@ Määra alguspunkt või [keskpunkt]
kill
-
+
k
-
+
back
-
+
b
back
-
+
diff --git a/ts/librecad_fi.ts b/ts/librecad_fi.ts
index f5532ed747..821c8a6459 100644
--- a/ts/librecad_fi.ts
+++ b/ts/librecad_fi.ts
@@ -1,230 +1,236 @@
+
QC_ApplicationWindow
-
+
&Plugins
&Lisäosat
-
- Running script '%1'
+
+ Running script '%1'
Suoritetaan skriptiä ’%1’
-
- Inserting block '%1'
-
+
+ Inserting block '%1'
+
-
+
&File
&Tiedosto
-
+
Import
Tuo
-
+
&Edit
&Muokkaa
-
+
&View
&Näytä
-
+
+ &Toolbars
+
+
+
+
Focus on &Command Line
&Tarkenna komentoriville
-
+
CTRL+M
CTRL + M
-
+
&Select
&Valitse
-
+
&Draw
&Piirrä
-
+
&Point
-
+
-
+
&Line
-
+
-
+
&Arc
&Arkki
-
+
&Circle
&Ympyrä
-
+
&Ellipse
&Ellipsi
-
+
&Spline
-
+
-
+
&Polyline
-
+
-
-
+
+
&Dimension
&Ulottuvuus
-
+
&Modify
&Muokkaa
-
+
&Snap
-
+
-
+
&Info
&Info
-
+
&Layer
&Taso
-
+
&Block
-
+
-
+
&Scripts
&Skriptit
-
+
&CAM
-
+
-
+
About
Tietoa ohjelmasta
-
+
&Manual
-
+
-
+
Insert Image
Lisää kuva
-
+
&Window
&Ikkuna
-
+
&Help
&Ohje
-
+
De&bugging
&Virheenetsintä
-
+
Layer List
Tasolista
-
+
Block List
-
+
-
+
Library Browser
-
+
-
+
Command line
Komentorivi
-
+
&Cascade
-
+
-
+
&Tile
-
+
-
+
Tile &Horizontally
-
+
-
+
Creating new file...
Luodaan uutta tiedostoa...
-
- Block '%1'
-
+
+ Block '%1'
+
-
+
unnamed document %1
nimetön dokumentti %1
-
+
New Drawing created.
Uusi piirros luotu.
-
+
Opening recent file...
Avaa viimeaikainen tiedosto
-
+
Cannot open the file
%1
Please check the permissions.
@@ -233,29 +239,29 @@ Please check the permissions.
Tiedoston oikeudet saattavat olla väärin.
-
+
Loaded document:
Dokumentti avattu:
-
+
Opening aborted
Avaaminen keskeytetty
-
+
Saving drawing...
Tallennetaan piirrosta...
-
-
+
+
Saved drawing: %1
Piirros %1 tallennettu.
-
-
+
+
Cannot save the file
%1
Please check the permissions.
@@ -264,22 +270,22 @@ Please check the permissions.
Ei voitu tallentaa. Tiedoston oikeudet voivat olla väärin.
-
+
Saving drawing under new filename...
Tallennetaan piirrosta toisella tiedostonimellä...
-
+
Auto-saving drawing...
Automaattitallennetaan piirrosta...
-
+
Auto-saved drawing
Piirros automaattitallennettu
-
+
Cannot auto-save the file
%1
Please check the permissions.
@@ -290,89 +296,104 @@ Ei voitu automaattitallentaa. Tiedoston oikeudet voivat olla väärin.
Automaattitallennus otettu pois käytöstä.
-
+
Exporting drawing...
Viedään piirrosta....
-
+
Exported: %1
Viedään: %1
-
+
Exporting...
-
+
-
+
Export complete
-
+
-
+
Export failed!
-
+
-
+
Printing...
-
+
-
+
Printing complete
-
+
-
+
Print preview for %1
-
+
-
+
Exiting application...
-
+
-
+
None
-
+
-
+
About...
-
+
-
+
Version: %1 %2
-
+
-
+
SVN Revision: %1
-
+
+
+
+
+ Compiled on: %1
+
-
- Date: %1
-
+
+ Program Icons Supplied by
+
-
+
+ Splash and Logo supplied by
+
+
+
+
Modules: %1
-
+
-
+
+ Main Website :
+
+
+
+
Help
-
+
-
- Bugger, I couldn't find the helpfiles on the filesystem.
-
+
+ Bugger, I couldn't find the helpfiles on the filesystem.
+
@@ -380,142 +401,142 @@ Automaattitallennus otettu pois käytöstä.
Do you really want to close the drawing?
-
+
Do you really want to close the file
%1?
-
+
Closing Drawing
-
+
QG_ActionFactory
-
+
&Export...
-
+
-
+
&Close
-
+
-
+
&Print...
-
+
-
+
&Quit
-
+
-
-
+
+
&Grid
-
+
-
+
CTRL-G
-
+
-
+
&Draft
-
+
-
+
&Statusbar
-
+
-
+
&back
-
+
-
+
&Free
-
+
-
+
&Endpoints
-
+
-
+
&On Entity
-
+
-
+
&Center
-
+
-
+
&Middle
-
+
-
+
&Distance from Endpoint
-
+
-
+
&Intersection
-
+
-
+
Restrict &Nothing
-
+
-
+
Restrict &Orthogonally
-
+
-
+
Restrict &Horizontally
-
+
-
+
Restrict&Vertically
-
+
-
+
&Preferences
-
+
-
+
&Application Preferences
-
+
-
+
Open IDE
-
+
-
+
Run Script..
-
+
@@ -523,17 +544,17 @@ Automaattitallennus otettu pois käytöstä.
Arc Options
-
+
Clockwise
-
+
Counter Clockwise
-
+
@@ -541,12 +562,12 @@ Automaattitallennus otettu pois käytöstä.
Tangential Arc Options
-
+
Radius:
-
+
@@ -554,27 +575,27 @@ Automaattitallennus otettu pois käytöstä.
Bevel Options
-
+
Trim
-
+
Check to trim both entities to the bevel
-
+
Length 1:
-
+
Length 2:
-
+
@@ -582,131 +603,131 @@ Automaattitallennus otettu pois käytöstä.
Block Settings
-
+
Block Name:
-
+
&OK
-
+
Alt+O
-
+
Cancel
-
+
Esc
-
+
Renaming Block
-
+
- Could not name block. A block named "%1" already exists.
-
+ Could not name block. A block named "%1" already exists.
+
QG_BlockWidget
-
+
Show all blocks
-
+
-
+
Hide all blocks
-
+
-
+
Add a block
-
+
-
+
Remove the active block
-
+
-
+
Rename the active block
-
+
-
+
Edit the active block
in a separate window
-
+
-
+
Insert the active block
-
+
-
+
Block Menu
-
+
-
+
&Defreeze all Blocks
-
+
-
+
&Freeze all Blocks
-
+
-
+
&Add Block
-
+
-
+
&Remove Block
-
+
-
+
&Rename Block
-
+
-
+
&Edit Block
-
+
-
+
&Insert Block
-
+
-
+
&Toggle Visibility
-
+
-
+
&Create New Block
-
+
@@ -714,7 +735,7 @@ in a separate window
CAD Tools
-
+
@@ -722,32 +743,32 @@ in a separate window
Arcs
-
+
Back to main menu
-
+
Concentric
-
+
Arc with Center, Point, Angles
-
+
Arc with three points
-
+
Arc tangential to base entity with radius
-
+
@@ -755,37 +776,37 @@ in a separate window
Circles
-
+
Circle with two opposite points
-
+
Circle with center and radius
-
+
Circle with center and point
-
+
Circle with three points
-
+
Back to main menu
-
+
Concentric
-
+
@@ -793,52 +814,52 @@ in a separate window
Dimensions
-
+
Back to main menu
-
+
Aligned Dimension
-
+
Linear Dimension
-
+
Horizontal Dimension
-
+
Vertical Dimension
-
+
Radial Dimension
-
+
Diametric Dimension
-
+
Angular Dimension
-
+
Leader
-
+
@@ -846,22 +867,22 @@ in a separate window
Ellipses
-
+
Ellipse arc with center, two points and angles
-
+
Ellipse with Center and two points
-
+
Back to main menu
-
+
@@ -869,37 +890,37 @@ in a separate window
Info
-
+
Distance (Point, Point)
-
+
Distance (Entity, Point)
-
+
Back to main menu
-
+
Angle
-
+
Total length of selected entities
-
+
Area of polygon
-
+
@@ -907,87 +928,87 @@ in a separate window
Lines
-
+
Back to main menu
-
+
Line with two points
-
+
Line with given angle
-
+
Horizontal lines
-
+
Vertical lines
-
+
Rectangles
-
+
Bisectors
-
+
Parallels with distance
-
+
Tangents from point to circle
-
+
Tangents from circle to circle
-
+
Orthogonal lines
-
+
Lines with relative angles
-
+
Polygons with Center and Corner
-
+
Polygons with two Corners
-
+
Freehand lines
-
+
Parallels through point
-
+
@@ -995,82 +1016,82 @@ in a separate window
Main
-
+
- Show menu "Lines"
-
+ Show menu "Lines"
+
- Show menu "Arcs"
-
+ Show menu "Arcs"
+
Points
-
+
Splines
-
+
- Show menu "Ellipses"
-
+ Show menu "Ellipses"
+
- Show menu "Circles"
-
+ Show menu "Circles"
+
Texts
-
+
- Show menu "Dimensions"
-
+ Show menu "Dimensions"
+
Hatches / Solid Fills
-
+
Raster Image
-
+
- Show menu "Edit"
-
+ Show menu "Edit"
+
- Show menu "Measure"
-
+ Show menu "Measure"
+
Create Block
-
+
- Show menu "Select"
-
+ Show menu "Select"
+
Polylines
-
+
@@ -1078,107 +1099,107 @@ in a separate window
Modify
-
+
Back to main menu
-
+
Stretch
-
+
Round
-
+
Bevel
-
+
Trim by amount
-
+
Trim / Extend
-
+
Delete
-
+
Edit Entity Attributes
-
+
Mirror
-
+
Scale
-
+
Rotate
-
+
Move
-
+
Move and Rotate
-
+
Rotate around two centers
-
+
Trim / Extend two
-
+
Divide
-
+
Explode
-
+
Explode Text into Letters
-
+
Edit Entity Geometry
-
+
Edit Text
-
+
@@ -1186,17 +1207,17 @@ in a separate window
Points
-
+
Back to main menu
-
+
Single points
-
+
@@ -1204,42 +1225,42 @@ in a separate window
Polylines
-
+
Back to main menu
-
+
Create Polyline
-
+
Trim segments
-
+
Delete between two nodes
-
+
Delete node
-
+
Add node
-
+
Append node
-
+
@@ -1247,67 +1268,67 @@ in a separate window
Select
-
+
Select all
-
+
Back to main menu
-
+
Select intersected entities
-
+
Deselect intersected entities
-
+
Deselect all
-
+
Invert Selection
-
+
Select layer
-
+
(De-)Select contour
-
+
(De-)Select entity
-
+
Deselect Window
-
+
Select Window
-
+
Continue action
-
+
@@ -1315,87 +1336,87 @@ in a separate window
Snap
-
+
Back to main menu
-
+
Snap to grid
-
+
Free positioning
-
+
Snap to Endpoints
-
+
Snap to closest point on entity
-
+
Snap to center points
-
+
Snap to middle points
-
+
Snap to point with given distance to endpoint
-
+
Snap to intersections automatically
-
+
No Restriction
-
+
Orthogonal Restriction
-
+
Horizontal Restriction
-
+
Vertical Restriction
-
+
Move relative Zero
-
+
Lock relative Zero
-
+
Snap to intersections manually
-
+
@@ -1403,17 +1424,17 @@ in a separate window
Splines
-
+
Back to main menu
-
+
Spline
-
+
@@ -1421,12 +1442,12 @@ in a separate window
Circle Options
-
+
Radius:
-
+
@@ -1434,68 +1455,68 @@ in a separate window
Unchanged
-
+
By Layer
-
+
By Block
-
+
Red
-
+
Yellow
-
+
Green
-
+
Cyan
-
+
Blue
-
+
Magenta
-
+
Black / White
-
+
Gray
-
+
Light Gray
-
+
Others..
-
+
@@ -1503,13 +1524,13 @@ in a separate window
Command Line
-
+
Command:
-
+
@@ -1521,7 +1542,7 @@ in a separate window
Coordinates
-
+
@@ -1529,12 +1550,12 @@ in a separate window
Linear Dimension Options
-
+
Angle:
-
+
@@ -1542,48 +1563,48 @@ in a separate window
Dimension Options
-
+
Label:
-
+
ø
-
+
°
-
+
±
-
+
¶
-
+
×
-
+
÷
-
+
...
-
+
@@ -1591,52 +1612,52 @@ in a separate window
Dimension Label Editor
-
+
Dimension Label:
-
+
Label:
-
+
Insert:
-
+
ø (Diameter)
-
+
° (Degree)
-
+
± (Plus / Minus)
-
+
¶ (Pi)
-
+
× (Times)
-
+
÷ (Division)
-
+
@@ -1644,67 +1665,67 @@ in a separate window
Arc
-
+
Layer:
-
+
Geometry
-
+
Radius:
-
+
Center (y):
-
+
Center (x):
-
+
Start Angle:
-
+
End Angle:
-
+
Reversed
-
+
&OK
-
+
Alt+O
-
+
Cancel
-
+
Esc
-
+
@@ -1712,32 +1733,32 @@ in a separate window
Attributes
-
+
Layer:
-
+
&OK
-
+
Alt+O
-
+
Cancel
-
+
Esc
-
+
@@ -1745,52 +1766,52 @@ in a separate window
Circle
-
+
Layer:
-
+
Geometry
-
+
Radius:
-
+
Center (y):
-
+
Center (x):
-
+
&OK
-
+
Alt+O
-
+
Cancel
-
+
Esc
-
+
@@ -1798,42 +1819,42 @@ in a separate window
Linear Dimension
-
+
Layer:
-
+
Geometry
-
+
Angle:
-
+
&OK
-
+
Alt+O
-
+
Cancel
-
+
Esc
-
+
@@ -1841,32 +1862,32 @@ in a separate window
Dimension
-
+
Layer:
-
+
&OK
-
+
Alt+O
-
+
Cancel
-
+
Esc
-
+
@@ -1874,77 +1895,77 @@ in a separate window
Ellipse
-
+
Layer:
-
+
Geometry
-
+
Center (y):
-
+
Center (x):
-
+
End Angle:
-
+
Start Angle:
-
+
Rotation:
-
+
Minor:
-
+
Major:
-
+
Reversed
-
+
&OK
-
+
Alt+O
-
+
Cancel
-
+
Esc
-
+
@@ -1952,52 +1973,52 @@ in a separate window
Choose Hatch Attributes
-
+
Pattern
-
+
Angle:
-
+
Scale:
-
+
Solid Fill
-
+
Preview
-
+
Enable Preview
-
+
&OK
-
+
Alt+O
-
+
Cancel
-
+
@@ -2005,41 +2026,41 @@ in a separate window
Welcome
-
+
- <font size="+1"><b>Welcome to QCad</b>
+ <font size="+1"><b>Welcome to QCad</b>
</font>
<br>
Please choose the unit you want to use for new drawings and your preferred language.<br>
You can changes these settings later in the Options Dialog of QCad.
-
+
Default Unit:
-
+
GUI Language:
-
+
Command Language:
-
+
OK
-
+
Enter
-
+
@@ -2047,72 +2068,72 @@ You can changes these settings later in the Options Dialog of QCad.
Insert
-
+
Layer:
-
+
Geometry
-
+
Insertion point (x):
-
+
Insertion point (y):
-
+
Scale:
-
+
Angle:
-
+
Rows:
-
+
Columns:
-
+
Row Spacing:
-
+
Column Spacing:
-
+
&OK
-
+
Cancel
-
+
Esc
-
+
@@ -2120,52 +2141,52 @@ You can changes these settings later in the Options Dialog of QCad.
Line
-
+
Layer:
-
+
Geometry
-
+
End point (x):
-
+
End point (y):
-
+
Start point (y):
-
+
Start point (x):
-
+
&OK
-
+
Cancel
-
+
Esc
-
+
@@ -2173,52 +2194,52 @@ You can changes these settings later in the Options Dialog of QCad.
Mirroring Options
-
+
Number of copies
-
+
&Delete Original
-
+
&Keep Original
-
+
Use current &attributes
-
+
Use current &layer
-
+
&OK
-
+
Cancel
-
+
Esc
-
+
...
-
+
@@ -2226,62 +2247,62 @@ You can changes these settings later in the Options Dialog of QCad.
Moving Options
-
+
Number of copies
-
+
&Delete Original
-
+
&Keep Original
-
+
&Multiple Copies
-
+
Use current &attributes
-
+
Use current &layer
-
+
&OK
-
+
Alt+O
-
+
Cancel
-
+
Esc
-
+
...
-
+
@@ -2289,67 +2310,67 @@ You can changes these settings later in the Options Dialog of QCad.
Move/Rotate Options
-
+
&OK
-
+
Cancel
-
+
Esc
-
+
...
-
+
Ctrl+S
-
+
&Angle (a):
-
+
Use current &attributes
-
+
Use current &layer
-
+
Number of copies
-
+
&Delete Original
-
+
&Keep Original
-
+
&Multiple Copies
-
+
@@ -2357,118 +2378,118 @@ You can changes these settings later in the Options Dialog of QCad.
Drawing Preferences
-
+
&Paper
-
+
Paper Format
-
+
&Landscape
-
+
P&ortrait
-
+
Paper &Height:
-
+
Paper &Width:
-
+
&Units
-
+
Main Unit
-
+
&Main drawing unit:
-
+
Length
-
+
&Format:
-
+
P&recision:
-
+
Preview
-
+
linear
-
+
Angle
-
+
F&ormat:
-
+
Pre&cision:
-
+
angular
-
+
&Grid
-
+
Grid Settings
-
+
Show Grid
-
+
X Spacing:
-
+
@@ -2478,19 +2499,19 @@ You can changes these settings later in the Options Dialog of QCad.
auto
-
+
0.01
-
+
0.1
-
+
@@ -2501,28 +2522,28 @@ You can changes these settings later in the Options Dialog of QCad.
1
-
+
10
-
+
Y Spacing:
-
+
&Dimensions
-
+
Text Height:
-
+
@@ -2531,7 +2552,7 @@ You can changes these settings later in the Options Dialog of QCad.
units
-
+
@@ -2541,7 +2562,7 @@ You can changes these settings later in the Options Dialog of QCad.
2
-
+
@@ -2550,142 +2571,142 @@ You can changes these settings later in the Options Dialog of QCad.
5
-
+
Extension line extension:
-
+
Arrow size:
-
+
Dimension line gap:
-
+
Extension line offset:
-
+
Splines
-
+
Number of line segments per spline patch:
-
+
4
-
+
8
-
+
16
-
+
32
-
+
64
-
+
&OK
-
+
Alt+O
-
+
Cancel
-
+
Esc
-
+
Scientific
-
+
Decimal
-
+
Engineering
-
+
Architectural
-
+
Fractional
-
+
Decimal Degrees
-
+
Deg/min/sec
-
+
Gradians
-
+
Radians
-
+
- Surveyor's units
-
+ Surveyor's units
+
Options
-
+
- For the length formats 'Engineering' and 'Architectural', the unit must be set to Inch.
-
+ For the length formats 'Engineering' and 'Architectural', the unit must be set to Inch.
+
@@ -2693,320 +2714,320 @@ You can changes these settings later in the Options Dialog of QCad.
Application Preferences
-
+
&Appearance
-
+
Language
-
+
&GUI Language:
-
+
&Command Language:
-
+
Colors
-
+
Backgr&ound:
-
+
G&rid Color:
-
+
#000000
-
+
#ffffff
-
+
#c0c0c0
-
+
#808080
-
+
&Meta Grid Color:
-
+
#404040
-
+
S&elected Color:
-
+
#a54747
-
+
#739373
-
+
&Highlighted Color:
-
+
Fontsize
-
+
Statusbar:
-
+
5
-
+
6
-
+
7
-
+
8
-
+
9
-
+
10
-
+
11
-
+
12
-
+
14
-
+
Graphic View
-
+
&Show large crosshairs
-
+
Alt+S
-
+
A&utomatically scale grid
-
+
Alt+U
-
+
Number of p&review entities:
-
+
0
-
+
50
-
+
100
-
+
200
-
+
Minimal Grid Spacing (px):
-
+
4
-
+
15
-
+
20
-
+
&Paths
-
+
Translations:
-
+
Hatch Patterns:
-
+
Fonts:
-
+
Scripts:
-
+
Part Libraries:
-
+
&Defaults
-
+
Defaults for new drawings
-
+
&Unit:
-
+
Program Defaults
-
+
Time between automatc saving of thedocument in minutes.
-
+
Auto save time:
-
+
&OK
-
+
Alt+O
-
+
Cancel
-
+
Esc
-
+
Preferences
-
+
Please restart the application to apply all changes.
-
+
@@ -3014,42 +3035,42 @@ You can changes these settings later in the Options Dialog of QCad.
Drawing Variables
-
+
Variable
-
+
Code
-
+
Value
-
+
&OK
-
+
Alt+O
-
+
Cancel
-
+
Esc
-
+
@@ -3057,42 +3078,42 @@ You can changes these settings later in the Options Dialog of QCad.
Point
-
+
Layer:
-
+
Geometry
-
+
Position (y):
-
+
Position (x):
-
+
&OK
-
+
Cancel
-
+
Esc
-
+
@@ -3100,62 +3121,62 @@ You can changes these settings later in the Options Dialog of QCad.
Rotation Options
-
+
&OK
-
+
&Cancel
-
+
Esc
-
+
Number of copies
-
+
&Delete Original
-
+
&Keep Original
-
+
&Multiple Copies:
-
+
...
-
+
&Angle (a):
-
+
Use current &attributes
-
+
Use current &layer
-
+
@@ -3163,62 +3184,62 @@ You can changes these settings later in the Options Dialog of QCad.
Rotate Two Options
-
+
&OK
-
+
Cancel
-
+
Number of copies
-
+
&Delete Original
-
+
&Keep Original
-
+
&Multiple Copies
-
+
...
-
+
Angle (&a):
-
+
Angle (&b):
-
+
Use current &attributes
-
+
Use current &layer
-
+
@@ -3226,62 +3247,62 @@ You can changes these settings later in the Options Dialog of QCad.
Scaling Options
-
+
&OK
-
+
&Cancel
-
+
Esc
-
+
...
-
+
&Factor (f):
-
+
Use current &attributes
-
+
Use current &layer
-
+
Number of copies
-
+
&Delete Original
-
+
&Keep Original
-
+
&Multiple Copies
-
+
@@ -3289,62 +3310,62 @@ You can changes these settings later in the Options Dialog of QCad.
Spline
-
+
Layer:
-
+
Geometry
-
+
Degree:
-
+
Closed
-
+
1
-
+
2
-
+
3
-
+
&OK
-
+
Alt+O
-
+
Cancel
-
+
Esc
-
+
@@ -3352,767 +3373,767 @@ You can changes these settings later in the Options Dialog of QCad.
Text
-
+
Font
-
+
&Height:
-
+
Line &spacing:
-
+
&Default line spacing
-
+
Alt+D
-
+
Alignment
-
+
Top Right
-
+
Top Left
-
+
Middle Left
-
+
Middle Center
-
+
Middle Right
-
+
Bottom Left
-
+
Bottom Right
-
+
Bottom Center
-
+
Top Center
-
+
Angle
-
+
Text:
-
+
Clear Text
-
+
Load Text From File
-
+
Save Text To File
-
+
Cut
-
+
Copy
-
+
Paste
-
+
Insert Symbol
-
+
Diameter (ø)
-
+
Degree (°)
-
+
Plus / Minus (±)
-
+
At (@)
-
+
Hash (#)
-
+
Dollar ($)
-
+
Copyright (©)
-
+
Registered (®)
-
+
Paragraph (§)
-
+
Pi (π)
-
+
Pound (£)
-
+
Yen (¥)
-
+
Times (×)
-
+
Division (÷)
-
+
Insert Unicode
-
+
Page:
-
+
Char:
-
+
[0000-007F] Basic Latin
-
+
[0080-00FF] Latin-1 Supplementary
-
+
[0100-017F] Latin Extended-A
-
+
[0180-024F] Latin Extended-B
-
+
[0250-02AF] IPA Extensions
-
+
[02B0-02FF] Spacing Modifier Letters
-
+
[0300-036F] Combining Diacritical Marks
-
+
[0370-03FF] Greek and Coptic
-
+
[0400-04FF] Cyrillic
-
+
[0500-052F] Cyrillic Supplementary
-
+
[0530-058F] Armenian
-
+
[0590-05FF] Hebrew
-
+
[0600-06FF] Arabic
-
+
[0700-074F] Syriac
-
+
[0780-07BF] Thaana
-
+
[0900-097F] Devanagari
-
+
[0980-09FF] Bengali
-
+
[0A00-0A7F] Gurmukhi
-
+
[0A80-0AFF] Gujarati
-
+
[0B00-0B7F] Oriya
-
+
[0B80-0BFF] Tamil
-
+
[0C00-0C7F] Telugu
-
+
[0C80-0CFF] Kannada
-
+
[0D00-0D7F] Malayalam
-
+
[0D80-0DFF] Sinhala
-
+
[0E00-0E7F] Thai
-
+
[0E80-0EFF] Lao
-
+
[0F00-0FFF] Tibetan
-
+
[1000-109F] Myanmar
-
+
[10A0-10FF] Georgian
-
+
[1100-11FF] Hangul Jamo
-
+
[1200-137F] Ethiopic
-
+
[13A0-13FF] Cherokee
-
+
[1400-167F] Unified Canadian Aboriginal Syllabic
-
+
[1680-169F] Ogham
-
+
[16A0-16FF] Runic
-
+
[1700-171F] Tagalog
-
+
[1720-173F] Hanunoo
-
+
[1740-175F] Buhid
-
+
[1760-177F] Tagbanwa
-
+
[1780-17FF] Khmer
-
+
[1800-18AF] Mongolian
-
+
[1E00-1EFF] Latin Extended Additional
-
+
[1F00-1FFF] Greek Extended
-
+
[2000-206F] General Punctuation
-
+
[2070-209F] Superscripts and Subscripts
-
+
[20A0-20CF] Currency Symbols
-
+
[20D0-20FF] Combining Marks for Symbols
-
+
[2100-214F] Letterlike Symbols
-
+
[2150-218F] Number Forms
-
+
[2190-21FF] Arrows
-
+
[2200-22FF] Mathematical Operators
-
+
[2300-23FF] Miscellaneous Technical
-
+
[2400-243F] Control Pictures
-
+
[2440-245F] Optical Character Recognition
-
+
[2460-24FF] Enclosed Alphanumerics
-
+
[2500-257F] Box Drawing
-
+
[2580-259F] Block Elements
-
+
[25A0-25FF] Geometric Shapes
-
+
[2600-26FF] Miscellaneous Symbols
-
+
[2700-27BF] Dingbats
-
+
[27C0-27EF] Miscellaneous Mathematical Symbols-A
-
+
[27F0-27FF] Supplemental Arrows-A
-
+
[2800-28FF] Braille Patterns
-
+
[2900-297F] Supplemental Arrows-B
-
+
[2980-29FF] Miscellaneous Mathematical Symbols-B
-
+
[2A00-2AFF] Supplemental Mathematical Operators
-
+
[2E80-2EFF] CJK Radicals Supplement
-
+
[2F00-2FDF] Kangxi Radicals
-
+
[2FF0-2FFF] Ideographic Description Characters
-
+
[3000-303F] CJK Symbols and Punctuation
-
+
[3040-309F] Hiragana
-
+
[30A0-30FF] Katakana
-
+
[3100-312F] Bopomofo
-
+
[3130-318F] Hangul Compatibility Jamo
-
+
[3190-319F] Kanbun
-
+
[31A0-31BF] Bopomofo Extended
-
+
[3200-32FF] Enclosed CJK Letters and Months
-
+
[3300-33FF] CJK Compatibility
-
+
[3400-4DBF] CJK Unified Ideographs Extension A
-
+
[4E00-9FAF] CJK Unified Ideographs
-
+
[A000-A48F] Yi Syllables
-
+
[A490-A4CF] Yi Radicals
-
+
[AC00-D7AF] Hangul Syllables
-
+
[D800-DBFF] High Surrogates
-
+
[DC00-DFFF] Low Surrogate Area
-
+
[E000-F8FF] Private Use Area
-
+
[F900-FAFF] CJK Compatibility Ideographs
-
+
[FB00-FB4F] Alphabetic Presentation Forms
-
+
[FB50-FDFF] Arabic Presentation Forms-A
-
+
[FE00-FE0F] Variation Selectors
-
+
[FE20-FE2F] Combining Half Marks
-
+
[FE30-FE4F] CJK Compatibility Forms
-
+
[FE50-FE6F] Small Form Variants
-
+
[FE70-FEFF] Arabic Presentation Forms-B
-
+
[FF00-FFEF] Halfwidth and Fullwidth Forms
-
+
[FFF0-FFFF] Specials
-
+
[10300-1032F] Old Italic
-
+
[10330-1034F] Gothic
-
+
[10400-1044F] Deseret
-
+
[1D000-1D0FF] Byzantine Musical Symbols
-
+
[1D100-1D1FF] Musical Symbols
-
+
[1D400-1D7FF] Mathematical Alphanumeric Symbols
-
+
[20000-2A6DF] CJK Unified Ideographs Extension B
-
+
[2F800-2FA1F] CJK Compatibility Ideographs Supplement
-
+
[E0000-E007F] Tags
-
+
[F0000-FFFFD] Supplementary Private Use Area-A
-
+
[100000-10FFFD] Supplementary Private Use Area-B
-
+
&OK
-
+
Cancel
-
+
Esc
-
+
@@ -4120,32 +4141,32 @@ You can changes these settings later in the Options Dialog of QCad.
QCad
-
+
C&lose
-
+
&Save
-
+
Save &As..
-
+
&Cancel
-
+
again Still No Text supplied.
-
+
@@ -4153,27 +4174,27 @@ You can changes these settings later in the Options Dialog of QCad.
Insert Options
-
+
Angle:
-
+
Rotation Angle
-
+
Factor:
-
+
Scale Factor
-
+
@@ -4181,157 +4202,157 @@ You can changes these settings later in the Options Dialog of QCad.
Image Export Options
-
+
Bitmap Size
-
+
Width:
-
+
Height:
-
+
480
-
+
640
-
+
Resolution:
-
+
auto
-
+
1
-
+
2
-
+
3
-
+
4
-
+
5
-
+
10
-
+
15
-
+
20
-
+
25
-
+
50
-
+
75
-
+
100
-
+
150
-
+
300
-
+
600
-
+
1200
-
+
Background
-
+
White
-
+
Black
-
+
&OK
-
+
Alt+O
-
+
Cancel
-
+
Esc
-
+
@@ -4339,57 +4360,57 @@ You can changes these settings later in the Options Dialog of QCad.
Insert Options
-
+
Angle:
-
+
Rotation Angle
-
+
Factor:
-
+
Scale Factor
-
+
Array:
-
+
Number of Columns
-
+
Number of Rows
-
+
Spacing:
-
+
Column Spacing
-
+
Row Spacing
-
+
@@ -4397,7 +4418,7 @@ You can changes these settings later in the Options Dialog of QCad.
- Unchanged -
-
+
@@ -4405,37 +4426,37 @@ You can changes these settings later in the Options Dialog of QCad.
Layer Settings
-
+
Layer Name:
-
+
&OK
-
+
Alt+O
-
+
Cancel
-
+
Esc
-
+
Default Pen
-
+
@@ -4443,62 +4464,62 @@ You can changes these settings later in the Options Dialog of QCad.
Show all layers
-
+
Hide all layers
-
+
Add a layer
-
+
Remove the current layer
-
+
Modify layer attributes / rename
-
+
Layer Menu
-
+
&Defreeze all Layers
-
+
&Freeze all Layers
-
+
&Add Layer
-
+
&Remove Layer
-
+
&Edit Layer
-
+
&Toggle Visibility
-
+
@@ -4506,27 +4527,27 @@ You can changes these settings later in the Options Dialog of QCad.
Library Insert Options
-
+
Angle:
-
+
Rotation Angle
-
+
Factor:
-
+
Scale Factor
-
+
@@ -4534,17 +4555,17 @@ You can changes these settings later in the Options Dialog of QCad.
Library Browser
-
+
Directories
-
+
Insert
-
+
@@ -4552,47 +4573,47 @@ You can changes these settings later in the Options Dialog of QCad.
Line Angle Options
-
+
Angle:
-
+
Line angle
-
+
Length:
-
+
Length of line
-
+
Snap Point:
-
+
Start
-
+
Middle
-
+
End
-
+
@@ -4600,27 +4621,27 @@ You can changes these settings later in the Options Dialog of QCad.
Line Bisector Options
-
+
Length:
-
+
Length of bisector
-
+
Number:
-
+
Number of bisectors to create
-
+
@@ -4628,17 +4649,17 @@ You can changes these settings later in the Options Dialog of QCad.
Line Options
-
+
Close
-
+
Undo
-
+
@@ -4646,27 +4667,27 @@ You can changes these settings later in the Options Dialog of QCad.
Line Parallel Options
-
+
Distance:
-
+
Distance to original entity
-
+
Number:
-
+
Number of parallels to create
-
+
@@ -4674,17 +4695,17 @@ You can changes these settings later in the Options Dialog of QCad.
Line Parallel Through Options
-
+
Number:
-
+
Number of parallels to create
-
+
@@ -4692,17 +4713,17 @@ You can changes these settings later in the Options Dialog of QCad.
Polygon Options
-
+
Number:
-
+
Number of edges
-
+
@@ -4710,17 +4731,17 @@ You can changes these settings later in the Options Dialog of QCad.
Polygon Options
-
+
Number:
-
+
Number of edges
-
+
@@ -4728,27 +4749,27 @@ You can changes these settings later in the Options Dialog of QCad.
Line Relative Angle Options
-
+
Angle:
-
+
Line angle
-
+
Length:
-
+
Length of line
-
+
@@ -4756,118 +4777,118 @@ You can changes these settings later in the Options Dialog of QCad.
- Unchanged -
-
+
By Layer
-
+
By Block
-
+
No Pen
-
+
Continuous
-
+
Dot
-
+
Dot (small)
-
+
Dot (large)
-
+
Dash
-
+
Dash (small)
-
+
Dash (large)
-
+
Dash Dot
-
+
Dash Dot (small)
-
+
Dash Dot (large)
-
+
Divide
-
+
Divide (small)
-
+
Divide (large)
-
+
Center
-
+
Center (small)
-
+
Center (large)
-
+
Border
-
+
Border (small)
-
+
Border (large)
-
+
@@ -4875,22 +4896,22 @@ You can changes these settings later in the Options Dialog of QCad.
Mouse
-
+
Right
-
+
Left
-
+
...
-
+
@@ -4898,12 +4919,12 @@ You can changes these settings later in the Options Dialog of QCad.
Move Rotate Options
-
+
Angle:
-
+
@@ -4911,57 +4932,57 @@ You can changes these settings later in the Options Dialog of QCad.
Polyline Options
-
+
Close
-
+
Undo
-
+
Line
-
+
Tangential
-
+
Tan Radius
-
+
Angle
-
+
Radius:
-
+
Angle:
-
+
Clockwise
-
+
Counter Clockwise
-
+
@@ -4969,22 +4990,22 @@ You can changes these settings later in the Options Dialog of QCad.
Print Preview Options
-
+
Toggle Black / White mode
-
+
Center to page
-
+
Fit to page
-
+
@@ -4992,22 +5013,22 @@ You can changes these settings later in the Options Dialog of QCad.
Round Options
-
+
Trim
-
+
Check to trim both edges to the rounding
-
+
Radius:
-
+
@@ -5015,17 +5036,17 @@ You can changes these settings later in the Options Dialog of QCad.
Selection
-
+
Selected Entities:
-
+
0
-
+
@@ -5033,12 +5054,12 @@ You can changes these settings later in the Options Dialog of QCad.
Snap Distance Options
-
+
Distance:
-
+
@@ -5046,37 +5067,37 @@ You can changes these settings later in the Options Dialog of QCad.
Spline Options
-
+
Degree:
-
+
1
-
+
2
-
+
3
-
+
Closed
-
+
Undo
-
+
@@ -5084,17 +5105,17 @@ You can changes these settings later in the Options Dialog of QCad.
Text Options
-
+
Text:
-
+
Angle:
-
+
@@ -5102,17 +5123,17 @@ You can changes these settings later in the Options Dialog of QCad.
Trim Amount Options
-
+
Distance. Negative values for trimming, positive values for extending.
-
+
Amount:
-
+
@@ -5121,22 +5142,22 @@ You can changes these settings later in the Options Dialog of QCad.
Pen
-
+
Line type:
-
+
Width:
-
+
Color:
-
+
@@ -5144,196 +5165,196 @@ You can changes these settings later in the Options Dialog of QCad.
- Unchanged -
-
+
By Layer
-
+
By Block
-
+
Default
-
+
0.00mm
-
+
0.05mm
-
+
0.09mm
-
+
0.13mm (ISO)
-
+
0.15mm
-
+
0.18mm (ISO)
-
+
0.20mm
-
+
0.25mm (ISO)
-
+
0.30mm
-
+
0.35mm (ISO)
-
+
0.40mm
-
+
0.50mm (ISO)
-
+
0.53mm
-
+
0.60mm
-
+
0.70mm (ISO)
-
+
0.80mm
-
+
0.90mm
-
+
1.00mm (ISO)
-
+
1.06mm
-
+
1.20mm
-
+
1.40mm (ISO)
-
+
1.58mm
-
+
2.00mm (ISO)
-
+
2.11mm
-
+
QMessageBox
-
-
-
-
+
+
+
+
Warning
-
+
Layer Properties
-
+
- Layer with a name "%1" already exists. Please specify a different name.
-
+ Layer with a name "%1" already exists. Please specify a different name.
+
Remove Layer
-
+
- Layer "%1" and all entities on it will be removed.
-
+ Layer "%1" and all entities on it will be removed.
+
- Layer "%1" can never be removed.
-
+ Layer "%1" can never be removed.
+
Layer Dialog
-
+
Remove Block
-
+
- Block "%1" and all its entities will be removed.
-
+ Block "%1" and all its entities will be removed.
+
@@ -5341,239 +5362,239 @@ You can changes these settings later in the Options Dialog of QCad.
None
-
+
Inch
-
+
Foot
-
+
Mile
-
+
Millimeter
-
+
Centimeter
-
+
Meter
-
+
Kilometer
-
+
Microinch
-
+
Mil
-
+
Yard
-
+
Angstrom
-
+
Nanometer
-
+
Micron
-
+
Decimeter
-
+
Decameter
-
+
Hectometer
-
+
Gigameter
-
+
Astro
-
+
Lightyear
-
+
Parsec
-
+
-
+
Loading..
-
+
-
- Loading Library Paths..
-
+
+ Loading...
+
-
+
Loading File %1..
-
+
All Image Files (%1)
-
+
All Files (*.*)
-
+
Open Image
-
+
Windows Bitmap
-
+
Joint Photographic Experts Group
-
+
Graphics Interchange Format
-
+
Multiple-image Network Graphics
-
+
Portable Bit Map
-
+
Portable Grey Map
-
+
Portable Network Graphic
-
+
Portable Pixel Map
-
+
X Bitmap Format
-
+
X Pixel Map
-
+
-
-
+
+
Save Drawing As
-
+
-
+
%1 already exists.
Do you want to replace it?
-
+
-
+
Drawing Exchange %1
-
+
-
+
QCad 1.x file %1
-
+
-
+
Font %1
-
+
-
+
Open Drawing
-
+
@@ -5581,7 +5602,7 @@ Do you want to replace it?
&Add Block
-
+
@@ -5589,7 +5610,7 @@ Do you want to replace it?
&Rename Block
-
+
@@ -5597,17 +5618,17 @@ Do you want to replace it?
&Create Block
-
+
Specify reference point
-
+
Cancel
-
+
@@ -5615,7 +5636,7 @@ Do you want to replace it?
&Edit Block
-
+
@@ -5623,7 +5644,7 @@ Do you want to replace it?
&Explode
-
+
@@ -5631,12 +5652,12 @@ Do you want to replace it?
&Freeze all
-
+
&Defreeze all
-
+
@@ -5644,7 +5665,7 @@ Do you want to replace it?
&Insert Block
-
+
@@ -5654,47 +5675,47 @@ Do you want to replace it?
Not a valid expression
-
+
Specify reference point
-
+
Cancel
-
+
Enter angle:
-
+
Enter factor:
-
+
Enter columns:
-
+
Enter rows:
-
+
Enter column spacing:
-
+
Enter row spacing:
-
+
@@ -5702,7 +5723,7 @@ Do you want to replace it?
&Remove Block
-
+
@@ -5710,7 +5731,7 @@ Do you want to replace it?
Toggle Block Visibility
-
+
@@ -5718,12 +5739,12 @@ Do you want to replace it?
Choose second edge
-
+
Back
-
+
@@ -5731,38 +5752,38 @@ Do you want to replace it?
&Aligned
-
+
Specify first extension line origin
-
+
Cancel
-
+
Specify second extension line origin
-
+
Back
-
+
Specify dimension line location
-
+
Enter dimension text:
-
+
@@ -5770,34 +5791,34 @@ Do you want to replace it?
&Angular
-
+
Select first line
-
+
Cancel
-
+
Select second line
-
+
Specify dimension arc line location
-
+
Enter dimension text:
-
+
@@ -5805,38 +5826,38 @@ Do you want to replace it?
&Diametric
-
+
Not a circle or arc entity
-
+
Not a valid expression
-
+
Select arc or circle entity
-
+
Cancel
-
+
Specify dimension line location
-
+
Enter dimension text:
-
+
@@ -5844,27 +5865,27 @@ Do you want to replace it?
&Leader
-
+
Specify target point
-
+
Cancel
-
+
Specify next point
-
+
Finish
-
+
@@ -5872,58 +5893,58 @@ Do you want to replace it?
&Linear
-
+
&Horizontal
-
+
&Vertical
-
+
Not a valid expression
-
+
Specify first extension line origin
-
+
Cancel
-
+
Specify second extension line origin
-
+
Back
-
+
Specify dimension line location
-
+
Enter dimension text:
-
+
Enter dimension line angle:
-
+
@@ -5931,38 +5952,38 @@ Do you want to replace it?
&Radial
-
+
Not a circle or arc entity
-
+
Not a valid expression
-
+
Select arc or circle entity
-
+
Cancel
-
+
Specify dimension line position or enter angle:
-
+
Enter dimension text:
-
+
@@ -5970,7 +5991,7 @@ Do you want to replace it?
&Center, Point, Angles
-
+
@@ -5979,27 +6000,27 @@ Do you want to replace it?
Not a valid expression
-
+
Not a valid chord length
-
+
Specify center
-
+
Cancel
-
+
Specify radius
-
+
@@ -6008,27 +6029,27 @@ Do you want to replace it?
Back
-
+
Specify start angle:
-
+
Specify end angle or [Angle/chord Length]
-
+
Specify included angle:
-
+
Specify chord length:
-
+
@@ -6036,38 +6057,38 @@ Do you want to replace it?
&3 Points
-
+
Invalid arc data.
-
+
Specify startpoint or [Center]
-
+
Cancel
-
+
Specify second point
-
+
Back
-
+
Specify endpoint
-
+
@@ -6075,27 +6096,27 @@ Do you want to replace it?
Arc: Tangential
-
+
Specify base entity
-
+
Cancel
-
+
Specify end angle
-
+
Back
-
+
@@ -6103,32 +6124,32 @@ Do you want to replace it?
Center, &Point
-
+
Not a valid expression
-
+
Specify center
-
+
Cancel
-
+
Specify radius
-
+
Back
-
+
@@ -6136,32 +6157,32 @@ Do you want to replace it?
2 Points
-
+
Invalid Circle data.
-
+
Specify first point
-
+
Cancel
-
+
Specify second point
-
+
Back
-
+
@@ -6169,38 +6190,38 @@ Do you want to replace it?
3 Points
-
+
Invalid circle data.
-
+
Specify first point
-
+
Cancel
-
+
Specify second point
-
+
Back
-
+
Specify third point
-
+
@@ -6208,32 +6229,32 @@ Do you want to replace it?
Center, &Radius
-
+
Not a valid expression
-
+
Specify circle center
-
+
Cancel
-
+
Specify circle radius
-
+
Back
-
+
@@ -6241,34 +6262,34 @@ Do you want to replace it?
&Ellipse Arc (Axis)
-
+
&Ellipse (Axis)
-
+
Not a valid expression
-
+
Specify ellipse center
-
+
Cancel
-
+
Specify endpoint of major axis
-
+
@@ -6276,22 +6297,22 @@ Do you want to replace it?
Back
-
+
Specify endpoint or length of minor axis:
-
+
Specify start angle
-
+
Specify end angle
-
+
@@ -6299,17 +6320,17 @@ Do you want to replace it?
&Hatch
-
+
Hatch created successfully.
-
+
Invalid hatch area. Please check that the entities chosen form one or more closed contours.
-
+
@@ -6317,33 +6338,33 @@ Do you want to replace it?
&Image
-
+
Not a valid expression
-
+
Specify reference point
-
+
Cancel
-
+
Enter angle:
-
+
Enter factor:
-
+
@@ -6351,43 +6372,43 @@ Do you want to replace it?
&2 Points
-
+
Specify first point
-
+
Cancel
-
+
Specify next point or [%1]
-
+
Back
-
+
Specify next point
-
+
Cannot close sequence of lines: Not enough entities defined yet.
-
+
Cannot undo: Not enough entities defined yet.
-
+
@@ -6395,49 +6416,49 @@ Do you want to replace it?
&Angle
-
+
&Horizontal
-
+
Vertical
-
+
Not a valid expression
-
+
Specify position
-
+
Cancel
-
+
Enter angle:
-
+
Back
-
+
Enter length:
-
+
@@ -6445,45 +6466,45 @@ Do you want to replace it?
Bisector
-
+
Not a valid expression
-
+
Select first line
-
+
Cancel
-
+
Select second line
-
+
Back
-
+
Enter bisector length:
-
+
Enter number of bisectors:
-
+
@@ -6491,17 +6512,17 @@ Do you want to replace it?
&Freehand Line
-
+
Click and drag to draw a line
-
+
Cancel
-
+
@@ -6509,27 +6530,27 @@ Do you want to replace it?
Vertical
-
+
Specify first point
-
+
Cancel
-
+
Specify second point
-
+
Back
-
+
@@ -6537,39 +6558,39 @@ Do you want to replace it?
Parallel
-
+
Concentric
-
+
Specify Distance <%1> or select entity or [%2]
-
+
Cancel
-
+
Enter number:
-
+
Not a valid expression
-
+
Not a valid number. Try 1..99
-
+
@@ -6577,43 +6598,43 @@ Do you want to replace it?
Parallel through point
-
+
Select entity
-
+
Cancel
-
+
Specify through point
-
+
Back
-
+
Number:
-
+
Not a valid number. Try 1..99
-
+
Not a valid expression
-
+
@@ -6621,32 +6642,32 @@ Do you want to replace it?
Pol&ygon (Cen,Cor)
-
+
Specify center
-
+
Specify a corner
-
+
Enter number:
-
+
Not a valid number. Try 1..9999
-
+
Not a valid expression
-
+
@@ -6654,43 +6675,43 @@ Do you want to replace it?
Polygo&n (Cor,Cor)
-
+
Specify first corner
-
+
Cancel
-
+
Specify second corner
-
+
Back
-
+
Number:
-
+
Not a valid number. Try 1..9999
-
+
Not a valid expression.
-
+
@@ -6698,27 +6719,27 @@ Do you want to replace it?
Rectangle
-
+
Specify first corner
-
+
Cancel
-
+
Specify second corner
-
+
Back
-
+
@@ -6726,38 +6747,38 @@ Do you want to replace it?
Relative angle
-
+
Orthogonal
-
+
Not a valid expression
-
+
Select base entity
-
+
Cancel
-
+
Specify position
-
+
Back
-
+
@@ -6765,27 +6786,27 @@ Do you want to replace it?
Tangent (P,C)
-
+
Specify point
-
+
Cancel
-
+
Select circle, arc or ellipse
-
+
Back
-
+
@@ -6793,27 +6814,27 @@ Do you want to replace it?
Tangent (C,C)
-
+
Select first circle or arc
-
+
Cancel
-
+
Select second circle or arc
-
+
Back
-
+
@@ -6821,17 +6842,17 @@ Do you want to replace it?
&Points
-
+
Specify location
-
+
Cancel
-
+
@@ -6839,53 +6860,53 @@ Do you want to replace it?
&Polyline
-
+
Draw polylines
-
+
Specify first point
-
+
Cancel
-
+
Specify next point or [%1]
-
+
Back
-
+
Specify next point
-
+
Cannot close sequence of lines: Not enough entities defined yet.
-
+
Undo disallowed due a fatal bug somewhere. Sorry.
-
+
Cannot undo: Not enough entities defined yet.
-
+
@@ -6893,38 +6914,38 @@ Do you want to replace it?
&Spline
-
+
Specify first control point
-
+
Cancel
-
+
Specify next control point or [%1]
-
+
Back
-
+
Specify next control point
-
+
Cannot undo: Not enough entities defined yet.
-
+
@@ -6932,113 +6953,113 @@ Do you want to replace it?
&Text
-
+
Specify insertion point
-
+
Cancel
-
+
Enter text:
-
+
Back
-
+
RS_ActionEditCopy
-
+
&Copy
-
+
-
+
Cu&t
-
+
-
+
Specify reference point
-
+
-
+
Cancel
-
+
RS_ActionEditPaste
-
+
&Paste
-
+
-
+
Set reference point
-
+
-
+
Cancel
-
+
RS_ActionEditUndo
-
+
&Undo
-
+
-
+
&Redo
-
+
RS_ActionFileNew
-
+
&New...
-
+
RS_ActionFileOpen
-
+
&Open...
-
+
RS_ActionFileSave
-
+
&Save
-
+
RS_ActionFileSaveAs
-
+
Save &as...
-
+
@@ -7046,37 +7067,37 @@ Do you want to replace it?
Angle between two lines
-
+
Angle: %1%2
-
+
Lines are parallel
-
+
Specify first line
-
+
Cancel
-
+
Specify second line
-
+
Back
-
+
@@ -7084,43 +7105,43 @@ Do you want to replace it?
Polygonal Area
-
+
Area: %1
-
+
Circumference: %1
-
+
Point: %1/%2
-
+
Specify first point of polygon
-
+
Cancel
-
+
Specify next point of polygon
-
+
Terminate
-
+
@@ -7128,32 +7149,32 @@ Do you want to replace it?
&Distance Point to Point
-
+
Distance: %1
-
+
Specify first point of distance
-
+
Cancel
-
+
Specify second point of distance
-
+
Back
-
+
@@ -7161,32 +7182,32 @@ Do you want to replace it?
&Distance Entity to Point
-
+
Distance: %1
-
+
Specify entity
-
+
Cancel
-
+
Specify point
-
+
Back
-
+
@@ -7194,27 +7215,27 @@ Do you want to replace it?
Point inside contour
-
+
Point is inside selected contour.
-
+
Point is outside selected contour.
-
+
Specify point
-
+
Cancel
-
+
@@ -7222,17 +7243,17 @@ Do you want to replace it?
&Total length of selected entities
-
+
Total Length of selected entities: %1
-
+
At least one of the selected entities cannot be measured.
-
+
@@ -7240,7 +7261,7 @@ Do you want to replace it?
Add Layer
-
+
@@ -7248,7 +7269,7 @@ Do you want to replace it?
&Edit Layer
-
+
@@ -7256,12 +7277,12 @@ Do you want to replace it?
&Freeze all
-
+
&Defreeze all
-
+
@@ -7269,7 +7290,7 @@ Do you want to replace it?
Remove Layer
-
+
@@ -7277,7 +7298,7 @@ Do you want to replace it?
Toggle Layer Lock
-
+
@@ -7285,7 +7306,7 @@ Do you want to replace it?
&Toggle Layer
-
+
@@ -7293,38 +7314,38 @@ Do you want to replace it?
Insert Library Object
-
+
- Cannot open file '%1'
-
+ Cannot open file '%1'
+
Not a valid expression
-
+
Specify reference point
-
+
Cancel
-
+
Enter angle:
-
+
Enter factor:
-
+
@@ -7332,7 +7353,7 @@ Do you want to replace it?
(Un-)&Lock Relative Zero
-
+
@@ -7340,7 +7361,7 @@ Do you want to replace it?
&Attributes
-
+
@@ -7348,45 +7369,45 @@ Do you want to replace it?
&Bevel
-
+
Not a valid expression
-
+
Select first entity
-
+
Cancel
-
+
Select second entity
-
+
Back
-
+
Enter length 1:
-
+
Enter length 2:
-
+
@@ -7394,48 +7415,48 @@ Do you want to replace it?
&Divide
-
+
No Entity found.
-
+
Entity must be a line, arc, circle or ellipse.
-
+
Cutting point is invalid.
-
+
Cutting point is not on entity.
-
+
Specify entity to cut
-
+
Cancel
-
+
Specify cutting point
-
+
Back
-
+
@@ -7443,7 +7464,7 @@ Do you want to replace it?
&Delete
-
+
@@ -7451,67 +7472,67 @@ Do you want to replace it?
Delete Freehand
-
+
Entities not in the same polyline.
-
+
Parent of second entity is not a polyline
-
+
Parent of second entity is NULL
-
+
One of the chosen entities is NULL
-
+
Parent of first entity is not a polyline
-
+
Parent of first entity is NULL
-
+
First entity is NULL
-
+
Second entity is NULL
-
+
Specify first break point on a polyline
-
+
Cancel
-
+
Specify second break point on the same polyline
-
+
Back
-
+
@@ -7519,17 +7540,17 @@ Do you want to replace it?
&Delete selected
-
+
Pick entity to delete
-
+
Cancel
-
+
@@ -7537,7 +7558,7 @@ Do you want to replace it?
&Properties
-
+
@@ -7545,7 +7566,7 @@ Do you want to replace it?
&Explode Text into Letters
-
+
@@ -7553,27 +7574,27 @@ Do you want to replace it?
&Mirror
-
+
Specify first point of mirror line
-
+
Cancel
-
+
Specify second point of mirror line
-
+
Back
-
+
@@ -7581,27 +7602,27 @@ Do you want to replace it?
&Move / Copy
-
+
Specify reference point
-
+
Cancel
-
+
Specify target point
-
+
Back
-
+
@@ -7609,38 +7630,38 @@ Do you want to replace it?
M&ove and Rotate
-
+
Not a valid expression
-
+
Specify reference point
-
+
Cancel
-
+
Specify target point
-
+
Back
-
+
Enter rotation angle:
-
+
@@ -7648,17 +7669,17 @@ Do you want to replace it?
&Rotate
-
+
Specify reference point
-
+
Back
-
+
@@ -7666,27 +7687,27 @@ Do you want to replace it?
Rotate T&wo
-
+
Specify absolute reference point
-
+
Cancel
-
+
Specify relative reference point
-
+
Back
-
+
@@ -7694,38 +7715,38 @@ Do you want to replace it?
&Round
-
+
Not a valid expression
-
+
Specify first entity
-
+
Back
-
+
Specify second entity
-
+
Enter radius:
-
+
Cancel
-
+
@@ -7733,17 +7754,17 @@ Do you want to replace it?
&Scale
-
+
Specify reference point
-
+
Cancel
-
+
@@ -7751,39 +7772,39 @@ Do you want to replace it?
&Stretch
-
+
Specify first corner
-
+
Cancel
-
+
Specify second corner
-
+
Back
-
+
Specify reference point
-
+
Specify target point
-
+
@@ -7791,44 +7812,44 @@ Do you want to replace it?
&Trim
-
+
&Trim Two
-
+
Select first trim entity
-
+
Cancel
-
+
Select limiting entity
-
+
Back
-
+
Select second trim entity
-
+
Select entity to trim
-
+
@@ -7836,37 +7857,37 @@ Do you want to replace it?
&Lengthen
-
+
No entity found.
-
+
The chosen Entity is in a block. Please edit the block.
-
+
The chosen Entity is not an atomic entity or cannot be trimmed.
-
+
Not a valid expression
-
+
Select entity to trim or enter distance:
-
+
Back
-
+
@@ -7874,7 +7895,7 @@ Do you want to replace it?
Current &Drawing Preferences
-
+
@@ -7882,53 +7903,53 @@ Do you want to replace it?
&Add node
-
+
- Add polyline's node
-
+ Add polyline's node
+
No Entity found.
-
+
Entity must be a polyline.
-
+
Adding point is invalid.
-
+
Adding point is not on entity.
-
+
Specify polyline to add nodes
-
+
Cancel
-
+
- Specify adding node's point
-
+ Specify adding node's point
+
Back
-
+
@@ -7936,53 +7957,53 @@ Do you want to replace it?
A&ppend node
-
+
- Append polyline's node
-
+ Append polyline's node
+
No Entity found.
-
+
Entity must be a polyline.
-
+
Click somewhere near the beginning or end of existing polyline.
-
+
Specify the polyline somewhere near the beginning or end point
-
+
Cancel
-
+
Specify next point or [%1]
-
+
Back
-
+
Specify next point
-
+
@@ -7990,53 +8011,53 @@ Do you want to replace it?
&Delete node
-
+
- Delete polyline's node
-
+ Delete polyline's node
+
No Entity found.
-
+
Entity must be a polyline.
-
+
Adding point is invalid.
-
+
Adding point is not on entity.
-
+
Specify polyline to delete node
-
+
Cancel
-
+
- Specify deleting node's point
-
+ Specify deleting node's point
+
Back
-
+
@@ -8044,66 +8065,66 @@ Do you want to replace it?
Delete &between two nodes
-
+
Delete between two nodes
-
+
No Entity found.
-
+
Entity must be a polyline.
-
+
Deletinging point is invalid.
-
+
Deleting point is not on entity.
-
+
Deleteinging point is not on entity.
-
+
Specify polyline to delete between two nodes
-
+
Cancel
-
+
Specify first node
-
+
Back
-
+
Specify second node
-
+
@@ -8111,32 +8132,32 @@ Do you want to replace it?
Create &Equidistant Polylines
-
+
Create Equidistant Polylines
-
+
No Entity found.
-
+
Entity must be a polyline.
-
+
Choose the original polyline
-
+
Cancel
-
+
@@ -8144,32 +8165,32 @@ Do you want to replace it?
Create Polyline from Existing &Segments
-
+
Create Polyline from Existing Segments
-
+
No Entity found.
-
+
Entity must be a line or arc.
-
+
Choose one of the segments on the original polyline
-
+
Cancel
-
+
@@ -8177,70 +8198,70 @@ Do you want to replace it?
&Trim segments
-
+
- Trim polyline's segments
-
+ Trim polyline's segments
+
No Entity found.
-
+
Entity must be a polyline.
-
+
Specifying point is invalid.
-
+
No Segment found on entity.
-
+
Specify polyline to trim
-
+
Cancel
-
+
Specify first segment
-
+
Back
-
+
Specify second segment
-
+
RS_ActionPrintPreview
-
+
Print Pre&view
-
+
@@ -8248,17 +8269,17 @@ Do you want to replace it?
Select &All
-
+
Deselect &all
-
+
Ctrl+K
-
+
@@ -8266,12 +8287,12 @@ Do you want to replace it?
(De-)Select &Contour
-
+
Entity must be an Atomic Entity.
-
+
@@ -8279,32 +8300,32 @@ Do you want to replace it?
Select Intersected Entities
-
+
Deselect Intersected Entities
-
+
Choose first point of intersection line
-
+
Cancel
-
+
Choose second point of intersection line
-
+
Back
-
+
@@ -8312,7 +8333,7 @@ Do you want to replace it?
Invert Selection
-
+
@@ -8320,7 +8341,7 @@ Do you want to replace it?
(De-)Select Layer
-
+
@@ -8328,7 +8349,7 @@ Do you want to replace it?
Select Entity
-
+
@@ -8336,32 +8357,32 @@ Do you want to replace it?
Select Window
-
+
Deselect Window
-
+
Choose first edge
-
+
Cancel
-
+
Choose second edge
-
+
Back
-
+
@@ -8369,17 +8390,17 @@ Do you want to replace it?
Set Relative Zero
-
+
Set relative Zero
-
+
Cancel
-
+
@@ -8387,23 +8408,23 @@ Do you want to replace it?
I&ntersection Manually
-
+
Select first entity
-
+
Back
-
+
Select second entity
-
+
@@ -8411,90 +8432,90 @@ Do you want to replace it?
Regenerate Dimension Entities
-
+
Regenerated %1 dimension entities
-
+
No dimension entities found
-
+
RS_ActionZoomAuto
-
+
&Auto Zoom
-
+
RS_ActionZoomIn
-
+
Zoom &In
-
+
-
+
Zoom &Out
-
+
RS_ActionZoomPan
-
+
&Pan Zoom
-
+
RS_ActionZoomPrevious
-
+
&Previous View
-
+
RS_ActionZoomRedraw
-
+
&Redraw
-
+
RS_ActionZoomWindow
-
+
&Window Zoom
-
+
-
+
Specify first edge
-
+
-
+
Cancel
-
+
-
+
Specify second edge
-
+
-
+
Back
-
+
@@ -8502,940 +8523,940 @@ Do you want to replace it?
point
-
+
po
-
+
line
-
+
ln
-
+
l
-
+
polyline
-
+
offset
-
+
o
offset
-
+
parallel
-
+
par
parallel
-
+
arc
-
+
a
-
+
circle
-
+
ci
-
+
rectangle
-
+
rec
-
+
rectang
-
+
text
-
+
regen
-
+
rg
zoom - redraw
-
+
zr
zoom - redraw
-
+
zw
zoom - window
-
+
za
zoom - auto
-
+
zp
zoom - pan
-
+
zv
zoom - previous
-
+
kill
-
+
k
-
+
undo
-
+
u
undo
-
+
redo
-
+
r
-
+
da
dimension - aligned
-
+
da
-
+
dh
dimension - horizontal
-
+
dh
-
+
dr
dimension - linear
-
+
dr
-
+
dv
dimension - vertical
-
+
dv
-
+
ld
dimension - leader
-
+
ld
-
+
dimregen
-
+
tm
modify - multi trim (extend)
-
+
tm
-
+
xt
modify - trim (extend)
-
+
xt
-
+
rm
modify - trim
-
+
rm
-
+
mv
modify - move
-
+
mv
-
+
ch
modify - bevel (chamfer)
-
+
ch
-
+
mi
modify - mirror
-
+
mi
-
+
ro
modify - rotate
-
+
ro
-
+
sz
modify - scale
-
+
sz
-
+
ss
modify - stretch
-
+
ss
-
+
er
modify - delete (erase)
-
+
er
-
+
oo
modify - undo (oops)
-
+
oo
-
+
uu
modify - redo
-
+
uu
-
+
xp
modify - explode
-
+
xp
-
+
os
snap - none
-
+
os
-
+
sg
snap - grid
-
+
sg
-
+
se
snap - end
-
+
se
-
+
si
snap - intersection
-
+
si
-
+
sn
snap - center
-
+
sn
-
+
sm
snap - middle
-
+
sm
-
+
sn
snap - nearest
-
+
np
snap - nearest point
-
+
np
-
+
tn
Deselect all
-
+
tn
-
+
Command: %1
-
+
po
point
-
+
li
line
-
+
pa
parallel
-
+
re
rectangle
-
+
rp
regular polygon
-
+
ci
circle
-
+
c2
2 point circle
-
+
c3
3 point circle
-
+
ar
arc
-
+
a3
3 point arc
-
+
ep
ellipse
-
+
tx
text
-
+
mt
text
-
+
rd
redraw
-
+
zi
zoom - in
-
+
zo
zoom - out
-
+
fr*
layers - freeze all
-
+
th*
layers - defreeze all
-
+
ex
modify - explode
-
+
angle
-
+
close
-
+
chord length
-
+
columns
-
+
columnspacing
-
+
factor
-
+
length
-
+
length1
-
+
length2
-
+
number
-
+
radius
-
+
rows
-
+
rowspacing
-
+
through
-
+
trim
-
+
back
-
+
ang
angle
-
+
a
angle
-
+
center
-
+
cen
center
-
+
c
center
-
+
length
chord length
-
+
l
chord length
-
+
c
close
-
+
cols
columns
-
+
c
columns
-
+
columnspacing
columnspacing for inserts
-
+
colspacing
columnspacing for inserts
-
+
cs
columnspacing for inserts
-
+
fact
factor
-
+
f
factor
-
+
help
-
+
?
help
-
+
length
length
-
+
len
length
-
+
l
length
-
+
length1
length1
-
+
len1
length1
-
+
l1
length1
-
+
length2
length2
-
+
len2
length2
-
+
l2
length2
-
+
num
number
-
+
n
number
-
+
r
radius
-
+
reversed
reversed arc
-
+
rev
reversed arc
-
+
r
reversed arc
-
+
r
rows
-
+
rowspacing
rowspacing for inserts
-
+
rs
rowspacing for inserts
-
+
t
text
-
+
t
through
-
+
b
back
-
+
Available commands:
-
+
diff --git a/ts/librecad_fr.ts b/ts/librecad_fr.ts
index 7932cd59ae..841ea6758e 100644
--- a/ts/librecad_fr.ts
+++ b/ts/librecad_fr.ts
@@ -281,7 +281,7 @@ Vérifiez les permissions SVP.
Date: %1
- Date : %1
+ Date : %1
This is a %1 version which terminates
@@ -363,6 +363,26 @@ Sauvegarde automatique désactivée.
Import
Import
+
+ &Toolbars
+
+
+
+ Compiled on: %1
+
+
+
+ Program Icons Supplied by
+
+
+
+ Splash and Logo supplied by
+
+
+
+ Main Website :
+
+
QC_MDIWindow
@@ -4723,12 +4743,16 @@ Voulez-vous le remplacer ?
Loading Library Paths..
- Chargement des Chemins d'Accès aux Librairies..
+ Chargement des Chemins d'Accès aux Librairies..
Loading File %1..
Chargement du Fichier %1..
+
+ Loading...
+
+
RS_ActionBlocksAdd
diff --git a/ts/librecad_hu.ts b/ts/librecad_hu.ts
index 6838d2a6de..aa1c405632 100644
--- a/ts/librecad_hu.ts
+++ b/ts/librecad_hu.ts
@@ -1,7 +1,8 @@
+
-
+
Loading..
Betöltés..
@@ -283,8 +284,8 @@ Dátum: %1
Parancssor
- Block '%1'
- Blokk '%1'
+ Block '%1'
+ Blokk '%1'
Cannot open the file
@@ -334,7 +335,7 @@ nem menthető. Ellenőrizze a jogokat.
Date: %1
- Dátum: %1
+ Dátum: %1
This is a %1 version which terminates
@@ -359,12 +360,12 @@ Most elmentheti a munkáját.
Görbék
- Running script '%1'
-
+ Running script '%1'
+
- Inserting block '%1'
-
+ Inserting block '%1'
+
&Polyline
@@ -372,46 +373,66 @@ Most elmentheti a munkáját.
CTRL+M
-
+
Insert Image
-
+
Auto-saving drawing...
-
+
Auto-saved drawing
-
+
Cannot auto-save the file
%1
Please check the permissions.
Auto-save disabled.
-
+
SVN Revision: %1
-
+
Help
-
+
- Bugger, I couldn't find the helpfiles on the filesystem.
-
+ Bugger, I couldn't find the helpfiles on the filesystem.
+
&Plugins
-
+
Import
-
+
+
+
+ &Toolbars
+
+
+
+ Compiled on: %1
+
+
+
+ Program Icons Supplied by
+
+
+
+ Splash and Logo supplied by
+
+
+
+ Main Website :
+
@@ -422,7 +443,7 @@ Auto-save disabled.
Do you really want to close the file %1?
- Valóban be akarja zárni "%1"-t?
+ Valóban be akarja zárni "%1"-t?
Do you really want to close the file
@@ -1955,15 +1976,15 @@ Auto-save disabled.
CTRL-G
-
+
Restrict&Vertically
-
+
&back
-
+
@@ -1985,7 +2006,7 @@ Auto-save disabled.
QG_ArcTangentialOptions
Tangential Arc Options
-
+
Radius:
@@ -2038,8 +2059,8 @@ Auto-save disabled.
Blokk átnevezés
- Could not name block. A block named "%1" already exists.
- Érvénytelen elnevezés. A "%1 " név már foglalt.
+ Could not name block. A block named "%1" already exists.
+ Érvénytelen elnevezés. A "%1 " név már foglalt.
&OK
@@ -2162,7 +2183,7 @@ in a separate window
Arc tangential to base entity with radius
-
+
@@ -2371,27 +2392,27 @@ in a separate window
Eszköztár
- Show menu "Lines"
+ Show menu "Lines"
Vonalak menü
- Show menu "Arcs"
+ Show menu "Arcs"
Ívek menü
- Show menu "Circles"
+ Show menu "Circles"
Körök menü
- Show menu "Points"
+ Show menu "Points"
Pontok menü
- Show menu "Ellipses"
+ Show menu "Ellipses"
Ellipszisek menü
- Show menu "Edit"
+ Show menu "Edit"
Szerkesztés menü
@@ -2399,7 +2420,7 @@ in a separate window
Szövegek
- Show menu "Select"
+ Show menu "Select"
Kijelölés menü
@@ -2407,7 +2428,7 @@ in a separate window
Blokk létrehozás
- Show menu "Dimensions"
+ Show menu "Dimensions"
Méretezés menü
@@ -2419,12 +2440,12 @@ in a separate window
Kép beszúrása
- Show menu "Measure"
+ Show menu "Measure"
Méretellenőrzés menü
- Show menu "Splines"
- A "Görbék" menü mutatása
+ Show menu "Splines"
+ A "Görbék" menü mutatása
Points
@@ -2436,7 +2457,7 @@ in a separate window
Polylines
-
+
@@ -2549,7 +2570,7 @@ in a separate window
QG_CadToolBarPolylines
Polylines
-
+
Back to main menu
@@ -2557,27 +2578,27 @@ in a separate window
Create Polyline
-
+
Trim segments
-
+
Delete between two nodes
-
+
Delete node
-
+
Add node
-
+
Append node
-
+
@@ -2852,7 +2873,7 @@ in a separate window
...
-
+
@@ -3098,7 +3119,7 @@ in a separate window
Dimension
-
+
@@ -3222,12 +3243,12 @@ in a separate window
Üdvözöljük
- <font size="+1"><b>Welcome to QCad</b>
+ <font size="+1"><b>Welcome to QCad</b>
</font>
<br>
Please choose the unit you want to use for new drawings and your preferred language.<br>
You can changes these settings later in the Options Dialog of QCad.
- <font size="+1"><b>Üdvözli a QCad</b></font><br>
+ <font size="+1"><b>Üdvözli a QCad</b></font><br>
Válassza ki a mértékegységet és a kezelő felület nyelvét.<br>
Ezeken később is változtathat a beállítások ablakban.
@@ -3422,7 +3443,7 @@ Ezeken később is változtathat a beállítások ablakban.
...
-
+
@@ -3497,7 +3518,7 @@ Ezeken később is változtathat a beállítások ablakban.
...
-
+
@@ -3576,11 +3597,11 @@ Ezeken később is változtathat a beállítások ablakban.
...
-
+
Ctrl+S
-
+
@@ -3738,7 +3759,7 @@ Ezeken később is változtathat a beállítások ablakban.
Radián
- Surveyor's units
+ Surveyor's units
Geodéziai egységek
@@ -3746,8 +3767,8 @@ Ezeken később is változtathat a beállítások ablakban.
Beállítások
- For the length formats 'Engineering' and 'Architectural', the unit must be set to Inch.
- A 'Mérnöki' és 'Építészeti' formátumhoz Inch a mértékegység.
+ For the length formats 'Engineering' and 'Architectural', the unit must be set to Inch.
+ A 'Mérnöki' és 'Építészeti' formátumhoz Inch a mértékegység.
&Paper
@@ -4166,42 +4187,42 @@ Ezeken később is változtathat a beállítások ablakban.
Alt+U
-
+
Minimal Grid Spacing (px):
-
+
Program Defaults
-
+
Time between automatc saving of thedocument in minutes.
-
+
Auto save time:
-
+
QG_DlgOptionsVariables
Drawing Variables
-
+
Variable
-
+
Code
-
+
Value
-
+
&OK
@@ -4339,7 +4360,7 @@ Ezeken később is változtathat a beállítások ablakban.
...
-
+
@@ -4422,7 +4443,7 @@ Ezeken később is változtathat a beállítások ablakban.
...
-
+
@@ -4505,7 +4526,7 @@ Ezeken később is változtathat a beállítások ablakban.
...
-
+
@@ -5250,7 +5271,7 @@ Ezeken később is változtathat a beállítások ablakban.
again Still No Text supplied.
-
+
@@ -5864,7 +5885,7 @@ Ezeken később is változtathat a beállítások ablakban.
...
-
+
@@ -5898,11 +5919,11 @@ Ezeken később is változtathat a beállítások ablakban.
Tangential
-
+
Tan Radius
-
+
Angle
@@ -6195,12 +6216,12 @@ Ezeken később is változtathat a beállítások ablakban.
Fólia törlése
- Layer "%1" and all entities on it will be removed.
- A "%1" fólia és minden eleme törlődik.
+ Layer "%1" and all entities on it will be removed.
+ A "%1" fólia és minden eleme törlődik.
- Layer "%1" can never be removed.
- A "%1" fólia soha sem törölhető.
+ Layer "%1" can never be removed.
+ A "%1" fólia soha sem törölhető.
Layer Dialog
@@ -6211,16 +6232,16 @@ Ezeken később is változtathat a beállítások ablakban.
Blokk törlése
- Block "%1" and all its entities will be removed.
- A "%1" blokk és minden eleme törlődik.
+ Block "%1" and all its entities will be removed.
+ A "%1" blokk és minden eleme törlődik.
Layer Properties
Fólia tulajdonságai
- Layer with a name "%1" already exists. Please specify a different name.
- A "%1" nevű fólia már létezik. Válasszon másik nevet.
+ Layer with a name "%1" already exists. Please specify a different name.
+ A "%1" nevű fólia már létezik. Válasszon másik nevet.
@@ -6321,83 +6342,83 @@ Lecseréli?
Inch
-
+
Foot
-
+
Mile
-
+
Millimeter
-
+
Centimeter
-
+
Meter
-
+
Kilometer
-
+
Microinch
-
+
Mil
-
+
Yard
-
+
Angstrom
-
+
Nanometer
-
+
Micron
-
+
Decimeter
-
+
Decameter
-
+
Hectometer
-
+
Gigameter
-
+
Astro
-
+
Lightyear
-
+
Parsec
-
+
Export Image
@@ -6409,12 +6430,16 @@ Lecseréli?
Loading Library Paths..
- Könyvtárak betöltése..
+ Könyvtárak betöltése..
Loading File %1..
%1 fájl betöltése..
+
+ Loading...
+
+
RS_ActionBlocksAdd
@@ -6561,8 +6586,8 @@ Lecseréli?
Blokk be&illesztés
-
-
+
+
@@ -6954,11 +6979,11 @@ Lecseréli?
RS_ActionDrawArcTangential
Arc: Tangential
-
+
Specify base entity
-
+
Cancel
@@ -7234,8 +7259,8 @@ Lecseréli?
Kép beszúrása (Bitmap)
-
-
+
+
@@ -7574,8 +7599,8 @@ Lecseréli?
Poligon rajzolása középponttal és sarokkal
-
-
+
+
@@ -7774,7 +7799,7 @@ Lecseréli?
Select circle, arc or ellipse
-
+
@@ -7859,7 +7884,7 @@ Lecseréli?
Specify next point
-
+
Cannot close sequence of lines: Not enough entities defined yet.
@@ -7867,7 +7892,7 @@ Lecseréli?
Undo disallowed due a fatal bug somewhere. Sorry.
-
+
Cannot undo: Not enough entities defined yet.
@@ -8045,7 +8070,7 @@ Lecseréli?
&New...
-
+
@@ -8424,12 +8449,12 @@ Lecseréli?
Beilleszt egy elemet az elemkönyvtárból.
-
-
+
+
- Cannot open file '%1'
-
+ Cannot open file '%1'
+
@@ -8561,11 +8586,11 @@ Lecseréli?
&Divide
-
+
Entity must be a line, arc, circle or ellipse.
-
+
@@ -8619,35 +8644,35 @@ Lecseréli?
Entities not in the same polyline.
-
+
Parent of second entity is not a polyline
-
+
Parent of second entity is NULL
-
+
One of the chosen entities is NULL
-
+
Parent of first entity is not a polyline
-
+
Parent of first entity is NULL
-
+
First entity is NULL
-
+
Second entity is NULL
-
+
@@ -9080,11 +9105,11 @@ Lecseréli?
RS_ActionPolylineAdd
&Add node
-
+
- Add polyline's node
-
+ Add polyline's node
+
No Entity found.
@@ -9092,27 +9117,27 @@ Lecseréli?
Entity must be a polyline.
-
+
Adding point is invalid.
-
+
Adding point is not on entity.
-
+
Specify polyline to add nodes
-
+
Cancel
Mégsem
- Specify adding node's point
-
+ Specify adding node's point
+
Back
@@ -9123,11 +9148,11 @@ Lecseréli?
RS_ActionPolylineAppend
A&ppend node
-
+
- Append polyline's node
-
+ Append polyline's node
+
No Entity found.
@@ -9135,15 +9160,15 @@ Lecseréli?
Entity must be a polyline.
-
+
Click somewhere near the beginning or end of existing polyline.
-
+
Specify the polyline somewhere near the beginning or end point
-
+
Cancel
@@ -9159,18 +9184,18 @@ Lecseréli?
Specify next point
-
+
RS_ActionPolylineDel
&Delete node
-
+
- Delete polyline's node
-
+ Delete polyline's node
+
No Entity found.
@@ -9178,27 +9203,27 @@ Lecseréli?
Entity must be a polyline.
-
+
Adding point is invalid.
-
+
Adding point is not on entity.
-
+
Specify polyline to delete node
-
+
Cancel
Mégsem
- Specify deleting node's point
-
+ Specify deleting node's point
+
Back
@@ -9209,11 +9234,11 @@ Lecseréli?
RS_ActionPolylineDelBetween
Delete &between two nodes
-
+
Delete between two nodes
-
+
No Entity found.
@@ -9221,23 +9246,23 @@ Lecseréli?
Entity must be a polyline.
-
+
Deletinging point is invalid.
-
+
Deleting point is not on entity.
-
+
Deleteinging point is not on entity.
-
+
Specify polyline to delete between two nodes
-
+
Cancel
@@ -9245,7 +9270,7 @@ Lecseréli?
Specify first node
-
+
Back
@@ -9253,18 +9278,18 @@ Lecseréli?
Specify second node
-
+
RS_ActionPolylineEquidistant
Create &Equidistant Polylines
-
+
Create Equidistant Polylines
-
+
No Entity found.
@@ -9272,11 +9297,11 @@ Lecseréli?
Entity must be a polyline.
-
+
Choose the original polyline
-
+
Cancel
@@ -9287,11 +9312,11 @@ Lecseréli?
RS_ActionPolylineSegment
Create Polyline from Existing &Segments
-
+
Create Polyline from Existing Segments
-
+
No Entity found.
@@ -9299,11 +9324,11 @@ Lecseréli?
Entity must be a line or arc.
-
+
Choose one of the segments on the original polyline
-
+
Cancel
@@ -9314,11 +9339,11 @@ Lecseréli?
RS_ActionPolylineTrim
&Trim segments
-
+
- Trim polyline's segments
-
+ Trim polyline's segments
+
No Entity found.
@@ -9326,19 +9351,19 @@ Lecseréli?
Entity must be a polyline.
-
+
Specifying point is invalid.
-
+
No Segment found on entity.
-
+
Specify polyline to trim
-
+
Cancel
@@ -9346,7 +9371,7 @@ Lecseréli?
Specify first segment
-
+
Back
@@ -9354,7 +9379,7 @@ Lecseréli?
Specify second segment
-
+
@@ -9400,7 +9425,7 @@ Lecseréli?
Ctrl+K
-
+
@@ -10406,7 +10431,7 @@ Lecseréli?
polyline
-
+
pa
@@ -10416,7 +10441,7 @@ Lecseréli?
tm
modify - multi trim (extend)
-
+
da
@@ -10440,7 +10465,7 @@ Lecseréli?
tm
-
+
xt
@@ -10508,7 +10533,7 @@ Lecseréli?
sn
-
+
sm
@@ -10524,20 +10549,20 @@ Lecseréli?
kill
-
+
k
-
+
back
-
+
b
back
-
+
diff --git a/ts/librecad_id_ID.ts b/ts/librecad_id_ID.ts
index d957fd32c6..2187ba3156 100644
--- a/ts/librecad_id_ID.ts
+++ b/ts/librecad_id_ID.ts
@@ -1,371 +1,396 @@
+
QC_ApplicationWindow
-
+
&Plugins
-
+
-
- Running script '%1'
- Menjalankan skrip %1'
+
+ Running script '%1'
+ Menjalankan skrip %1'
-
- Inserting block '%1'
-
+
+ Inserting block '%1'
+
-
+
&File
&Berkas
-
+
Import
Impor
-
+
&Edit
&Sunting
-
+
&View
-
+
-
+
+ &Toolbars
+
+
+
+
Focus on &Command Line
-
+
-
+
CTRL+M
CTRL+M
-
+
&Select
-
+
-
+
&Draw
&Gambar
-
+
&Point
-
+
-
+
&Line
&Garis
-
+
&Arc
-
+
-
+
&Circle
&Lingkaran
-
+
&Ellipse
&Lonjong
-
+
&Spline
-
+
-
+
&Polyline
-
+
-
-
+
+
&Dimension
-
+
-
+
&Modify
-
+
-
+
&Snap
-
+
-
+
&Info
-
+
-
+
&Layer
-
+
-
+
&Block
-
+
-
+
&Scripts
&Skrip
-
+
&CAM
-
+
-
+
About
Tentang
-
+
&Manual
&Panduan
-
+
Insert Image
Masukkan Gambar
-
+
&Window
-
+
-
+
&Help
&Bantuan
-
+
De&bugging
-
+
-
+
Layer List
-
+
-
+
Block List
-
+
-
+
Library Browser
-
+
-
+
Command line
-
+
-
+
&Cascade
-
+
-
+
&Tile
-
+
-
+
Tile &Horizontally
-
+
-
+
Creating new file...
Membuat berkas baru...
-
- Block '%1'
-
+
+ Block '%1'
+
-
+
unnamed document %1
dokumen tak-bernama %1
-
+
New Drawing created.
-
+
-
+
Opening recent file...
-
+
-
+
Cannot open the file
%1
Please check the permissions.
-
+
-
+
Loaded document:
-
+
-
+
Opening aborted
-
+
-
+
Saving drawing...
-
+
-
-
+
+
Saved drawing: %1
-
+
-
-
+
+
Cannot save the file
%1
Please check the permissions.
-
+
-
+
Saving drawing under new filename...
-
+
-
+
Auto-saving drawing...
-
+
-
+
Auto-saved drawing
-
+
-
+
Cannot auto-save the file
%1
Please check the permissions.
Auto-save disabled.
-
+
-
+
Exporting drawing...
-
+
-
+
Exported: %1
-
+
-
+
Exporting...
-
+
-
+
Export complete
Mengekspor selesai
-
+
Export failed!
Mengekspor gagal!
-
+
Printing...
Mencetak...
-
+
Printing complete
Mencetak selesai
-
+
Print preview for %1
-
+
-
+
Exiting application...
Menutup aplikasi...
-
+
None
-
+
-
+
About...
Tentang...
-
+
Version: %1 %2
Versi: %1 %2
-
+
SVN Revision: %1
-
+
+
+
+
+ Compiled on: %1
+
+
+
+
+ Program Icons Supplied by
+
+
+
+
+ Splash and Logo supplied by
+
-
Date: %1
- Tanggal: %1
+ Tanggal: %1
-
+
Modules: %1
Modul: %1
-
+
+ Main Website :
+
+
+
+
Help
Bantuan
-
- Bugger, I couldn't find the helpfiles on the filesystem.
-
+
+ Bugger, I couldn't find the helpfiles on the filesystem.
+
@@ -373,140 +398,140 @@ Auto-save disabled.
Do you really want to close the drawing?
-
+
Do you really want to close the file
%1?
-
+
Closing Drawing
-
+
QG_ActionFactory
-
+
&Export...
&Ekspor...
-
+
&Close
&Tutup
-
+
&Print...
&Cetak...
-
+
&Quit
&Tutup
-
-
+
+
&Grid
&Kisi-kisi
-
+
CTRL-G
CTRL-G
-
+
&Draft
-
+
-
+
&Statusbar
-
+
-
+
&back
-
+
-
+
&Free
-
+
-
+
&Endpoints
-
+
-
+
&On Entity
-
+
-
+
&Center
&Pusat
-
+
&Middle
&Tengah
-
+
&Distance from Endpoint
-
+
-
+
&Intersection
&Persilangan
-
+
Restrict &Nothing
-
+
-
+
Restrict &Orthogonally
-
+
-
+
Restrict &Horizontally
-
+
-
+
Restrict&Vertically
-
+
-
+
&Preferences
-
+
-
+
&Application Preferences
-
+
-
+
Open IDE
-
+
-
+
Run Script..
Jalankan Skrip..
@@ -516,7 +541,7 @@ Auto-save disabled.
Arc Options
-
+
@@ -534,12 +559,12 @@ Auto-save disabled.
Tangential Arc Options
-
+
Radius:
-
+
@@ -547,27 +572,27 @@ Auto-save disabled.
Bevel Options
-
+
Trim
-
+
Check to trim both entities to the bevel
-
+
Length 1:
-
+
Length 2:
-
+
@@ -575,12 +600,12 @@ Auto-save disabled.
Block Settings
-
+
Block Name:
-
+
@@ -600,106 +625,106 @@ Auto-save disabled.
Esc
-
+
Renaming Block
-
+
- Could not name block. A block named "%1" already exists.
-
+ Could not name block. A block named "%1" already exists.
+
QG_BlockWidget
-
+
Show all blocks
-
+
-
+
Hide all blocks
-
+
-
+
Add a block
-
+
-
+
Remove the active block
-
+
-
+
Rename the active block
-
+
-
+
Edit the active block
in a separate window
-
+
-
+
Insert the active block
-
+
-
+
Block Menu
-
+
-
+
&Defreeze all Blocks
-
+
-
+
&Freeze all Blocks
-
+
-
+
&Add Block
-
+
-
+
&Remove Block
-
+
-
+
&Rename Block
-
+
-
+
&Edit Block
-
+
-
+
&Insert Block
-
+
-
+
&Toggle Visibility
-
+
-
+
&Create New Block
-
+
@@ -707,7 +732,7 @@ in a separate window
CAD Tools
-
+
@@ -715,7 +740,7 @@ in a separate window
Arcs
-
+
@@ -730,17 +755,17 @@ in a separate window
Arc with Center, Point, Angles
-
+
Arc with three points
-
+
Arc tangential to base entity with radius
-
+
@@ -753,22 +778,22 @@ in a separate window
Circle with two opposite points
-
+
Circle with center and radius
-
+
Circle with center and point
-
+
Circle with three points
-
+
@@ -786,7 +811,7 @@ in a separate window
Dimensions
-
+
@@ -796,42 +821,42 @@ in a separate window
Aligned Dimension
-
+
Linear Dimension
-
+
Horizontal Dimension
-
+
Vertical Dimension
-
+
Radial Dimension
-
+
Diametric Dimension
-
+
Angular Dimension
-
+
Leader
-
+
@@ -844,12 +869,12 @@ in a separate window
Ellipse arc with center, two points and angles
-
+
Ellipse with Center and two points
-
+
@@ -872,7 +897,7 @@ in a separate window
Distance (Entity, Point)
-
+
@@ -887,12 +912,12 @@ in a separate window
Total length of selected entities
-
+
Area of polygon
-
+
@@ -915,7 +940,7 @@ in a separate window
Line with given angle
-
+
@@ -935,27 +960,27 @@ in a separate window
Bisectors
-
+
Parallels with distance
-
+
Tangents from point to circle
-
+
Tangents from circle to circle
-
+
Orthogonal lines
-
+
@@ -965,22 +990,22 @@ in a separate window
Polygons with Center and Corner
-
+
Polygons with two Corners
-
+
Freehand lines
-
+
Parallels through point
-
+
@@ -988,17 +1013,17 @@ in a separate window
Main
-
+
- Show menu "Lines"
- Tampilkan menu "Garis"
+ Show menu "Lines"
+ Tampilkan menu "Garis"
- Show menu "Arcs"
-
+ Show menu "Arcs"
+
@@ -1008,17 +1033,17 @@ in a separate window
Splines
-
+
- Show menu "Ellipses"
- Tampilkan menu "Lonjong"
+ Show menu "Ellipses"
+ Tampilkan menu "Lonjong"
- Show menu "Circles"
- Tampilkan menu "Lingkaran"
+ Show menu "Circles"
+ Tampilkan menu "Lingkaran"
@@ -1027,43 +1052,43 @@ in a separate window
- Show menu "Dimensions"
-
+ Show menu "Dimensions"
+
Hatches / Solid Fills
-
+
Raster Image
-
+
- Show menu "Edit"
- Tampilkan menu "Sunting"
+ Show menu "Edit"
+ Tampilkan menu "Sunting"
- Show menu "Measure"
-
+ Show menu "Measure"
+
Create Block
-
+
- Show menu "Select"
-
+ Show menu "Select"
+
Polylines
-
+
@@ -1071,7 +1096,7 @@ in a separate window
Modify
-
+
@@ -1081,7 +1106,7 @@ in a separate window
Stretch
-
+
@@ -1091,17 +1116,17 @@ in a separate window
Bevel
-
+
Trim by amount
-
+
Trim / Extend
-
+
@@ -1111,7 +1136,7 @@ in a separate window
Edit Entity Attributes
-
+
@@ -1131,42 +1156,42 @@ in a separate window
Move
-
+
Move and Rotate
-
+
Rotate around two centers
-
+
Trim / Extend two
-
+
Divide
-
+
Explode
-
+
Explode Text into Letters
-
+
Edit Entity Geometry
-
+
@@ -1189,7 +1214,7 @@ in a separate window
Single points
-
+
@@ -1197,7 +1222,7 @@ in a separate window
Polylines
-
+
@@ -1207,32 +1232,32 @@ in a separate window
Create Polyline
-
+
Trim segments
-
+
Delete between two nodes
-
+
Delete node
-
+
Add node
-
+
Append node
-
+
@@ -1255,17 +1280,17 @@ in a separate window
Select intersected entities
-
+
Deselect intersected entities
-
+
Deselect all
-
+
@@ -1275,32 +1300,32 @@ in a separate window
Select layer
-
+
(De-)Select contour
-
+
(De-)Select entity
-
+
Deselect Window
-
+
Select Window
-
+
Continue action
-
+
@@ -1308,7 +1333,7 @@ in a separate window
Snap
-
+
@@ -1318,77 +1343,77 @@ in a separate window
Snap to grid
-
+
Free positioning
-
+
Snap to Endpoints
-
+
Snap to closest point on entity
-
+
Snap to center points
-
+
Snap to middle points
-
+
Snap to point with given distance to endpoint
-
+
Snap to intersections automatically
-
+
No Restriction
-
+
Orthogonal Restriction
-
+
Horizontal Restriction
-
+
Vertical Restriction
-
+
Move relative Zero
-
+
Lock relative Zero
-
+
Snap to intersections manually
-
+
@@ -1396,7 +1421,7 @@ in a separate window
Splines
-
+
@@ -1406,7 +1431,7 @@ in a separate window
Spline
-
+
@@ -1414,7 +1439,7 @@ in a separate window
Circle Options
-
+
@@ -1427,18 +1452,18 @@ in a separate window
Unchanged
-
+
By Layer
-
+
By Block
-
+
@@ -1458,7 +1483,7 @@ in a separate window
Cyan
-
+
@@ -1468,7 +1493,7 @@ in a separate window
Magenta
-
+
@@ -1496,13 +1521,13 @@ in a separate window
Command Line
-
+
Command:
-
+
@@ -1522,7 +1547,7 @@ in a separate window
Linear Dimension Options
-
+
@@ -1535,12 +1560,12 @@ in a separate window
Dimension Options
-
+
Label:
-
+
@@ -1584,22 +1609,22 @@ in a separate window
Dimension Label Editor
-
+
Dimension Label:
-
+
Label:
-
+
Insert:
-
+
@@ -1614,7 +1639,7 @@ in a separate window
± (Plus / Minus)
-
+
@@ -1637,12 +1662,12 @@ in a separate window
Arc
-
+
Layer:
-
+
@@ -1667,17 +1692,17 @@ in a separate window
Start Angle:
-
+
End Angle:
-
+
Reversed
-
+
@@ -1697,7 +1722,7 @@ in a separate window
Esc
-
+
@@ -1710,7 +1735,7 @@ in a separate window
Layer:
-
+
@@ -1730,7 +1755,7 @@ in a separate window
Esc
-
+
@@ -1743,7 +1768,7 @@ in a separate window
Layer:
-
+
@@ -1783,7 +1808,7 @@ in a separate window
Esc
-
+
@@ -1791,12 +1816,12 @@ in a separate window
Linear Dimension
-
+
Layer:
-
+
@@ -1826,7 +1851,7 @@ in a separate window
Esc
-
+
@@ -1834,12 +1859,12 @@ in a separate window
Dimension
-
+
Layer:
-
+
@@ -1859,7 +1884,7 @@ in a separate window
Esc
-
+
@@ -1872,7 +1897,7 @@ in a separate window
Layer:
-
+
@@ -1892,12 +1917,12 @@ in a separate window
End Angle:
-
+
Start Angle:
-
+
@@ -1907,17 +1932,17 @@ in a separate window
Minor:
-
+
Major:
-
+
Reversed
-
+
@@ -1937,7 +1962,7 @@ in a separate window
Esc
-
+
@@ -1945,7 +1970,7 @@ in a separate window
Choose Hatch Attributes
-
+
@@ -1965,7 +1990,7 @@ in a separate window
Solid Fill
-
+
@@ -1975,7 +2000,7 @@ in a separate window
Enable Preview
-
+
@@ -2002,17 +2027,17 @@ in a separate window
- <font size="+1"><b>Welcome to QCad</b>
+ <font size="+1"><b>Welcome to QCad</b>
</font>
<br>
Please choose the unit you want to use for new drawings and your preferred language.<br>
You can changes these settings later in the Options Dialog of QCad.
-
+
Default Unit:
-
+
@@ -2022,7 +2047,7 @@ You can changes these settings later in the Options Dialog of QCad.
Command Language:
-
+
@@ -2032,7 +2057,7 @@ You can changes these settings later in the Options Dialog of QCad.
Enter
-
+
@@ -2040,12 +2065,12 @@ You can changes these settings later in the Options Dialog of QCad.
Insert
-
+
Layer:
-
+
@@ -2055,12 +2080,12 @@ You can changes these settings later in the Options Dialog of QCad.
Insertion point (x):
-
+
Insertion point (y):
-
+
@@ -2105,7 +2130,7 @@ You can changes these settings later in the Options Dialog of QCad.
Esc
-
+
@@ -2118,7 +2143,7 @@ You can changes these settings later in the Options Dialog of QCad.
Layer:
-
+
@@ -2128,22 +2153,22 @@ You can changes these settings later in the Options Dialog of QCad.
End point (x):
-
+
End point (y):
-
+
Start point (y):
-
+
Start point (x):
-
+
@@ -2158,7 +2183,7 @@ You can changes these settings later in the Options Dialog of QCad.
Esc
-
+
@@ -2166,7 +2191,7 @@ You can changes these settings later in the Options Dialog of QCad.
Mirroring Options
-
+
@@ -2181,17 +2206,17 @@ You can changes these settings later in the Options Dialog of QCad.
&Keep Original
-
+
Use current &attributes
-
+
Use current &layer
-
+
@@ -2206,7 +2231,7 @@ You can changes these settings later in the Options Dialog of QCad.
Esc
-
+
@@ -2219,7 +2244,7 @@ You can changes these settings later in the Options Dialog of QCad.
Moving Options
-
+
@@ -2234,22 +2259,22 @@ You can changes these settings later in the Options Dialog of QCad.
&Keep Original
-
+
&Multiple Copies
-
+
Use current &attributes
-
+
Use current &layer
-
+
@@ -2269,7 +2294,7 @@ You can changes these settings later in the Options Dialog of QCad.
Esc
-
+
@@ -2282,7 +2307,7 @@ You can changes these settings later in the Options Dialog of QCad.
Move/Rotate Options
-
+
@@ -2297,7 +2322,7 @@ You can changes these settings later in the Options Dialog of QCad.
Esc
-
+
@@ -2312,17 +2337,17 @@ You can changes these settings later in the Options Dialog of QCad.
&Angle (a):
-
+
Use current &attributes
-
+
Use current &layer
-
+
@@ -2337,12 +2362,12 @@ You can changes these settings later in the Options Dialog of QCad.
&Keep Original
-
+
&Multiple Copies
-
+
@@ -2350,7 +2375,7 @@ You can changes these settings later in the Options Dialog of QCad.
Drawing Preferences
-
+
@@ -2365,22 +2390,22 @@ You can changes these settings later in the Options Dialog of QCad.
&Landscape
-
+
P&ortrait
-
+
Paper &Height:
-
+
Paper &Width:
-
+
@@ -2395,7 +2420,7 @@ You can changes these settings later in the Options Dialog of QCad.
&Main drawing unit:
-
+
@@ -2421,7 +2446,7 @@ You can changes these settings later in the Options Dialog of QCad.
linear
-
+
@@ -2441,7 +2466,7 @@ You can changes these settings later in the Options Dialog of QCad.
angular
-
+
@@ -2461,7 +2486,7 @@ You can changes these settings later in the Options Dialog of QCad.
X Spacing:
-
+
@@ -2471,7 +2496,7 @@ You can changes these settings later in the Options Dialog of QCad.
auto
-
+ otomatis
@@ -2505,17 +2530,17 @@ You can changes these settings later in the Options Dialog of QCad.
Y Spacing:
-
+
&Dimensions
-
+
Text Height:
-
+
@@ -2548,32 +2573,32 @@ You can changes these settings later in the Options Dialog of QCad.
Extension line extension:
-
+
Arrow size:
-
+
Dimension line gap:
-
+
Extension line offset:
-
+
Splines
-
+
Number of line segments per spline patch:
-
+
@@ -2618,12 +2643,12 @@ You can changes these settings later in the Options Dialog of QCad.
Esc
-
+
Scientific
-
+
@@ -2633,52 +2658,52 @@ You can changes these settings later in the Options Dialog of QCad.
Engineering
-
+
Architectural
-
+
Fractional
-
+
Decimal Degrees
-
+
Deg/min/sec
-
+
Gradians
-
+
Radians
-
+
- Surveyor's units
-
+ Surveyor's units
+
Options
-
+
- For the length formats 'Engineering' and 'Architectural', the unit must be set to Inch.
-
+ For the length formats 'Engineering' and 'Architectural', the unit must be set to Inch.
+
@@ -2686,12 +2711,12 @@ You can changes these settings later in the Options Dialog of QCad.
Application Preferences
-
+
&Appearance
-
+
@@ -2706,7 +2731,7 @@ You can changes these settings later in the Options Dialog of QCad.
&Command Language:
-
+
@@ -2754,7 +2779,7 @@ You can changes these settings later in the Options Dialog of QCad.
&Meta Grid Color:
-
+
@@ -2764,7 +2789,7 @@ You can changes these settings later in the Options Dialog of QCad.
S&elected Color:
-
+
@@ -2779,7 +2804,7 @@ You can changes these settings later in the Options Dialog of QCad.
&Highlighted Color:
-
+
@@ -2789,7 +2814,7 @@ You can changes these settings later in the Options Dialog of QCad.
Statusbar:
-
+
@@ -2843,12 +2868,12 @@ You can changes these settings later in the Options Dialog of QCad.
Graphic View
-
+
&Show large crosshairs
-
+
@@ -2858,7 +2883,7 @@ You can changes these settings later in the Options Dialog of QCad.
A&utomatically scale grid
-
+
@@ -2868,7 +2893,7 @@ You can changes these settings later in the Options Dialog of QCad.
Number of p&review entities:
-
+
@@ -2894,7 +2919,7 @@ You can changes these settings later in the Options Dialog of QCad.
Minimal Grid Spacing (px):
-
+
@@ -2914,7 +2939,7 @@ You can changes these settings later in the Options Dialog of QCad.
&Paths
-
+
@@ -2924,12 +2949,12 @@ You can changes these settings later in the Options Dialog of QCad.
Hatch Patterns:
-
+
Fonts:
-
+
@@ -2939,17 +2964,17 @@ You can changes these settings later in the Options Dialog of QCad.
Part Libraries:
-
+
&Defaults
-
+
Defaults for new drawings
-
+
@@ -2959,17 +2984,17 @@ You can changes these settings later in the Options Dialog of QCad.
Program Defaults
-
+
Time between automatc saving of thedocument in minutes.
-
+
Auto save time:
-
+
@@ -2989,12 +3014,12 @@ You can changes these settings later in the Options Dialog of QCad.
Esc
-
+
Preferences
-
+
@@ -3007,7 +3032,7 @@ You can changes these settings later in the Options Dialog of QCad.
Drawing Variables
-
+
@@ -3042,7 +3067,7 @@ You can changes these settings later in the Options Dialog of QCad.
Esc
-
+
@@ -3055,7 +3080,7 @@ You can changes these settings later in the Options Dialog of QCad.
Layer:
-
+
@@ -3085,7 +3110,7 @@ You can changes these settings later in the Options Dialog of QCad.
Esc
-
+
@@ -3093,7 +3118,7 @@ You can changes these settings later in the Options Dialog of QCad.
Rotation Options
-
+
@@ -3108,7 +3133,7 @@ You can changes these settings later in the Options Dialog of QCad.
Esc
-
+
@@ -3123,12 +3148,12 @@ You can changes these settings later in the Options Dialog of QCad.
&Keep Original
-
+
&Multiple Copies:
-
+
@@ -3138,17 +3163,17 @@ You can changes these settings later in the Options Dialog of QCad.
&Angle (a):
-
+
Use current &attributes
-
+
Use current &layer
-
+
@@ -3156,7 +3181,7 @@ You can changes these settings later in the Options Dialog of QCad.
Rotate Two Options
-
+
@@ -3181,12 +3206,12 @@ You can changes these settings later in the Options Dialog of QCad.
&Keep Original
-
+
&Multiple Copies
-
+
@@ -3196,22 +3221,22 @@ You can changes these settings later in the Options Dialog of QCad.
Angle (&a):
-
+
Angle (&b):
-
+
Use current &attributes
-
+
Use current &layer
-
+
@@ -3219,7 +3244,7 @@ You can changes these settings later in the Options Dialog of QCad.
Scaling Options
-
+
@@ -3234,7 +3259,7 @@ You can changes these settings later in the Options Dialog of QCad.
Esc
-
+
@@ -3244,17 +3269,17 @@ You can changes these settings later in the Options Dialog of QCad.
&Factor (f):
-
+
Use current &attributes
-
+
Use current &layer
-
+
@@ -3269,12 +3294,12 @@ You can changes these settings later in the Options Dialog of QCad.
&Keep Original
-
+
&Multiple Copies
-
+
@@ -3282,12 +3307,12 @@ You can changes these settings later in the Options Dialog of QCad.
Spline
-
+
Layer:
-
+
@@ -3302,7 +3327,7 @@ You can changes these settings later in the Options Dialog of QCad.
Closed
-
+
@@ -3337,7 +3362,7 @@ You can changes these settings later in the Options Dialog of QCad.
Esc
-
+
@@ -3350,22 +3375,22 @@ You can changes these settings later in the Options Dialog of QCad.
Font
-
+
&Height:
-
+
Line &spacing:
-
+
&Default line spacing
-
+
@@ -3375,7 +3400,7 @@ You can changes these settings later in the Options Dialog of QCad.
Alignment
-
+
@@ -3395,7 +3420,7 @@ You can changes these settings later in the Options Dialog of QCad.
Middle Center
-
+
@@ -3435,17 +3460,17 @@ You can changes these settings later in the Options Dialog of QCad.
Clear Text
-
+
Load Text From File
-
+
Save Text To File
-
+
@@ -3480,12 +3505,12 @@ You can changes these settings later in the Options Dialog of QCad.
Plus / Minus (±)
-
+
At (@)
-
+
@@ -3520,7 +3545,7 @@ You can changes these settings later in the Options Dialog of QCad.
Pound (£)
-
+
@@ -3540,7 +3565,7 @@ You can changes these settings later in the Options Dialog of QCad.
Insert Unicode
-
+
@@ -3550,7 +3575,7 @@ You can changes these settings later in the Options Dialog of QCad.
Char:
-
+
@@ -3560,32 +3585,32 @@ You can changes these settings later in the Options Dialog of QCad.
[0080-00FF] Latin-1 Supplementary
-
+
[0100-017F] Latin Extended-A
-
+
[0180-024F] Latin Extended-B
-
+
[0250-02AF] IPA Extensions
-
+
[02B0-02FF] Spacing Modifier Letters
-
+
[0300-036F] Combining Diacritical Marks
-
+
@@ -3595,12 +3620,12 @@ You can changes these settings later in the Options Dialog of QCad.
[0400-04FF] Cyrillic
-
+
[0500-052F] Cyrillic Supplementary
-
+
@@ -3625,7 +3650,7 @@ You can changes these settings later in the Options Dialog of QCad.
[0780-07BF] Thaana
-
+
@@ -3640,7 +3665,7 @@ You can changes these settings later in the Options Dialog of QCad.
[0A00-0A7F] Gurmukhi
-
+
@@ -3650,7 +3675,7 @@ You can changes these settings later in the Options Dialog of QCad.
[0B00-0B7F] Oriya
-
+
@@ -3675,7 +3700,7 @@ You can changes these settings later in the Options Dialog of QCad.
[0D80-0DFF] Sinhala
-
+
@@ -3705,7 +3730,7 @@ You can changes these settings later in the Options Dialog of QCad.
[1100-11FF] Hangul Jamo
-
+
@@ -3720,17 +3745,17 @@ You can changes these settings later in the Options Dialog of QCad.
[1400-167F] Unified Canadian Aboriginal Syllabic
-
+
[1680-169F] Ogham
-
+
[16A0-16FF] Runic
-
+
@@ -3740,17 +3765,17 @@ You can changes these settings later in the Options Dialog of QCad.
[1720-173F] Hanunoo
-
+
[1740-175F] Buhid
-
+
[1760-177F] Tagbanwa
-
+
@@ -3765,22 +3790,22 @@ You can changes these settings later in the Options Dialog of QCad.
[1E00-1EFF] Latin Extended Additional
-
+
[1F00-1FFF] Greek Extended
-
+
[2000-206F] General Punctuation
-
+
[2070-209F] Superscripts and Subscripts
-
+
@@ -3790,7 +3815,7 @@ You can changes these settings later in the Options Dialog of QCad.
[20D0-20FF] Combining Marks for Symbols
-
+
@@ -3800,112 +3825,112 @@ You can changes these settings later in the Options Dialog of QCad.
[2150-218F] Number Forms
-
+
[2190-21FF] Arrows
-
+
[2200-22FF] Mathematical Operators
-
+
[2300-23FF] Miscellaneous Technical
-
+
[2400-243F] Control Pictures
-
+
[2440-245F] Optical Character Recognition
-
+
[2460-24FF] Enclosed Alphanumerics
-
+
[2500-257F] Box Drawing
-
+
[2580-259F] Block Elements
-
+
[25A0-25FF] Geometric Shapes
-
+
[2600-26FF] Miscellaneous Symbols
-
+
[2700-27BF] Dingbats
-
+
[27C0-27EF] Miscellaneous Mathematical Symbols-A
-
+
[27F0-27FF] Supplemental Arrows-A
-
+
[2800-28FF] Braille Patterns
-
+
[2900-297F] Supplemental Arrows-B
-
+
[2980-29FF] Miscellaneous Mathematical Symbols-B
-
+
[2A00-2AFF] Supplemental Mathematical Operators
-
+
[2E80-2EFF] CJK Radicals Supplement
-
+
[2F00-2FDF] Kangxi Radicals
-
+
[2FF0-2FFF] Ideographic Description Characters
-
+
[3000-303F] CJK Symbols and Punctuation
-
+
@@ -3920,12 +3945,12 @@ You can changes these settings later in the Options Dialog of QCad.
[3100-312F] Bopomofo
-
+
[3130-318F] Hangul Compatibility Jamo
-
+
@@ -3935,162 +3960,162 @@ You can changes these settings later in the Options Dialog of QCad.
[31A0-31BF] Bopomofo Extended
-
+
[3200-32FF] Enclosed CJK Letters and Months
-
+
[3300-33FF] CJK Compatibility
-
+
[3400-4DBF] CJK Unified Ideographs Extension A
-
+
[4E00-9FAF] CJK Unified Ideographs
-
+
[A000-A48F] Yi Syllables
-
+
[A490-A4CF] Yi Radicals
-
+
[AC00-D7AF] Hangul Syllables
-
+
[D800-DBFF] High Surrogates
-
+
[DC00-DFFF] Low Surrogate Area
-
+
[E000-F8FF] Private Use Area
-
+
[F900-FAFF] CJK Compatibility Ideographs
-
+
[FB00-FB4F] Alphabetic Presentation Forms
-
+
[FB50-FDFF] Arabic Presentation Forms-A
-
+
[FE00-FE0F] Variation Selectors
-
+
[FE20-FE2F] Combining Half Marks
-
+
[FE30-FE4F] CJK Compatibility Forms
-
+
[FE50-FE6F] Small Form Variants
-
+
[FE70-FEFF] Arabic Presentation Forms-B
-
+
[FF00-FFEF] Halfwidth and Fullwidth Forms
-
+
[FFF0-FFFF] Specials
-
+
[10300-1032F] Old Italic
-
+
[10330-1034F] Gothic
-
+
[10400-1044F] Deseret
-
+
[1D000-1D0FF] Byzantine Musical Symbols
-
+
[1D100-1D1FF] Musical Symbols
-
+
[1D400-1D7FF] Mathematical Alphanumeric Symbols
-
+
[20000-2A6DF] CJK Unified Ideographs Extension B
-
+
[2F800-2FA1F] CJK Compatibility Ideographs Supplement
-
+
[E0000-E007F] Tags
-
+
[F0000-FFFFD] Supplementary Private Use Area-A
-
+
[100000-10FFFD] Supplementary Private Use Area-B
-
+
@@ -4105,7 +4130,7 @@ You can changes these settings later in the Options Dialog of QCad.
Esc
-
+
@@ -4138,7 +4163,7 @@ You can changes these settings later in the Options Dialog of QCad.
again Still No Text supplied.
-
+
@@ -4146,7 +4171,7 @@ You can changes these settings later in the Options Dialog of QCad.
Insert Options
-
+
@@ -4174,7 +4199,7 @@ You can changes these settings later in the Options Dialog of QCad.
Image Export Options
-
+
@@ -4184,12 +4209,12 @@ You can changes these settings later in the Options Dialog of QCad.
Width:
-
+ Panjang:
Height:
-
+
@@ -4324,7 +4349,7 @@ You can changes these settings later in the Options Dialog of QCad.
Esc
-
+
@@ -4332,7 +4357,7 @@ You can changes these settings later in the Options Dialog of QCad.
Insert Options
-
+
@@ -4357,7 +4382,7 @@ You can changes these settings later in the Options Dialog of QCad.
Array:
-
+
@@ -4390,7 +4415,7 @@ You can changes these settings later in the Options Dialog of QCad.
- Unchanged -
-
+
@@ -4398,12 +4423,12 @@ You can changes these settings later in the Options Dialog of QCad.
Layer Settings
-
+
Layer Name:
-
+
@@ -4423,12 +4448,12 @@ You can changes these settings later in the Options Dialog of QCad.
Esc
-
+
Default Pen
-
+
@@ -4436,62 +4461,62 @@ You can changes these settings later in the Options Dialog of QCad.
Show all layers
-
+
Hide all layers
-
+
Add a layer
-
+
Remove the current layer
-
+
Modify layer attributes / rename
-
+
Layer Menu
-
+
&Defreeze all Layers
-
+
&Freeze all Layers
-
+
&Add Layer
-
+
&Remove Layer
-
+
&Edit Layer
-
+
&Toggle Visibility
-
+
@@ -4499,7 +4524,7 @@ You can changes these settings later in the Options Dialog of QCad.
Library Insert Options
-
+
@@ -4527,7 +4552,7 @@ You can changes these settings later in the Options Dialog of QCad.
Library Browser
-
+
@@ -4537,7 +4562,7 @@ You can changes these settings later in the Options Dialog of QCad.
Insert
-
+
@@ -4545,7 +4570,7 @@ You can changes these settings later in the Options Dialog of QCad.
Line Angle Options
-
+
@@ -4570,22 +4595,22 @@ You can changes these settings later in the Options Dialog of QCad.
Snap Point:
-
+
Start
-
+
Middle
-
+
End
-
+
@@ -4593,7 +4618,7 @@ You can changes these settings later in the Options Dialog of QCad.
Line Bisector Options
-
+
@@ -4603,17 +4628,17 @@ You can changes these settings later in the Options Dialog of QCad.
Length of bisector
-
+
Number:
-
+
Number of bisectors to create
-
+
@@ -4621,7 +4646,7 @@ You can changes these settings later in the Options Dialog of QCad.
Line Options
-
+
@@ -4631,7 +4656,7 @@ You can changes these settings later in the Options Dialog of QCad.
Undo
-
+
@@ -4639,7 +4664,7 @@ You can changes these settings later in the Options Dialog of QCad.
Line Parallel Options
-
+
@@ -4649,17 +4674,17 @@ You can changes these settings later in the Options Dialog of QCad.
Distance to original entity
-
+
Number:
-
+
Number of parallels to create
-
+
@@ -4667,17 +4692,17 @@ You can changes these settings later in the Options Dialog of QCad.
Line Parallel Through Options
-
+
Number:
-
+
Number of parallels to create
-
+
@@ -4685,12 +4710,12 @@ You can changes these settings later in the Options Dialog of QCad.
Polygon Options
-
+
Number:
-
+
@@ -4703,12 +4728,12 @@ You can changes these settings later in the Options Dialog of QCad.
Polygon Options
-
+
Number:
-
+
@@ -4721,7 +4746,7 @@ You can changes these settings later in the Options Dialog of QCad.
Line Relative Angle Options
-
+
@@ -4731,7 +4756,7 @@ You can changes these settings later in the Options Dialog of QCad.
Line angle
-
+ Sudut garis
@@ -4749,118 +4774,118 @@ You can changes these settings later in the Options Dialog of QCad.
- Unchanged -
-
+
By Layer
-
+
By Block
-
+
No Pen
-
+
Continuous
-
+
Dot
-
+
Dot (small)
-
+
Dot (large)
-
+
Dash
-
+
Dash (small)
-
+
Dash (large)
-
+
Dash Dot
-
+
Dash Dot (small)
-
+
Dash Dot (large)
-
+
Divide
-
+
Divide (small)
-
+
Divide (large)
-
+
Center
-
+
Center (small)
-
+
Center (large)
-
+
Border
-
+
Border (small)
-
+
Border (large)
-
+
@@ -4868,7 +4893,7 @@ You can changes these settings later in the Options Dialog of QCad.
Mouse
-
+
@@ -4891,7 +4916,7 @@ You can changes these settings later in the Options Dialog of QCad.
Move Rotate Options
-
+
@@ -4904,7 +4929,7 @@ You can changes these settings later in the Options Dialog of QCad.
Polyline Options
-
+
@@ -4914,7 +4939,7 @@ You can changes these settings later in the Options Dialog of QCad.
Undo
-
+
@@ -4924,12 +4949,12 @@ You can changes these settings later in the Options Dialog of QCad.
Tangential
-
+
Tan Radius
-
+
@@ -4962,22 +4987,22 @@ You can changes these settings later in the Options Dialog of QCad.
Print Preview Options
-
+
Toggle Black / White mode
-
+
Center to page
-
+
Fit to page
-
+
@@ -4985,17 +5010,17 @@ You can changes these settings later in the Options Dialog of QCad.
Round Options
-
+
Trim
-
+
Check to trim both edges to the rounding
-
+
@@ -5008,12 +5033,12 @@ You can changes these settings later in the Options Dialog of QCad.
Selection
-
+
Selected Entities:
-
+
@@ -5026,7 +5051,7 @@ You can changes these settings later in the Options Dialog of QCad.
Snap Distance Options
-
+
@@ -5039,7 +5064,7 @@ You can changes these settings later in the Options Dialog of QCad.
Spline Options
-
+
@@ -5064,12 +5089,12 @@ You can changes these settings later in the Options Dialog of QCad.
Closed
-
+
Undo
-
+
@@ -5077,7 +5102,7 @@ You can changes these settings later in the Options Dialog of QCad.
Text Options
-
+
@@ -5095,12 +5120,12 @@ You can changes these settings later in the Options Dialog of QCad.
Trim Amount Options
-
+
Distance. Negative values for trimming, positive values for extending.
-
+
@@ -5114,7 +5139,7 @@ You can changes these settings later in the Options Dialog of QCad.
Pen
-
+
@@ -5137,23 +5162,23 @@ You can changes these settings later in the Options Dialog of QCad.
- Unchanged -
-
+
By Layer
-
+
By Block
-
+
Default
-
+
@@ -5279,10 +5304,10 @@ You can changes these settings later in the Options Dialog of QCad.
QMessageBox
-
-
-
-
+
+
+
+
Warning
Peringatan
@@ -5290,43 +5315,43 @@ You can changes these settings later in the Options Dialog of QCad.
Layer Properties
-
+
- Layer with a name "%1" already exists. Please specify a different name.
-
+ Layer with a name "%1" already exists. Please specify a different name.
+
Remove Layer
-
+
- Layer "%1" and all entities on it will be removed.
-
+ Layer "%1" and all entities on it will be removed.
+
- Layer "%1" can never be removed.
-
+ Layer "%1" can never be removed.
+
Layer Dialog
-
+
Remove Block
-
+
- Block "%1" and all its entities will be removed.
-
+ Block "%1" and all its entities will be removed.
+
@@ -5334,7 +5359,7 @@ You can changes these settings later in the Options Dialog of QCad.
None
-
+
@@ -5388,7 +5413,7 @@ You can changes these settings later in the Options Dialog of QCad.
Mil
-
+
@@ -5442,7 +5467,7 @@ You can changes these settings later in the Options Dialog of QCad.
Astro
-
+
@@ -5454,20 +5479,20 @@ You can changes these settings later in the Options Dialog of QCad.
Parsec
-
+
-
+
Loading..
Memuat..
-
- Loading Library Paths..
-
+
+ Loading...
+
-
+
Loading File %1..
Memuat Berkas %1..
@@ -5489,84 +5514,84 @@ You can changes these settings later in the Options Dialog of QCad.
Windows Bitmap
-
+
Joint Photographic Experts Group
-
+
Graphics Interchange Format
-
+
Multiple-image Network Graphics
-
+
Portable Bit Map
-
+
Portable Grey Map
-
+
Portable Network Graphic
-
+
Portable Pixel Map
-
+
X Bitmap Format
-
+
X Pixel Map
-
+
-
-
+
+
Save Drawing As
-
+
-
+
%1 already exists.
Do you want to replace it?
-
+
-
+
Drawing Exchange %1
-
+
-
+
QCad 1.x file %1
-
+
-
+
Font %1
-
+
-
+
Open Drawing
-
+
@@ -5574,7 +5599,7 @@ Do you want to replace it?
&Add Block
-
+
@@ -5582,7 +5607,7 @@ Do you want to replace it?
&Rename Block
-
+
@@ -5590,12 +5615,12 @@ Do you want to replace it?
&Create Block
-
+
Specify reference point
-
+
@@ -5608,7 +5633,7 @@ Do you want to replace it?
&Edit Block
-
+
@@ -5616,7 +5641,7 @@ Do you want to replace it?
&Explode
-
+
@@ -5624,12 +5649,12 @@ Do you want to replace it?
&Freeze all
-
+
&Defreeze all
-
+
@@ -5637,7 +5662,7 @@ Do you want to replace it?
&Insert Block
-
+
@@ -5647,12 +5672,12 @@ Do you want to replace it?
Not a valid expression
-
+
Specify reference point
-
+
@@ -5662,32 +5687,32 @@ Do you want to replace it?
Enter angle:
-
+
Enter factor:
-
+
Enter columns:
-
+
Enter rows:
-
+
Enter column spacing:
-
+
Enter row spacing:
-
+
@@ -5695,7 +5720,7 @@ Do you want to replace it?
&Remove Block
-
+
@@ -5703,7 +5728,7 @@ Do you want to replace it?
Toggle Block Visibility
-
+
@@ -5711,7 +5736,7 @@ Do you want to replace it?
Choose second edge
-
+
@@ -5724,12 +5749,12 @@ Do you want to replace it?
&Aligned
-
+
Specify first extension line origin
-
+
@@ -5739,7 +5764,7 @@ Do you want to replace it?
Specify second extension line origin
-
+
@@ -5750,12 +5775,12 @@ Do you want to replace it?
Specify dimension line location
-
+
Enter dimension text:
-
+
@@ -5763,12 +5788,12 @@ Do you want to replace it?
&Angular
-
+
Select first line
-
+
@@ -5780,17 +5805,17 @@ Do you want to replace it?
Select second line
-
+
Specify dimension arc line location
-
+
Enter dimension text:
-
+
@@ -5798,22 +5823,22 @@ Do you want to replace it?
&Diametric
-
+
Not a circle or arc entity
-
+
Not a valid expression
-
+
Select arc or circle entity
-
+
@@ -5824,12 +5849,12 @@ Do you want to replace it?
Specify dimension line location
-
+
Enter dimension text:
-
+
@@ -5837,12 +5862,12 @@ Do you want to replace it?
&Leader
-
+
Specify target point
-
+
@@ -5852,7 +5877,7 @@ Do you want to replace it?
Specify next point
-
+
@@ -5880,12 +5905,12 @@ Do you want to replace it?
Not a valid expression
-
+
Specify first extension line origin
-
+
@@ -5895,7 +5920,7 @@ Do you want to replace it?
Specify second extension line origin
-
+
@@ -5906,17 +5931,17 @@ Do you want to replace it?
Specify dimension line location
-
+
Enter dimension text:
-
+
Enter dimension line angle:
-
+
@@ -5924,22 +5949,22 @@ Do you want to replace it?
&Radial
-
+
Not a circle or arc entity
-
+
Not a valid expression
-
+
Select arc or circle entity
-
+
@@ -5950,12 +5975,12 @@ Do you want to replace it?
Specify dimension line position or enter angle:
-
+
Enter dimension text:
-
+
@@ -5963,7 +5988,7 @@ Do you want to replace it?
&Center, Point, Angles
-
+
@@ -5972,17 +5997,17 @@ Do you want to replace it?
Not a valid expression
-
+
Not a valid chord length
-
+
Specify center
-
+
@@ -5992,7 +6017,7 @@ Do you want to replace it?
Specify radius
-
+
@@ -6006,22 +6031,22 @@ Do you want to replace it?
Specify start angle:
-
+
Specify end angle or [Angle/chord Length]
-
+
Specify included angle:
-
+
Specify chord length:
-
+
@@ -6034,12 +6059,12 @@ Do you want to replace it?
Invalid arc data.
-
+
Specify startpoint or [Center]
-
+
@@ -6049,7 +6074,7 @@ Do you want to replace it?
Specify second point
-
+
@@ -6060,7 +6085,7 @@ Do you want to replace it?
Specify endpoint
-
+
@@ -6068,12 +6093,12 @@ Do you want to replace it?
Arc: Tangential
-
+
Specify base entity
-
+
@@ -6083,7 +6108,7 @@ Do you want to replace it?
Specify end angle
-
+
@@ -6096,17 +6121,17 @@ Do you want to replace it?
Center, &Point
-
+
Not a valid expression
-
+
Specify center
-
+
@@ -6116,7 +6141,7 @@ Do you want to replace it?
Specify radius
-
+
@@ -6134,12 +6159,12 @@ Do you want to replace it?
Invalid Circle data.
-
+
Specify first point
-
+
@@ -6149,7 +6174,7 @@ Do you want to replace it?
Specify second point
-
+
@@ -6167,12 +6192,12 @@ Do you want to replace it?
Invalid circle data.
-
+
Specify first point
-
+
@@ -6182,7 +6207,7 @@ Do you want to replace it?
Specify second point
-
+
@@ -6193,7 +6218,7 @@ Do you want to replace it?
Specify third point
-
+
@@ -6206,12 +6231,12 @@ Do you want to replace it?
Not a valid expression
-
+
Specify circle center
-
+
@@ -6221,7 +6246,7 @@ Do you want to replace it?
Specify circle radius
-
+
@@ -6234,24 +6259,24 @@ Do you want to replace it?
&Ellipse Arc (Axis)
-
+
&Ellipse (Axis)
-
+
Not a valid expression
-
+
Specify ellipse center
-
+
@@ -6261,7 +6286,7 @@ Do you want to replace it?
Specify endpoint of major axis
-
+
@@ -6274,17 +6299,17 @@ Do you want to replace it?
Specify endpoint or length of minor axis:
-
+
Specify start angle
-
+
Specify end angle
-
+
@@ -6292,17 +6317,17 @@ Do you want to replace it?
&Hatch
-
+
Hatch created successfully.
-
+
Invalid hatch area. Please check that the entities chosen form one or more closed contours.
-
+
@@ -6310,18 +6335,18 @@ Do you want to replace it?
&Image
-
+
Not a valid expression
-
+
Specify reference point
-
+
@@ -6331,12 +6356,12 @@ Do you want to replace it?
Enter angle:
-
+
Enter factor:
-
+
@@ -6349,7 +6374,7 @@ Do you want to replace it?
Specify first point
-
+
@@ -6359,7 +6384,7 @@ Do you want to replace it?
Specify next point or [%1]
-
+
@@ -6370,17 +6395,17 @@ Do you want to replace it?
Specify next point
-
+
Cannot close sequence of lines: Not enough entities defined yet.
-
+
Cannot undo: Not enough entities defined yet.
-
+
@@ -6404,12 +6429,12 @@ Do you want to replace it?
Not a valid expression
-
+
Specify position
-
+
@@ -6419,7 +6444,7 @@ Do you want to replace it?
Enter angle:
-
+
@@ -6430,7 +6455,7 @@ Do you want to replace it?
Enter length:
-
+
@@ -6438,18 +6463,18 @@ Do you want to replace it?
Bisector
-
+
Not a valid expression
-
+
Select first line
-
+
@@ -6459,7 +6484,7 @@ Do you want to replace it?
Select second line
-
+
@@ -6471,12 +6496,12 @@ Do you want to replace it?
Enter bisector length:
-
+
Enter number of bisectors:
-
+
@@ -6489,7 +6514,7 @@ Do you want to replace it?
Click and drag to draw a line
-
+
@@ -6507,7 +6532,7 @@ Do you want to replace it?
Specify first point
-
+
@@ -6517,7 +6542,7 @@ Do you want to replace it?
Specify second point
-
+
@@ -6541,7 +6566,7 @@ Do you want to replace it?
Specify Distance <%1> or select entity or [%2]
-
+
@@ -6551,18 +6576,18 @@ Do you want to replace it?
Enter number:
-
+
Not a valid expression
-
+
Not a valid number. Try 1..99
-
+
@@ -6575,7 +6600,7 @@ Do you want to replace it?
Select entity
-
+
@@ -6585,7 +6610,7 @@ Do you want to replace it?
Specify through point
-
+
@@ -6596,17 +6621,17 @@ Do you want to replace it?
Number:
-
+
Not a valid number. Try 1..99
-
+
Not a valid expression
-
+
@@ -6614,32 +6639,32 @@ Do you want to replace it?
Pol&ygon (Cen,Cor)
-
+
Specify center
-
+
Specify a corner
-
+
Enter number:
-
+
Not a valid number. Try 1..9999
-
+
Not a valid expression
-
+
@@ -6647,12 +6672,12 @@ Do you want to replace it?
Polygo&n (Cor,Cor)
-
+
Specify first corner
-
+
@@ -6662,7 +6687,7 @@ Do you want to replace it?
Specify second corner
-
+
@@ -6673,17 +6698,17 @@ Do you want to replace it?
Number:
-
+
Not a valid number. Try 1..9999
-
+
Not a valid expression.
-
+
@@ -6696,7 +6721,7 @@ Do you want to replace it?
Specify first corner
-
+
@@ -6706,7 +6731,7 @@ Do you want to replace it?
Specify second corner
-
+
@@ -6724,18 +6749,18 @@ Do you want to replace it?
Orthogonal
-
+
Not a valid expression
-
+
Select base entity
-
+
@@ -6745,7 +6770,7 @@ Do you want to replace it?
Specify position
-
+
@@ -6758,12 +6783,12 @@ Do you want to replace it?
Tangent (P,C)
-
+
Specify point
-
+
@@ -6773,7 +6798,7 @@ Do you want to replace it?
Select circle, arc or ellipse
-
+
@@ -6786,12 +6811,12 @@ Do you want to replace it?
Tangent (C,C)
-
+
Select first circle or arc
-
+
@@ -6801,7 +6826,7 @@ Do you want to replace it?
Select second circle or arc
-
+
@@ -6819,7 +6844,7 @@ Do you want to replace it?
Specify location
-
+
@@ -6832,17 +6857,17 @@ Do you want to replace it?
&Polyline
-
+
Draw polylines
-
+
Specify first point
-
+
@@ -6852,7 +6877,7 @@ Do you want to replace it?
Specify next point or [%1]
-
+
@@ -6863,22 +6888,22 @@ Do you want to replace it?
Specify next point
-
+
Cannot close sequence of lines: Not enough entities defined yet.
-
+
Undo disallowed due a fatal bug somewhere. Sorry.
-
+
Cannot undo: Not enough entities defined yet.
-
+
@@ -6886,12 +6911,12 @@ Do you want to replace it?
&Spline
-
+
Specify first control point
-
+
@@ -6901,7 +6926,7 @@ Do you want to replace it?
Specify next control point or [%1]
-
+
@@ -6912,12 +6937,12 @@ Do you want to replace it?
Specify next control point
-
+
Cannot undo: Not enough entities defined yet.
-
+
@@ -6930,7 +6955,7 @@ Do you want to replace it?
Specify insertion point
-
+
@@ -6940,7 +6965,7 @@ Do you want to replace it?
Enter text:
-
+
@@ -6951,22 +6976,22 @@ Do you want to replace it?
RS_ActionEditCopy
-
+
&Copy
&Salin
-
+
Cu&t
Poto&ng
-
+
Specify reference point
-
+
-
+
Cancel
Batal
@@ -6974,17 +6999,17 @@ Do you want to replace it?
RS_ActionEditPaste
-
+
&Paste
&Tempel
-
+
Set reference point
-
+
-
+
Cancel
Batal
@@ -6992,20 +7017,20 @@ Do you want to replace it?
RS_ActionEditUndo
-
+
&Undo
-
+
-
+
&Redo
-
+
RS_ActionFileNew
-
+
&New...
&Baru...
@@ -7013,7 +7038,7 @@ Do you want to replace it?
RS_ActionFileOpen
-
+
&Open...
&Buka...
@@ -7021,7 +7046,7 @@ Do you want to replace it?
RS_ActionFileSave
-
+
&Save
&Simpan
@@ -7029,7 +7054,7 @@ Do you want to replace it?
RS_ActionFileSaveAs
-
+
Save &as...
Simpan &sebagai...
@@ -7049,12 +7074,12 @@ Do you want to replace it?
Lines are parallel
-
+
Specify first line
-
+
@@ -7064,7 +7089,7 @@ Do you want to replace it?
Specify second line
-
+
@@ -7077,12 +7102,12 @@ Do you want to replace it?
Polygonal Area
-
+
Area: %1
-
+
@@ -7098,7 +7123,7 @@ Do you want to replace it?
Specify first point of polygon
-
+
@@ -7108,12 +7133,12 @@ Do you want to replace it?
Specify next point of polygon
-
+
Terminate
-
+
@@ -7131,7 +7156,7 @@ Do you want to replace it?
Specify first point of distance
-
+
@@ -7141,7 +7166,7 @@ Do you want to replace it?
Specify second point of distance
-
+
@@ -7154,7 +7179,7 @@ Do you want to replace it?
&Distance Entity to Point
-
+
@@ -7164,7 +7189,7 @@ Do you want to replace it?
Specify entity
-
+
@@ -7174,7 +7199,7 @@ Do you want to replace it?
Specify point
-
+
@@ -7187,22 +7212,22 @@ Do you want to replace it?
Point inside contour
-
+
Point is inside selected contour.
-
+
Point is outside selected contour.
-
+
Specify point
-
+
@@ -7215,17 +7240,17 @@ Do you want to replace it?
&Total length of selected entities
-
+
Total Length of selected entities: %1
-
+
At least one of the selected entities cannot be measured.
-
+
@@ -7233,7 +7258,7 @@ Do you want to replace it?
Add Layer
-
+
@@ -7241,7 +7266,7 @@ Do you want to replace it?
&Edit Layer
-
+
@@ -7249,12 +7274,12 @@ Do you want to replace it?
&Freeze all
-
+
&Defreeze all
-
+
@@ -7262,7 +7287,7 @@ Do you want to replace it?
Remove Layer
-
+
@@ -7270,7 +7295,7 @@ Do you want to replace it?
Toggle Layer Lock
-
+
@@ -7278,7 +7303,7 @@ Do you want to replace it?
&Toggle Layer
-
+
@@ -7286,23 +7311,23 @@ Do you want to replace it?
Insert Library Object
-
+
- Cannot open file '%1'
- Tak dapat membuka berkas '%1'
+ Cannot open file '%1'
+ Tak dapat membuka berkas '%1'
Not a valid expression
-
+
Specify reference point
-
+
@@ -7312,12 +7337,12 @@ Do you want to replace it?
Enter angle:
-
+
Enter factor:
-
+
@@ -7325,7 +7350,7 @@ Do you want to replace it?
(Un-)&Lock Relative Zero
-
+
@@ -7341,18 +7366,18 @@ Do you want to replace it?
&Bevel
-
+
Not a valid expression
-
+
Select first entity
-
+
@@ -7362,7 +7387,7 @@ Do you want to replace it?
Select second entity
-
+
@@ -7374,12 +7399,12 @@ Do you want to replace it?
Enter length 1:
-
+
Enter length 2:
-
+
@@ -7387,33 +7412,33 @@ Do you want to replace it?
&Divide
-
+
No Entity found.
-
+
Entity must be a line, arc, circle or ellipse.
-
+
Cutting point is invalid.
-
+
Cutting point is not on entity.
-
+
Specify entity to cut
-
+
@@ -7423,7 +7448,7 @@ Do you want to replace it?
Specify cutting point
-
+
@@ -7444,52 +7469,52 @@ Do you want to replace it?
Delete Freehand
-
+
Entities not in the same polyline.
-
+
Parent of second entity is not a polyline
-
+
Parent of second entity is NULL
-
+
One of the chosen entities is NULL
-
+
Parent of first entity is not a polyline
-
+
Parent of first entity is NULL
-
+
First entity is NULL
-
+
Second entity is NULL
-
+
Specify first break point on a polyline
-
+
@@ -7499,7 +7524,7 @@ Do you want to replace it?
Specify second break point on the same polyline
-
+
@@ -7517,7 +7542,7 @@ Do you want to replace it?
Pick entity to delete
-
+
@@ -7538,7 +7563,7 @@ Do you want to replace it?
&Explode Text into Letters
-
+
@@ -7551,7 +7576,7 @@ Do you want to replace it?
Specify first point of mirror line
-
+
@@ -7561,7 +7586,7 @@ Do you want to replace it?
Specify second point of mirror line
-
+
@@ -7579,7 +7604,7 @@ Do you want to replace it?
Specify reference point
-
+
@@ -7589,7 +7614,7 @@ Do you want to replace it?
Specify target point
-
+
@@ -7607,12 +7632,12 @@ Do you want to replace it?
Not a valid expression
-
+
Specify reference point
-
+
@@ -7622,7 +7647,7 @@ Do you want to replace it?
Specify target point
-
+
@@ -7633,7 +7658,7 @@ Do you want to replace it?
Enter rotation angle:
-
+
@@ -7646,7 +7671,7 @@ Do you want to replace it?
Specify reference point
-
+
@@ -7659,12 +7684,12 @@ Do you want to replace it?
Rotate T&wo
-
+
Specify absolute reference point
-
+
@@ -7674,7 +7699,7 @@ Do you want to replace it?
Specify relative reference point
-
+
@@ -7692,12 +7717,12 @@ Do you want to replace it?
Not a valid expression
-
+
Specify first entity
-
+
@@ -7708,17 +7733,17 @@ Do you want to replace it?
Specify second entity
-
+
Enter radius:
-
+
Cancel
-
+ Batal
@@ -7726,12 +7751,12 @@ Do you want to replace it?
&Scale
-
+
Specify reference point
-
+
@@ -7744,12 +7769,12 @@ Do you want to replace it?
&Stretch
-
+
Specify first corner
-
+
@@ -7759,7 +7784,7 @@ Do you want to replace it?
Specify second corner
-
+
@@ -7771,12 +7796,12 @@ Do you want to replace it?
Specify reference point
-
+
Specify target point
-
+
@@ -7784,28 +7809,28 @@ Do you want to replace it?
&Trim
-
+
&Trim Two
-
+
Select first trim entity
-
+
Cancel
-
+ Batal
Select limiting entity
-
+
@@ -7816,12 +7841,12 @@ Do you want to replace it?
Select second trim entity
-
+
Select entity to trim
-
+
@@ -7834,27 +7859,27 @@ Do you want to replace it?
No entity found.
-
+
The chosen Entity is in a block. Please edit the block.
-
+
The chosen Entity is not an atomic entity or cannot be trimmed.
-
+
Not a valid expression
-
+
Select entity to trim or enter distance:
-
+
@@ -7867,7 +7892,7 @@ Do you want to replace it?
Current &Drawing Preferences
-
+
@@ -7875,38 +7900,38 @@ Do you want to replace it?
&Add node
-
+
- Add polyline's node
-
+ Add polyline's node
+
No Entity found.
-
+
Entity must be a polyline.
-
+
Adding point is invalid.
-
+
Adding point is not on entity.
-
+
Specify polyline to add nodes
-
+
@@ -7915,8 +7940,8 @@ Do you want to replace it?
- Specify adding node's point
-
+ Specify adding node's point
+
@@ -7929,32 +7954,32 @@ Do you want to replace it?
A&ppend node
-
+
- Append polyline's node
-
+ Append polyline's node
+
No Entity found.
-
+
Entity must be a polyline.
-
+
Click somewhere near the beginning or end of existing polyline.
-
+
Specify the polyline somewhere near the beginning or end point
-
+
@@ -7964,7 +7989,7 @@ Do you want to replace it?
Specify next point or [%1]
-
+
@@ -7975,7 +8000,7 @@ Do you want to replace it?
Specify next point
-
+
@@ -7983,38 +8008,38 @@ Do you want to replace it?
&Delete node
-
+
- Delete polyline's node
-
+ Delete polyline's node
+
No Entity found.
-
+
Entity must be a polyline.
-
+
Adding point is invalid.
-
+
Adding point is not on entity.
-
+
Specify polyline to delete node
-
+
@@ -8023,8 +8048,8 @@ Do you want to replace it?
- Specify deleting node's point
-
+ Specify deleting node's point
+
@@ -8037,45 +8062,45 @@ Do you want to replace it?
Delete &between two nodes
-
+
Delete between two nodes
-
+
No Entity found.
-
+
Entity must be a polyline.
-
+
Deletinging point is invalid.
-
+
Deleting point is not on entity.
-
+
Deleteinging point is not on entity.
-
+
Specify polyline to delete between two nodes
-
+
@@ -8085,7 +8110,7 @@ Do you want to replace it?
Specify first node
-
+
@@ -8096,7 +8121,7 @@ Do you want to replace it?
Specify second node
-
+
@@ -8104,27 +8129,27 @@ Do you want to replace it?
Create &Equidistant Polylines
-
+
Create Equidistant Polylines
-
+
No Entity found.
-
+
Entity must be a polyline.
-
+
Choose the original polyline
-
+
@@ -8137,27 +8162,27 @@ Do you want to replace it?
Create Polyline from Existing &Segments
-
+
Create Polyline from Existing Segments
-
+
No Entity found.
-
+
Entity must be a line or arc.
-
+
Choose one of the segments on the original polyline
-
+
@@ -8170,41 +8195,41 @@ Do you want to replace it?
&Trim segments
-
+
- Trim polyline's segments
-
+ Trim polyline's segments
+
No Entity found.
-
+
Entity must be a polyline.
-
+
Specifying point is invalid.
-
+
No Segment found on entity.
-
+
Specify polyline to trim
-
+
@@ -8214,7 +8239,7 @@ Do you want to replace it?
Specify first segment
-
+
@@ -8225,13 +8250,13 @@ Do you want to replace it?
Specify second segment
-
+
RS_ActionPrintPreview
-
+
Print Pre&view
Pr&atinjau Cetak
@@ -8246,7 +8271,7 @@ Do you want to replace it?
Deselect &all
-
+
@@ -8259,12 +8284,12 @@ Do you want to replace it?
(De-)Select &Contour
-
+
Entity must be an Atomic Entity.
-
+
@@ -8272,17 +8297,17 @@ Do you want to replace it?
Select Intersected Entities
-
+
Deselect Intersected Entities
-
+
Choose first point of intersection line
-
+
@@ -8292,7 +8317,7 @@ Do you want to replace it?
Choose second point of intersection line
-
+
@@ -8313,7 +8338,7 @@ Do you want to replace it?
(De-)Select Layer
-
+
@@ -8321,7 +8346,7 @@ Do you want to replace it?
Select Entity
-
+
@@ -8329,17 +8354,17 @@ Do you want to replace it?
Select Window
-
+
Deselect Window
-
+
Choose first edge
-
+
@@ -8349,7 +8374,7 @@ Do you want to replace it?
Choose second edge
-
+
@@ -8362,12 +8387,12 @@ Do you want to replace it?
Set Relative Zero
-
+
Set relative Zero
-
+
@@ -8380,12 +8405,12 @@ Do you want to replace it?
I&ntersection Manually
-
+
Select first entity
-
+
@@ -8396,7 +8421,7 @@ Do you want to replace it?
Select second entity
-
+
@@ -8404,36 +8429,36 @@ Do you want to replace it?
Regenerate Dimension Entities
-
+
Regenerated %1 dimension entities
-
+
No dimension entities found
-
+
RS_ActionZoomAuto
-
+
&Auto Zoom
-
+
RS_ActionZoomIn
-
+
Zoom &In
Perbe&sar
-
+
Zoom &Out
Perke&cil
@@ -8441,51 +8466,51 @@ Do you want to replace it?
RS_ActionZoomPan
-
+
&Pan Zoom
-
+
RS_ActionZoomPrevious
-
+
&Previous View
-
+
RS_ActionZoomRedraw
-
+
&Redraw
-
+
RS_ActionZoomWindow
-
+
&Window Zoom
-
+
-
+
Specify first edge
-
+
-
+
Cancel
Batal
-
+
Specify second edge
-
+
-
+
Back
Mundur
@@ -8500,7 +8525,7 @@ Do you want to replace it?
po
-
+
@@ -8510,29 +8535,29 @@ Do you want to replace it?
ln
-
+
l
-
+
polyline
-
+
offset
-
+
o
offset
-
+
@@ -8543,17 +8568,17 @@ Do you want to replace it?
par
parallel
-
+
arc
-
+
a
-
+
@@ -8563,7 +8588,7 @@ Do you want to replace it?
ci
-
+
@@ -8573,12 +8598,12 @@ Do you want to replace it?
rec
-
+
rectang
-
+
@@ -8590,525 +8615,525 @@ Do you want to replace it?
regen
-
+
rg
zoom - redraw
-
+
zr
zoom - redraw
-
+
zw
zoom - window
-
+
za
zoom - auto
-
+
zp
zoom - pan
-
+
zv
zoom - previous
-
+
kill
-
+
k
-
+
undo
-
+
u
undo
-
+
redo
-
+
r
-
+
da
dimension - aligned
-
+
da
-
+
dh
dimension - horizontal
-
+
dh
-
+
dr
dimension - linear
-
+
dr
-
+
dv
dimension - vertical
-
+
dv
-
+
ld
dimension - leader
-
+
ld
-
+
dimregen
-
+
tm
modify - multi trim (extend)
-
+
tm
-
+
xt
modify - trim (extend)
-
+
xt
-
+
rm
modify - trim
-
+
rm
-
+
mv
modify - move
-
+
mv
-
+
ch
modify - bevel (chamfer)
-
+
ch
-
+
mi
modify - mirror
-
+
mi
-
+
ro
modify - rotate
-
+
ro
-
+
sz
modify - scale
-
+
sz
-
+
ss
modify - stretch
-
+
ss
-
+
er
modify - delete (erase)
-
+
er
-
+
oo
modify - undo (oops)
-
+
oo
-
+
uu
modify - redo
-
+
uu
-
+
xp
modify - explode
-
+
xp
-
+
os
snap - none
-
+
os
-
+
sg
snap - grid
-
+
sg
-
+
se
snap - end
-
+
se
-
+
si
snap - intersection
-
+
si
-
+
sn
snap - center
-
+
sn
-
+
sm
snap - middle
-
+
sm
-
+
sn
snap - nearest
-
+
np
snap - nearest point
-
+
np
-
+
tn
Deselect all
-
+
tn
-
+
Command: %1
-
+
po
point
-
+
li
line
-
+
pa
parallel
-
+
re
rectangle
-
+
rp
regular polygon
-
+
ci
circle
-
+
c2
2 point circle
-
+
c3
3 point circle
-
+
ar
arc
-
+
a3
3 point arc
-
+
ep
ellipse
-
+
tx
text
-
+
mt
text
-
+
rd
redraw
-
+
zi
zoom - in
-
+
zo
zoom - out
-
+
fr*
layers - freeze all
-
+
th*
layers - defreeze all
-
+
ex
modify - explode
-
+
@@ -9125,7 +9150,7 @@ Do you want to replace it?
chord length
-
+
@@ -9136,7 +9161,7 @@ Do you want to replace it?
columnspacing
-
+
@@ -9163,7 +9188,7 @@ Do you want to replace it?
number
-
+
@@ -9180,18 +9205,18 @@ Do you want to replace it?
rowspacing
-
+
through
-
+
trim
-
+
@@ -9203,13 +9228,13 @@ Do you want to replace it?
ang
angle
-
+
a
angle
-
+
@@ -9220,13 +9245,13 @@ Do you want to replace it?
cen
center
-
+
c
center
-
+
@@ -9238,55 +9263,55 @@ Do you want to replace it?
l
chord length
-
+
c
close
-
+
cols
columns
-
+
c
columns
-
+
columnspacing
columnspacing for inserts
-
+
colspacing
columnspacing for inserts
-
+
cs
columnspacing for inserts
-
+
fact
factor
-
+
f
factor
-
+
@@ -9309,13 +9334,13 @@ Do you want to replace it?
len
length
-
+
l
length
-
+
@@ -9327,13 +9352,13 @@ Do you want to replace it?
len1
length1
-
+
l1
length1
-
+
@@ -9345,90 +9370,90 @@ Do you want to replace it?
len2
length2
-
+
l2
length2
-
+
num
number
-
+
n
number
-
+
r
radius
-
+
reversed
reversed arc
-
+
rev
reversed arc
-
+
r
reversed arc
-
+
r
rows
-
+
rowspacing
rowspacing for inserts
-
+
rs
rowspacing for inserts
-
+
t
text
-
+
t
through
-
+
b
back
-
+
Available commands:
-
+
diff --git a/ts/librecad_it.ts b/ts/librecad_it.ts
index 105a96b081..1f3ab21669 100644
--- a/ts/librecad_it.ts
+++ b/ts/librecad_it.ts
@@ -1,7 +1,8 @@
+
-
+
Loading..
Caricamento..
@@ -114,7 +115,7 @@
About the application
- Informazioni sull'applicazione
+ Informazioni sull'applicazione
&Scripts
@@ -170,7 +171,7 @@
Exiting application...
- Uscita dall'applicazione...
+ Uscita dall'applicazione...
About...
@@ -279,8 +280,8 @@ Data: %1
Riga di comando
- Block '%1'
- Blocco '%1'
+ Block '%1'
+ Blocco '%1'
Cannot open the file
@@ -336,7 +337,7 @@ Controlla i permessi.
Date: %1
- Data: %1
+ Data: %1
This is a %1 version which terminates
@@ -349,7 +350,7 @@ You can save your work now.
automaticamente dopo 10 minuti. Questo
software è solo per uso dimostrativo.
Si prega di acquistare la versione completa
-dell'applicazione da %2.
+dell'applicazione da %2.
Puoi salvare il tuo lavoro adesso.
@@ -358,15 +359,15 @@ Puoi salvare il tuo lavoro adesso.
&Spline
-
+
- Running script '%1'
- Eseguo script '%1'
+ Running script '%1'
+ Eseguo script '%1'
- Inserting block '%1'
- Inserisco blocco '%1'
+ Inserting block '%1'
+ Inserisco blocco '%1'
&Polyline
@@ -374,46 +375,66 @@ Puoi salvare il tuo lavoro adesso.
CTRL+M
-
+
Insert Image
-
+
Auto-saving drawing...
-
+
Auto-saved drawing
-
+
Cannot auto-save the file
%1
Please check the permissions.
Auto-save disabled.
-
+
SVN Revision: %1
-
+
Help
-
+
- Bugger, I couldn't find the helpfiles on the filesystem.
-
+ Bugger, I couldn't find the helpfiles on the filesystem.
+
&Plugins
-
+
Import
-
+
+
+
+ &Toolbars
+
+
+
+ Compiled on: %1
+
+
+
+ Program Icons Supplied by
+
+
+
+ Splash and Logo supplied by
+
+
+
+ Main Website :
+
@@ -473,7 +494,7 @@ Auto-save disabled.
Quits the application
- Chiudi l'applicazione
+ Chiudi l'applicazione
Zoom in
@@ -553,7 +574,7 @@ Auto-save disabled.
Undoes last action
- Annulla l'ultima azione
+ Annulla l'ultima azione
Redo
@@ -565,7 +586,7 @@ Auto-save disabled.
Redoes last action
- Ripeti l'ultima azione
+ Ripeti l'ultima azione
Cut
@@ -986,15 +1007,15 @@ Auto-save disabled.
Ellipse Arc with Axis
- Arco d'Ellisse con Assi
+ Arco d'Ellisse con Assi
&Ellipse Arc (Axis)
- &Arco d'Ellisse (Assi)
+ &Arco d'Ellisse (Assi)
Draw Ellipse Arcs
- Disegna Archi d'Ellisse
+ Disegna Archi d'Ellisse
Text
@@ -1318,15 +1339,15 @@ Auto-save disabled.
On Entity
- Sull'Oggetto
+ Sull'Oggetto
&On Entity
- &Sull'Oggetto
+ &Sull'Oggetto
Snap to nearest point on entity
- Aggancia il punto più vicino sull'oggetto
+ Aggancia il punto più vicino sull'oggetto
Center
@@ -1462,15 +1483,15 @@ Auto-save disabled.
Point inside contour
- Punto all'interno di un contorno
+ Punto all'interno di un contorno
&Point inside contour
- &Punto all'interno di un contorno
+ &Punto all'interno di un contorno
Checks if a given point is inside the selected contour
- Controlla se un punto dato è all'interno del contorno selezionato
+ Controlla se un punto dato è all'interno del contorno selezionato
Defreeze all
@@ -1618,7 +1639,7 @@ Auto-save disabled.
General Application Preferences
- Preferenze Generali Dell'Applicazione
+ Preferenze Generali Dell'Applicazione
Drawing
@@ -1754,7 +1775,7 @@ Auto-save disabled.
Shows a preview of a print
- Mostra l'Anteprima di Stampa
+ Mostra l'Anteprima di Stampa
Distance Point to Point
@@ -1790,7 +1811,7 @@ Auto-save disabled.
Measures the angle between two lines
- Misura l'angolo fra due linee
+ Misura l'angolo fra due linee
Export Drawing
@@ -1810,7 +1831,7 @@ Auto-save disabled.
Modify Entity Properties
- Modifica Proprietà dell'Oggetto
+ Modifica Proprietà dell'Oggetto
&Properties
@@ -1894,7 +1915,7 @@ Auto-save disabled.
Opens the integrated development environment for scripting
- Apri l'ambiente integrato di sviluppo per gli script
+ Apri l'ambiente integrato di sviluppo per gli script
Run Script..
@@ -1926,15 +1947,15 @@ Auto-save disabled.
CTRL-G
-
+
Restrict&Vertically
-
+
&back
-
+
@@ -2005,8 +2026,8 @@ Auto-save disabled.
Rinomina Blocco
- Could not name block. A block named "%1" already exists.
- Impossibile rinominare il blocco. Esiste già un blocco chiamato "%1" .
+ Could not name block. A block named "%1" already exists.
+ Impossibile rinominare il blocco. Esiste già un blocco chiamato "%1" .
&OK
@@ -2130,7 +2151,7 @@ in una finestra separata
Arc tangential to base entity with radius
- Arco tangente alla base dell'oggetto con raggio
+ Arco tangente alla base dell'oggetto con raggio
@@ -2339,48 +2360,48 @@ in una finestra separata
Principale
- Show menu "Lines"
- Mostra menù "Linee"
+ Show menu "Lines"
+ Mostra menù "Linee"
- Show menu "Arcs"
- Mostra menù "Archi"
+ Show menu "Arcs"
+ Mostra menù "Archi"
- Show menu "Circles"
- Mostra menù "Cerchi"
+ Show menu "Circles"
+ Mostra menù "Cerchi"
- Show menu "Points"
- Mostra menù "Punti"
+ Show menu "Points"
+ Mostra menù "Punti"
- Show menu "Measure"
- Mostra menù "Misura"
+ Show menu "Measure"
+ Mostra menù "Misura"
- Show menu "Ellipses"
- Mostra menù "Ellissi"
+ Show menu "Ellipses"
+ Mostra menù "Ellissi"
Hatches / Solid Fills
Tratteggi / Riempimenti
- Show menu "Edit"
- Mostra menù "Modifica"
+ Show menu "Edit"
+ Mostra menù "Modifica"
- Show menu "Dimensions"
- Mostra menù "Quote"
+ Show menu "Dimensions"
+ Mostra menù "Quote"
Texts
Testi
- Show menu "Select"
- Mostra menù "Seleziona"
+ Show menu "Select"
+ Mostra menù "Seleziona"
Create Block
@@ -2396,7 +2417,7 @@ in una finestra separata
Splines
-
+
Polylines
@@ -2623,7 +2644,7 @@ in una finestra separata
Snap to closest point on entity
- Aggancia al punto più vicino sull'oggetto
+ Aggancia al punto più vicino sull'oggetto
Snap to center points
@@ -2674,7 +2695,7 @@ in una finestra separata
QG_CadToolBarSplines
Splines
-
+
Back to main menu
@@ -2682,7 +2703,7 @@ in una finestra separata
Spline
-
+
@@ -2816,7 +2837,7 @@ in una finestra separata
...
-
+
@@ -3166,12 +3187,12 @@ in una finestra separata
Benvenuto
- <font size="+1"><b>Welcome to QCad</b>
+ <font size="+1"><b>Welcome to QCad</b>
</font>
<br>
Please choose the unit you want to use for new drawings and your preferred language.<br>
You can changes these settings later in the Options Dialog of QCad.
- <font size="+1"><b>Benvenuto in Qcad</b>
+ <font size="+1"><b>Benvenuto in Qcad</b>
</font>
<br>
Scegli le unità che vuoi usare per i nuovi disegni e la tua lingua.<br>
@@ -3340,7 +3361,7 @@ Puoi cambiare in seguito queste impostazioni nelle Opzioni di Qcad.
...
-
+
@@ -3391,7 +3412,7 @@ Puoi cambiare in seguito queste impostazioni nelle Opzioni di Qcad.
...
-
+
@@ -3442,11 +3463,11 @@ Puoi cambiare in seguito queste impostazioni nelle Opzioni di Qcad.
...
-
+
Ctrl+S
-
+
@@ -3540,7 +3561,7 @@ Puoi cambiare in seguito queste impostazioni nelle Opzioni di Qcad.Centesimali
- Surveyor's units
+ Surveyor's units
Unità topografiche
@@ -3548,8 +3569,8 @@ Puoi cambiare in seguito queste impostazioni nelle Opzioni di Qcad.Opzioni
- For the length formats 'Engineering' and 'Architectural', the unit must be set to Inch.
- Per i formati di lunghezza "Ingegneristica" e "Architettonica", le lunghezze debbono essere impostate su Pollici.
+ For the length formats 'Engineering' and 'Architectural', the unit must be set to Inch.
+ Per i formati di lunghezza "Ingegneristica" e "Architettonica", le lunghezze debbono essere impostate su Pollici.
Extension line extension:
@@ -3661,11 +3682,11 @@ Puoi cambiare in seguito queste impostazioni nelle Opzioni di Qcad.
Splines
-
+
Number of line segments per spline patch:
-
+
4
@@ -3944,7 +3965,7 @@ Puoi cambiare in seguito queste impostazioni nelle Opzioni di Qcad.
Please restart the application to apply all changes.
- Riavvia l'applicazione per applicare tutte le modifiche.
+ Riavvia l'applicazione per applicare tutte le modifiche.
Alt+S
@@ -3960,34 +3981,34 @@ Puoi cambiare in seguito queste impostazioni nelle Opzioni di Qcad.
Program Defaults
-
+
Time between automatc saving of thedocument in minutes.
-
+
Auto save time:
-
+
QG_DlgOptionsVariables
Drawing Variables
-
+
Variable
-
+
Code
-
+
Value
-
+
&OK
@@ -4089,7 +4110,7 @@ Puoi cambiare in seguito queste impostazioni nelle Opzioni di Qcad.
...
-
+
@@ -4140,7 +4161,7 @@ Puoi cambiare in seguito queste impostazioni nelle Opzioni di Qcad.
...
-
+
@@ -4191,14 +4212,14 @@ Puoi cambiare in seguito queste impostazioni nelle Opzioni di Qcad.
...
-
+
QG_DlgSpline
Spline
-
+
Layer:
@@ -4394,7 +4415,7 @@ Puoi cambiare in seguito queste impostazioni nelle Opzioni di Qcad.
Insert Unicode
- Inserisci "Unicode"
+ Inserisci "Unicode"
Page:
@@ -4406,203 +4427,203 @@ Puoi cambiare in seguito queste impostazioni nelle Opzioni di Qcad.
[0000-007F] Basic Latin
-
+
[0080-00FF] Latin-1 Supplementary
-
+
[0100-017F] Latin Extended-A
-
+
[0180-024F] Latin Extended-B
-
+
[0250-02AF] IPA Extensions
-
+
[02B0-02FF] Spacing Modifier Letters
-
+
[0300-036F] Combining Diacritical Marks
-
+
[0370-03FF] Greek and Coptic
-
+
[0400-04FF] Cyrillic
-
+
[0500-052F] Cyrillic Supplementary
-
+
[0530-058F] Armenian
-
+
[0590-05FF] Hebrew
-
+
[0600-06FF] Arabic
-
+
[0700-074F] Syriac
-
+
[0780-07BF] Thaana
-
+
[0900-097F] Devanagari
-
+
[0980-09FF] Bengali
-
+
[0A00-0A7F] Gurmukhi
-
+
[0A80-0AFF] Gujarati
-
+
[0B00-0B7F] Oriya
-
+
[0B80-0BFF] Tamil
-
+
[0C00-0C7F] Telugu
-
+
[0C80-0CFF] Kannada
-
+
[0D00-0D7F] Malayalam
-
+
[0D80-0DFF] Sinhala
-
+
[0E00-0E7F] Thai
-
+
[0E80-0EFF] Lao
-
+
[0F00-0FFF] Tibetan
-
+
[1000-109F] Myanmar
-
+
[10A0-10FF] Georgian
-
+
[1100-11FF] Hangul Jamo
-
+
[1200-137F] Ethiopic
-
+
[13A0-13FF] Cherokee
-
+
[1400-167F] Unified Canadian Aboriginal Syllabic
-
+
[1680-169F] Ogham
-
+
[16A0-16FF] Runic
-
+
[1700-171F] Tagalog
-
+
[1720-173F] Hanunoo
-
+
[1740-175F] Buhid
-
+
[1760-177F] Tagbanwa
-
+
[1780-17FF] Khmer
-
+
[1800-18AF] Mongolian
-
+
[1E00-1EFF] Latin Extended Additional
-
+
[1F00-1FFF] Greek Extended
-
+
[2000-206F] General Punctuation
-
+
[2070-209F] Superscripts and Subscripts
-
+
[20A0-20CF] Currency Symbols
-
+
[20D0-20FF] Combining Marks for Symbols
-
+
[2100-214F] Letterlike Symbols
-
+
[2150-218F] Number Forms
-
+
[2190-21FF] Arrows
@@ -4614,11 +4635,11 @@ Puoi cambiare in seguito queste impostazioni nelle Opzioni di Qcad.
[2300-23FF] Miscellaneous Technical
-
+
[2400-243F] Control Pictures
-
+
[2440-245F] Optical Character Recognition
@@ -4626,15 +4647,15 @@ Puoi cambiare in seguito queste impostazioni nelle Opzioni di Qcad.
[2460-24FF] Enclosed Alphanumerics
-
+
[2500-257F] Box Drawing
-
+
[2580-259F] Block Elements
-
+
[25A0-25FF] Geometric Shapes
@@ -4642,19 +4663,19 @@ Puoi cambiare in seguito queste impostazioni nelle Opzioni di Qcad.
[2600-26FF] Miscellaneous Symbols
-
+
[2700-27BF] Dingbats
-
+
[27C0-27EF] Miscellaneous Mathematical Symbols-A
-
+
[27F0-27FF] Supplemental Arrows-A
-
+
[2800-28FF] Braille Patterns
@@ -4662,131 +4683,131 @@ Puoi cambiare in seguito queste impostazioni nelle Opzioni di Qcad.
[2900-297F] Supplemental Arrows-B
-
+
[2980-29FF] Miscellaneous Mathematical Symbols-B
-
+
[2A00-2AFF] Supplemental Mathematical Operators
-
+
[2E80-2EFF] CJK Radicals Supplement
-
+
[2F00-2FDF] Kangxi Radicals
-
+
[2FF0-2FFF] Ideographic Description Characters
-
+
[3000-303F] CJK Symbols and Punctuation
-
+
[3040-309F] Hiragana
-
+
[30A0-30FF] Katakana
-
+
[3100-312F] Bopomofo
-
+
[3130-318F] Hangul Compatibility Jamo
-
+
[3190-319F] Kanbun
-
+
[31A0-31BF] Bopomofo Extended
-
+
[3200-32FF] Enclosed CJK Letters and Months
-
+
[3300-33FF] CJK Compatibility
-
+
[3400-4DBF] CJK Unified Ideographs Extension A
-
+
[4E00-9FAF] CJK Unified Ideographs
-
+
[A000-A48F] Yi Syllables
-
+
[A490-A4CF] Yi Radicals
-
+
[AC00-D7AF] Hangul Syllables
-
+
[D800-DBFF] High Surrogates
-
+
[DC00-DFFF] Low Surrogate Area
-
+
[E000-F8FF] Private Use Area
-
+
[F900-FAFF] CJK Compatibility Ideographs
-
+
[FB00-FB4F] Alphabetic Presentation Forms
-
+
[FB50-FDFF] Arabic Presentation Forms-A
-
+
[FE00-FE0F] Variation Selectors
-
+
[FE20-FE2F] Combining Half Marks
-
+
[FE30-FE4F] CJK Compatibility Forms
-
+
[FE50-FE6F] Small Form Variants
-
+
[FE70-FEFF] Arabic Presentation Forms-B
-
+
[FF00-FFEF] Halfwidth and Fullwidth Forms
-
+
[FFF0-FFFF] Specials
@@ -4794,47 +4815,47 @@ Puoi cambiare in seguito queste impostazioni nelle Opzioni di Qcad.
[10300-1032F] Old Italic
-
+
[10330-1034F] Gothic
-
+
[10400-1044F] Deseret
-
+
[1D000-1D0FF] Byzantine Musical Symbols
-
+
[1D100-1D1FF] Musical Symbols
-
+
[1D400-1D7FF] Mathematical Alphanumeric Symbols
-
+
[20000-2A6DF] CJK Unified Ideographs Extension B
-
+
[2F800-2FA1F] CJK Compatibility Ideographs Supplement
-
+
[E0000-E007F] Tags
-
+
[F0000-FFFFD] Supplementary Private Use Area-A
-
+
[100000-10FFFD] Supplementary Private Use Area-B
-
+
&Height:
@@ -4909,7 +4930,7 @@ Puoi cambiare in seguito queste impostazioni nelle Opzioni di Qcad.
again Still No Text supplied.
-
+
@@ -5260,7 +5281,7 @@ Puoi cambiare in seguito queste impostazioni nelle Opzioni di Qcad.
Snap Point:
- Punto d'aggancio:
+ Punto d'aggancio:
Start
@@ -5325,7 +5346,7 @@ Puoi cambiare in seguito queste impostazioni nelle Opzioni di Qcad.
Distance to original entity
- Distanza dall'oggetto originale
+ Distanza dall'oggetto originale
Number:
@@ -5340,7 +5361,7 @@ Puoi cambiare in seguito queste impostazioni nelle Opzioni di Qcad.QG_LineParallelThroughOptions
Line Parallel Through Options
-
+
Number:
@@ -5515,7 +5536,7 @@ Puoi cambiare in seguito queste impostazioni nelle Opzioni di Qcad.
...
-
+
@@ -5557,11 +5578,11 @@ Puoi cambiare in seguito queste impostazioni nelle Opzioni di Qcad.
Tangential
-
+
Tan Radius
-
+
Angle
@@ -5648,7 +5669,7 @@ Puoi cambiare in seguito queste impostazioni nelle Opzioni di Qcad.QG_SplineOptions
Spline Options
-
+
Degree:
@@ -5850,12 +5871,12 @@ Puoi cambiare in seguito queste impostazioni nelle Opzioni di Qcad.Cancella Layer
- Layer "%1" and all entities on it will be removed.
- Il layer "%1" e tutti gli oggetti in esso contenuti saranno cancellati.
+ Layer "%1" and all entities on it will be removed.
+ Il layer "%1" e tutti gli oggetti in esso contenuti saranno cancellati.
- Layer "%1" can never be removed.
- Il layer "%1" non può essere rimosso.
+ Layer "%1" can never be removed.
+ Il layer "%1" non può essere rimosso.
Layer Dialog
@@ -5866,16 +5887,16 @@ Puoi cambiare in seguito queste impostazioni nelle Opzioni di Qcad.Cancella Blocco
- Block "%1" and all its entities will be removed.
- Il blocco "%1" e tutti i suoi oggetti saranno cancellati.
+ Block "%1" and all its entities will be removed.
+ Il blocco "%1" e tutti i suoi oggetti saranno cancellati.
Layer Properties
Proprietà Layer
- Layer with a name "%1" already exists. Please specify a different name.
- Esiste già un layer con nome "%1" . Scegli un nome diverso.
+ Layer with a name "%1" already exists. Please specify a different name.
+ Esiste già un layer con nome "%1" . Scegli un nome diverso.
@@ -5920,15 +5941,15 @@ Vuoi sostituirlo?
Multiple-image Network Graphics
-
+
Portable Bit Map
-
+
Portable Grey Map
-
+
Portable Network Graphic
@@ -5940,11 +5961,11 @@ Vuoi sostituirlo?
X Bitmap Format
-
+
X Pixel Map
-
+
All Image Files (%1)
@@ -6004,7 +6025,7 @@ Vuoi sostituirlo?
Microinch
-
+
Mil
@@ -6016,7 +6037,7 @@ Vuoi sostituirlo?
Angstrom
-
+
Nanometer
@@ -6040,19 +6061,19 @@ Vuoi sostituirlo?
Gigameter
-
+
Astro
-
+
Lightyear
-
+
Parsec
-
+
Export Image
@@ -6064,12 +6085,16 @@ Vuoi sostituirlo?
Loading Library Paths..
- Caricamento indirizzi delle librerie...
+ Caricamento indirizzi delle librerie...
Loading File %1..
Caricamento File %1..
+
+ Loading...
+
+
RS_ActionBlocksAdd
@@ -6216,8 +6241,8 @@ Vuoi sostituirlo?
&Inserisci Blocco
-
-
+
+
@@ -6312,7 +6337,7 @@ Vuoi sostituirlo?
Specify dimension arc line location
- Posizione dell'arco di quota
+ Posizione dell'arco di quota
Enter dimension text:
@@ -6335,7 +6360,7 @@ Vuoi sostituirlo?
RS_ActionDimDiametric
Not a circle or arc entity
- L'oggetto non è un cerchio o un arco
+ L'oggetto non è un cerchio o un arco
Not a valid expression
@@ -6433,7 +6458,7 @@ Vuoi sostituirlo?
Enter dimension line angle:
- Inserisci l'angolo della linea di quota:
+ Inserisci l'angolo della linea di quota:
Linear
@@ -6476,7 +6501,7 @@ Vuoi sostituirlo?
RS_ActionDimRadial
Not a circle or arc entity
- L'oggetto non è un cerchio o un arco
+ L'oggetto non è un cerchio o un arco
Not a valid expression
@@ -6571,7 +6596,7 @@ Vuoi sostituirlo?
RS_ActionDrawArc3P
Invalid arc data.
- Valori dell'arco non validi.
+ Valori dell'arco non validi.
Specify startpoint or [Center]
@@ -6618,7 +6643,7 @@ Vuoi sostituirlo?
Draw arcs tangential to base entity
- Disegna arco tangente alla base dell'oggetto
+ Disegna arco tangente alla base dell'oggetto
Specify base entity
@@ -6789,7 +6814,7 @@ Vuoi sostituirlo?
Specify ellipse center
- Centro dell'ellisse
+ Centro dell'ellisse
Cancel
@@ -6797,7 +6822,7 @@ Vuoi sostituirlo?
Specify endpoint of major axis
- Punto finale dell'asse maggiore
+ Punto finale dell'asse maggiore
Back
@@ -6805,7 +6830,7 @@ Vuoi sostituirlo?
Specify endpoint or length of minor axis:
- Punto finale o lunghezza dell'asse minore:
+ Punto finale o lunghezza dell'asse minore:
Specify start angle
@@ -6817,15 +6842,15 @@ Vuoi sostituirlo?
Ellipse Arc with Axis
- Arco d'Ellisse con Assi
+ Arco d'Ellisse con Assi
&Ellipse Arc (Axis)
- &Arco d'Ellisse (Assi)
+ &Arco d'Ellisse (Assi)
Draw Ellipse Arcs
- Disegna Archi d'Ellisse
+ Disegna Archi d'Ellisse
Ellipse with Axis
@@ -6898,8 +6923,8 @@ Vuoi sostituirlo?
Inserisci Immagine (Bitmap)
-
-
+
+
@@ -7117,7 +7142,7 @@ Vuoi sostituirlo?
RS_ActionDrawLineParallel
Specify Distance <%1> or select entity or [Through]
- Distanza <%1> o scegli l'oggetto o [Punto]
+ Distanza <%1> o scegli l'oggetto o [Punto]
Cancel
@@ -7149,7 +7174,7 @@ Vuoi sostituirlo?
Specify Distance <%1> or select entity or [%2]
- Definisci la Distanza <%1> o seleziona l'oggetto o [%2]
+ Definisci la Distanza <%1> o seleziona l'oggetto o [%2]
Concentric
@@ -7164,7 +7189,7 @@ Vuoi sostituirlo?
RS_ActionDrawLineParallelThrough
Select entity
- Scegli l'oggetto
+ Scegli l'oggetto
Cancel
@@ -7238,8 +7263,8 @@ Vuoi sostituirlo?
Disegna poligono con centro ed angolo
-
-
+
+
@@ -7367,7 +7392,7 @@ Vuoi sostituirlo?
Select base entity
- Scegli l'entità di riferimento
+ Scegli l'entità di riferimento
Cancel
@@ -7418,7 +7443,7 @@ Vuoi sostituirlo?
Select circle or arc
- Scegli il cerchio o l'arco
+ Scegli il cerchio o l'arco
Back
@@ -7438,7 +7463,7 @@ Vuoi sostituirlo?
Select circle, arc or ellipse
- Scegli il cerchio, l'arco o l'ellisse
+ Scegli il cerchio, l'arco o l'ellisse
@@ -7539,14 +7564,14 @@ Vuoi sostituirlo?
Undo disallowed due a fatal bug somewhere. Sorry.
-
+
RS_ActionDrawSpline
&Spline
-
+
Specify first control point
@@ -7674,7 +7699,7 @@ Vuoi sostituirlo?
Undoes last action
- Annulla l'ultima azione
+ Annulla l'ultima azione
Redo
@@ -7686,7 +7711,7 @@ Vuoi sostituirlo?
Redoes last action
- Ripeti l'ultima azione
+ Ripeti l'ultima azione
@@ -7705,7 +7730,7 @@ Vuoi sostituirlo?
&New...
-
+
@@ -7789,7 +7814,7 @@ Vuoi sostituirlo?
Measures the angle between two lines
- Misura l'angolo fra due linee
+ Misura l'angolo fra due linee
@@ -7804,7 +7829,7 @@ Vuoi sostituirlo?
Measures the area of a polygon
- Calcola l'area di un poligono
+ Calcola l'area di un poligono
Area: %1
@@ -7925,15 +7950,15 @@ Vuoi sostituirlo?
Point inside contour
- Punto all'interno di un contorno
+ Punto all'interno di un contorno
&Point inside contour
- &Punto all'interno di un contorno
+ &Punto all'interno di un contorno
Checks if a given point is inside the selected contour
- Controlla se un punto dato è all'interno del contorno selezionato
+ Controlla se un punto dato è all'interno del contorno selezionato
@@ -8084,12 +8109,12 @@ Vuoi sostituirlo?
Inserisci un Oggetto dalla libreria delle parti.
-
-
+
+
- Cannot open file '%1'
- Non posso aprire il file '%1'
+ Cannot open file '%1'
+ Non posso aprire il file '%1'
@@ -8177,7 +8202,7 @@ Vuoi sostituirlo?
Cut point is not on entity.
- Il punto di taglio non è sull'oggetto.
+ Il punto di taglio non è sull'oggetto.
Specify entity to cut
@@ -8209,7 +8234,7 @@ Vuoi sostituirlo?
Entity must be a line, arc or circle.
- L'oggetto può essere una linea, un arco o un cerchio.
+ L'oggetto può essere una linea, un arco o un cerchio.
Cutting point is invalid.
@@ -8217,15 +8242,15 @@ Vuoi sostituirlo?
Cutting point is not on entity.
- Il punto per spezzare non è sull'oggetto.
+ Il punto per spezzare non è sull'oggetto.
&Divide
-
+
Entity must be a line, arc, circle or ellipse.
-
+
@@ -8306,7 +8331,7 @@ Vuoi sostituirlo?
RS_ActionModifyDeleteQuick
Pick entity to delete
- Scegli l'oggetto da cancellare
+ Scegli l'oggetto da cancellare
Cancel
@@ -8337,7 +8362,7 @@ Vuoi sostituirlo?
Modify Entity Properties
- Modifica Proprietà dell'Oggetto
+ Modifica Proprietà dell'Oggetto
@@ -8359,7 +8384,7 @@ Vuoi sostituirlo?
RS_ActionModifyMirror
Specify first point of mirror line
- Primo punto per l'asse dello specchio
+ Primo punto per l'asse dello specchio
Cancel
@@ -8367,7 +8392,7 @@ Vuoi sostituirlo?
Specify second point of mirror line
- Secondo punto per l'asse dello specchio
+ Secondo punto per l'asse dello specchio
Back
@@ -8647,7 +8672,7 @@ Vuoi sostituirlo?
Select entity to trim
- Scegli l'oggetto da raccordare
+ Scegli l'oggetto da raccordare
Trim
@@ -8682,11 +8707,11 @@ Vuoi sostituirlo?
The chosen Entity is in a block. Please edit the block.
- L'oggetto scelto è un blocco. Modifica il blocco.
+ L'oggetto scelto è un blocco. Modifica il blocco.
The chosen Entity is not an atomic entity or cannot be trimmed.
- L'oggetto scelto non è un oggetto elementare o non può essere raccordato.
+ L'oggetto scelto non è un oggetto elementare o non può essere raccordato.
Not a valid expression
@@ -8694,7 +8719,7 @@ Vuoi sostituirlo?
Select entity to trim or enter distance:
- Scegli l'oggetto da raccordare o inserisci la distanza:
+ Scegli l'oggetto da raccordare o inserisci la distanza:
Back
@@ -8740,11 +8765,11 @@ Vuoi sostituirlo?
&Add node
-
+
- Add polyline's node
-
+ Add polyline's node
+
No Entity found.
@@ -8752,23 +8777,23 @@ Vuoi sostituirlo?
Entity must be a polyline.
-
+
Adding point is invalid.
-
+
Adding point is not on entity.
-
+
Specify polyline to add nodes
-
+
- Specify adding node's point
-
+ Specify adding node's point
+
@@ -8779,11 +8804,11 @@ Vuoi sostituirlo?
A&ppend node
-
+
- Append polyline's node
-
+ Append polyline's node
+
No Entity found.
@@ -8791,19 +8816,19 @@ Vuoi sostituirlo?
Entity must be a polyline.
-
+
Click somewhere near the beginning or end of existing polyline.
-
+
Specify the polyline somewhere near the beginning or end point
-
+
Specify next point or [%1]
-
+
Back
@@ -8811,7 +8836,7 @@ Vuoi sostituirlo?
Specify next point
-
+
@@ -8826,11 +8851,11 @@ Vuoi sostituirlo?
&Delete node
-
+
- Delete polyline's node
-
+ Delete polyline's node
+
No Entity found.
@@ -8838,23 +8863,23 @@ Vuoi sostituirlo?
Entity must be a polyline.
-
+
Adding point is invalid.
-
+
Adding point is not on entity.
-
+
Specify polyline to delete node
-
+
- Specify deleting node's point
-
+ Specify deleting node's point
+
@@ -8869,7 +8894,7 @@ Vuoi sostituirlo?
Delete &between two nodes
-
+
Delete between two nodes
@@ -8881,42 +8906,42 @@ Vuoi sostituirlo?
Entity must be a polyline.
-
+
Deletinging point is invalid.
-
+
Deleting point is not on entity.
-
+
Deleteinging point is not on entity.
-
+
Specify polyline to delete between two nodes
-
+
Specify first node
-
+
Specify second node
-
+
RS_ActionPolylineEquidistant
Create &Equidistant Polylines
-
+
Create Equidistant Polylines
-
+
No Entity found.
@@ -8924,11 +8949,11 @@ Vuoi sostituirlo?
Entity must be a polyline.
-
+
Choose the original polyline
-
+
Cancel
@@ -8939,11 +8964,11 @@ Vuoi sostituirlo?
RS_ActionPolylineSegment
Create Polyline from Existing &Segments
-
+
Create Polyline from Existing Segments
-
+
No Entity found.
@@ -8951,11 +8976,11 @@ Vuoi sostituirlo?
Entity must be a line or arc.
-
+
Choose one of the segments on the original polyline
-
+
Cancel
@@ -8974,11 +8999,11 @@ Vuoi sostituirlo?
&Trim segments
-
+
- Trim polyline's segments
-
+ Trim polyline's segments
+
No Entity found.
@@ -8986,27 +9011,27 @@ Vuoi sostituirlo?
Entity must be a polyline.
-
+
Specifying point is invalid.
-
+
No Segment found on entity.
-
+
Specify polyline to trim
-
+
Specify first segment
-
+
Specify second segment
-
+
@@ -9021,7 +9046,7 @@ Vuoi sostituirlo?
Shows a preview of a print
- Mostra l'anteprima di una stampa
+ Mostra l'anteprima di una stampa
@@ -9052,14 +9077,14 @@ Vuoi sostituirlo?
Ctrl+K
-
+
RS_ActionSelectContour
Entity must be an Atomic Entity.
- L'oggetto deve essere un oggetto elementare.
+ L'oggetto deve essere un oggetto elementare.
(De-)Select Contour
@@ -10015,7 +10040,7 @@ Vuoi sostituirlo?
ln
-
+
l
@@ -10088,7 +10113,7 @@ Vuoi sostituirlo?
ld
-
+ qp
tm
@@ -10132,7 +10157,7 @@ Vuoi sostituirlo?
oo
-
+ oo
uu
@@ -10160,7 +10185,7 @@ Vuoi sostituirlo?
sn
-
+
sm
@@ -10176,20 +10201,20 @@ Vuoi sostituirlo?
kill
-
+
k
-
+
back
-
+
b
back
-
+
diff --git a/ts/librecad_ja.ts b/ts/librecad_ja.ts
index e13ab64794..7cf0420719 100644
--- a/ts/librecad_ja.ts
+++ b/ts/librecad_ja.ts
@@ -278,10 +278,6 @@ Auto-save disabled.
SVN Revision: %1
-
- Date: %1
-
-
Modules: %1
@@ -294,6 +290,26 @@ Auto-save disabled.
Bugger, I couldn't find the helpfiles on the filesystem.
+
+ &Toolbars
+
+
+
+ Compiled on: %1
+
+
+
+ Program Icons Supplied by
+
+
+
+ Splash and Logo supplied by
+
+
+
+ Main Website :
+
+
QC_MDIWindow
@@ -4791,11 +4807,11 @@ Do you want to replace it?
- Loading Library Paths..
+ Loading File %1..
- Loading File %1..
+ Loading...
diff --git a/ts/librecad_nl.ts b/ts/librecad_nl.ts
index 2796171445..67ad82d5be 100644
--- a/ts/librecad_nl.ts
+++ b/ts/librecad_nl.ts
@@ -1,7 +1,8 @@
+
-
+
Loading..
Bezig met laden...
@@ -275,8 +276,8 @@ Datum: %1
Comando Regel
- Block '%1'
- Blok '%1'
+ Block '%1'
+ Blok '%1'
Cannot open the file
@@ -332,7 +333,7 @@ Controleer de toegangsrechten.
Date: %1
- Datum: %1
+ Datum: %1
This is a %1 version which terminates
@@ -357,12 +358,12 @@ U kunt nu uw werk bewaren.
&Spline
- Running script '%1'
+ Running script '%1'
Huidige script %1
- Inserting block '%1'
- Blok '%1' wordt toegevoegd
+ Inserting block '%1'
+ Blok '%1' wordt toegevoegd
&Polyline
@@ -400,16 +401,36 @@ Auto-save disabled.
Help
- Bugger, I couldn't find the helpfiles on the filesystem.
+ Bugger, I couldn't find the helpfiles on the filesystem.
Help bestanden konden niet worden gevonden.
&Plugins
-
+
Import
-
+
+
+
+ &Toolbars
+
+
+
+ Compiled on: %1
+
+
+
+ Program Icons Supplied by
+
+
+
+ Splash and Logo supplied by
+
+
+
+ Main Website :
+
@@ -1921,7 +1942,7 @@ Auto-save disabled.
&back
-
+
@@ -1992,8 +2013,8 @@ Auto-save disabled.
Blok aan het herbenoemen
- Could not name block. A block named "%1" already exists.
- Kon blok niet benoemen. Er bestaat al een blok genaamd "%1".
+ Could not name block. A block named "%1" already exists.
+ Kon blok niet benoemen. Er bestaat al een blok genaamd "%1".
&OK
@@ -2317,48 +2338,48 @@ in een separate Venster
Hoofd
- Show menu "Lines"
- Toon menu "Lijnen"
+ Show menu "Lines"
+ Toon menu "Lijnen"
- Show menu "Arcs"
- Toon menu "Bogen"
+ Show menu "Arcs"
+ Toon menu "Bogen"
- Show menu "Circles"
- Toon menu "Cirkels"
+ Show menu "Circles"
+ Toon menu "Cirkels"
- Show menu "Points"
- Toon menu "Punten"
+ Show menu "Points"
+ Toon menu "Punten"
- Show menu "Measure"
- Toon menu "Meten"
+ Show menu "Measure"
+ Toon menu "Meten"
- Show menu "Ellipses"
- Toon menu "Ovalen"
+ Show menu "Ellipses"
+ Toon menu "Ovalen"
Hatches / Solid Fills
Arceringen / Inkleuringen
- Show menu "Edit"
- Toon menu "Bewerken"
+ Show menu "Edit"
+ Toon menu "Bewerken"
- Show menu "Dimensions"
- Toon menu "Bematen"
+ Show menu "Dimensions"
+ Toon menu "Bematen"
Texts
Tekst
- Show menu "Select"
- Toon menu "Selecteer"
+ Show menu "Select"
+ Toon menu "Selecteer"
Create Block
@@ -3144,12 +3165,12 @@ in een separate Venster
Welcom
- <font size="+1"><b>Welcome to QCad</b>
+ <font size="+1"><b>Welcome to QCad</b>
</font>
<br>
Please choose the unit you want to use for new drawings and your preferred language.<br>
You can changes these settings later in the Options Dialog of QCad.
- <font size="+1"><b>Welcom by QCad</b>
+ <font size="+1"><b>Welcom by QCad</b>
</font>
<br>
U kunt nu de eenheid kiezen voor nieuwe tekeningen en uw voorkeurstaal <br>
@@ -3518,7 +3539,7 @@ U kunt deze instellingen later wijzigen in de Opties Dialog van QCad.Graden
- Surveyor's units
+ Surveyor's units
Te meten eenheid
@@ -3526,8 +3547,8 @@ U kunt deze instellingen later wijzigen in de Opties Dialog van QCad.Opties
- For the length formats 'Engineering' and 'Architectural', the unit must be set to Inch.
- Voor de lengte formaten 'Werktuigbouw' en 'Bouwkunde' moet de eenheid naar Inch worden gezet.
+ For the length formats 'Engineering' and 'Architectural', the unit must be set to Inch.
+ Voor de lengte formaten 'Werktuigbouw' en 'Bouwkunde' moet de eenheid naar Inch worden gezet.
Extension line extension:
@@ -5819,12 +5840,12 @@ U kunt deze instellingen later wijzigen in de Opties Dialog van QCad.Wis Laag
- Layer "%1" and all entities on it will be removed.
- Laag "%1" en alle elementen daarop worden verwijderd.
+ Layer "%1" and all entities on it will be removed.
+ Laag "%1" en alle elementen daarop worden verwijderd.
- Layer "%1" can never be removed.
- Laag "%1" kan niet worden verwijderd.
+ Layer "%1" can never be removed.
+ Laag "%1" kan niet worden verwijderd.
Layer Dialog
@@ -5835,16 +5856,16 @@ U kunt deze instellingen later wijzigen in de Opties Dialog van QCad.Wis Blok
- Block "%1" and all its entities will be removed.
- Blok "%1" en alle elementen daarop worden verwijderd.
+ Block "%1" and all its entities will be removed.
+ Blok "%1" en alle elementen daarop worden verwijderd.
Layer Properties
Laag Eigenschappen
- Layer with a name "%1" already exists. Please specify a different name.
- De Laag met naam "%1" bestaat. Kies een andere naam.
+ Layer with a name "%1" already exists. Please specify a different name.
+ De Laag met naam "%1" bestaat. Kies een andere naam.
@@ -6033,12 +6054,16 @@ Wilt u het vervangen?
Loading Library Paths..
- Bibliotheek paden worden geladen..
+ Bibliotheek paden worden geladen..
Loading File %1..
Bezig met laden van bestand %1..
+
+ Loading...
+
+
RS_ActionBlocksAdd
@@ -6185,8 +6210,8 @@ Wilt u het vervangen?
&Plaats Blok
-
-
+
+
@@ -6866,8 +6891,8 @@ Wilt u het vervangen?
Voeg Afbeelding (Bitmap) in
-
-
+
+
@@ -7206,8 +7231,8 @@ Wilt u het vervangen?
Teken veelhoek met center en hoekpunt
-
-
+
+
@@ -8060,12 +8085,12 @@ Wilt u het vervangen?
Voegt een Object uit de Onderdeel Bibliotheek in.
-
-
+
+
- Cannot open file '%1'
- Kan bestand '%1' niet openen
+ Cannot open file '%1'
+ Kan bestand '%1' niet openen
@@ -8719,7 +8744,7 @@ Wilt u het vervangen?
&Voeg node toe
- Add polyline's node
+ Add polyline's node
Voeg knooppunt toe aan vrije vorm
@@ -8743,7 +8768,7 @@ Wilt u het vervangen?
Geef aan vrije vorm om knooppunten toe te voegen
- Specify adding node's point
+ Specify adding node's point
Geef toe te voegen knooppunt
@@ -8758,7 +8783,7 @@ Wilt u het vervangen?
Knoo&ppunt toevoegen
- Append polyline's node
+ Append polyline's node
Voeg vrije vorm knooppunt
@@ -8805,7 +8830,7 @@ Wilt u het vervangen?
&Verwijder knooppunt
- Delete polyline's node
+ Delete polyline's node
Verwijderen knooppunt uit vrije vorm
@@ -8829,7 +8854,7 @@ Wilt u het vervangen?
Geef vrije vorm om knooppunt te verwijderen
- Specify deleting node's point
+ Specify deleting node's point
Geef de te verwijderen knoop punt
@@ -8953,7 +8978,7 @@ Wilt u het vervangen?
&Knip Segmenten
- Trim polyline's segments
+ Trim polyline's segments
Knip uit vrije vorm segmenten
@@ -9708,7 +9733,7 @@ Wilt u het vervangen?
Available commands:
- Beschikbare commando's:
+ Beschikbare commando's:
ln
@@ -10152,20 +10177,20 @@ Wilt u het vervangen?
kill
-
+
k
-
+
back
-
+
b
back
-
+
diff --git a/ts/librecad_no.ts b/ts/librecad_no.ts
index 36b3afb1a1..9ee2de7a81 100644
--- a/ts/librecad_no.ts
+++ b/ts/librecad_no.ts
@@ -229,7 +229,7 @@ Please check the permissions.
Date: %1
- Dato: %1
+ Dato: %1
&Window
@@ -294,6 +294,26 @@ Auto-save disabled.
Import
+
+ &Toolbars
+
+
+
+ Compiled on: %1
+
+
+
+ Program Icons Supplied by
+
+
+
+ Splash and Logo supplied by
+
+
+
+ Main Website :
+
+
QC_MDIWindow
@@ -4436,11 +4456,11 @@ Do you want to replace it?
- Loading Library Paths..
+ Loading File %1..
- Loading File %1..
+ Loading...
diff --git a/ts/librecad_pa.ts b/ts/librecad_pa.ts
index 516189a0ec..6d2e52a9c6 100644
--- a/ts/librecad_pa.ts
+++ b/ts/librecad_pa.ts
@@ -1,3 +1,4 @@
+
@@ -227,8 +228,8 @@
ਕਮਾਂਡ ਲਾਇਨ
- Block '%1'
- ਬਲਾਕ '%1'
+ Block '%1'
+ ਬਲਾਕ '%1'
Cannot open the file
@@ -280,7 +281,7 @@ Please check the permissions.
Date: %1
- ਮਿਤੀ: %1
+ ਮਿਤੀ: %1
This is a %1 version which terminates
@@ -305,12 +306,12 @@ You can save your work now.
ਸਪਲਾਈਨ(&S)
- Running script '%1'
- '%1' ਸਕ੍ਰਿਪਟ ਚਲਾਈ ਜਾ ਰਹੀ ਹੈ
+ Running script '%1'
+ '%1' ਸਕ੍ਰਿਪਟ ਚਲਾਈ ਜਾ ਰਹੀ ਹੈ
- Inserting block '%1'
- ਬਲਾਕ '%1' ਸ਼ਾਮਿਲ ਕੀਤਾ ਜਾ ਰਿਹਾ ਹੈ
+ Inserting block '%1'
+ ਬਲਾਕ '%1' ਸ਼ਾਮਿਲ ਕੀਤਾ ਜਾ ਰਿਹਾ ਹੈ
&Polyline
@@ -318,46 +319,66 @@ You can save your work now.
CTRL+M
-
+
Insert Image
-
+
Auto-saving drawing...
-
+
Auto-saved drawing
-
+
Cannot auto-save the file
%1
Please check the permissions.
Auto-save disabled.
-
+
SVN Revision: %1
-
+
Help
-
+
- Bugger, I couldn't find the helpfiles on the filesystem.
-
+ Bugger, I couldn't find the helpfiles on the filesystem.
+
&Plugins
-
+
Import
-
+
+
+
+ &Toolbars
+
+
+
+ Compiled on: %1
+
+
+
+ Program Icons Supplied by
+
+
+
+ Splash and Logo supplied by
+
+
+
+ Main Website :
+
@@ -421,19 +442,19 @@ Auto-save disabled.
Snap to endpoints
- ਅੰਤ-ਬਿੰਦੂ 'ਤੇ ਸਨੈਪ
+ ਅੰਤ-ਬਿੰਦੂ 'ਤੇ ਸਨੈਪ
On Entity
- ਇਕਾਈ 'ਤੇ
+ ਇਕਾਈ 'ਤੇ
&On Entity
- ਇਕਾਈ 'ਤੇ(&O)
+ ਇਕਾਈ 'ਤੇ(&O)
Snap to nearest point on entity
- ਇਕਾਈ ਦੇ ਨੇੜਲੇ ਬਿੰਦੂ 'ਤੇ ਸਨੈਪ
+ ਇਕਾਈ ਦੇ ਨੇੜਲੇ ਬਿੰਦੂ 'ਤੇ ਸਨੈਪ
Center
@@ -445,7 +466,7 @@ Auto-save disabled.
Snap to centers
- ਕੇਂਦਰਾਂ 'ਤੇ ਸਨੈਪ
+ ਕੇਂਦਰਾਂ 'ਤੇ ਸਨੈਪ
Middle
@@ -457,7 +478,7 @@ Auto-save disabled.
Snap to middle points
- ਮੱਧ ਬਿੰਦੂਆਂ 'ਤੇ ਸਨੈਪ
+ ਮੱਧ ਬਿੰਦੂਆਂ 'ਤੇ ਸਨੈਪ
Distance from Endpoint
@@ -469,7 +490,7 @@ Auto-save disabled.
Snap to points with a given distance to an endpoint
- ਇੱਕ ਅੰਤ-ਬਿੰਦੂ ਤੋਂ ਇੱਕ ਦਿੱਤੀ ਦੂਰੀ ਨਾਲ ਬਿੰਦੂ 'ਤੇ ਸਨੈਪ
+ ਇੱਕ ਅੰਤ-ਬਿੰਦੂ ਤੋਂ ਇੱਕ ਦਿੱਤੀ ਦੂਰੀ ਨਾਲ ਬਿੰਦੂ 'ਤੇ ਸਨੈਪ
Intersection
@@ -641,15 +662,15 @@ Auto-save disabled.
CTRL-G
-
+
Restrict&Vertically
-
+
&back
-
+
@@ -720,8 +741,8 @@ Auto-save disabled.
ਬਲਾਕ ਨਾਂ-ਤਬਦੀਲ
- Could not name block. A block named "%1" already exists.
- ਨਾਂ ਬਲਾਕ ਨਹੀ ਹੋ ਸਕਿਆ। ਬਲਾਕ ਨਾਂ "%1" ਪਹਿਲਾਂ ਹੀ ਮੌਜੂਦ ਹੈ।
+ Could not name block. A block named "%1" already exists.
+ ਨਾਂ ਬਲਾਕ ਨਹੀ ਹੋ ਸਕਿਆ। ਬਲਾਕ ਨਾਂ "%1" ਪਹਿਲਾਂ ਹੀ ਮੌਜੂਦ ਹੈ।
&OK
@@ -832,7 +853,7 @@ in a separate window
Back to main menu
- ਮੁੱਖ ਮੇਨੂ 'ਤੇ ਵਾਪਿਸ
+ ਮੁੱਖ ਮੇਨੂ 'ਤੇ ਵਾਪਿਸ
Concentric
@@ -867,7 +888,7 @@ in a separate window
Back to main menu
- ਮੁੱਖ ਮੇਨੂ 'ਤੇ ਵਾਪਿਸ
+ ਮੁੱਖ ਮੇਨੂ 'ਤੇ ਵਾਪਿਸ
Concentric
@@ -882,7 +903,7 @@ in a separate window
Back to main menu
- ਮੁੱਖ ਮੇਨੂ 'ਤੇ ਵਾਪਿਸ
+ ਮੁੱਖ ਮੇਨੂ 'ਤੇ ਵਾਪਿਸ
Diametric Dimension
@@ -933,7 +954,7 @@ in a separate window
Back to main menu
- ਮੁੱਖ ਮੇਨੂ 'ਤੇ ਵਾਪਿਸ
+ ਮੁੱਖ ਮੇਨੂ 'ਤੇ ਵਾਪਿਸ
@@ -944,7 +965,7 @@ in a separate window
Back to main menu
- ਮੁੱਖ ਮੇਨੂ 'ਤੇ ਵਾਪਿਸ
+ ਮੁੱਖ ਮੇਨੂ 'ਤੇ ਵਾਪਿਸ
Distance (Point, Point)
@@ -983,7 +1004,7 @@ in a separate window
Back to main menu
- ਮੁੱਖ ਮੇਨੂ 'ਤੇ ਵਾਪਿਸ
+ ਮੁੱਖ ਮੇਨੂ 'ਤੇ ਵਾਪਿਸ
Bisectors
@@ -1045,44 +1066,44 @@ in a separate window
ਮੁੱਖ
- Show menu "Lines"
- "ਰੇਖਾਵਾਂ" ਮੇਨੂ ਵੇਖਾਓ
+ Show menu "Lines"
+ "ਰੇਖਾਵਾਂ" ਮੇਨੂ ਵੇਖਾਓ
- Show menu "Arcs"
- "ਚਾਪਾਂ" ਮੇਨੂ ਵੇਖਾਓ
+ Show menu "Arcs"
+ "ਚਾਪਾਂ" ਮੇਨੂ ਵੇਖਾਓ
- Show menu "Circles"
- "ਚੱਕਰ" ਮੇਨੂ ਵੇਖਾਓ
+ Show menu "Circles"
+ "ਚੱਕਰ" ਮੇਨੂ ਵੇਖਾਓ
- Show menu "Measure"
- "ਮਾਪਕ" ਮੇਨੂ ਵੇਖਾਓ
+ Show menu "Measure"
+ "ਮਾਪਕ" ਮੇਨੂ ਵੇਖਾਓ
- Show menu "Ellipses"
- "ਅੰਡਾਕਾਰ" ਮੇਨੂ ਵੇਖਾਓ
+ Show menu "Ellipses"
+ "ਅੰਡਾਕਾਰ" ਮੇਨੂ ਵੇਖਾਓ
Hatches / Solid Fills
ਮੋਘਾ / ਗੂੜਾ ਭਰੋ
- Show menu "Edit"
- "ਸੋਧ" ਮੇਨੂ ਵੇਖਾਓ
+ Show menu "Edit"
+ "ਸੋਧ" ਮੇਨੂ ਵੇਖਾਓ
- Show menu "Dimensions"
- "ਮਾਪ" ਮੇਨੂ ਵੇਖਾਓ
+ Show menu "Dimensions"
+ "ਮਾਪ" ਮੇਨੂ ਵੇਖਾਓ
Texts
ਪਾਠ
- Show menu "Select"
- "ਚੋਣ" ਮੇਨੂ ਵੇਖਾਓ
+ Show menu "Select"
+ "ਚੋਣ" ਮੇਨੂ ਵੇਖਾਓ
Create Block
@@ -1113,7 +1134,7 @@ in a separate window
Back to main menu
- ਮੁੱਖ ਮੇਨੂ 'ਤੇ ਵਾਪਿਸ
+ ਮੁੱਖ ਮੇਨੂ 'ਤੇ ਵਾਪਿਸ
Rotate
@@ -1200,7 +1221,7 @@ in a separate window
Back to main menu
- ਮੁੱਖ ਮੇਨੂ 'ਤੇ ਵਾਪਿਸ
+ ਮੁੱਖ ਮੇਨੂ 'ਤੇ ਵਾਪਿਸ
Single points
@@ -1215,7 +1236,7 @@ in a separate window
Back to main menu
- ਮੁੱਖ ਮੇਨੂ 'ਤੇ ਵਾਪਿਸ
+ ਮੁੱਖ ਮੇਨੂ 'ਤੇ ਵਾਪਿਸ
Create Polyline
@@ -1254,7 +1275,7 @@ in a separate window
Back to main menu
- ਮੁੱਖ ਮੇਨੂ 'ਤੇ ਵਾਪਿਸ
+ ਮੁੱਖ ਮੇਨੂ 'ਤੇ ਵਾਪਿਸ
Select intersected entities
@@ -1305,11 +1326,11 @@ in a separate window
Back to main menu
- ਮੁੱਖ ਮੇਨੂ 'ਤੇ ਵਾਪਿਸ
+ ਮੁੱਖ ਮੇਨੂ 'ਤੇ ਵਾਪਿਸ
Snap to grid
- ਗਰਿੱਡ 'ਤੇ ਸਨੈਪ
+ ਗਰਿੱਡ 'ਤੇ ਸਨੈਪ
Free positioning
@@ -1317,23 +1338,23 @@ in a separate window
Snap to Endpoints
- ਅੰਤ-ਬਿੰਦੂਆਂ 'ਤੇ ਸਨੈਪ
+ ਅੰਤ-ਬਿੰਦੂਆਂ 'ਤੇ ਸਨੈਪ
Snap to closest point on entity
- ਇਕਾਈ 'ਤੇ ਨੇੜਲੇ ਬਿੰਦੂ 'ਤੇ ਸਨੈਪ
+ ਇਕਾਈ 'ਤੇ ਨੇੜਲੇ ਬਿੰਦੂ 'ਤੇ ਸਨੈਪ
Snap to center points
- ਕੇਂਦਰੀ ਬਿੰਦੂਆਂ 'ਤੇ ਸਨੈਪ
+ ਕੇਂਦਰੀ ਬਿੰਦੂਆਂ 'ਤੇ ਸਨੈਪ
Snap to middle points
- ਮੱਧ ਬਿੰਦੂਆਂ 'ਤੇ ਸਨੈਪ
+ ਮੱਧ ਬਿੰਦੂਆਂ 'ਤੇ ਸਨੈਪ
Snap to point with given distance to endpoint
- ਅੰਤ-ਬਿੰਦੂ ਤੋਂ ਇੱਕ ਦਿੱਤੀ ਦੂਰੀ ਨਾਲ ਬਿੰਦੂ 'ਤੇ ਸਨੈਪ
+ ਅੰਤ-ਬਿੰਦੂ ਤੋਂ ਇੱਕ ਦਿੱਤੀ ਦੂਰੀ ਨਾਲ ਬਿੰਦੂ 'ਤੇ ਸਨੈਪ
Snap to intersections automatically
@@ -1376,7 +1397,7 @@ in a separate window
Back to main menu
- ਮੁੱਖ ਮੇਨੂ 'ਤੇ ਵਾਪਿਸ
+ ਮੁੱਖ ਮੇਨੂ 'ਤੇ ਵਾਪਿਸ
Spline
@@ -1514,7 +1535,7 @@ in a separate window
...
-
+
@@ -1860,12 +1881,12 @@ in a separate window
ਜੀ ਆਇਆਂ ਨੂੰ
- <font size="+1"><b>Welcome to QCad</b>
+ <font size="+1"><b>Welcome to QCad</b>
</font>
<br>
Please choose the unit you want to use for new drawings and your preferred language.<br>
You can changes these settings later in the Options Dialog of QCad.
- <font size="+1"><b>QCad ਵਲੋਂ ਜੀ ਆਇਆਂ ਨੂੰ</b>(new line)
+ <font size="+1"><b>QCad ਵਲੋਂ ਜੀ ਆਇਆਂ ਨੂੰ</b>(new line)
</font>(new line)
<br>(new line)
ਕਿਰਪਾ ਕਰਕੇ ਨਵੀਂ ਡਰਾਇੰਗ ਲਈ ਵਰਤਣ ਲਈ ਇਕਾਈਆਂ ਅਤੇ ਆਪਣੀ ਪਸੰਦੀਦਾ ਭਾਸ਼ਾ ਦੀ ਚੋਣ ਕਰੋ।<br>(new line)
@@ -2034,7 +2055,7 @@ You can changes these settings later in the Options Dialog of QCad.
...
-
+
@@ -2085,7 +2106,7 @@ You can changes these settings later in the Options Dialog of QCad.
...
-
+
@@ -2136,11 +2157,11 @@ You can changes these settings later in the Options Dialog of QCad.
...
-
+
Ctrl+S
-
+
@@ -2234,7 +2255,7 @@ You can changes these settings later in the Options Dialog of QCad.
ਗਰੇਡੀਐਂਟ
- Surveyor's units
+ Surveyor's units
ਸਰਵੇਅਰ ਦੀਆਂ ਇਕਾਈਆਂ
@@ -2242,8 +2263,8 @@ You can changes these settings later in the Options Dialog of QCad.
ਚੋਣ
- For the length formats 'Engineering' and 'Architectural', the unit must be set to Inch.
- 'ਇੰਜਨੀਅਰਗ' ਅਤੇ 'ਆਰਚੀਟੈਕਚਰਕਲ' ਲੰਬਾਈ ਫਾਰਮਿਟ ਲਈ ਇਕਾਈ ਇੰਚ ਹੀ ਹੋਣੀ ਚਾਹੀਦੀ ਹੈ।
+ For the length formats 'Engineering' and 'Architectural', the unit must be set to Inch.
+ 'ਇੰਜਨੀਅਰਗ' ਅਤੇ 'ਆਰਚੀਟੈਕਚਰਕਲ' ਲੰਬਾਈ ਫਾਰਮਿਟ ਲਈ ਇਕਾਈ ਇੰਚ ਹੀ ਹੋਣੀ ਚਾਹੀਦੀ ਹੈ।
Extension line extension:
@@ -2626,34 +2647,34 @@ You can changes these settings later in the Options Dialog of QCad.
Program Defaults
-
+
Time between automatc saving of thedocument in minutes.
-
+
Auto save time:
-
+
QG_DlgOptionsVariables
Drawing Variables
-
+
Variable
-
+
Code
-
+
Value
-
+
&OK
@@ -2755,7 +2776,7 @@ You can changes these settings later in the Options Dialog of QCad.
...
-
+
@@ -2806,7 +2827,7 @@ You can changes these settings later in the Options Dialog of QCad.
...
-
+
@@ -2857,7 +2878,7 @@ You can changes these settings later in the Options Dialog of QCad.
...
-
+
@@ -3554,7 +3575,7 @@ You can changes these settings later in the Options Dialog of QCad.
again Still No Text supplied.
-
+
@@ -4160,7 +4181,7 @@ You can changes these settings later in the Options Dialog of QCad.
...
-
+
@@ -4178,7 +4199,7 @@ You can changes these settings later in the Options Dialog of QCad.
QG_PolylineOptions
Polyline Options
-
+
Close
@@ -4186,7 +4207,7 @@ You can changes these settings later in the Options Dialog of QCad.
Undo
-
+
Line
@@ -4194,11 +4215,11 @@ You can changes these settings later in the Options Dialog of QCad.
Tangential
-
+
Tan Radius
-
+
Angle
@@ -4491,12 +4512,12 @@ You can changes these settings later in the Options Dialog of QCad.
ਪਰਤ ਹਟਾਓ
- Layer "%1" and all entities on it will be removed.
- ਪਰਤ "%1" ਅਤੇ ਇਸ ਦੀਆਂ ਸਭ ਇਕਾਈਆਂ ਨੂੰ ਹਟਾ ਦਿੱਤਾ ਜਾਵੇਗਾ।
+ Layer "%1" and all entities on it will be removed.
+ ਪਰਤ "%1" ਅਤੇ ਇਸ ਦੀਆਂ ਸਭ ਇਕਾਈਆਂ ਨੂੰ ਹਟਾ ਦਿੱਤਾ ਜਾਵੇਗਾ।
- Layer "%1" can never be removed.
- ਪਰਤ "%1" ਨੂੰ ਕਦੇ ਵੀ ਹਟਾਇਆ ਨਹੀਂ ਜਾ ਸਕਦਾ ਹੈ।
+ Layer "%1" can never be removed.
+ ਪਰਤ "%1" ਨੂੰ ਕਦੇ ਵੀ ਹਟਾਇਆ ਨਹੀਂ ਜਾ ਸਕਦਾ ਹੈ।
Layer Dialog
@@ -4507,16 +4528,16 @@ You can changes these settings later in the Options Dialog of QCad.
ਬਲਾਕ ਹਟਾਓ
- Block "%1" and all its entities will be removed.
- ਬਲਾਕ "%1" ਅਤੇ ਇਸ ਦੀਆਂ ਸਭ ਇਕਾਈਆਂ ਨੂੰ ਹਟਾ ਦਿੱਤਾ ਜਾਵੇਗਾ।
+ Block "%1" and all its entities will be removed.
+ ਬਲਾਕ "%1" ਅਤੇ ਇਸ ਦੀਆਂ ਸਭ ਇਕਾਈਆਂ ਨੂੰ ਹਟਾ ਦਿੱਤਾ ਜਾਵੇਗਾ।
Layer Properties
ਪਰਤ ਗੁਣ
- Layer with a name "%1" already exists. Please specify a different name.
- "%1" ਨਾਂ ਨਾਲ ਪਰਤ ਪਹਿਲਾਂ ਹੀ ਮੌਜੂਦ ਹੈ। ਕਿਰਪਾ ਕਰਕੇ ਵੱਖਰਾ ਨਾਂ ਦਿਓ।
+ Layer with a name "%1" already exists. Please specify a different name.
+ "%1" ਨਾਂ ਨਾਲ ਪਰਤ ਪਹਿਲਾਂ ਹੀ ਮੌਜੂਦ ਹੈ। ਕਿਰਪਾ ਕਰਕੇ ਵੱਖਰਾ ਨਾਂ ਦਿਓ।
@@ -4621,7 +4642,7 @@ Do you want to replace it?
Loading Library Paths..
- ਲਾਇਬ੍ਰੇਰੀ ਮਾਰਗ ਲੋਡ ਕੀਤਾ ਜਾ ਰਿਹਾ ਹੈ..
+ ਲਾਇਬ੍ਰੇਰੀ ਮਾਰਗ ਲੋਡ ਕੀਤਾ ਜਾ ਰਿਹਾ ਹੈ..
Loading File %1..
@@ -4633,83 +4654,87 @@ Do you want to replace it?
Inch
-
+
Foot
-
+
Mile
-
+
Millimeter
-
+
Centimeter
-
+
Meter
-
+
Kilometer
-
+
Microinch
-
+
Mil
-
+
Yard
-
+
Angstrom
-
+
Nanometer
-
+
Micron
-
+
Decimeter
-
+
Decameter
-
+
Hectometer
-
+
Gigameter
-
+
Astro
-
+
Lightyear
-
+
Parsec
-
+
+
+
+ Loading...
+
@@ -4837,8 +4862,8 @@ Do you want to replace it?
ਕੋਣ ਦਿਓ:
-
-
+
+
Enter factor:
@@ -5534,8 +5559,8 @@ Do you want to replace it?
ਕੋਣ ਦਿਓ:
-
-
+
+
Enter factor:
@@ -5858,8 +5883,8 @@ Do you want to replace it?
ਕੇਂਦਰ ਦਿਓ
-
-
+
+
Specify a corner
@@ -6092,7 +6117,7 @@ Do you want to replace it?
Draw polylines
-
+
Specify first point
@@ -6120,11 +6145,11 @@ Do you want to replace it?
Undo disallowed due a fatal bug somewhere. Sorry.
-
+
Cannot undo: Not enough entities defined yet.
-
+
@@ -6298,7 +6323,7 @@ Do you want to replace it?
&New...
-
+
@@ -6673,16 +6698,16 @@ Do you want to replace it?
ਕੋਣ ਦਿਓ:
-
-
+
+
Enter factor:
ਫੈਕਟਰ ਦਿਓ:
- Cannot open file '%1'
- ਫਾਇਲ '%1' ਨੂੰ ਖੋਲਿਆ ਨਹੀ ਜਾ ਸਕਦਾ ਹੈ
+ Cannot open file '%1'
+ ਫਾਇਲ '%1' ਨੂੰ ਖੋਲਿਆ ਨਹੀ ਜਾ ਸਕਦਾ ਹੈ
@@ -6806,11 +6831,11 @@ Do you want to replace it?
&Divide
-
+
Entity must be a line, arc, circle or ellipse.
-
+
@@ -7305,11 +7330,11 @@ Do you want to replace it?
RS_ActionPolylineAdd
&Add node
-
+
- Add polyline's node
-
+ Add polyline's node
+
No Entity found.
@@ -7317,27 +7342,27 @@ Do you want to replace it?
Entity must be a polyline.
-
+
Adding point is invalid.
-
+
Adding point is not on entity.
-
+
Specify polyline to add nodes
-
+
Cancel
ਰੱਦ ਕਰੋ
- Specify adding node's point
-
+ Specify adding node's point
+
Back
@@ -7348,11 +7373,11 @@ Do you want to replace it?
RS_ActionPolylineAppend
A&ppend node
-
+
- Append polyline's node
-
+ Append polyline's node
+
No Entity found.
@@ -7360,15 +7385,15 @@ Do you want to replace it?
Entity must be a polyline.
-
+
Click somewhere near the beginning or end of existing polyline.
-
+
Specify the polyline somewhere near the beginning or end point
-
+
Cancel
@@ -7391,11 +7416,11 @@ Do you want to replace it?
RS_ActionPolylineDel
&Delete node
-
+
- Delete polyline's node
-
+ Delete polyline's node
+
No Entity found.
@@ -7403,27 +7428,27 @@ Do you want to replace it?
Entity must be a polyline.
-
+
Adding point is invalid.
-
+
Adding point is not on entity.
-
+
Specify polyline to delete node
-
+
Cancel
ਰੱਦ ਕਰੋ
- Specify deleting node's point
-
+ Specify deleting node's point
+
Back
@@ -7434,7 +7459,7 @@ Do you want to replace it?
RS_ActionPolylineDelBetween
Delete &between two nodes
-
+
Delete between two nodes
@@ -7446,23 +7471,23 @@ Do you want to replace it?
Entity must be a polyline.
-
+
Deletinging point is invalid.
-
+
Deleting point is not on entity.
-
+
Deleteinging point is not on entity.
-
+
Specify polyline to delete between two nodes
-
+
Cancel
@@ -7470,7 +7495,7 @@ Do you want to replace it?
Specify first node
-
+
Back
@@ -7478,18 +7503,18 @@ Do you want to replace it?
Specify second node
-
+
RS_ActionPolylineEquidistant
Create &Equidistant Polylines
-
+
Create Equidistant Polylines
-
+
No Entity found.
@@ -7497,11 +7522,11 @@ Do you want to replace it?
Entity must be a polyline.
-
+
Choose the original polyline
-
+
Cancel
@@ -7512,11 +7537,11 @@ Do you want to replace it?
RS_ActionPolylineSegment
Create Polyline from Existing &Segments
-
+
Create Polyline from Existing Segments
-
+
No Entity found.
@@ -7524,11 +7549,11 @@ Do you want to replace it?
Entity must be a line or arc.
-
+
Choose one of the segments on the original polyline
-
+
Cancel
@@ -7539,11 +7564,11 @@ Do you want to replace it?
RS_ActionPolylineTrim
&Trim segments
-
+
- Trim polyline's segments
-
+ Trim polyline's segments
+
No Entity found.
@@ -7551,19 +7576,19 @@ Do you want to replace it?
Entity must be a polyline.
-
+
Specifying point is invalid.
-
+
No Segment found on entity.
-
+
Specify polyline to trim
-
+
Cancel
@@ -7571,7 +7596,7 @@ Do you want to replace it?
Specify first segment
-
+
Back
@@ -7579,7 +7604,7 @@ Do you want to replace it?
Specify second segment
-
+
@@ -7625,7 +7650,7 @@ Do you want to replace it?
Ctrl+K
-
+
@@ -8887,7 +8912,7 @@ parallel
sn
-
+
sm
@@ -8909,20 +8934,20 @@ parallel
kill
-
+
k
-
+
back
-
+
b
back
-
+
diff --git a/ts/librecad_pl.ts b/ts/librecad_pl.ts
index 901e2a9f27..69a1606dae 100644
--- a/ts/librecad_pl.ts
+++ b/ts/librecad_pl.ts
@@ -1,3 +1,4 @@
+
@@ -282,8 +283,8 @@ Możesz teraz jedynie zapisać swoją pracę.
Sterowanie symulacją
- Block '%1'
- Blok '%1'
+ Block '%1'
+ Blok '%1'
Cannot open the file
@@ -319,7 +320,7 @@ Proszę sprawdzić prawa do zapisu.
Date: %1
- Data: %1
+ Data: %1
This is a %1 version which terminates
@@ -346,12 +347,12 @@ Możesz teraz zapisać Twoją pracę.
&Krzywa składana
- Running script '%1'
- Uruchamianie skryptu '%1'
+ Running script '%1'
+ Uruchamianie skryptu '%1'
- Inserting block '%1'
- Wstawianie bloku '%1'
+ Inserting block '%1'
+ Wstawianie bloku '%1'
&Polyline
@@ -392,16 +393,36 @@ Autozapis wyłączony.
Pomoc
- Bugger, I couldn't find the helpfiles on the filesystem.
+ Bugger, I couldn't find the helpfiles on the filesystem.
Kurde, nie mogę odnaleźć plików pomocy.
&Plugins
-
+
Import
-
+
+
+
+ &Toolbars
+
+
+
+ Compiled on: %1
+
+
+
+ Program Icons Supplied by
+
+
+
+ Splash and Logo supplied by
+
+
+
+ Main Website :
+
@@ -1917,7 +1938,7 @@ Autozapis wyłączony.
&back
-
+
@@ -1988,8 +2009,8 @@ Autozapis wyłączony.
Zmiana nazwy bloku
- Could not name block. A block named "%1" already exists.
- Nie można nazwać bloku. Blok o nazwie "%1" już istnieje.
+ Could not name block. A block named "%1" already exists.
+ Nie można nazwać bloku. Blok o nazwie "%1" już istnieje.
&OK
@@ -2313,48 +2334,48 @@ w oddzielnym oknie
Główne
- Show menu "Lines"
- Pokaż menu "Linie"
+ Show menu "Lines"
+ Pokaż menu "Linie"
- Show menu "Arcs"
- Pokaż menu "Łuki"
+ Show menu "Arcs"
+ Pokaż menu "Łuki"
- Show menu "Circles"
- Pokaż menu "Okręgi"
+ Show menu "Circles"
+ Pokaż menu "Okręgi"
- Show menu "Points"
- Pokaż menu "Punkty"
+ Show menu "Points"
+ Pokaż menu "Punkty"
- Show menu "Measure"
- Pokaż menu "Pomiar"
+ Show menu "Measure"
+ Pokaż menu "Pomiar"
- Show menu "Ellipses"
- Pokaz menu "Elipsy"
+ Show menu "Ellipses"
+ Pokaz menu "Elipsy"
Hatches / Solid Fills
Kreskowanie / całkowite Wypełnienia
- Show menu "Edit"
- Pokaż menu "Edycja"
+ Show menu "Edit"
+ Pokaż menu "Edycja"
- Show menu "Dimensions"
- Pokaż menu "Wymiarowanie"
+ Show menu "Dimensions"
+ Pokaż menu "Wymiarowanie"
Texts
Teksty
- Show menu "Select"
- Pokaż menu "Zaznacz"
+ Show menu "Select"
+ Pokaż menu "Zaznacz"
Create Block
@@ -3140,12 +3161,12 @@ w oddzielnym oknie
Witaj
- <font size="+1"><b>Welcome to QCad</b>
+ <font size="+1"><b>Welcome to QCad</b>
</font>
<br>
Please choose the unit you want to use for new drawings and your preferred language.<br>
You can changes these settings later in the Options Dialog of QCad.
- <font size="+1"><b>Witaj w programie QCad</b>
+ <font size="+1"><b>Witaj w programie QCad</b>
</font>
<br>
Proszę wybrać jednostkę którą chcesz użyć do tworzena nowych rysunków oraz Twój preferowany język.<br>
@@ -3514,7 +3535,7 @@ Powyższe ustawienia możesz później zmienić w oknie dialogowym opcji QCada.<
Gradusy
- Surveyor's units
+ Surveyor's units
Jednostki geometryczne
@@ -3522,8 +3543,8 @@ Powyższe ustawienia możesz później zmienić w oknie dialogowym opcji QCada.<
Opcje
- For the length formats 'Engineering' and 'Architectural', the unit must be set to Inch.
- Dla formatu długości 'Inżynierski' i 'Architektoniczny', jednostka musi być ustawiona na cale.
+ For the length formats 'Engineering' and 'Architectural', the unit must be set to Inch.
+ Dla formatu długości 'Inżynierski' i 'Architektoniczny', jednostka musi być ustawiona na cale.
Extension line extension:
@@ -3930,7 +3951,7 @@ Powyższe ustawienia możesz później zmienić w oknie dialogowym opcji QCada.<
Program Defaults
-
+
Time between automatc saving of thedocument in minutes.
@@ -3945,7 +3966,7 @@ Powyższe ustawienia możesz później zmienić w oknie dialogowym opcji QCada.<
QG_DlgOptionsVariables
Drawing Variables
-
+
Variable
@@ -4870,7 +4891,7 @@ Powyższe ustawienia możesz później zmienić w oknie dialogowym opcji QCada.<
again Still No Text supplied.
-
+
@@ -5301,7 +5322,7 @@ Powyższe ustawienia możesz później zmienić w oknie dialogowym opcji QCada.<
QG_LineParallelThroughOptions
Line Parallel Through Options
- Opcje "linii równoległej poprzez"
+ Opcje "linii równoległej poprzez"
Number:
@@ -5811,12 +5832,12 @@ Powyższe ustawienia możesz później zmienić w oknie dialogowym opcji QCada.<
Usuń warstwę
- Layer "%1" and all entities on it will be removed.
- Warstwa "%1" oraz wszystkie obiekty na niej zostaną usunięte.
+ Layer "%1" and all entities on it will be removed.
+ Warstwa "%1" oraz wszystkie obiekty na niej zostaną usunięte.
- Layer "%1" can never be removed.
- Warstwa "%1" nie może zostać usunięta.
+ Layer "%1" can never be removed.
+ Warstwa "%1" nie może zostać usunięta.
Layer Dialog
@@ -5827,16 +5848,16 @@ Powyższe ustawienia możesz później zmienić w oknie dialogowym opcji QCada.<
Usuń blok
- Block "%1" and all its entities will be removed.
- Blok "%1" oraz wszystkie jego obiekty zostaną usunięte.
+ Block "%1" and all its entities will be removed.
+ Blok "%1" oraz wszystkie jego obiekty zostaną usunięte.
Layer Properties
Właściwości warstwy
- Layer with a name "%1" already exists. Please specify a different name.
- Warstwa nazwana "%1" już istnieje. Proszę podać inną nazwę.
+ Layer with a name "%1" already exists. Please specify a different name.
+ Warstwa nazwana "%1" już istnieje. Proszę podać inną nazwę.
@@ -6025,12 +6046,16 @@ Czy chcesz zastąpić?
Loading Library Paths..
- Ładowanie ścieżek dla bibliotek..
+ Ładowanie ścieżek dla bibliotek..
Loading File %1..
Ładowanie pliku %1..
+
+ Loading...
+
+
RS_ActionBlocksAdd
@@ -6177,8 +6202,8 @@ Czy chcesz zastąpić?
&Wstaw blok
-
-
+
+
@@ -6858,8 +6883,8 @@ Czy chcesz zastąpić?
Wstaw Obraz (Bitmapa)
-
-
+
+
@@ -7132,7 +7157,7 @@ Czy chcesz zastąpić?
Specify through point
- Wskaż punkt "poprzez"
+ Wskaż punkt "poprzez"
Back
@@ -7198,8 +7223,8 @@ Czy chcesz zastąpić?
Rysuj wielobok ze środkiem i wierzchołkiem
-
-
+
+
@@ -8052,12 +8077,12 @@ Czy chcesz zastąpić?
Wstawia obiekt z biblioteki części.
-
-
+
+
- Cannot open file '%1'
- Nie można otworzyć pliku '%1'
+ Cannot open file '%1'
+ Nie można otworzyć pliku '%1'
@@ -8699,7 +8724,7 @@ Czy chcesz zastąpić?
&Dodaj wierzchołek
- Add polyline's node
+ Add polyline's node
Dołącz wierzchołek
@@ -8723,7 +8748,7 @@ Czy chcesz zastąpić?
Zaznacz linię łamaną, aby dodać wierzchołki
- Specify adding node's point
+ Specify adding node's point
Zdefiniuj punkt nowego wierzchołka
@@ -8738,7 +8763,7 @@ Czy chcesz zastąpić?
Dodaj &wierzchołek
- Append polyline's node
+ Append polyline's node
Dołącz wierzchołek
@@ -8785,7 +8810,7 @@ Czy chcesz zastąpić?
&Usuń wierzchołek
- Delete polyline's node
+ Delete polyline's node
Usuń wierzchołek
@@ -8809,7 +8834,7 @@ Czy chcesz zastąpić?
Określ linię łamaną, by usunąć wierzchołek
- Specify deleting node's point
+ Specify deleting node's point
Zaznacz wierzchołek do usunięcia
@@ -8933,7 +8958,7 @@ Czy chcesz zastąpić?
&Przytnij odcinek
- Trim polyline's segments
+ Trim polyline's segments
Przytnij odcinek łamanej
@@ -9963,7 +9988,7 @@ Czy chcesz zastąpić?
dimregen
-
+
po
@@ -10024,7 +10049,7 @@ Czy chcesz zastąpić?
tm
modify - multi trim (extend)
-
+
da
@@ -10048,7 +10073,7 @@ Czy chcesz zastąpić?
tm
-
+
xt
@@ -10116,7 +10141,7 @@ Czy chcesz zastąpić?
sn
-
+
sm
@@ -10132,20 +10157,20 @@ Czy chcesz zastąpić?
kill
-
+
k
-
+
back
-
+
b
back
-
+
diff --git a/ts/librecad_pt.ts b/ts/librecad_pt.ts
index 0c718efbfe..b494d83a70 100644
--- a/ts/librecad_pt.ts
+++ b/ts/librecad_pt.ts
@@ -117,7 +117,7 @@
&Toolbars
- &Barras de ferramentas
+ &Barras de ferramentas
&Order QCAD Professional Now
@@ -352,10 +352,6 @@ Auto-save disabled.
SVN Revision: %1
-
- Date: %1
-
-
Modules: %1
@@ -376,6 +372,22 @@ Auto-save disabled.
Import
+
+ Compiled on: %1
+
+
+
+ Program Icons Supplied by
+
+
+
+ Splash and Logo supplied by
+
+
+
+ Main Website :
+
+
QC_MDIWindow
@@ -6860,7 +6872,7 @@ Você deseja manter suas modificações, ou as descartar?
Loading Library Paths..
- Carregando Atalhos para Bibliotecas..
+ Carregando Atalhos para Bibliotecas..
Open Image
@@ -6875,6 +6887,10 @@ Do you want to replace it?
QCad 1.x file %1
+
+ Loading...
+
+
QtBoolPropertyManager
diff --git a/ts/librecad_ru.ts b/ts/librecad_ru.ts
index 7d2222d387..3c7435fad5 100644
--- a/ts/librecad_ru.ts
+++ b/ts/librecad_ru.ts
@@ -1,7 +1,8 @@
+
-
+
Loading..
Загрузка..
@@ -275,8 +276,8 @@ Date: %1
Командная строка
- Block '%1'
- Блок '%1'
+ Block '%1'
+ Блок '%1'
Cannot open the file
@@ -332,7 +333,7 @@ Please check the permissions.
Date: %1
- Дата: %1
+ Дата: %1
This is a %1 version which terminates
@@ -354,15 +355,15 @@ You can save your work now.
&Spline
-
+
- Running script '%1'
-
+ Running script '%1'
+
- Inserting block '%1'
-
+ Inserting block '%1'
+
&Polyline
@@ -370,46 +371,66 @@ You can save your work now.
CTRL+M
-
+
Insert Image
-
+
Auto-saving drawing...
-
+
Auto-saved drawing
-
+
Cannot auto-save the file
%1
Please check the permissions.
Auto-save disabled.
-
+
SVN Revision: %1
-
+
Help
-
+
- Bugger, I couldn't find the helpfiles on the filesystem.
-
+ Bugger, I couldn't find the helpfiles on the filesystem.
+
&Plugins
-
+
Import
-
+
+
+
+ &Toolbars
+
+
+
+ Compiled on: %1
+
+
+
+ Program Icons Supplied by
+
+
+
+ Splash and Logo supplied by
+
+
+
+ Main Website :
+
@@ -1921,15 +1942,15 @@ Auto-save disabled.
CTRL-G
-
+
Restrict&Vertically
-
+
&back
-
+
@@ -1951,7 +1972,7 @@ Auto-save disabled.
QG_ArcTangentialOptions
Tangential Arc Options
-
+
Radius:
@@ -2000,8 +2021,8 @@ Auto-save disabled.
Переименование блока
- Could not name block. A block named "%1" already exists.
- Переимнование блока невозможно. Блок с именем "%1" уже существует.
+ Could not name block. A block named "%1" already exists.
+ Переимнование блока невозможно. Блок с именем "%1" уже существует.
&OK
@@ -2120,7 +2141,7 @@ in a separate window
Arc tangential to base entity with radius
-
+
@@ -2244,7 +2265,7 @@ in a separate window
Area of polygon
-
+
@@ -2325,48 +2346,48 @@ in a separate window
Главная
- Show menu "Lines"
- Показать меню "Линии"
+ Show menu "Lines"
+ Показать меню "Линии"
- Show menu "Arcs"
- Показать меню "Дуги"
+ Show menu "Arcs"
+ Показать меню "Дуги"
- Show menu "Circles"
- Показать меню "Окружности"
+ Show menu "Circles"
+ Показать меню "Окружности"
- Show menu "Points"
- Показать меню "Точки"
+ Show menu "Points"
+ Показать меню "Точки"
- Show menu "Measure"
- Показать меню "Измерение"
+ Show menu "Measure"
+ Показать меню "Измерение"
- Show menu "Ellipses"
- Показать меню "Эллипсы"
+ Show menu "Ellipses"
+ Показать меню "Эллипсы"
Hatches / Solid Fills
Штриховки / заливки цветом
- Show menu "Edit"
- Показать меню "Редактирование"
+ Show menu "Edit"
+ Показать меню "Редактирование"
- Show menu "Dimensions"
- Показать меню "Размеры"
+ Show menu "Dimensions"
+ Показать меню "Размеры"
Texts
Тексты
- Show menu "Select"
- Показать меню "Выбор"
+ Show menu "Select"
+ Показать меню "Выбор"
Create Block
@@ -2382,11 +2403,11 @@ in a separate window
Splines
-
+
Polylines
-
+
@@ -2499,7 +2520,7 @@ in a separate window
QG_CadToolBarPolylines
Polylines
-
+
Back to main menu
@@ -2507,27 +2528,27 @@ in a separate window
Create Polyline
-
+
Delete between two nodes
-
+
Add node
-
+
Delete node
-
+
Trim segments
-
+
Append node
-
+
@@ -2660,7 +2681,7 @@ in a separate window
QG_CadToolBarSplines
Splines
-
+
Back to main menu
@@ -2668,7 +2689,7 @@ in a separate window
Spline
-
+
@@ -2778,31 +2799,31 @@ in a separate window
ø
-
+
°
-
+
±
-
+
¶
-
+
×
-
+
÷
-
+
...
-
+
@@ -3036,7 +3057,7 @@ in a separate window
Dimension
-
+
@@ -3152,12 +3173,12 @@ in a separate window
Добро пожаловать
- <font size="+1"><b>Welcome to QCad</b>
+ <font size="+1"><b>Welcome to QCad</b>
</font>
<br>
Please choose the unit you want to use for new drawings and your preferred language.<br>
You can changes these settings later in the Options Dialog of QCad.
- <font size="+1"><b>Добро пожаловать в QCad</b>
+ <font size="+1"><b>Добро пожаловать в QCad</b>
</font>
<br>
Пожалуйста, выберите единицы измерения для новых чертежей и предпочитаемый язык<br>
@@ -3326,7 +3347,7 @@ You can changes these settings later in the Options Dialog of QCad.
...
-
+
@@ -3377,7 +3398,7 @@ You can changes these settings later in the Options Dialog of QCad.
...
-
+
@@ -3428,11 +3449,11 @@ You can changes these settings later in the Options Dialog of QCad.
...
-
+
Ctrl+S
-
+
@@ -3526,16 +3547,16 @@ You can changes these settings later in the Options Dialog of QCad.
Грады
- Surveyor's units
-
+ Surveyor's units
+
Options
Параметры
- For the length formats 'Engineering' and 'Architectural', the unit must be set to Inch.
- Для форматов длин "Инженерный" и "Архитектурный" в качестве единиц измерения должны быть выбраны дюймы
+ For the length formats 'Engineering' and 'Architectural', the unit must be set to Inch.
+ Для форматов длин "Инженерный" и "Архитектурный" в качестве единиц измерения должны быть выбраны дюймы
Extension line extension:
@@ -3647,11 +3668,11 @@ You can changes these settings later in the Options Dialog of QCad.
Splines
-
+
Number of line segments per spline patch:
-
+
4
@@ -3830,7 +3851,7 @@ You can changes these settings later in the Options Dialog of QCad.
#404040
-
+
Fontsize
@@ -3878,19 +3899,19 @@ You can changes these settings later in the Options Dialog of QCad.
#000000
-
+
#ffffff
-
+
#c0c0c0
-
+
#808080
-
+
A&utomatically scale grid
@@ -3902,11 +3923,11 @@ You can changes these settings later in the Options Dialog of QCad.
#a54747
-
+
#739373
-
+
&Highlighted Color:
@@ -3938,42 +3959,42 @@ You can changes these settings later in the Options Dialog of QCad.
Alt+U
-
+
Minimal Grid Spacing (px):
-
+
Program Defaults
-
+
Time between automatc saving of thedocument in minutes.
-
+
Auto save time:
-
+
QG_DlgOptionsVariables
Drawing Variables
-
+
Variable
-
+
Code
-
+
Value
-
+
&OK
@@ -4075,7 +4096,7 @@ You can changes these settings later in the Options Dialog of QCad.
...
-
+
@@ -4126,7 +4147,7 @@ You can changes these settings later in the Options Dialog of QCad.
...
-
+
@@ -4177,14 +4198,14 @@ You can changes these settings later in the Options Dialog of QCad.
...
-
+
QG_DlgSpline
Spline
-
+
Layer:
@@ -4196,11 +4217,11 @@ You can changes these settings later in the Options Dialog of QCad.
Degree:
-
+
Closed
-
+
1
@@ -4391,435 +4412,435 @@ You can changes these settings later in the Options Dialog of QCad.
[0000-007F] Basic Latin
-
+
[0080-00FF] Latin-1 Supplementary
-
+
[0100-017F] Latin Extended-A
-
+
[0180-024F] Latin Extended-B
-
+
[0250-02AF] IPA Extensions
-
+
[02B0-02FF] Spacing Modifier Letters
-
+
[0300-036F] Combining Diacritical Marks
-
+
[0370-03FF] Greek and Coptic
-
+
[0400-04FF] Cyrillic
-
+
[0500-052F] Cyrillic Supplementary
-
+
[0530-058F] Armenian
-
+
[0590-05FF] Hebrew
-
+
[0600-06FF] Arabic
-
+
[0700-074F] Syriac
-
+
[0780-07BF] Thaana
-
+
[0900-097F] Devanagari
-
+
[0980-09FF] Bengali
-
+
[0A00-0A7F] Gurmukhi
-
+
[0A80-0AFF] Gujarati
-
+
[0B00-0B7F] Oriya
-
+
[0B80-0BFF] Tamil
-
+
[0C00-0C7F] Telugu
-
+
[0C80-0CFF] Kannada
-
+
[0D00-0D7F] Malayalam
-
+
[0D80-0DFF] Sinhala
-
+
[0E00-0E7F] Thai
-
+
[0E80-0EFF] Lao
-
+
[0F00-0FFF] Tibetan
-
+
[1000-109F] Myanmar
-
+
[10A0-10FF] Georgian
-
+
[1100-11FF] Hangul Jamo
-
+
[1200-137F] Ethiopic
-
+
[13A0-13FF] Cherokee
-
+
[1400-167F] Unified Canadian Aboriginal Syllabic
-
+
[1680-169F] Ogham
-
+
[16A0-16FF] Runic
-
+
[1700-171F] Tagalog
-
+
[1720-173F] Hanunoo
-
+
[1740-175F] Buhid
-
+
[1760-177F] Tagbanwa
-
+
[1780-17FF] Khmer
-
+
[1800-18AF] Mongolian
-
+
[1E00-1EFF] Latin Extended Additional
-
+
[1F00-1FFF] Greek Extended
-
+
[2000-206F] General Punctuation
-
+
[2070-209F] Superscripts and Subscripts
-
+
[20A0-20CF] Currency Symbols
-
+
[20D0-20FF] Combining Marks for Symbols
-
+
[2100-214F] Letterlike Symbols
-
+
[2150-218F] Number Forms
-
+
[2190-21FF] Arrows
-
+
[2200-22FF] Mathematical Operators
-
+
[2300-23FF] Miscellaneous Technical
-
+
[2400-243F] Control Pictures
-
+
[2440-245F] Optical Character Recognition
-
+
[2460-24FF] Enclosed Alphanumerics
-
+
[2500-257F] Box Drawing
-
+
[2580-259F] Block Elements
-
+
[25A0-25FF] Geometric Shapes
-
+
[2600-26FF] Miscellaneous Symbols
-
+
[2700-27BF] Dingbats
-
+
[27C0-27EF] Miscellaneous Mathematical Symbols-A
-
+
[27F0-27FF] Supplemental Arrows-A
-
+
[2800-28FF] Braille Patterns
-
+
[2900-297F] Supplemental Arrows-B
-
+
[2980-29FF] Miscellaneous Mathematical Symbols-B
-
+
[2A00-2AFF] Supplemental Mathematical Operators
-
+
[2E80-2EFF] CJK Radicals Supplement
-
+
[2F00-2FDF] Kangxi Radicals
-
+
[2FF0-2FFF] Ideographic Description Characters
-
+
[3000-303F] CJK Symbols and Punctuation
-
+
[3040-309F] Hiragana
-
+
[30A0-30FF] Katakana
-
+
[3100-312F] Bopomofo
-
+
[3130-318F] Hangul Compatibility Jamo
-
+
[3190-319F] Kanbun
-
+
[31A0-31BF] Bopomofo Extended
-
+
[3200-32FF] Enclosed CJK Letters and Months
-
+
[3300-33FF] CJK Compatibility
-
+
[3400-4DBF] CJK Unified Ideographs Extension A
-
+
[4E00-9FAF] CJK Unified Ideographs
-
+
[A000-A48F] Yi Syllables
-
+
[A490-A4CF] Yi Radicals
-
+
[AC00-D7AF] Hangul Syllables
-
+
[D800-DBFF] High Surrogates
-
+
[DC00-DFFF] Low Surrogate Area
-
+
[E000-F8FF] Private Use Area
-
+
[F900-FAFF] CJK Compatibility Ideographs
-
+
[FB00-FB4F] Alphabetic Presentation Forms
-
+
[FB50-FDFF] Arabic Presentation Forms-A
-
+
[FE00-FE0F] Variation Selectors
-
+
[FE20-FE2F] Combining Half Marks
-
+
[FE30-FE4F] CJK Compatibility Forms
-
+
[FE50-FE6F] Small Form Variants
-
+
[FE70-FEFF] Arabic Presentation Forms-B
-
+
[FF00-FFEF] Halfwidth and Fullwidth Forms
-
+
[FFF0-FFFF] Specials
-
+
[10300-1032F] Old Italic
-
+
[10330-1034F] Gothic
-
+
[10400-1044F] Deseret
-
+
[1D000-1D0FF] Byzantine Musical Symbols
-
+
[1D100-1D1FF] Musical Symbols
-
+
[1D400-1D7FF] Mathematical Alphanumeric Symbols
-
+
[20000-2A6DF] CJK Unified Ideographs Extension B
-
+
[2F800-2FA1F] CJK Compatibility Ideographs Supplement
-
+
[E0000-E007F] Tags
-
+
[F0000-FFFFD] Supplementary Private Use Area-A
-
+
[100000-10FFFD] Supplementary Private Use Area-B
-
+
&Height:
@@ -4847,7 +4868,7 @@ You can changes these settings later in the Options Dialog of QCad.
Alt+D
-
+
@@ -4886,7 +4907,7 @@ You can changes these settings later in the Options Dialog of QCad.
again Still No Text supplied.
-
+
@@ -5492,7 +5513,7 @@ You can changes these settings later in the Options Dialog of QCad.
...
-
+
@@ -5534,11 +5555,11 @@ You can changes these settings later in the Options Dialog of QCad.
Tangential
-
+
Tan Radius
-
+
Angle
@@ -5625,11 +5646,11 @@ You can changes these settings later in the Options Dialog of QCad.
QG_SplineOptions
Spline Options
-
+
Degree:
-
+
1
@@ -5645,7 +5666,7 @@ You can changes these settings later in the Options Dialog of QCad.
Closed
-
+
Undo
@@ -5827,12 +5848,12 @@ You can changes these settings later in the Options Dialog of QCad.
Удалить слой
- Layer "%1" and all entities on it will be removed.
- Слой "%1" и все объекты на нем будут удалены.
+ Layer "%1" and all entities on it will be removed.
+ Слой "%1" и все объекты на нем будут удалены.
- Layer "%1" can never be removed.
- Слой "%1" никогда удалить нельзя.
+ Layer "%1" can never be removed.
+ Слой "%1" никогда удалить нельзя.
Layer Dialog
@@ -5843,16 +5864,16 @@ You can changes these settings later in the Options Dialog of QCad.
Удалить блок
- Block "%1" and all its entities will be removed.
- Блок "%1" и все его объекты будут удалены.
+ Block "%1" and all its entities will be removed.
+ Блок "%1" и все его объекты будут удалены.
Layer Properties
Свойства слоя
- Layer with a name "%1" already exists. Please specify a different name.
- Слой с именем "%1" уже существует. Укажите, пожалуйста, другое имя.
+ Layer with a name "%1" already exists. Please specify a different name.
+ Слой с именем "%1" уже существует. Укажите, пожалуйста, другое имя.
@@ -5893,35 +5914,35 @@ Do you want to replace it?
Joint Photographic Experts Group
-
+
Multiple-image Network Graphics
-
+
Portable Bit Map
-
+
Portable Grey Map
-
+
Portable Network Graphic
-
+
Portable Pixel Map
-
+
X Bitmap Format
-
+
X Pixel Map
-
+
All Image Files (%1)
@@ -5929,11 +5950,11 @@ Do you want to replace it?
Graphics Interchange Format
-
+
Drawing Exchange %1
-
+
QCad 1.x file %1
@@ -5953,83 +5974,83 @@ Do you want to replace it?
Inch
-
+
Foot
-
+
Mile
-
+
Millimeter
-
+
Centimeter
-
+
Meter
-
+
Kilometer
-
+
Microinch
-
+
Mil
-
+
Yard
-
+
Angstrom
-
+
Nanometer
-
+
Micron
-
+
Decimeter
-
+
Decameter
-
+
Hectometer
-
+
Gigameter
-
+
Astro
-
+
Lightyear
-
+
Parsec
-
+
Export Image
@@ -6041,12 +6062,16 @@ Do you want to replace it?
Loading Library Paths..
- Загрузка библиотечных элементов..
+ Загрузка библиотечных элементов..
Loading File %1..
Загрузка файла %1..
+
+ Loading...
+
+
RS_ActionBlocksAdd
@@ -6536,7 +6561,7 @@ Do you want to replace it?
Specify included angle:
-
+
@@ -6582,11 +6607,11 @@ Do you want to replace it?
RS_ActionDrawArcTangential
Arc: Tangential
-
+
Specify base entity
-
+
Cancel
@@ -7483,26 +7508,26 @@ Do you want to replace it?
Cannot close sequence of lines: Not enough entities defined yet.
-
+
Undo disallowed due a fatal bug somewhere. Sorry.
-
+
Cannot undo: Not enough entities defined yet.
-
+
RS_ActionDrawSpline
&Spline
-
+
Specify first control point
-
+
Cancel
@@ -7510,7 +7535,7 @@ Do you want to replace it?
Specify next control point or [%1]
-
+
Back
@@ -7518,11 +7543,11 @@ Do you want to replace it?
Specify next control point
-
+
Cannot undo: Not enough entities defined yet.
-
+
@@ -7657,7 +7682,7 @@ Do you want to replace it?
&New...
-
+
@@ -7748,23 +7773,23 @@ Do you want to replace it?
RS_ActionInfoArea
Polygonal Area
-
+
Area: %1
-
+
Circumference: %1
-
+
Point: %1/%2
-
+
Specify first point of polygon
-
+
Cancel
@@ -7772,11 +7797,11 @@ Do you want to replace it?
Specify next point of polygon
-
+
Terminate
-
+
@@ -8028,8 +8053,8 @@ Do you want to replace it?
Вставляет объект из библиотеки.
- Cannot open file '%1'
-
+ Cannot open file '%1'
+
@@ -8161,11 +8186,11 @@ Do you want to replace it?
&Divide
-
+
Entity must be a line, arc, circle or ellipse.
-
+
@@ -8211,35 +8236,35 @@ Do you want to replace it?
Entities not in the same polyline.
-
+
Parent of second entity is not a polyline
-
+
Parent of second entity is NULL
-
+
One of the chosen entities is NULL
-
+
Parent of first entity is not a polyline
-
+
Parent of first entity is NULL
-
+
First entity is NULL
-
+
Second entity is NULL
-
+
@@ -8680,11 +8705,11 @@ Do you want to replace it?
&Add node
-
+
- Add polyline's node
-
+ Add polyline's node
+
No Entity found.
@@ -8692,23 +8717,23 @@ Do you want to replace it?
Entity must be a polyline.
-
+
Adding point is invalid.
-
+
Adding point is not on entity.
-
+
Specify polyline to add nodes
-
+
- Specify adding node's point
-
+ Specify adding node's point
+
@@ -8719,11 +8744,11 @@ Do you want to replace it?
A&ppend node
-
+
- Append polyline's node
-
+ Append polyline's node
+
No Entity found.
@@ -8731,15 +8756,15 @@ Do you want to replace it?
Entity must be a polyline.
-
+
Click somewhere near the beginning or end of existing polyline.
-
+
Specify the polyline somewhere near the beginning or end point
-
+
Specify next point or [%1]
@@ -8766,11 +8791,11 @@ Do you want to replace it?
&Delete node
-
+
- Delete polyline's node
-
+ Delete polyline's node
+
No Entity found.
@@ -8778,23 +8803,23 @@ Do you want to replace it?
Entity must be a polyline.
-
+
Adding point is invalid.
-
+
Adding point is not on entity.
-
+
Specify polyline to delete node
-
+
- Specify deleting node's point
-
+ Specify deleting node's point
+
@@ -8809,11 +8834,11 @@ Do you want to replace it?
Delete &between two nodes
-
+
Delete between two nodes
-
+
No Entity found.
@@ -8821,42 +8846,42 @@ Do you want to replace it?
Entity must be a polyline.
-
+
Deletinging point is invalid.
-
+
Deleting point is not on entity.
-
+
Deleteinging point is not on entity.
-
+
Specify polyline to delete between two nodes
-
+
Specify first node
-
+
Specify second node
-
+
RS_ActionPolylineEquidistant
Create &Equidistant Polylines
-
+
Create Equidistant Polylines
-
+
No Entity found.
@@ -8864,11 +8889,11 @@ Do you want to replace it?
Entity must be a polyline.
-
+
Choose the original polyline
-
+
Cancel
@@ -8879,11 +8904,11 @@ Do you want to replace it?
RS_ActionPolylineSegment
Create Polyline from Existing &Segments
-
+
Create Polyline from Existing Segments
-
+
No Entity found.
@@ -8891,11 +8916,11 @@ Do you want to replace it?
Entity must be a line or arc.
-
+
Choose one of the segments on the original polyline
-
+
Cancel
@@ -8914,11 +8939,11 @@ Do you want to replace it?
&Trim segments
-
+
- Trim polyline's segments
-
+ Trim polyline's segments
+
No Entity found.
@@ -8926,27 +8951,27 @@ Do you want to replace it?
Entity must be a polyline.
-
+
Specifying point is invalid.
-
+
No Segment found on entity.
-
+
Specify polyline to trim
-
+
Specify first segment
-
+
Specify second segment
-
+
@@ -8992,7 +9017,7 @@ Do you want to replace it?
Ctrl+K
-
+
@@ -9336,306 +9361,306 @@ Do you want to replace it?
RS_Commands
line
-
+
rectangle
-
+
text
-
+
regen
-
+
undo
-
+
u
undo
-
+
redo
-
+
arc
-
+
angle
-
+
factor
-
+
columns
-
+
rows
-
+
columnspacing
-
+
rowspacing
-
+
ang
angle
-
+
a
angle
-
+
fact
factor
-
+
f
factor
-
+
cols
columns
-
+
c
columns
-
+
r
rows
-
+
columnspacing
columnspacing for inserts
-
+
colspacing
columnspacing for inserts
-
+
cs
columnspacing for inserts
-
+
rowspacing
rowspacing for inserts
-
+
rs
rowspacing for inserts
-
+
center
-
+
cen
center
-
+
c
center
-
+
reversed
reversed arc
-
+
rev
reversed arc
-
+
r
reversed arc
-
+
point
-
+
po
point
-
+
offset
-
+
o
offset
-
+
parallel
-
+
length
-
+
close
-
+
number
-
+
through
-
+
help
-
+
?
help
-
+
length
length
-
+
len
length
-
+
l
length
-
+
c
close
-
+
num
number
-
+
n
number
-
+
t
through
-
+
par
parallel
-
+
length1
-
+
length2
-
+
radius
-
+
trim
-
+
length1
length1
-
+
len1
length1
-
+
l1
length1
-
+
length2
length2
-
+
len2
length2
-
+
l2
length2
-
+
r
radius
-
+
t
text
-
+
chord length
-
+
length
chord length
-
+
l
chord length
-
+
Command: %1
@@ -9647,423 +9672,423 @@ Do you want to replace it?
circle
-
+
ci
circle
-
+
zw
zoom - window
-
+
za
zoom - auto
-
+
zp
zoom - pan
-
+
li
line
-
+
re
rectangle
-
+
rp
regular polygon
-
+
c2
2 point circle
-
+
c3
3 point circle
-
+
ar
arc
-
+
a3
3 point arc
-
+
ep
ellipse
-
+
tx
text
-
+
mt
text
-
+
da
dimension - aligned
-
+
dh
dimension - horizontal
-
+
dv
dimension - vertical
-
+
dr
dimension - linear
-
+
ld
dimension - leader
-
+
rd
redraw
-
+
zi
zoom - in
-
+
zo
zoom - out
-
+
os
snap - none
-
+
sg
snap - grid
-
+
se
snap - end
-
+
si
snap - intersection
-
+
sn
snap - center
-
+
sm
snap - middle
-
+
sn
snap - nearest
-
+
np
snap - nearest point
-
+
fr*
layers - freeze all
-
+
th*
layers - defreeze all
-
+
tn
Deselect all
-
+
ch
modify - bevel (chamfer)
-
+
xt
modify - trim (extend)
-
+
rm
modify - trim
-
+
mv
modify - move
-
+
mi
modify - mirror
-
+
ro
modify - rotate
-
+
sz
modify - scale
-
+
ss
modify - stretch
-
+
er
modify - delete (erase)
-
+
oo
modify - undo (oops)
-
+
uu
modify - redo
-
+
xp
modify - explode
-
+
ex
modify - explode
-
+
dimregen
-
+
po
-
+
ln
-
+
l
-
+
a
-
+
ci
-
+
rec
-
+
rectang
-
+
rg
zoom - redraw
-
+
zr
zoom - redraw
-
+
zv
zoom - previous
-
+
r
-
+
polyline
-
+
pa
parallel
-
+
tm
modify - multi trim (extend)
-
+
da
-
+
dh
-
+
dr
-
+
dv
-
+
ld
-
+
tm
-
+
xt
-
+
rm
-
+
mv
-
+
ch
-
+
mi
-
+
ro
-
+
sz
-
+
ss
-
+
er
-
+
oo
-
+
uu
-
+
xp
-
+
os
-
+
sg
-
+
se
-
+
si
-
+
sn
-
+
sm
-
+
np
-
+
tn
-
+
kill
-
+
k
-
+
back
-
+
b
back
-
+
diff --git a/ts/librecad_sk.ts b/ts/librecad_sk.ts
index ef34adfe70..444c1ec031 100644
--- a/ts/librecad_sk.ts
+++ b/ts/librecad_sk.ts
@@ -1,7 +1,8 @@
+
-
+
Loading..
Nahrávam..
@@ -275,8 +276,8 @@ Dátum %1
Príkazový riadok
- Block '%1'
- Blok '%1'
+ Block '%1'
+ Blok '%1'
Cannot open the file
@@ -332,7 +333,7 @@ Prosím skontrolujte prístupové práva.
Date: %1
- Dátum: %1
+ Dátum: %1
This is a %1 version which terminates
@@ -350,19 +351,19 @@ Teraz môžete uložiť svoju prácu.
&Window
-
+
&Spline
-
+
- Running script '%1'
-
+ Running script '%1'
+
- Inserting block '%1'
-
+ Inserting block '%1'
+
&Polyline
@@ -370,46 +371,66 @@ Teraz môžete uložiť svoju prácu.
CTRL+M
-
+
Insert Image
-
+
Auto-saving drawing...
-
+
Auto-saved drawing
-
+
Cannot auto-save the file
%1
Please check the permissions.
Auto-save disabled.
-
+
SVN Revision: %1
-
+
Help
-
+
- Bugger, I couldn't find the helpfiles on the filesystem.
-
+ Bugger, I couldn't find the helpfiles on the filesystem.
+
&Plugins
-
+
Import
-
+
+
+
+ &Toolbars
+
+
+
+ Compiled on: %1
+
+
+
+ Program Icons Supplied by
+
+
+
+ Splash and Logo supplied by
+
+
+
+ Main Website :
+
@@ -957,15 +978,15 @@ Auto-save disabled.
CTRL-G
-
+
Restrict&Vertically
-
+
&back
-
+
@@ -987,7 +1008,7 @@ Auto-save disabled.
QG_ArcTangentialOptions
Tangential Arc Options
-
+
Radius:
@@ -1036,8 +1057,8 @@ Auto-save disabled.
Premenovanie bloku
- Could not name block. A block named "%1" already exists.
- Nemôžem pomenovať blok. Blok s menom "%1" už existuje.
+ Could not name block. A block named "%1" already exists.
+ Nemôžem pomenovať blok. Blok s menom "%1" už existuje.
&OK
@@ -1156,7 +1177,7 @@ v inom okne
Arc tangential to base entity with radius
-
+
@@ -1280,7 +1301,7 @@ v inom okne
Area of polygon
-
+
@@ -1361,48 +1382,48 @@ v inom okne
Hlavné
- Show menu "Lines"
- Zobraz menu "Čiary"
+ Show menu "Lines"
+ Zobraz menu "Čiary"
- Show menu "Arcs"
- Zobraz menu "Oblúky"
+ Show menu "Arcs"
+ Zobraz menu "Oblúky"
- Show menu "Circles"
- Zobraz menu "Kružnice"
+ Show menu "Circles"
+ Zobraz menu "Kružnice"
- Show menu "Points"
- Zobraz menu "Body"
+ Show menu "Points"
+ Zobraz menu "Body"
- Show menu "Measure"
- Zobraz menu "Rozmery"
+ Show menu "Measure"
+ Zobraz menu "Rozmery"
- Show menu "Ellipses"
- Zobraz menu "Elipsy"
+ Show menu "Ellipses"
+ Zobraz menu "Elipsy"
Hatches / Solid Fills
Šráfy/Výplne
- Show menu "Edit"
- Zobraz menu "Úpravy"
+ Show menu "Edit"
+ Zobraz menu "Úpravy"
- Show menu "Dimensions"
- Zobraz menu "Kóty"
+ Show menu "Dimensions"
+ Zobraz menu "Kóty"
Texts
Texty
- Show menu "Select"
- Zobraz menu "Označenie"
+ Show menu "Select"
+ Zobraz menu "Označenie"
Create Block
@@ -1418,11 +1439,11 @@ v inom okne
Splines
-
+
Polylines
-
+
@@ -1531,7 +1552,7 @@ v inom okne
QG_CadToolBarPolylines
Polylines
-
+
Back to main menu
@@ -1539,27 +1560,27 @@ v inom okne
Create Polyline
-
+
Delete between two nodes
-
+
Add node
-
+
Delete node
-
+
Trim segments
-
+
Append node
-
+
@@ -1692,7 +1713,7 @@ v inom okne
QG_CadToolBarSplines
Splines
-
+
Back to main menu
@@ -1700,7 +1721,7 @@ v inom okne
Spline
-
+
@@ -1834,7 +1855,7 @@ v inom okne
...
-
+
@@ -2068,7 +2089,7 @@ v inom okne
Dimension
-
+
@@ -2184,12 +2205,12 @@ v inom okne
Vitajte
- <font size="+1"><b>Welcome to QCad</b>
+ <font size="+1"><b>Welcome to QCad</b>
</font>
<br>
Please choose the unit you want to use for new drawings and your preferred language.<br>
You can changes these settings later in the Options Dialog of QCad.
- <font size="+1"><b>Vitajte v programe QCad</b>(new line)
+ <font size="+1"><b>Vitajte v programe QCad</b>(new line)
</font>
<br>
Prosím zvoľte jednotky, ktoré chcete používať pri kreslení a preferovaný jazyk.<br>
@@ -2358,7 +2379,7 @@ Tieto nastavenia môžete neskôr zmeniť v dialógovom okne Nastavenia.
...
-
+
@@ -2409,7 +2430,7 @@ Tieto nastavenia môžete neskôr zmeniť v dialógovom okne Nastavenia.
...
-
+
@@ -2460,11 +2481,11 @@ Tieto nastavenia môžete neskôr zmeniť v dialógovom okne Nastavenia.
...
-
+
Ctrl+S
-
+
@@ -2558,7 +2579,7 @@ Tieto nastavenia môžete neskôr zmeniť v dialógovom okne Nastavenia.Gradiány
- Surveyor's units
+ Surveyor's units
Zememeračské
@@ -2566,8 +2587,8 @@ Tieto nastavenia môžete neskôr zmeniť v dialógovom okne Nastavenia.Nastavenia
- For the length formats 'Engineering' and 'Architectural', the unit must be set to Inch.
- Pre formáty "Inžinierský" a "Stavebný" musí byť formát jednotiek nastavený na palce.
+ For the length formats 'Engineering' and 'Architectural', the unit must be set to Inch.
+ Pre formáty "Inžinierský" a "Stavebný" musí byť formát jednotiek nastavený na palce.
Extension line extension:
@@ -2679,11 +2700,11 @@ Tieto nastavenia môžete neskôr zmeniť v dialógovom okne Nastavenia.
Splines
-
+
Number of line segments per spline patch:
-
+
4
@@ -2950,46 +2971,46 @@ Tieto nastavenia môžete neskôr zmeniť v dialógovom okne Nastavenia.
Alt+S
-
+
Alt+U
-
+
Minimal Grid Spacing (px):
-
+
Program Defaults
-
+
Time between automatc saving of thedocument in minutes.
-
+
Auto save time:
-
+
QG_DlgOptionsVariables
Drawing Variables
-
+
Variable
-
+
Code
-
+
Value
-
+
&OK
@@ -3091,7 +3112,7 @@ Tieto nastavenia môžete neskôr zmeniť v dialógovom okne Nastavenia.
...
-
+
@@ -3142,7 +3163,7 @@ Tieto nastavenia môžete neskôr zmeniť v dialógovom okne Nastavenia.
...
-
+
@@ -3193,14 +3214,14 @@ Tieto nastavenia môžete neskôr zmeniť v dialógovom okne Nastavenia.
...
-
+
QG_DlgSpline
Spline
-
+
Layer:
@@ -3212,11 +3233,11 @@ Tieto nastavenia môžete neskôr zmeniť v dialógovom okne Nastavenia.
Degree:
-
+
Closed
-
+
1
@@ -3863,7 +3884,7 @@ Tieto nastavenia môžete neskôr zmeniť v dialógovom okne Nastavenia.
Alt+D
-
+
@@ -3902,7 +3923,7 @@ Tieto nastavenia môžete neskôr zmeniť v dialógovom okne Nastavenia.
again Still No Text supplied.
-
+
@@ -4508,7 +4529,7 @@ Tieto nastavenia môžete neskôr zmeniť v dialógovom okne Nastavenia.
...
-
+
@@ -4550,11 +4571,11 @@ Tieto nastavenia môžete neskôr zmeniť v dialógovom okne Nastavenia.
Tangential
-
+
Tan Radius
-
+
Angle
@@ -4581,15 +4602,15 @@ Tieto nastavenia môžete neskôr zmeniť v dialógovom okne Nastavenia.
Toggle Black / White mode
-
+
Center to page
-
+
Fit to page
-
+
@@ -4641,11 +4662,11 @@ Tieto nastavenia môžete neskôr zmeniť v dialógovom okne Nastavenia.QG_SplineOptions
Spline Options
-
+
Degree:
-
+
1
@@ -4661,7 +4682,7 @@ Tieto nastavenia môžete neskôr zmeniť v dialógovom okne Nastavenia.
Closed
-
+
Undo
@@ -4843,12 +4864,12 @@ Tieto nastavenia môžete neskôr zmeniť v dialógovom okne Nastavenia.Vymazanie hladiny
- Layer "%1" and all entities on it will be removed.
- Hladina "%1" a všetky objekty na nej budú vymazané.
+ Layer "%1" and all entities on it will be removed.
+ Hladina "%1" a všetky objekty na nej budú vymazané.
- Layer "%1" can never be removed.
- Hladina "%1" nemôže byť nikdy vymazaná.
+ Layer "%1" can never be removed.
+ Hladina "%1" nemôže byť nikdy vymazaná.
Layer Dialog
@@ -4859,16 +4880,16 @@ Tieto nastavenia môžete neskôr zmeniť v dialógovom okne Nastavenia.Vymazanie bloku
- Block "%1" and all its entities will be removed.
- Blok "%1" a všetky jeho objekty budú vymazané.
+ Block "%1" and all its entities will be removed.
+ Blok "%1" a všetky jeho objekty budú vymazané.
Layer Properties
Nastavenie hladín
- Layer with a name "%1" already exists. Please specify a different name.
- Hladina menom "%1" už existuje. Prosím zvoľte iné meno.
+ Layer with a name "%1" already exists. Please specify a different name.
+ Hladina menom "%1" už existuje. Prosím zvoľte iné meno.
@@ -4880,7 +4901,7 @@ Tieto nastavenia môžete neskôr zmeniť v dialógovom okne Nastavenia.
%1 already exists.
Do you want to replace it?
- Súbor "%1" už existuje.
+ Súbor "%1" už existuje.
Chcete ho nahradiť?
@@ -4969,83 +4990,83 @@ Chcete ho nahradiť?
Inch
-
+
Foot
-
+
Mile
-
+
Millimeter
-
+
Centimeter
-
+
Meter
-
+
Kilometer
-
+
Microinch
-
+
Mil
-
+
Yard
-
+
Angstrom
-
+
Nanometer
-
+
Micron
-
+
Decimeter
-
+
Decameter
-
+
Hectometer
-
+
Gigameter
-
+
Astro
-
+
Lightyear
-
+
Parsec
-
+
Export Image
@@ -5057,12 +5078,16 @@ Chcete ho nahradiť?
Loading Library Paths..
- Nahrávam knižničné súbory..
+ Nahrávam knižničné súbory..
Loading File %1..
Nahrávam súbor %1..
+
+ Loading...
+
+
RS_ActionBlocksAdd
@@ -5209,8 +5234,8 @@ Chcete ho nahradiť?
Zadajte vzdialenosť riadkov:
-
-
+
+
@@ -5602,11 +5627,11 @@ Chcete ho nahradiť?
RS_ActionDrawArcTangential
Arc: Tangential
-
+
Specify base entity
-
+
Cancel
@@ -5840,11 +5865,11 @@ Chcete ho nahradiť?
Invalid hatch area. Please check that the entities chosen form one or more closed contours.
-
+
Hatch created successfully.
-
+
@@ -5882,8 +5907,8 @@ Chcete ho nahradiť?
Zadajte faktor:
-
-
+
+
@@ -6218,8 +6243,8 @@ Chcete ho nahradiť?
Nesprávny výraz
-
-
+
+
@@ -6511,22 +6536,22 @@ Chcete ho nahradiť?
Specify next point
-
+
Undo disallowed due a fatal bug somewhere. Sorry.
-
+
RS_ActionDrawSpline
&Spline
-
+
Specify first control point
-
+
Cancel
@@ -6534,7 +6559,7 @@ Chcete ho nahradiť?
Specify next control point or [%1]
-
+
Back
@@ -6542,7 +6567,7 @@ Chcete ho nahradiť?
Specify next control point
-
+
Cannot undo: Not enough entities defined yet.
@@ -6681,7 +6706,7 @@ Chcete ho nahradiť?
&New...
-
+
@@ -6772,23 +6797,23 @@ Chcete ho nahradiť?
RS_ActionInfoArea
Polygonal Area
-
+
Area: %1
-
+
Circumference: %1
-
+
Point: %1/%2
-
+
Specify first point of polygon
-
+
Cancel
@@ -6796,11 +6821,11 @@ Chcete ho nahradiť?
Specify next point of polygon
-
+
Terminate
-
+
@@ -7052,12 +7077,12 @@ Chcete ho nahradiť?
Zadajte faktor:
-
-
+
+
- Cannot open file '%1'
-
+ Cannot open file '%1'
+
@@ -7181,11 +7206,11 @@ Chcete ho nahradiť?
&Divide
-
+
Entity must be a line, arc, circle or ellipse.
-
+
@@ -7231,35 +7256,35 @@ Chcete ho nahradiť?
Entities not in the same polyline.
-
+
Parent of second entity is not a polyline
-
+
Parent of second entity is NULL
-
+
One of the chosen entities is NULL
-
+
Parent of first entity is not a polyline
-
+
Parent of first entity is NULL
-
+
First entity is NULL
-
+
Second entity is NULL
-
+
@@ -7700,11 +7725,11 @@ Chcete ho nahradiť?
&Add node
-
+
- Add polyline's node
-
+ Add polyline's node
+
No Entity found.
@@ -7712,23 +7737,23 @@ Chcete ho nahradiť?
Entity must be a polyline.
-
+
Adding point is invalid.
-
+
Adding point is not on entity.
-
+
Specify polyline to add nodes
-
+
- Specify adding node's point
-
+ Specify adding node's point
+
@@ -7739,11 +7764,11 @@ Chcete ho nahradiť?
A&ppend node
-
+
- Append polyline's node
-
+ Append polyline's node
+
No Entity found.
@@ -7751,15 +7776,15 @@ Chcete ho nahradiť?
Entity must be a polyline.
-
+
Click somewhere near the beginning or end of existing polyline.
-
+
Specify the polyline somewhere near the beginning or end point
-
+
Specify next point or [%1]
@@ -7771,7 +7796,7 @@ Chcete ho nahradiť?
Specify next point
-
+
@@ -7786,11 +7811,11 @@ Chcete ho nahradiť?
&Delete node
-
+
- Delete polyline's node
-
+ Delete polyline's node
+
No Entity found.
@@ -7798,23 +7823,23 @@ Chcete ho nahradiť?
Entity must be a polyline.
-
+
Adding point is invalid.
-
+
Adding point is not on entity.
-
+
Specify polyline to delete node
-
+
- Specify deleting node's point
-
+ Specify deleting node's point
+
@@ -7829,11 +7854,11 @@ Chcete ho nahradiť?
Delete &between two nodes
-
+
Delete between two nodes
-
+
No Entity found.
@@ -7841,42 +7866,42 @@ Chcete ho nahradiť?
Entity must be a polyline.
-
+
Deletinging point is invalid.
-
+
Deleting point is not on entity.
-
+
Deleteinging point is not on entity.
-
+
Specify polyline to delete between two nodes
-
+
Specify first node
-
+
Specify second node
-
+
RS_ActionPolylineEquidistant
Create &Equidistant Polylines
-
+
Create Equidistant Polylines
-
+
No Entity found.
@@ -7884,11 +7909,11 @@ Chcete ho nahradiť?
Entity must be a polyline.
-
+
Choose the original polyline
-
+
Cancel
@@ -7899,11 +7924,11 @@ Chcete ho nahradiť?
RS_ActionPolylineSegment
Create Polyline from Existing &Segments
-
+
Create Polyline from Existing Segments
-
+
No Entity found.
@@ -7911,11 +7936,11 @@ Chcete ho nahradiť?
Entity must be a line or arc.
-
+
Choose one of the segments on the original polyline
-
+
Cancel
@@ -7934,11 +7959,11 @@ Chcete ho nahradiť?
&Trim segments
-
+
- Trim polyline's segments
-
+ Trim polyline's segments
+
No Entity found.
@@ -7946,27 +7971,27 @@ Chcete ho nahradiť?
Entity must be a polyline.
-
+
Specifying point is invalid.
-
+
No Segment found on entity.
-
+
Specify polyline to trim
-
+
Specify first segment
-
+
Specify second segment
-
+
@@ -8012,7 +8037,7 @@ Chcete ho nahradiť?
Ctrl+K
-
+
@@ -8295,7 +8320,7 @@ Chcete ho nahradiť?
RS_ActionZoomPrevious
&Previous View
-
+
@@ -8994,7 +9019,7 @@ Chcete ho nahradiť?
zv
zoom - previous
-
+
r
@@ -9002,7 +9027,7 @@ Chcete ho nahradiť?
polyline
-
+
pa
@@ -9012,7 +9037,7 @@ Chcete ho nahradiť?
tm
modify - multi trim (extend)
-
+
da
@@ -9036,7 +9061,7 @@ Chcete ho nahradiť?
tm
-
+
xt
@@ -9120,20 +9145,20 @@ Chcete ho nahradiť?
kill
-
+
k
-
+
back
-
+
b
back
-
+
diff --git a/ts/librecad_tr.ts b/ts/librecad_tr.ts
index fe7495e3cc..474fe6de7a 100644
--- a/ts/librecad_tr.ts
+++ b/ts/librecad_tr.ts
@@ -1,3 +1,4 @@
+
@@ -174,8 +175,8 @@
Yeni dosya oluşturuluyor...
- Block '%1'
- Blok '%1'
+ Block '%1'
+ Blok '%1'
unnamed document %1
@@ -303,7 +304,7 @@ Lütfen dosya izinlerine bakın.
Date: %1
- Tarih: %1
+ Tarih: %1
This is a %1 version which terminates
@@ -320,19 +321,19 @@ adresinden temin edin. Şimdi çalışmanızı kaydedin.
&Window
-
+
&Spline
-
+
- Running script '%1'
-
+ Running script '%1'
+
- Inserting block '%1'
-
+ Inserting block '%1'
+
&Polyline
@@ -340,46 +341,66 @@ adresinden temin edin. Şimdi çalışmanızı kaydedin.
CTRL+M
-
+
Insert Image
-
+
Auto-saving drawing...
-
+
Auto-saved drawing
-
+
Cannot auto-save the file
%1
Please check the permissions.
Auto-save disabled.
-
+
SVN Revision: %1
-
+
Help
-
+
- Bugger, I couldn't find the helpfiles on the filesystem.
-
+ Bugger, I couldn't find the helpfiles on the filesystem.
+
&Plugins
-
+
Import
-
+
+
+
+ &Toolbars
+
+
+
+ Compiled on: %1
+
+
+
+ Program Icons Supplied by
+
+
+
+ Splash and Logo supplied by
+
+
+
+ Main Website :
+
@@ -662,15 +683,15 @@ Auto-save disabled.
CTRL-G
-
+
Restrict&Vertically
-
+
&back
-
+
@@ -692,7 +713,7 @@ Auto-save disabled.
QG_ArcTangentialOptions
Tangential Arc Options
-
+
Radius:
@@ -753,8 +774,8 @@ Auto-save disabled.
Blok İsimlendirme
- Could not name block. A block named "%1" already exists.
- Blok isimlendirilemedi. "%1" isminde bir blok zaten var.
+ Could not name block. A block named "%1" already exists.
+ Blok isimlendirilemedi. "%1" isminde bir blok zaten var.
@@ -862,7 +883,7 @@ için açar
Arc tangential to base entity with radius
-
+
@@ -986,7 +1007,7 @@ için açar
Area of polygon
-
+
@@ -1067,44 +1088,44 @@ için açar
Ana
- Show menu "Lines"
- "Çizgiler" menüsünü göster
+ Show menu "Lines"
+ "Çizgiler" menüsünü göster
- Show menu "Arcs"
- "Yaylar" menüsünü göster
+ Show menu "Arcs"
+ "Yaylar" menüsünü göster
- Show menu "Circles"
- "Çemberler" menüsünü göster
+ Show menu "Circles"
+ "Çemberler" menüsünü göster
- Show menu "Points"
- "Noktalar" menüsünü göster
+ Show menu "Points"
+ "Noktalar" menüsünü göster
- Show menu "Ellipses"
- "Elipsler" menüsünü göster
+ Show menu "Ellipses"
+ "Elipsler" menüsünü göster
- Show menu "Edit"
- "Düzenleme" menüsünü göster
+ Show menu "Edit"
+ "Düzenleme" menüsünü göster
Texts
Yazılar
- Show menu "Select"
- "Seçim" menüsünü göster
+ Show menu "Select"
+ "Seçim" menüsünü göster
Create Block
Blok Oluştur
- Show menu "Dimensions"
- "Boyutlar" menüsünü göster
+ Show menu "Dimensions"
+ "Boyutlar" menüsünü göster
Hatches / Solid Fills
@@ -1115,8 +1136,8 @@ için açar
Tarama İmgesi
- Show menu "Measure"
- "Ölçme" menüsünü göster
+ Show menu "Measure"
+ "Ölçme" menüsünü göster
Points
@@ -1124,11 +1145,11 @@ için açar
Splines
-
+
Polylines
-
+
@@ -1237,7 +1258,7 @@ için açar
QG_CadToolBarPolylines
Polylines
-
+
Back to main menu
@@ -1245,27 +1266,27 @@ için açar
Create Polyline
-
+
Delete between two nodes
-
+
Add node
-
+
Delete node
-
+
Trim segments
-
+
Append node
-
+
@@ -1398,7 +1419,7 @@ için açar
QG_CadToolBarSplines
Splines
-
+
Back to main menu
@@ -1406,7 +1427,7 @@ için açar
Spline
-
+
@@ -1540,7 +1561,7 @@ için açar
...
-
+
@@ -1774,7 +1795,7 @@ için açar
Dimension
-
+
@@ -1890,12 +1911,12 @@ için açar
Hoşgeldiniz
- <font size="+1"><b>Welcome to QCad</b>
+ <font size="+1"><b>Welcome to QCad</b>
</font>
<br>
Please choose the unit you want to use for new drawings and your preferred language.<br>
You can changes these settings later in the Options Dialog of QCad.
- <font size="+1"><b>QCad'e Hoşgeldiniz</b>
+ <font size="+1"><b>QCad'e Hoşgeldiniz</b>
</font>
<br>
Lütfen, yeni çizimde kullanmak istediğiniz birimi ve tercih ettiğiniz dili seçiniz.<br>
@@ -2064,7 +2085,7 @@ Bu ayarları daha sonra Qcad Seçenekleri penceresinden değiştirebilirsiniz.
...
-
+
@@ -2115,7 +2136,7 @@ Bu ayarları daha sonra Qcad Seçenekleri penceresinden değiştirebilirsiniz.
...
-
+
@@ -2166,11 +2187,11 @@ Bu ayarları daha sonra Qcad Seçenekleri penceresinden değiştirebilirsiniz.
...
-
+
Ctrl+S
-
+
@@ -2360,7 +2381,7 @@ Bu ayarları daha sonra Qcad Seçenekleri penceresinden değiştirebilirsiniz.
Yarıçap
- Surveyor's units
+ Surveyor's units
Müfettiş birimleri
@@ -2372,8 +2393,8 @@ Bu ayarları daha sonra Qcad Seçenekleri penceresinden değiştirebilirsiniz.
Seçenekler
- For the length formats 'Engineering' and 'Architectural', the unit must be set to Inch.
- 'Mühendislik' ve 'Mimari' uzunluk biçimlerinde birim milimetre olmalıdır.
+ For the length formats 'Engineering' and 'Architectural', the unit must be set to Inch.
+ 'Mühendislik' ve 'Mimari' uzunluk biçimlerinde birim milimetre olmalıdır.
&Grid
@@ -2381,11 +2402,11 @@ Bu ayarları daha sonra Qcad Seçenekleri penceresinden değiştirebilirsiniz.
Splines
-
+
Number of line segments per spline patch:
-
+
4
@@ -2648,46 +2669,46 @@ Bu ayarları daha sonra Qcad Seçenekleri penceresinden değiştirebilirsiniz.
Alt+S
-
+
Alt+U
-
+
Minimal Grid Spacing (px):
-
+
Program Defaults
-
+
Time between automatc saving of thedocument in minutes.
-
+
Auto save time:
-
+
QG_DlgOptionsVariables
Drawing Variables
-
+
Variable
-
+
Code
-
+
Value
-
+
&OK
@@ -2789,7 +2810,7 @@ Bu ayarları daha sonra Qcad Seçenekleri penceresinden değiştirebilirsiniz.
...
-
+
@@ -2840,7 +2861,7 @@ Bu ayarları daha sonra Qcad Seçenekleri penceresinden değiştirebilirsiniz.
...
-
+
@@ -2891,14 +2912,14 @@ Bu ayarları daha sonra Qcad Seçenekleri penceresinden değiştirebilirsiniz.
...
-
+
QG_DlgSpline
Spline
-
+
Layer:
@@ -2910,11 +2931,11 @@ Bu ayarları daha sonra Qcad Seçenekleri penceresinden değiştirebilirsiniz.
Degree:
-
+
Closed
-
+
1
@@ -3561,7 +3582,7 @@ Bu ayarları daha sonra Qcad Seçenekleri penceresinden değiştirebilirsiniz.
Alt+D
-
+
@@ -3600,7 +3621,7 @@ Bu ayarları daha sonra Qcad Seçenekleri penceresinden değiştirebilirsiniz.
again Still No Text supplied.
-
+
@@ -4206,7 +4227,7 @@ Bu ayarları daha sonra Qcad Seçenekleri penceresinden değiştirebilirsiniz.
...
-
+
@@ -4248,11 +4269,11 @@ Bu ayarları daha sonra Qcad Seçenekleri penceresinden değiştirebilirsiniz.
Tangential
-
+
Tan Radius
-
+
Angle
@@ -4279,15 +4300,15 @@ Bu ayarları daha sonra Qcad Seçenekleri penceresinden değiştirebilirsiniz.
Toggle Black / White mode
-
+
Center to page
-
+
Fit to page
-
+
@@ -4339,11 +4360,11 @@ Bu ayarları daha sonra Qcad Seçenekleri penceresinden değiştirebilirsiniz.
QG_SplineOptions
Spline Options
-
+
Degree:
-
+
1
@@ -4359,7 +4380,7 @@ Bu ayarları daha sonra Qcad Seçenekleri penceresinden değiştirebilirsiniz.
Closed
-
+
Undo
@@ -4435,99 +4456,99 @@ Bu ayarları daha sonra Qcad Seçenekleri penceresinden değiştirebilirsiniz.
0.00mm
-
+
0.05mm
-
+
0.09mm
-
+
0.13mm (ISO)
-
+
0.15mm
-
+
0.18mm (ISO)
-
+
0.20mm
-
+
0.25mm (ISO)
-
+
0.30mm
-
+
0.35mm (ISO)
-
+
0.40mm
-
+
0.50mm (ISO)
-
+
0.53mm
-
+
0.60mm
-
+
0.70mm (ISO)
-
+
0.80mm
-
+
0.90mm
-
+
1.00mm (ISO)
-
+
1.06mm
-
+
1.20mm
-
+
1.40mm (ISO)
-
+
1.58mm
-
+
2.00mm (ISO)
-
+
2.11mm
-
+
@@ -4537,8 +4558,8 @@ Bu ayarları daha sonra Qcad Seçenekleri penceresinden değiştirebilirsiniz.
Katman Özellikleri
- Layer with a name "%1" already exists. Please specify a different name.
- "%1" isminde bir katman var. Lütfen başka bir isim verin.
+ Layer with a name "%1" already exists. Please specify a different name.
+ "%1" isminde bir katman var. Lütfen başka bir isim verin.
Warning
@@ -4549,12 +4570,12 @@ Bu ayarları daha sonra Qcad Seçenekleri penceresinden değiştirebilirsiniz.
Katmanı Sil
- Layer "%1" and all entities on it will be removed.
- "%1" katmanı ve içerdiği tüm öğeler silinecek.
+ Layer "%1" and all entities on it will be removed.
+ "%1" katmanı ve içerdiği tüm öğeler silinecek.
- Layer "%1" can never be removed.
- "%1" katmanı silinemez.
+ Layer "%1" can never be removed.
+ "%1" katmanı silinemez.
Layer Dialog
@@ -4565,8 +4586,8 @@ Bu ayarları daha sonra Qcad Seçenekleri penceresinden değiştirebilirsiniz.
Bloğu Sil
- Block "%1" and all its entities will be removed.
- "%1" bloğu ve içerdiği tüm öğeler silinecek.
+ Block "%1" and all its entities will be removed.
+ "%1" bloğu ve içerdiği tüm öğeler silinecek.
@@ -4613,15 +4634,15 @@ Bu ayarları daha sonra Qcad Seçenekleri penceresinden değiştirebilirsiniz.
Portable Pixel Map
-
+
X Bitmap Format
-
+
X Pixel Map
-
+
Save Drawing As
@@ -4666,83 +4687,83 @@ Do you want to replace it?
Inch
-
+
Foot
-
+
Mile
-
+
Millimeter
-
+
Centimeter
-
+
Meter
-
+
Kilometer
-
+
Microinch
-
+
Mil
-
+
Yard
-
+
Angstrom
-
+
Nanometer
-
+
Micron
-
+
Decimeter
-
+
Decameter
-
+
Hectometer
-
+
Gigameter
-
+
Astro
-
+
Lightyear
-
+
Parsec
-
+
Export Image
@@ -4754,12 +4775,16 @@ Do you want to replace it?
Loading Library Paths..
- Kütüphaneler aranıyor..
+ Kütüphaneler aranıyor..
Loading File %1..
%1 dosyası yükleniyor..
+
+ Loading...
+
+
RS_ActionBlocksAdd
@@ -5295,11 +5320,11 @@ Do you want to replace it?
RS_ActionDrawArcTangential
Arc: Tangential
-
+
Specify base entity
-
+
Cancel
@@ -5533,11 +5558,11 @@ Do you want to replace it?
Hatch created successfully.
-
+
Invalid hatch area. Please check that the entities chosen form one or more closed contours.
-
+
@@ -6184,34 +6209,34 @@ Do you want to replace it?
Specify next point or [%1]
-
+
Specify next point
-
+
Cannot close sequence of lines: Not enough entities defined yet.
-
+
Undo disallowed due a fatal bug somewhere. Sorry.
-
+
Cannot undo: Not enough entities defined yet.
-
+
RS_ActionDrawSpline
&Spline
-
+
Specify first control point
-
+
Cancel
@@ -6219,7 +6244,7 @@ Do you want to replace it?
Specify next control point or [%1]
-
+
Back
@@ -6227,11 +6252,11 @@ Do you want to replace it?
Specify next control point
-
+
Cannot undo: Not enough entities defined yet.
-
+
@@ -6366,7 +6391,7 @@ Do you want to replace it?
&New...
-
+
@@ -6457,23 +6482,23 @@ Do you want to replace it?
RS_ActionInfoArea
Polygonal Area
-
+
Area: %1
-
+
Circumference: %1
-
+
Point: %1/%2
-
+
Specify first point of polygon
-
+
Cancel
@@ -6481,11 +6506,11 @@ Do you want to replace it?
Specify next point of polygon
-
+
Terminate
-
+
@@ -6737,8 +6762,8 @@ Do you want to replace it?
Çarpanı girin:
- Cannot open file '%1'
-
+ Cannot open file '%1'
+
@@ -6862,11 +6887,11 @@ Do you want to replace it?
&Divide
-
+
Entity must be a line, arc, circle or ellipse.
-
+
@@ -6912,35 +6937,35 @@ Do you want to replace it?
Entities not in the same polyline.
-
+
Parent of second entity is not a polyline
-
+
Parent of second entity is NULL
-
+
One of the chosen entities is NULL
-
+
Parent of first entity is not a polyline
-
+
Parent of first entity is NULL
-
+
First entity is NULL
-
+
Second entity is NULL
-
+
@@ -7369,11 +7394,11 @@ Do you want to replace it?
&Add node
-
+
- Add polyline's node
-
+ Add polyline's node
+
No Entity found.
@@ -7381,23 +7406,23 @@ Do you want to replace it?
Entity must be a polyline.
-
+
Adding point is invalid.
-
+
Adding point is not on entity.
-
+
Specify polyline to add nodes
-
+
- Specify adding node's point
-
+ Specify adding node's point
+
@@ -7408,11 +7433,11 @@ Do you want to replace it?
A&ppend node
-
+
- Append polyline's node
-
+ Append polyline's node
+
No Entity found.
@@ -7420,19 +7445,19 @@ Do you want to replace it?
Entity must be a polyline.
-
+
Click somewhere near the beginning or end of existing polyline.
-
+
Specify the polyline somewhere near the beginning or end point
-
+
Specify next point or [%1]
-
+
Back
@@ -7440,7 +7465,7 @@ Do you want to replace it?
Specify next point
-
+
@@ -7455,11 +7480,11 @@ Do you want to replace it?
&Delete node
-
+
- Delete polyline's node
-
+ Delete polyline's node
+
No Entity found.
@@ -7467,23 +7492,23 @@ Do you want to replace it?
Entity must be a polyline.
-
+
Adding point is invalid.
-
+
Adding point is not on entity.
-
+
Specify polyline to delete node
-
+
- Specify deleting node's point
-
+ Specify deleting node's point
+
@@ -7498,11 +7523,11 @@ Do you want to replace it?
Delete &between two nodes
-
+
Delete between two nodes
-
+
No Entity found.
@@ -7510,42 +7535,42 @@ Do you want to replace it?
Entity must be a polyline.
-
+
Deletinging point is invalid.
-
+
Deleting point is not on entity.
-
+
Deleteinging point is not on entity.
-
+
Specify polyline to delete between two nodes
-
+
Specify first node
-
+
Specify second node
-
+
RS_ActionPolylineEquidistant
Create &Equidistant Polylines
-
+
Create Equidistant Polylines
-
+
No Entity found.
@@ -7553,11 +7578,11 @@ Do you want to replace it?
Entity must be a polyline.
-
+
Choose the original polyline
-
+
Cancel
@@ -7568,11 +7593,11 @@ Do you want to replace it?
RS_ActionPolylineSegment
Create Polyline from Existing &Segments
-
+
Create Polyline from Existing Segments
-
+
No Entity found.
@@ -7580,11 +7605,11 @@ Do you want to replace it?
Entity must be a line or arc.
-
+
Choose one of the segments on the original polyline
-
+
Cancel
@@ -7603,11 +7628,11 @@ Do you want to replace it?
&Trim segments
-
+
- Trim polyline's segments
-
+ Trim polyline's segments
+
No Entity found.
@@ -7615,27 +7640,27 @@ Do you want to replace it?
Entity must be a polyline.
-
+
Specifying point is invalid.
-
+
No Segment found on entity.
-
+
Specify polyline to trim
-
+
Specify first segment
-
+
Specify second segment
-
+
@@ -7681,7 +7706,7 @@ Do you want to replace it?
Ctrl+K
-
+
@@ -7964,7 +7989,7 @@ Do you want to replace it?
RS_ActionZoomPrevious
&Previous View
-
+
@@ -8632,11 +8657,11 @@ Do you want to replace it?
l
-
+
a
-
+
ci
@@ -8663,15 +8688,15 @@ Do you want to replace it?
zv
zoom - previous
-
+
r
-
+
polyline
-
+
pa
@@ -8681,7 +8706,7 @@ Do you want to replace it?
tm
modify - multi trim (extend)
-
+
da
@@ -8705,7 +8730,7 @@ Do you want to replace it?
tm
-
+
xt
@@ -8773,7 +8798,7 @@ Do you want to replace it?
sn
-
+
sm
@@ -8789,20 +8814,20 @@ Do you want to replace it?
kill
-
+
k
-
+
back
-
+
b
back
-
+
diff --git a/ts/librecad_uk.ts b/ts/librecad_uk.ts
index defb9e3854..d78e6da2c2 100644
--- a/ts/librecad_uk.ts
+++ b/ts/librecad_uk.ts
@@ -1,13 +1,14 @@
+
QC_ApplicationWindow
- Running script '%1'
+ Running script '%1'
Виконання сценарію „%1“
- Inserting block '%1'
+ Inserting block '%1'
Вставка блоку „%1“
@@ -155,7 +156,7 @@
Створення нового файлу …
- Block '%1'
+ Block '%1'
Блок „%1“
@@ -219,99 +220,115 @@ Please check the permissions.
%1
Please check the permissions.
Auto-save disabled.
-
+
Exporting drawing...
-
+
Exported: %1
-
+
Exporting...
-
+
Export complete
-
+
Export failed!
-
+
Printing...
-
+
Printing complete
-
+
Print preview for %1
-
+
Exiting application...
-
+
None
-
+
About...
-
+
Version: %1 %2
-
+
SVN Revision: %1
-
-
-
- Date: %1
-
+
Modules: %1
-
+
Help
-
+
- Bugger, I couldn't find the helpfiles on the filesystem.
-
+ Bugger, I couldn't find the helpfiles on the filesystem.
+
&Plugins
-
+
Import
-
+
+
+
+ &Toolbars
+
+
+
+ Compiled on: %1
+
+
+
+ Program Icons Supplied by
+
+
+
+ Splash and Logo supplied by
+
+
+
+ Main Website :
+
QC_MDIWindow
Do you really want to close the drawing?
-
+
Do you really want to close the file
%1?
-
+
Closing Drawing
-
+
@@ -506,7 +523,7 @@ Auto-save disabled.
(De-)Selects connected entities
- Вибирає (або скасовує вибір) об'єктів, що утворюють замкнутий контур
+ Вибирає (або скасовує вибір) об'єктів, що утворюють замкнутий контур
Select All
@@ -1802,15 +1819,15 @@ Auto-save disabled.
CTRL-G
-
+
Restrict&Vertically
-
+
&back
-
+
@@ -1832,7 +1849,7 @@ Auto-save disabled.
QG_ArcTangentialOptions
Tangential Arc Options
-
+
Radius:
@@ -1881,7 +1898,7 @@ Auto-save disabled.
Перейменування блоку
- Could not name block. A block named "%1" already exists.
+ Could not name block. A block named "%1" already exists.
Перейменування блоку неможливе. Блок з назвою „%1“ вже існує.
@@ -2001,7 +2018,7 @@ in a separate window
Arc tangential to base entity with radius
-
+
@@ -2125,7 +2142,7 @@ in a separate window
Area of polygon
-
+
@@ -2206,27 +2223,27 @@ in a separate window
Головна
- Show menu "Lines"
+ Show menu "Lines"
Показати меню „Лінії“
- Show menu "Arcs"
+ Show menu "Arcs"
Показати меню „Дуги“
- Show menu "Circles"
+ Show menu "Circles"
Показати меню „Кола“
- Show menu "Points"
+ Show menu "Points"
Показати меню „Точки“
- Show menu "Measure"
+ Show menu "Measure"
Показати меню „Вимір“
- Show menu "Ellipses"
+ Show menu "Ellipses"
Показати меню „Еліпси“
@@ -2234,11 +2251,11 @@ in a separate window
Штрихування/заливання кольором
- Show menu "Edit"
+ Show menu "Edit"
Показати меню „Редагування“
- Show menu "Dimensions"
+ Show menu "Dimensions"
Показати меню „Розміри“
@@ -2246,7 +2263,7 @@ in a separate window
Тексти
- Show menu "Select"
+ Show menu "Select"
Показати меню „Вибір“
@@ -2392,23 +2409,23 @@ in a separate window
Delete between two nodes
-
+
Add node
-
+
Delete node
-
+
Trim segments
-
+
Append node
-
+
@@ -2659,31 +2676,31 @@ in a separate window
ø
-
+
°
-
+
±
-
+
¶
-
+
×
-
+
÷
-
+
...
-
+
@@ -2917,7 +2934,7 @@ in a separate window
Dimension
-
+
@@ -3033,12 +3050,12 @@ in a separate window
Ласкаво просимо
- <font size="+1"><b>Welcome to QCad </b>
+ <font size="+1"><b>Welcome to QCad </b>
</font>
<br>
Please choose the unit you want to use for new drawings and your preferred language.<br>
You can changes these settings later in the Options Dialog of QCad.
- <font size="+1"><b> Ласкаво просимо до QCad </b>
+ <font size="+1"><b> Ласкаво просимо до QCad </b>
</font>
<br>
Будь ласка, виберіть одиниці вимірювання для нових креслень та вибір мови<br>
@@ -3065,12 +3082,12 @@ You can changes these settings later in the Options Dialog of QCad.
Ввід
- <font size="+1"><b>Welcome to QCad</b>
+ <font size="+1"><b>Welcome to QCad</b>
</font>
<br>
Please choose the unit you want to use for new drawings and your preferred language.<br>
You can changes these settings later in the Options Dialog of QCad.
-
+
@@ -3215,7 +3232,7 @@ You can changes these settings later in the Options Dialog of QCad.
...
-
+
@@ -3266,7 +3283,7 @@ You can changes these settings later in the Options Dialog of QCad.
...
-
+
@@ -3317,11 +3334,11 @@ You can changes these settings later in the Options Dialog of QCad.
...
-
+
Ctrl+S
-
+
@@ -3415,15 +3432,15 @@ You can changes these settings later in the Options Dialog of QCad.
Градіани
- Surveyor's units
-
+ Surveyor's units
+
Options
Параметри
- For the length formats 'Engineering' and 'Architectural', the unit must be set to Inch.
+ For the length formats 'Engineering' and 'Architectural', the unit must be set to Inch.
Для форматів довжин „Інженерний“ та „Архітектурний“ як одиниць виміру повинні бути обрані дюйми.
@@ -3540,7 +3557,7 @@ You can changes these settings later in the Options Dialog of QCad.
Number of line segments per spline patch:
-
+
4
@@ -3576,7 +3593,7 @@ You can changes these settings later in the Options Dialog of QCad.
P&recision:
-
+
@@ -3803,74 +3820,74 @@ You can changes these settings later in the Options Dialog of QCad.
Alt+U
-
+
Minimal Grid Spacing (px):
-
+
#000000
-
+
#ffffff
-
+
#c0c0c0
-
+
#808080
-
+
#404040
-
+
#a54747
-
+
#739373
-
+
Program Defaults
-
+
Time between automatc saving of thedocument in minutes.
-
+
Auto save time:
-
+
QG_DlgOptionsVariables
Drawing Variables
-
+
Variable
-
+
Code
-
+
Value
-
+
&OK
-
+
Alt+O
@@ -3968,7 +3985,7 @@ You can changes these settings later in the Options Dialog of QCad.
...
-
+
@@ -4019,7 +4036,7 @@ You can changes these settings later in the Options Dialog of QCad.
...
-
+
@@ -4070,7 +4087,7 @@ You can changes these settings later in the Options Dialog of QCad.
...
-
+
@@ -4089,11 +4106,11 @@ You can changes these settings later in the Options Dialog of QCad.
Degree:
-
+
Closed
-
+
1
@@ -4284,435 +4301,435 @@ You can changes these settings later in the Options Dialog of QCad.
[0000-007F] Basic Latin
-
+
[0080-00FF] Latin-1 Supplementary
-
+
[0100-017F] Latin Extended-A
-
+
[0180-024F] Latin Extended-B
-
+
[0250-02AF] IPA Extensions
-
+
[02B0-02FF] Spacing Modifier Letters
-
+
[0300-036F] Combining Diacritical Marks
-
+
[0370-03FF] Greek and Coptic
-
+
[0400-04FF] Cyrillic
-
+
[0500-052F] Cyrillic Supplementary
-
+
[0530-058F] Armenian
-
+
[0590-05FF] Hebrew
-
+
[0600-06FF] Arabic
-
+
[0700-074F] Syriac
-
+
[0780-07BF] Thaana
-
+
[0900-097F] Devanagari
-
+
[0980-09FF] Bengali
-
+
[0A00-0A7F] Gurmukhi
-
+
[0A80-0AFF] Gujarati
-
+
[0B00-0B7F] Oriya
-
+
[0B80-0BFF] Tamil
-
+
[0C00-0C7F] Telugu
-
+
[0C80-0CFF] Kannada
-
+
[0D00-0D7F] Malayalam
-
+
[0D80-0DFF] Sinhala
-
+
[0E00-0E7F] Thai
-
+
[0E80-0EFF] Lao
-
+
[0F00-0FFF] Tibetan
-
+
[1000-109F] Myanmar
-
+
[10A0-10FF] Georgian
-
+
[1100-11FF] Hangul Jamo
-
+
[1200-137F] Ethiopic
-
+
[13A0-13FF] Cherokee
-
+
[1400-167F] Unified Canadian Aboriginal Syllabic
-
+
[1680-169F] Ogham
-
+
[16A0-16FF] Runic
-
+
[1700-171F] Tagalog
-
+
[1720-173F] Hanunoo
-
+
[1740-175F] Buhid
-
+
[1760-177F] Tagbanwa
-
+
[1780-17FF] Khmer
-
+
[1800-18AF] Mongolian
-
+
[1E00-1EFF] Latin Extended Additional
-
+
[1F00-1FFF] Greek Extended
-
+
[2000-206F] General Punctuation
-
+
[2070-209F] Superscripts and Subscripts
-
+
[20A0-20CF] Currency Symbols
-
+
[20D0-20FF] Combining Marks for Symbols
-
+
[2100-214F] Letterlike Symbols
-
+
[2150-218F] Number Forms
-
+
[2190-21FF] Arrows
-
+
[2200-22FF] Mathematical Operators
-
+
[2300-23FF] Miscellaneous Technical
-
+
[2400-243F] Control Pictures
-
+
[2440-245F] Optical Character Recognition
-
+
[2460-24FF] Enclosed Alphanumerics
-
+
[2500-257F] Box Drawing
-
+
[2580-259F] Block Elements
-
+
[25A0-25FF] Geometric Shapes
-
+
[2600-26FF] Miscellaneous Symbols
-
+
[2700-27BF] Dingbats
-
+
[27C0-27EF] Miscellaneous Mathematical Symbols-A
-
+
[27F0-27FF] Supplemental Arrows-A
-
+
[2800-28FF] Braille Patterns
-
+
[2900-297F] Supplemental Arrows-B
-
+
[2980-29FF] Miscellaneous Mathematical Symbols-B
-
+
[2A00-2AFF] Supplemental Mathematical Operators
-
+
[2E80-2EFF] CJK Radicals Supplement
-
+
[2F00-2FDF] Kangxi Radicals
-
+
[2FF0-2FFF] Ideographic Description Characters
-
+
[3000-303F] CJK Symbols and Punctuation
-
+
[3040-309F] Hiragana
-
+
[30A0-30FF] Katakana
-
+
[3100-312F] Bopomofo
-
+
[3130-318F] Hangul Compatibility Jamo
-
+
[3190-319F] Kanbun
-
+
[31A0-31BF] Bopomofo Extended
-
+
[3200-32FF] Enclosed CJK Letters and Months
-
+
[3300-33FF] CJK Compatibility
-
+
[3400-4DBF] CJK Unified Ideographs Extension A
-
+
[4E00-9FAF] CJK Unified Ideographs
-
+
[A000-A48F] Yi Syllables
-
+
[A490-A4CF] Yi Radicals
-
+
[AC00-D7AF] Hangul Syllables
-
+
[D800-DBFF] High Surrogates
-
+
[DC00-DFFF] Low Surrogate Area
-
+
[E000-F8FF] Private Use Area
-
+
[F900-FAFF] CJK Compatibility Ideographs
-
+
[FB00-FB4F] Alphabetic Presentation Forms
-
+
[FB50-FDFF] Arabic Presentation Forms-A
-
+
[FE00-FE0F] Variation Selectors
-
+
[FE20-FE2F] Combining Half Marks
-
+
[FE30-FE4F] CJK Compatibility Forms
-
+
[FE50-FE6F] Small Form Variants
-
+
[FE70-FEFF] Arabic Presentation Forms-B
-
+
[FF00-FFEF] Halfwidth and Fullwidth Forms
-
+
[FFF0-FFFF] Specials
-
+
[10300-1032F] Old Italic
-
+
[10330-1034F] Gothic
-
+
[10400-1044F] Deseret
-
+
[1D000-1D0FF] Byzantine Musical Symbols
-
+
[1D100-1D1FF] Musical Symbols
-
+
[1D400-1D7FF] Mathematical Alphanumeric Symbols
-
+
[20000-2A6DF] CJK Unified Ideographs Extension B
-
+
[2F800-2FA1F] CJK Compatibility Ideographs Supplement
-
+
[E0000-E007F] Tags
-
+
[F0000-FFFFD] Supplementary Private Use Area-A
-
+
[100000-10FFFD] Supplementary Private Use Area-B
-
+
&Height:
@@ -4740,11 +4757,11 @@ You can changes these settings later in the Options Dialog of QCad.
Alt+D
-
+
Pi (π)
-
+
@@ -4783,7 +4800,7 @@ You can changes these settings later in the Options Dialog of QCad.
again Still No Text supplied.
-
+
@@ -5389,7 +5406,7 @@ You can changes these settings later in the Options Dialog of QCad.
...
-
+
@@ -5431,11 +5448,11 @@ You can changes these settings later in the Options Dialog of QCad.
Tangential
-
+
Tan Radius
-
+
Angle
@@ -5526,7 +5543,7 @@ You can changes these settings later in the Options Dialog of QCad.
Degree:
-
+
1
@@ -5542,7 +5559,7 @@ You can changes these settings later in the Options Dialog of QCad.
Closed
-
+
Undo
@@ -5724,11 +5741,11 @@ You can changes these settings later in the Options Dialog of QCad.
Вилучити шар
- Layer "%1" and all entities on it will be removed.
+ Layer "%1" and all entities on it will be removed.
Шар „%1“ та усі об’єкти на ньому будуть вилучені.
- Layer "%1" can never be removed.
+ Layer "%1" can never be removed.
Шар „%1“ ніколи не можна вилучати.
@@ -5740,7 +5757,7 @@ You can changes these settings later in the Options Dialog of QCad.
Вилучити блок
- Block "%1" and all its entities will be removed.
+ Block "%1" and all its entities will be removed.
Блок „%1“ та усі його об’єкти будуть вилучені.
@@ -5748,7 +5765,7 @@ You can changes these settings later in the Options Dialog of QCad.
Властивості шару
- Layer with a name "%1" already exists. Please specify a different name.
+ Layer with a name "%1" already exists. Please specify a different name.
Шар з назвою „%1“ вже існує. Вкажіть, будь ласка, іншу назву.
@@ -5790,35 +5807,35 @@ Do you want to replace it?
Joint Photographic Experts Group
-
+
Multiple-image Network Graphics
-
+
Portable Bit Map
-
+
Portable Grey Map
-
+
Portable Network Graphic
-
+
Portable Pixel Map
-
+
X Bitmap Format
-
+
X Pixel Map
-
+
All Image Files (%1)
@@ -5826,11 +5843,11 @@ Do you want to replace it?
Graphics Interchange Format
-
+
Drawing Exchange %1
-
+
QCad 1.x file %1
@@ -5846,99 +5863,99 @@ Do you want to replace it?
None
-
+
Inch
-
+
Foot
-
+
Mile
-
+
Millimeter
-
+
Centimeter
-
+
Meter
-
+
Kilometer
-
+
Microinch
-
+
Mil
-
+
Yard
-
+
Angstrom
-
+
Nanometer
-
+
Micron
-
+
Decimeter
-
+
Decameter
-
+
Hectometer
-
+
Gigameter
-
+
Astro
-
+
Lightyear
-
+
Parsec
-
+
Loading..
-
+
- Loading Library Paths..
-
+ Loading File %1..
+
- Loading File %1..
-
+ Loading...
+
@@ -5952,7 +5969,7 @@ Do you want to replace it?
RS_ActionBlocksAttributes
&Rename Block
-
+
@@ -5963,7 +5980,7 @@ Do you want to replace it?
Specify reference point
-
+
Cancel
@@ -6003,11 +6020,11 @@ Do you want to replace it?
Not a valid expression
-
+
Specify reference point
-
+
Cancel
@@ -6015,27 +6032,27 @@ Do you want to replace it?
Enter angle:
-
+
Enter factor:
-
+
Enter columns:
-
+
Enter rows:
-
+
Enter column spacing:
-
+
Enter row spacing:
-
+
@@ -6056,11 +6073,11 @@ Do you want to replace it?
RS_ActionDefault
Choose second edge
-
+
Back
-
+
@@ -6071,7 +6088,7 @@ Do you want to replace it?
Specify first extension line origin
-
+
Cancel
@@ -6079,19 +6096,19 @@ Do you want to replace it?
Specify second extension line origin
-
+
Back
-
+
Specify dimension line location
-
+
Enter dimension text:
-
+
@@ -6102,7 +6119,7 @@ Do you want to replace it?
Select first line
-
+
Cancel
@@ -6110,15 +6127,15 @@ Do you want to replace it?
Select second line
-
+
Specify dimension arc line location
-
+
Enter dimension text:
-
+
@@ -6129,15 +6146,15 @@ Do you want to replace it?
Not a circle or arc entity
-
+
Not a valid expression
-
+
Select arc or circle entity
-
+
Cancel
@@ -6145,11 +6162,11 @@ Do you want to replace it?
Specify dimension line location
-
+
Enter dimension text:
-
+
@@ -6160,7 +6177,7 @@ Do you want to replace it?
Specify target point
-
+
Cancel
@@ -6168,11 +6185,11 @@ Do you want to replace it?
Specify next point
-
+
Finish
-
+
@@ -6191,11 +6208,11 @@ Do you want to replace it?
Not a valid expression
-
+
Specify first extension line origin
-
+
Cancel
@@ -6203,23 +6220,23 @@ Do you want to replace it?
Specify second extension line origin
-
+
Back
-
+
Specify dimension line location
-
+
Enter dimension text:
-
+
Enter dimension line angle:
-
+
@@ -6230,15 +6247,15 @@ Do you want to replace it?
Not a circle or arc entity
-
+
Not a valid expression
-
+
Select arc or circle entity
-
+
Cancel
@@ -6246,11 +6263,11 @@ Do you want to replace it?
Specify dimension line position or enter angle:
-
+
Enter dimension text:
-
+
@@ -6261,15 +6278,15 @@ Do you want to replace it?
Not a valid expression
-
+
Not a valid chord length
-
+
Specify center
-
+
Cancel
@@ -6277,27 +6294,27 @@ Do you want to replace it?
Specify radius
-
+
Back
-
+
Specify start angle:
-
+
Specify end angle or [Angle/chord Length]
-
+
Specify included angle:
-
+
Specify chord length:
-
+
@@ -6308,11 +6325,11 @@ Do you want to replace it?
Invalid arc data.
-
+
Specify startpoint or [Center]
-
+
Cancel
@@ -6320,26 +6337,26 @@ Do you want to replace it?
Specify second point
-
+
Back
-
+
Specify endpoint
-
+
RS_ActionDrawArcTangential
Arc: Tangential
-
+
Specify base entity
-
+
Cancel
@@ -6347,11 +6364,11 @@ Do you want to replace it?
Specify end angle
-
+
Back
-
+
@@ -6362,11 +6379,11 @@ Do you want to replace it?
Not a valid expression
-
+
Specify center
-
+
Cancel
@@ -6374,11 +6391,11 @@ Do you want to replace it?
Specify radius
-
+
Back
-
+
@@ -6389,11 +6406,11 @@ Do you want to replace it?
Invalid Circle data.
-
+
Specify first point
-
+
Cancel
@@ -6401,11 +6418,11 @@ Do you want to replace it?
Specify second point
-
+
Back
-
+
@@ -6416,11 +6433,11 @@ Do you want to replace it?
Invalid circle data.
-
+
Specify first point
-
+
Cancel
@@ -6428,15 +6445,15 @@ Do you want to replace it?
Specify second point
-
+
Back
-
+
Specify third point
-
+
@@ -6447,11 +6464,11 @@ Do you want to replace it?
Not a valid expression
-
+
Specify circle center
-
+
Cancel
@@ -6459,11 +6476,11 @@ Do you want to replace it?
Specify circle radius
-
+
Back
-
+
@@ -6478,11 +6495,11 @@ Do you want to replace it?
Not a valid expression
-
+
Specify ellipse center
-
+
Cancel
@@ -6490,23 +6507,23 @@ Do you want to replace it?
Specify endpoint of major axis
-
+
Back
-
+
Specify endpoint or length of minor axis:
-
+
Specify start angle
-
+
Specify end angle
-
+
@@ -6517,11 +6534,11 @@ Do you want to replace it?
Hatch created successfully.
-
+
Invalid hatch area. Please check that the entities chosen form one or more closed contours.
-
+
@@ -6532,11 +6549,11 @@ Do you want to replace it?
Not a valid expression
-
+
Specify reference point
-
+
Cancel
@@ -6544,11 +6561,11 @@ Do you want to replace it?
Enter angle:
-
+
Enter factor:
-
+
@@ -6559,7 +6576,7 @@ Do you want to replace it?
Specify first point
-
+
Cancel
@@ -6567,23 +6584,23 @@ Do you want to replace it?
Specify next point or [%1]
-
+
Back
-
+
Specify next point
-
+
Cannot close sequence of lines: Not enough entities defined yet.
-
+
Cannot undo: Not enough entities defined yet.
-
+
@@ -6602,11 +6619,11 @@ Do you want to replace it?
Not a valid expression
-
+
Specify position
-
+
Cancel
@@ -6614,15 +6631,15 @@ Do you want to replace it?
Enter angle:
-
+
Back
-
+
Enter length:
-
+
@@ -6633,11 +6650,11 @@ Do you want to replace it?
Not a valid expression
-
+
Select first line
-
+
Cancel
@@ -6645,19 +6662,19 @@ Do you want to replace it?
Select second line
-
+
Back
-
+
Enter bisector length:
-
+
Enter number of bisectors:
-
+
@@ -6668,7 +6685,7 @@ Do you want to replace it?
Click and drag to draw a line
-
+
Cancel
@@ -6683,7 +6700,7 @@ Do you want to replace it?
Specify first point
-
+
Cancel
@@ -6691,11 +6708,11 @@ Do you want to replace it?
Specify second point
-
+
Back
-
+
@@ -6710,7 +6727,7 @@ Do you want to replace it?
Specify Distance <%1> or select entity or [%2]
-
+
Cancel
@@ -6718,15 +6735,15 @@ Do you want to replace it?
Enter number:
-
+
Not a valid expression
-
+
Not a valid number. Try 1..99
-
+
@@ -6737,7 +6754,7 @@ Do you want to replace it?
Select entity
-
+
Cancel
@@ -6745,11 +6762,11 @@ Do you want to replace it?
Specify through point
-
+
Back
-
+
Number:
@@ -6757,11 +6774,11 @@ Do you want to replace it?
Not a valid number. Try 1..99
-
+
Not a valid expression
-
+
@@ -6772,23 +6789,23 @@ Do you want to replace it?
Specify center
-
+
Specify a corner
-
+
Enter number:
-
+
Not a valid number. Try 1..9999
-
+
Not a valid expression
-
+
@@ -6799,7 +6816,7 @@ Do you want to replace it?
Specify first corner
-
+
Cancel
@@ -6807,11 +6824,11 @@ Do you want to replace it?
Specify second corner
-
+
Back
-
+
Number:
@@ -6819,11 +6836,11 @@ Do you want to replace it?
Not a valid number. Try 1..9999
-
+
Not a valid expression.
-
+
@@ -6834,7 +6851,7 @@ Do you want to replace it?
Specify first corner
-
+
Cancel
@@ -6842,11 +6859,11 @@ Do you want to replace it?
Specify second corner
-
+
Back
-
+
@@ -6861,11 +6878,11 @@ Do you want to replace it?
Not a valid expression
-
+
Select base entity
-
+
Cancel
@@ -6873,11 +6890,11 @@ Do you want to replace it?
Specify position
-
+
Back
-
+
@@ -6888,7 +6905,7 @@ Do you want to replace it?
Specify point
-
+
Cancel
@@ -6896,11 +6913,11 @@ Do you want to replace it?
Select circle, arc or ellipse
-
+
Back
-
+
@@ -6911,7 +6928,7 @@ Do you want to replace it?
Select first circle or arc
-
+
Cancel
@@ -6919,11 +6936,11 @@ Do you want to replace it?
Select second circle or arc
-
+
Back
-
+
@@ -6934,7 +6951,7 @@ Do you want to replace it?
Specify location
-
+
Cancel
@@ -6945,15 +6962,15 @@ Do you want to replace it?
RS_ActionDrawPolyline
&Polyline
-
+ &Ламана
Draw polylines
-
+
Specify first point
-
+
Cancel
@@ -6961,38 +6978,38 @@ Do you want to replace it?
Specify next point or [%1]
-
+
Back
-
+
Specify next point
-
+
Cannot close sequence of lines: Not enough entities defined yet.
-
+
Undo disallowed due a fatal bug somewhere. Sorry.
-
+
Cannot undo: Not enough entities defined yet.
-
+
RS_ActionDrawSpline
&Spline
-
+ &Сплайн
Specify first control point
-
+
Cancel
@@ -7000,19 +7017,19 @@ Do you want to replace it?
Specify next control point or [%1]
-
+
Back
-
+
Specify next control point
-
+
Cannot undo: Not enough entities defined yet.
-
+
@@ -7023,7 +7040,7 @@ Do you want to replace it?
Specify insertion point
-
+
Cancel
@@ -7031,11 +7048,11 @@ Do you want to replace it?
Enter text:
-
+
Back
-
+
@@ -7050,7 +7067,7 @@ Do you want to replace it?
Specify reference point
-
+
Cancel
@@ -7065,7 +7082,7 @@ Do you want to replace it?
Set reference point
-
+
Cancel
@@ -7087,7 +7104,7 @@ Do you want to replace it?
RS_ActionFileNew
&New...
-
+
@@ -7119,15 +7136,15 @@ Do you want to replace it?
Angle: %1%2
-
+
Lines are parallel
-
+
Specify first line
-
+
Cancel
@@ -7135,34 +7152,34 @@ Do you want to replace it?
Specify second line
-
+
Back
-
+
RS_ActionInfoArea
Polygonal Area
-
+
Area: %1
-
+
Circumference: %1
-
+
Point: %1/%2
-
+
Specify first point of polygon
-
+
Cancel
@@ -7170,11 +7187,11 @@ Do you want to replace it?
Specify next point of polygon
-
+
Terminate
-
+
@@ -7185,11 +7202,11 @@ Do you want to replace it?
Distance: %1
-
+
Specify first point of distance
-
+
Cancel
@@ -7197,11 +7214,11 @@ Do you want to replace it?
Specify second point of distance
-
+
Back
-
+
@@ -7212,11 +7229,11 @@ Do you want to replace it?
Distance: %1
-
+
Specify entity
-
+
Cancel
@@ -7224,11 +7241,11 @@ Do you want to replace it?
Specify point
-
+
Back
-
+
@@ -7239,15 +7256,15 @@ Do you want to replace it?
Point is inside selected contour.
-
+
Point is outside selected contour.
-
+
Specify point
-
+
Cancel
@@ -7262,11 +7279,11 @@ Do you want to replace it?
Total Length of selected entities: %1
-
+
At least one of the selected entities cannot be measured.
-
+
@@ -7305,7 +7322,7 @@ Do you want to replace it?
RS_ActionLayersToggleLock
Toggle Layer Lock
-
+
@@ -7319,19 +7336,19 @@ Do you want to replace it?
RS_ActionLibraryInsert
Insert Library Object
-
+
- Cannot open file '%1'
-
+ Cannot open file '%1'
+
Not a valid expression
-
+
Specify reference point
-
+
Cancel
@@ -7339,11 +7356,11 @@ Do you want to replace it?
Enter angle:
-
+
Enter factor:
-
+
@@ -7368,11 +7385,11 @@ Do you want to replace it?
Not a valid expression
-
+
Select first entity
-
+
Cancel
@@ -7380,46 +7397,46 @@ Do you want to replace it?
Select second entity
-
+
Back
-
+
Enter length 1:
-
+
Enter length 2:
-
+
RS_ActionModifyCut
&Divide
-
+
No Entity found.
-
+
Entity must be a line, arc, circle or ellipse.
-
+
Cutting point is invalid.
-
+
Cutting point is not on entity.
-
+
Specify entity to cut
-
+
Cancel
@@ -7427,11 +7444,11 @@ Do you want to replace it?
Specify cutting point
-
+
Back
-
+
@@ -7449,39 +7466,39 @@ Do you want to replace it?
Entities not in the same polyline.
-
+
Parent of second entity is not a polyline
-
+
Parent of second entity is NULL
-
+
One of the chosen entities is NULL
-
+
Parent of first entity is not a polyline
-
+
Parent of first entity is NULL
-
+
First entity is NULL
-
+
Second entity is NULL
-
+
Specify first break point on a polyline
-
+
Cancel
@@ -7489,11 +7506,11 @@ Do you want to replace it?
Specify second break point on the same polyline
-
+
Back
-
+
@@ -7504,7 +7521,7 @@ Do you want to replace it?
Pick entity to delete
-
+
Cancel
@@ -7522,7 +7539,7 @@ Do you want to replace it?
RS_ActionModifyExplodeText
&Explode Text into Letters
-
+
@@ -7533,7 +7550,7 @@ Do you want to replace it?
Specify first point of mirror line
-
+
Cancel
@@ -7541,22 +7558,22 @@ Do you want to replace it?
Specify second point of mirror line
-
+
Back
-
+
RS_ActionModifyMove
&Move / Copy
-
+
Specify reference point
-
+
Cancel
@@ -7564,11 +7581,11 @@ Do you want to replace it?
Specify target point
-
+
Back
-
+
@@ -7579,11 +7596,11 @@ Do you want to replace it?
Not a valid expression
-
+
Specify reference point
-
+
Cancel
@@ -7591,15 +7608,15 @@ Do you want to replace it?
Specify target point
-
+
Back
-
+
Enter rotation angle:
-
+
@@ -7610,11 +7627,11 @@ Do you want to replace it?
Specify reference point
-
+
Back
-
+
@@ -7625,7 +7642,7 @@ Do you want to replace it?
Specify absolute reference point
-
+
Cancel
@@ -7633,11 +7650,11 @@ Do you want to replace it?
Specify relative reference point
-
+
Back
-
+
@@ -7648,23 +7665,23 @@ Do you want to replace it?
Not a valid expression
-
+
Specify first entity
-
+
Back
-
+
Specify second entity
-
+
Enter radius:
-
+
Cancel
@@ -7679,7 +7696,7 @@ Do you want to replace it?
Specify reference point
-
+
Cancel
@@ -7694,7 +7711,7 @@ Do you want to replace it?
Specify first corner
-
+
Cancel
@@ -7702,19 +7719,19 @@ Do you want to replace it?
Specify second corner
-
+
Back
-
+
Specify reference point
-
+
Specify target point
-
+
@@ -7729,7 +7746,7 @@ Do you want to replace it?
Select first trim entity
-
+
Cancel
@@ -7737,19 +7754,19 @@ Do you want to replace it?
Select limiting entity
-
+
Back
-
+
Select second trim entity
-
+
Select entity to trim
-
+
@@ -7760,27 +7777,27 @@ Do you want to replace it?
No entity found.
-
+
The chosen Entity is in a block. Please edit the block.
-
+
The chosen Entity is not an atomic entity or cannot be trimmed.
-
+
Not a valid expression
-
+
Select entity to trim or enter distance:
-
+
Back
-
+
@@ -7794,70 +7811,70 @@ Do you want to replace it?
RS_ActionPolylineAdd
&Add node
-
+
- Add polyline's node
-
+ Add polyline's node
+
No Entity found.
-
+
Entity must be a polyline.
-
+
Adding point is invalid.
-
+
Adding point is not on entity.
-
+
Specify polyline to add nodes
-
+
Cancel
Відміна
- Specify adding node's point
-
+ Specify adding node's point
+
Back
-
+
RS_ActionPolylineAppend
A&ppend node
-
+
- Append polyline's node
-
+ Append polyline's node
+
No Entity found.
-
+
Entity must be a polyline.
-
+
Click somewhere near the beginning or end of existing polyline.
-
+
Specify the polyline somewhere near the beginning or end point
-
+
Cancel
@@ -7865,93 +7882,93 @@ Do you want to replace it?
Specify next point or [%1]
-
+
Back
-
+
Specify next point
-
+
RS_ActionPolylineDel
&Delete node
-
+
- Delete polyline's node
-
+ Delete polyline's node
+
No Entity found.
-
+
Entity must be a polyline.
-
+
Adding point is invalid.
-
+
Adding point is not on entity.
-
+
Specify polyline to delete node
-
+
Cancel
Відміна
- Specify deleting node's point
-
+ Specify deleting node's point
+
Back
-
+
RS_ActionPolylineDelBetween
Delete &between two nodes
-
+
Delete between two nodes
-
+
No Entity found.
-
+
Entity must be a polyline.
-
+
Deletinging point is invalid.
-
+
Deleting point is not on entity.
-
+
Deleteinging point is not on entity.
-
+
Specify polyline to delete between two nodes
-
+
Cancel
@@ -7959,38 +7976,38 @@ Do you want to replace it?
Specify first node
-
+
Back
-
+
Specify second node
-
+
RS_ActionPolylineEquidistant
Create &Equidistant Polylines
-
+
Create Equidistant Polylines
-
+
No Entity found.
-
+
Entity must be a polyline.
-
+
Choose the original polyline
-
+
Cancel
@@ -8001,23 +8018,23 @@ Do you want to replace it?
RS_ActionPolylineSegment
Create Polyline from Existing &Segments
-
+
Create Polyline from Existing Segments
-
+
No Entity found.
-
+
Entity must be a line or arc.
-
+
Choose one of the segments on the original polyline
-
+
Cancel
@@ -8028,31 +8045,31 @@ Do you want to replace it?
RS_ActionPolylineTrim
&Trim segments
-
+
- Trim polyline's segments
-
+ Trim polyline's segments
+
No Entity found.
-
+
Entity must be a polyline.
-
+
Specifying point is invalid.
-
+
No Segment found on entity.
-
+
Specify polyline to trim
-
+
Cancel
@@ -8060,15 +8077,15 @@ Do you want to replace it?
Specify first segment
-
+
Back
-
+
Specify second segment
-
+
@@ -8090,7 +8107,7 @@ Do you want to replace it?
Ctrl+K
-
+
@@ -8101,7 +8118,7 @@ Do you want to replace it?
Entity must be an Atomic Entity.
-
+
@@ -8116,7 +8133,7 @@ Do you want to replace it?
Choose first point of intersection line
-
+
Cancel
@@ -8124,11 +8141,11 @@ Do you want to replace it?
Choose second point of intersection line
-
+
Back
-
+
@@ -8164,7 +8181,7 @@ Do you want to replace it?
Choose first edge
-
+
Cancel
@@ -8172,11 +8189,11 @@ Do you want to replace it?
Choose second edge
-
+
Back
-
+
@@ -8187,7 +8204,7 @@ Do you want to replace it?
Set relative Zero
-
+
Cancel
@@ -8202,30 +8219,30 @@ Do you want to replace it?
Select first entity
-
+
Back
-
+
Select second entity
-
+
RS_ActionToolRegenerateDimensions
Regenerate Dimension Entities
-
+
Regenerated %1 dimension entities
-
+
No dimension entities found
-
+
@@ -8257,7 +8274,7 @@ Do you want to replace it?
RS_ActionZoomPrevious
&Previous View
-
+
@@ -8275,7 +8292,7 @@ Do you want to replace it?
Specify first edge
-
+
Cancel
@@ -8283,745 +8300,745 @@ Do you want to replace it?
Specify second edge
-
+
Back
-
+
RS_Commands
point
-
+
po
-
+
line
-
+
ln
-
+
l
-
+
polyline
-
+
offset
-
+
o
offset
-
+
parallel
-
+
par
parallel
-
+
arc
-
+
a
-
+
circle
-
+
ci
-
+
rectangle
-
+
rec
-
+
rectang
-
+
text
-
+
regen
-
+
rg
zoom - redraw
-
+
zr
zoom - redraw
-
+
zw
zoom - window
-
+
za
zoom - auto
-
+
zp
zoom - pan
-
+
zv
zoom - previous
-
+
undo
-
+
u
undo
-
+
redo
-
+
r
-
+
da
dimension - aligned
-
+
da
-
+
dh
dimension - horizontal
-
+
dh
-
+
dr
dimension - linear
-
+
dr
-
+
dv
dimension - vertical
-
+
dv
-
+
ld
dimension - leader
-
+
ld
-
+
dimregen
-
+
tm
modify - multi trim (extend)
-
+
tm
-
+
xt
modify - trim (extend)
-
+
xt
-
+
rm
modify - trim
-
+
rm
-
+
mv
modify - move
-
+
mv
-
+
ch
modify - bevel (chamfer)
-
+
ch
-
+
mi
modify - mirror
-
+
mi
-
+
ro
modify - rotate
-
+
ro
-
+
sz
modify - scale
-
+
sz
-
+
ss
modify - stretch
-
+
ss
-
+
er
modify - delete (erase)
-
+
er
-
+
oo
modify - undo (oops)
-
+
oo
-
+
uu
modify - redo
-
+
uu
-
+
xp
modify - explode
-
+
xp
-
+
os
snap - none
-
+
os
-
+
sg
snap - grid
-
+
sg
-
+
se
snap - end
-
+
se
-
+
si
snap - intersection
-
+
si
-
+
sn
snap - center
-
+
sn
-
+
sm
snap - middle
-
+
sm
-
+
sn
snap - nearest
-
+
np
snap - nearest point
-
+
np
-
+
tn
Deselect all
-
+
tn
-
+
Command: %1
-
+
po
point
-
+
li
line
-
+
pa
parallel
-
+
re
rectangle
-
+
rp
regular polygon
-
+
ci
circle
-
+
c2
2 point circle
-
+
c3
3 point circle
-
+
ar
arc
-
+
a3
3 point arc
-
+
ep
ellipse
-
+
tx
text
-
+
mt
text
-
+
rd
redraw
-
+
zi
zoom - in
-
+
zo
zoom - out
-
+
fr*
layers - freeze all
-
+
th*
layers - defreeze all
-
+
ex
modify - explode
-
+
angle
-
+
close
-
+
chord length
-
+
columns
-
+
columnspacing
-
+
factor
-
+
length
-
+
length1
-
+
length2
-
+
number
-
+
radius
-
+
rows
-
+
rowspacing
-
+
through
-
+
trim
-
+
ang
angle
-
+
a
angle
-
+
center
-
+
cen
center
-
+
c
center
-
+
length
chord length
-
+
l
chord length
-
+
c
close
-
+
cols
columns
-
+
c
columns
-
+
columnspacing
columnspacing for inserts
-
+
colspacing
columnspacing for inserts
-
+
cs
columnspacing for inserts
-
+
fact
factor
-
+
f
factor
-
+
help
-
+
?
help
-
+
length
length
-
+
len
length
-
+
l
length
-
+
length1
length1
-
+
len1
length1
-
+
l1
length1
-
+
length2
length2
-
+
len2
length2
-
+
l2
length2
-
+
num
number
-
+
n
number
-
+
r
radius
-
+
reversed
reversed arc
-
+
rev
reversed arc
-
+
r
reversed arc
-
+
r
rows
-
+
rowspacing
rowspacing for inserts
-
+
rs
rowspacing for inserts
-
+
t
text
-
+
t
through
-
+
Available commands:
-
+
kill
-
+
k
-
+
back
-
+
b
back
-
+
diff --git a/ts/librecad_zh_cn.ts b/ts/librecad_zh_cn.ts
index aa7415b7bb..3e3c553427 100644
--- a/ts/librecad_zh_cn.ts
+++ b/ts/librecad_zh_cn.ts
@@ -1,230 +1,236 @@
+
QC_ApplicationWindow
-
+
&Plugins
插件(&P)
-
- Running script '%1'
- 运行脚本 '%1'
+
+ Running script '%1'
+ 运行脚本 '%1'
-
- Inserting block '%1'
- 插入图块 '%1'
+
+ Inserting block '%1'
+ 插入图块 '%1'
-
+
&File
文件(&F)
-
+
Import
导入
-
+
&Edit
编辑(&E)
-
+
&View
视图(&V)
-
+
+ &Toolbars
+
+
+
+
Focus on &Command Line
聚焦命令行(&C)
-
+
CTRL+M
CTRL+M
-
+
&Select
选择(&S)
-
+
&Draw
绘图(&D)
-
+
&Point
点(&P)
-
+
&Line
直线(&L)
-
+
&Arc
圆弧(&A)
-
+
&Circle
圆(&C)
-
+
&Ellipse
椭圆(&E)
-
+
&Spline
样条曲线(&S)
-
+
&Polyline
多段线(&P)
-
-
+
+
&Dimension
标注(&D)
-
+
&Modify
修改(&M)
-
+
&Snap
捕捉(&S)
-
+
&Info
查询(&I)
-
+
&Layer
图层(&L)
-
+
&Block
图块(&B)
-
+
&Scripts
脚本(&S)
-
+
&CAM
&CAM
-
+
About
关于
-
+
&Manual
手册(&M)
-
+
Insert Image
插入图像
-
+
&Window
窗口(&W)
-
+
&Help
帮助(&H)
-
+
De&bugging
调试(&b)
-
+
Layer List
图层列表
-
+
Block List
图块列表
-
+
Library Browser
库浏览器
-
+
Command line
命令行
-
+
&Cascade
层叠(&C)
-
+
&Tile
平铺(&T)
-
+
Tile &Horizontally
水平平铺(&H)
-
+
Creating new file...
新建文件...
-
- Block '%1'
- 图块 '%1'
+
+ Block '%1'
+ 图块 '%1'
-
+
unnamed document %1
未命名文档 %1
-
+
New Drawing created.
新图纸已创建.
-
+
Opening recent file...
最近打开文件...
-
+
Cannot open the file
%1
Please check the permissions.
@@ -233,29 +239,29 @@ Please check the permissions.
请检查权限.
-
+
Loaded document:
已加载文档:
-
+
Opening aborted
打开中止
-
+
Saving drawing...
保存图纸...
-
-
+
+
Saved drawing: %1
已保存图纸: %1
-
-
+
+
Cannot save the file
%1
Please check the permissions.
@@ -264,22 +270,22 @@ Please check the permissions.
请检查权限.
-
+
Saving drawing under new filename...
使用新文件名保存图纸...
-
+
Auto-saving drawing...
自动保存图纸...
-
+
Auto-saved drawing
自动保存的图纸
-
+
Cannot auto-save the file
%1
Please check the permissions.
@@ -290,88 +296,107 @@ Auto-save disabled.
自动保存已禁用.
-
+
Exporting drawing...
导出图纸...
-
+
Exported: %1
导出: %1
-
+
Exporting...
导出...
-
+
Export complete
导出所有
-
+
Export failed!
导出失败!
-
+
Printing...
打印...
-
+
Printing complete
打印所有
-
+
Print preview for %1
%1 打印预览
-
+
Exiting application...
退出程序...
-
+
None
无
-
+
About...
关于...
-
+
Version: %1 %2
版本: %1 %2
-
+
SVN Revision: %1
SVN修订: %1
-
+
+ Compiled on: %1
+
+
+
+
+ Program Icons Supplied by
+
+
+
+
+ Splash and Logo supplied by
+
+
+
Date: %1
- 日期: %1
+ 日期: %1
-
+
Modules: %1
模块: %1
-
+
+ Main Website :
+
+
+
+
Help
帮助
-
- Bugger, I couldn't find the helpfiles on the filesystem.
+
+ Bugger, I couldn't find the helpfiles on the filesystem.
错误,无法自文件系统找到帮助文件.
@@ -398,123 +423,123 @@ Auto-save disabled.
QG_ActionFactory
-
+
&Export...
导出(&E)...
-
+
&Close
关闭(&C)
-
+
&Print...
打印(&P)...
-
+
&Quit
退出(&Q)
-
-
+
+
&Grid
网格(&G)
-
+
CTRL-G
CTRL-G
-
+
&Draft
草图(&D)
-
+
&Statusbar
状态栏(&S)
-
+
&back
返回(&b)
-
+
&Free
自由(&F)
-
+
&Endpoints
端点(&E)
-
+
&On Entity
在实体上(&O)
-
+
&Center
中心(&C)
-
+
&Middle
中点(&M)
-
+
&Distance from Endpoint
距端点(&D)
-
+
&Intersection
交点(&I)
-
+
Restrict &Nothing
无约束(&N)
-
+
Restrict &Orthogonally
正交约束(&O)
-
+
Restrict &Horizontally
水平约束(&H)
-
+
Restrict&Vertically
垂直约束(&V)
-
+
&Preferences
选项(&P)
-
+
&Application Preferences
应用程序选项(&A)
-
+
Open IDE
打开IDE
-
+
Run Script..
运行脚本..
@@ -617,96 +642,96 @@ Auto-save disabled.
- Could not name block. A block named "%1" already exists.
- 无法命名图块. 图块名"%1"已存在.
+ Could not name block. A block named "%1" already exists.
+ 无法命名图块. 图块名"%1"已存在.
QG_BlockWidget
-
+
Show all blocks
显示所有图块
-
+
Hide all blocks
隐藏所有图块
-
+
Add a block
添加图块
-
+
Remove the active block
移除当前图块
-
+
Rename the active block
重命名当前图块
-
+
Edit the active block
in a separate window
在独立窗口中
编辑当前图块
-
+
Insert the active block
插入当前图块
-
+
Block Menu
图块菜单
-
+
&Defreeze all Blocks
解冻所有图块(&D)
-
+
&Freeze all Blocks
冻结所有图块(&F)
-
+
&Add Block
添加图块(&A)
-
+
&Remove Block
移除图块(&R)
-
+
&Rename Block
重命名图块(&R)
-
+
&Edit Block
编辑图块(&E)
-
+
&Insert Block
插入图块(&I)
-
+
&Toggle Visibility
切换可见性(&T)
-
+
&Create New Block
新建图块(&C)
@@ -1001,13 +1026,13 @@ in a separate window
- Show menu "Lines"
- 显示"直线"菜单
+ Show menu "Lines"
+ 显示"直线"菜单
- Show menu "Arcs"
- 显示"圆弧"菜单
+ Show menu "Arcs"
+ 显示"圆弧"菜单
@@ -1021,13 +1046,13 @@ in a separate window
- Show menu "Ellipses"
- 显示"椭圆"菜单
+ Show menu "Ellipses"
+ 显示"椭圆"菜单
- Show menu "Circles"
- 显示"圆"菜单
+ Show menu "Circles"
+ 显示"圆"菜单
@@ -1036,8 +1061,8 @@ in a separate window
- Show menu "Dimensions"
- 显示"标注"菜单
+ Show menu "Dimensions"
+ 显示"标注"菜单
@@ -1051,13 +1076,13 @@ in a separate window
- Show menu "Edit"
- 显示"编辑"菜单
+ Show menu "Edit"
+ 显示"编辑"菜单
- Show menu "Measure"
- 显示"测量"菜单
+ Show menu "Measure"
+ 显示"测量"菜单
@@ -1066,8 +1091,8 @@ in a separate window
- Show menu "Select"
- 显示"选择"菜单
+ Show menu "Select"
+ 显示"选择"菜单
@@ -2011,12 +2036,12 @@ in a separate window
- <font size="+1"><b>Welcome to QCad</b>
+ <font size="+1"><b>Welcome to QCad</b>
</font>
<br>
Please choose the unit you want to use for new drawings and your preferred language.<br>
You can changes these settings later in the Options Dialog of QCad.
- <font size="+1"><b>欢迎使用QCad</b>
+ <font size="+1"><b>欢迎使用QCad</b>
</font>
<br>
请选择新图纸的绘图单位及环境语言.<br>
@@ -2680,7 +2705,7 @@ You can changes these settings later in the Options Dialog of QCad.
- Surveyor's units
+ Surveyor's units
勘测单位
@@ -2690,8 +2715,8 @@ You can changes these settings later in the Options Dialog of QCad.
- For the length formats 'Engineering' and 'Architectural', the unit must be set to Inch.
- 在'工程'和'建筑'长度格式下,单位需设为英寸.
+ For the length formats 'Engineering' and 'Architectural', the unit must be set to Inch.
+ 在'工程'和'建筑'长度格式下,单位需设为英寸.
@@ -5292,10 +5317,10 @@ You can changes these settings later in the Options Dialog of QCad.
QMessageBox
-
-
-
-
+
+
+
+
Warning
警告
@@ -5307,8 +5332,8 @@ You can changes these settings later in the Options Dialog of QCad.
- Layer with a name "%1" already exists. Please specify a different name.
- 图层"%1"已存在. 请另选名称.
+ Layer with a name "%1" already exists. Please specify a different name.
+ 图层"%1"已存在. 请另选名称.
@@ -5318,13 +5343,13 @@ You can changes these settings later in the Options Dialog of QCad.
- Layer "%1" and all entities on it will be removed.
- 图层"%1"及其上所有实体将被删除.
+ Layer "%1" and all entities on it will be removed.
+ 图层"%1"及其上所有实体将被删除.
- Layer "%1" can never be removed.
- 图层"%1"无法删除.
+ Layer "%1" can never be removed.
+ 图层"%1"无法删除.
@@ -5338,8 +5363,8 @@ You can changes these settings later in the Options Dialog of QCad.
- Block "%1" and all its entities will be removed.
- 图块"%1"及其所有实体将被删除.
+ Block "%1" and all its entities will be removed.
+ 图块"%1"及其所有实体将被删除.
@@ -5470,17 +5495,21 @@ You can changes these settings later in the Options Dialog of QCad.
秒差距
-
+
Loading..
加载..
-
+
+ Loading...
+
+
+
Loading Library Paths..
- 库加载路径..
+ 库加载路径..
-
+
Loading File %1..
加载文件 %1..
@@ -5550,35 +5579,35 @@ You can changes these settings later in the Options Dialog of QCad.
X像素图
-
-
+
+
Save Drawing As
图纸另存为
-
+
%1 already exists.
Do you want to replace it?
%1已存在.
确定要覆盖吗?
-
+
Drawing Exchange %1
图形交换 %1
-
+
QCad 1.x file %1
QCad 1.x 文件 %1
-
+
Font %1
字体 %1
-
+
Open Drawing
打开图纸
@@ -6965,22 +6994,22 @@ Do you want to replace it?
RS_ActionEditCopy
-
+
&Copy
复制(&C)
-
+
Cu&t
剪切(&t)
-
+
Specify reference point
指定参照点
-
+
Cancel
取消
@@ -6988,17 +7017,17 @@ Do you want to replace it?
RS_ActionEditPaste
-
+
&Paste
粘贴(&P)
-
+
Set reference point
设置参照点
-
+
Cancel
取消
@@ -7006,12 +7035,12 @@ Do you want to replace it?
RS_ActionEditUndo
-
+
&Undo
撤消(&U)
-
+
&Redo
重做(&R)
@@ -7019,7 +7048,7 @@ Do you want to replace it?
RS_ActionFileNew
-
+
&New...
新建(&N)...
@@ -7027,7 +7056,7 @@ Do you want to replace it?
RS_ActionFileOpen
-
+
&Open...
打开(&O)...
@@ -7035,7 +7064,7 @@ Do you want to replace it?
RS_ActionFileSave
-
+
&Save
保存(&S)
@@ -7043,7 +7072,7 @@ Do you want to replace it?
RS_ActionFileSaveAs
-
+
Save &as...
另存为(&a)...
@@ -7304,8 +7333,8 @@ Do you want to replace it?
- Cannot open file '%1'
- 无法打开文件 '%1'
+ Cannot open file '%1'
+ 无法打开文件 '%1'
@@ -7893,7 +7922,7 @@ Do you want to replace it?
- Add polyline's node
+ Add polyline's node
添加多段线节点
@@ -7929,7 +7958,7 @@ Do you want to replace it?
- Specify adding node's point
+ Specify adding node's point
指定添加节点点位
@@ -7947,7 +7976,7 @@ Do you want to replace it?
- Append polyline's node
+ Append polyline's node
追加多段线节点
@@ -8001,7 +8030,7 @@ Do you want to replace it?
- Delete polyline's node
+ Delete polyline's node
删除多段线节点
@@ -8037,7 +8066,7 @@ Do you want to replace it?
- Specify deleting node's point
+ Specify deleting node's point
指定删除节点点位
@@ -8188,7 +8217,7 @@ Do you want to replace it?
- Trim polyline's segments
+ Trim polyline's segments
修剪多段线分段
@@ -8245,7 +8274,7 @@ Do you want to replace it?
RS_ActionPrintPreview
-
+
Print Pre&view
打印预览(&v)
@@ -8434,7 +8463,7 @@ Do you want to replace it?
RS_ActionZoomAuto
-
+
&Auto Zoom
自动缩放(&A)
@@ -8442,12 +8471,12 @@ Do you want to replace it?
RS_ActionZoomIn
-
+
Zoom &In
放大(&I)
-
+
Zoom &Out
缩小(&O)
@@ -8455,7 +8484,7 @@ Do you want to replace it?
RS_ActionZoomPan
-
+
&Pan Zoom
拖拉缩放(&P)
@@ -8463,7 +8492,7 @@ Do you want to replace it?
RS_ActionZoomPrevious
-
+
&Previous View
前一视图(&P)
@@ -8471,7 +8500,7 @@ Do you want to replace it?
RS_ActionZoomRedraw
-
+
&Redraw
重画(&R)
@@ -8479,27 +8508,27 @@ Do you want to replace it?
RS_ActionZoomWindow
-
+
&Window Zoom
窗口缩放(&W)
-
+
Specify first edge
指定第一条边
-
+
Cancel
取消
-
+
Specify second edge
指定第二条边
-
+
Back
返回
diff --git a/ts/librecad_zh_tw.ts b/ts/librecad_zh_tw.ts
index 0377f70bf8..3c82ddc82d 100644
--- a/ts/librecad_zh_tw.ts
+++ b/ts/librecad_zh_tw.ts
@@ -1,231 +1,237 @@
+
QC_ApplicationWindow
-
+
&Plugins
外掛程式(&P)
-
+
-
- Running script '%1'
- 執行腳本 '%1'
+
+ Running script '%1'
+ 執行腳本 '%1'
-
- Inserting block '%1'
- 插入圖塊 '%1'
+
+ Inserting block '%1'
+ 插入圖塊 '%1'
-
+
&File
檔案(&F)
-
+
Import
匯入
-
+
&Edit
編輯(&E)
-
+
&View
檢視(&V)
-
+
+ &Toolbars
+
+
+
+
Focus on &Command Line
進入指令列(&C)
-
+
CTRL+M
CTRL+M
-
+
&Select
選取(&S)
-
+
&Draw
繪圖(&D)
-
+
&Point
點(&P)
點(&P)
-
+
&Line
線(&L)
-
+
&Arc
弧(&A)
-
+
&Circle
圓(&C)
-
+
&Ellipse
橢圓(&E)
-
+
&Spline
雲形線(&S)
-
+
&Polyline
聚合線(&P)
-
-
+
+
&Dimension
標註(&D)
-
+
&Modify
修改(&M)
-
+
&Snap
貼齊(&S)
-
+
&Info
資訊(&I)
-
+
&Layer
圖層(&L)
-
+
&Block
圖塊(&B)
-
+
&Scripts
腳本(&S)
-
+
&CAM
&CAM
-
+
About
關於
-
+
&Manual
手冊(&M)
-
+
Insert Image
插入影像
-
+
&Window
視窗(&W)
-
+
&Help
說明(&H)
-
+
De&bugging
除錯(&B)
-
+
Layer List
圖層清單
-
+
Block List
圖塊清單
-
+
Library Browser
資料庫瀏覽器
-
+
Command line
指令列
-
+
&Cascade
重疊顯示(&C)
-
+
&Tile
並排(&T)
-
+
Tile &Horizontally
水平並排(&H)
-
+
Creating new file...
新建圖檔...
-
- Block '%1'
- 圖塊 '%1'
+
+ Block '%1'
+ 圖塊 '%1'
-
+
unnamed document %1
未命名文件 %1
-
+
New Drawing created.
新繪圖已建立。
-
+
Opening recent file...
開啟最近的檔案...
-
+
Cannot open the file
%1
Please check the permissions.
@@ -234,29 +240,29 @@ Please check the permissions.
請檢查檔案權限。
-
+
Loaded document:
載入的文件:
-
+
Opening aborted
已中止開啟
-
+
Saving drawing...
繪圖儲存中...
-
-
+
+
Saved drawing: %1
已儲存繪圖: %1
-
-
+
+
Cannot save the file
%1
Please check the permissions.
@@ -265,22 +271,22 @@ Please check the permissions.
請檢查檔案權限。
-
+
Saving drawing under new filename...
以新檔名儲存繪圖...
-
+
Auto-saving drawing...
繪圖自動儲存中...
-
+
Auto-saved drawing
繪圖已自動儲存
-
+
Cannot auto-save the file
%1
Please check the permissions.
@@ -291,88 +297,107 @@ Auto-save disabled.
無法自動儲存。
-
+
Exporting drawing...
正在匯出繪圖...
-
+
Exported: %1
已匯出: %1
-
+
Exporting...
匯出...
-
+
Export complete
匯出完成
-
+
Export failed!
匯出失敗!
-
+
Printing...
列印...
-
+
Printing complete
列印完成
-
+
Print preview for %1
預覽列印 %1
-
+
Exiting application...
退出程式...
-
+
None
無
-
+
About...
關於...
-
+
Version: %1 %2
版本: %1 %2
-
+
SVN Revision: %1
SVN 修訂: %1
-
+
+ Compiled on: %1
+
+
+
+
+ Program Icons Supplied by
+
+
+
+
+ Splash and Logo supplied by
+
+
+
Date: %1
- 日期: %1
+ 日期: %1
-
+
Modules: %1
模組: %1
-
+
+ Main Website :
+
+
+
+
Help
求助
-
- Bugger, I couldn't find the helpfiles on the filesystem.
+
+ Bugger, I couldn't find the helpfiles on the filesystem.
報錯,我在檔案系統上無法找到說明文件。
@@ -399,123 +424,123 @@ Auto-save disabled.
QG_ActionFactory
-
+
&Export...
匯出(&E)...
-
+
&Close
關閉(&C)
-
+
&Print...
列印(&P)...
-
+
&Quit
&離開
-
-
+
+
&Grid
格點(&G)
-
+
CTRL-G
CTRL-G
-
+
&Draft
草圖(&D)
-
+
&Statusbar
狀態列(&S)
-
+
&back
返回(&b)
-
+
&Free
自由(&F)
-
+
&Endpoints
端點(&E)
-
+
&On Entity
物件(&O)
-
+
&Center
中心(&C)
-
+
&Middle
中點(&M)
-
+
&Distance from Endpoint
端點距離(&D)
-
+
&Intersection
交點(&I)
-
+
Restrict &Nothing
無限制(&N)
-
+
Restrict &Orthogonally
正交限制(&O)
-
+
Restrict &Horizontally
水平限制(&H)
-
+
Restrict&Vertically
垂直限制(&V)
-
+
&Preferences
偏好設定(&P)
-
+
&Application Preferences
應用程式偏好設定(&A)
-
+
Open IDE
開啟 IDE
-
+
Run Script..
執行腳本..
@@ -618,96 +643,96 @@ Auto-save disabled.
- Could not name block. A block named "%1" already exists.
- 無法命名圖塊。名為 "%1" 的圖塊已經存在。
+ Could not name block. A block named "%1" already exists.
+ 無法命名圖塊。名為 "%1" 的圖塊已經存在。
QG_BlockWidget
-
+
Show all blocks
顯示所有圖塊
-
+
Hide all blocks
隱藏所有圖塊
-
+
Add a block
新增圖塊
-
+
Remove the active block
移除作用中圖塊
-
+
Rename the active block
重新命名作用中圖塊
-
+
Edit the active block
in a separate window
在分離視窗中
編輯作用中圖塊
-
+
Insert the active block
插入作用中圖塊
-
+
Block Menu
圖塊選單
-
+
&Defreeze all Blocks
解凍所有圖塊(&D)
-
+
&Freeze all Blocks
凍結所有圖塊(&F)
-
+
&Add Block
新增圖塊(&A)
-
+
&Remove Block
移除圖塊(&R)
-
+
&Rename Block
重新命名圖塊(&R)
-
+
&Edit Block
編輯圖塊(&E)
-
+
&Insert Block
插入圖塊(&I)
-
+
&Toggle Visibility
切換可見性(&T)
-
+
&Create New Block
建立新圖塊(&C)
@@ -1002,13 +1027,13 @@ in a separate window
- Show menu "Lines"
- 顯示 "線" 選單
+ Show menu "Lines"
+ 顯示 "線" 選單
- Show menu "Arcs"
- 顯示 "弧" 選單
+ Show menu "Arcs"
+ 顯示 "弧" 選單
@@ -1022,13 +1047,13 @@ in a separate window
- Show menu "Ellipses"
- 顯示 "橢圓" 選單
+ Show menu "Ellipses"
+ 顯示 "橢圓" 選單
- Show menu "Circles"
- 顯示 "圓" 選單
+ Show menu "Circles"
+ 顯示 "圓" 選單
@@ -1037,8 +1062,8 @@ in a separate window
- Show menu "Dimensions"
- 顯示 "標註" 選單
+ Show menu "Dimensions"
+ 顯示 "標註" 選單
@@ -1052,13 +1077,13 @@ in a separate window
- Show menu "Edit"
- 顯示 "編輯" 選單
+ Show menu "Edit"
+ 顯示 "編輯" 選單
- Show menu "Measure"
- 顯示 "測量" 選單
+ Show menu "Measure"
+ 顯示 "測量" 選單
@@ -1067,8 +1092,8 @@ in a separate window
- Show menu "Select"
- 顯示 "選取" 選單
+ Show menu "Select"
+ 顯示 "選取" 選單
@@ -2012,12 +2037,12 @@ in a separate window
- <font size="+1"><b>Welcome to QCad</b>
+ <font size="+1"><b>Welcome to QCad</b>
</font>
<br>
Please choose the unit you want to use for new drawings and your preferred language.<br>
You can changes these settings later in the Options Dialog of QCad.
- <font size="+1"><b>歡迎使用 QCad</b>
+ <font size="+1"><b>歡迎使用 QCad</b>
</font>
<br>
請選擇您想用於新圖畫的單位和優先使用的語言。<br>
@@ -2681,7 +2706,7 @@ You can changes these settings later in the Options Dialog of QCad.
- Surveyor's units
+ Surveyor's units
測量單位
@@ -2691,7 +2716,7 @@ You can changes these settings later in the Options Dialog of QCad.
- For the length formats 'Engineering' and 'Architectural', the unit must be set to Inch.
+ For the length formats 'Engineering' and 'Architectural', the unit must be set to Inch.
若長度格式為「工程」和「建築」,此單位必須設為英吋。
@@ -5293,10 +5318,10 @@ You can changes these settings later in the Options Dialog of QCad.
QMessageBox
-
-
-
-
+
+
+
+
Warning
警告
@@ -5308,8 +5333,8 @@ You can changes these settings later in the Options Dialog of QCad.
- Layer with a name "%1" already exists. Please specify a different name.
- 相同名稱 "%1" 的圖層已經存在。請指定不同的名稱。
+ Layer with a name "%1" already exists. Please specify a different name.
+ 相同名稱 "%1" 的圖層已經存在。請指定不同的名稱。
@@ -5319,13 +5344,13 @@ You can changes these settings later in the Options Dialog of QCad.
- Layer "%1" and all entities on it will be removed.
- 圖層"%1"與其所有物件將被移除。
+ Layer "%1" and all entities on it will be removed.
+ 圖層"%1"與其所有物件將被移除。
- Layer "%1" can never be removed.
- 無法刪除圖層"%1"。
+ Layer "%1" can never be removed.
+ 無法刪除圖層"%1"。
@@ -5339,8 +5364,8 @@ You can changes these settings later in the Options Dialog of QCad.
- Block "%1" and all its entities will be removed.
- 圖塊"%1"與其所有物件將被移除。
+ Block "%1" and all its entities will be removed.
+ 圖塊"%1"與其所有物件將被移除。
@@ -5471,17 +5496,21 @@ You can changes these settings later in the Options Dialog of QCad.
秒差距
-
+
Loading..
正在載入..
-
+
+ Loading...
+
+
+
Loading Library Paths..
- 載入資料庫路徑..
+ 載入資料庫路徑..
-
+
Loading File %1..
正在載入檔案 %1..
@@ -5551,35 +5580,35 @@ You can changes these settings later in the Options Dialog of QCad.
X像素圖
-
-
+
+
Save Drawing As
另存圖形為
-
+
%1 already exists.
Do you want to replace it?
%1 已經存在。
您確定要取代它嗎?
-
+
Drawing Exchange %1
圖形交換%1
-
+
QCad 1.x file %1
QCad 1.x 檔案 %1
-
+
Font %1
字型 %1
-
+
Open Drawing
開啟繪圖
@@ -6966,22 +6995,22 @@ Do you want to replace it?
RS_ActionEditCopy
-
+
&Copy
複製(&C)
-
+
Cu&t
剪下(&T)
-
+
Specify reference point
指定參考點
-
+
Cancel
取消
@@ -6989,17 +7018,17 @@ Do you want to replace it?
RS_ActionEditPaste
-
+
&Paste
貼上(&P)
-
+
Set reference point
設定參考點
-
+
Cancel
取消
@@ -7007,12 +7036,12 @@ Do you want to replace it?
RS_ActionEditUndo
-
+
&Undo
復原(&U)
-
+
&Redo
重做(&R)
@@ -7020,7 +7049,7 @@ Do you want to replace it?
RS_ActionFileNew
-
+
&New...
新建(&N)...
@@ -7028,7 +7057,7 @@ Do you want to replace it?
RS_ActionFileOpen
-
+
&Open...
開啟(&O)...
@@ -7036,7 +7065,7 @@ Do you want to replace it?
RS_ActionFileSave
-
+
&Save
儲存(&S)
@@ -7044,7 +7073,7 @@ Do you want to replace it?
RS_ActionFileSaveAs
-
+
Save &as...
另存新檔(&A)...
@@ -7305,8 +7334,8 @@ Do you want to replace it?
- Cannot open file '%1'
- 無法開啟檔案 '%1'
+ Cannot open file '%1'
+ 無法開啟檔案 '%1'
@@ -7894,7 +7923,7 @@ Do you want to replace it?
- Add polyline's node
+ Add polyline's node
新增聚合線的節點
@@ -7930,7 +7959,7 @@ Do you want to replace it?
- Specify adding node's point
+ Specify adding node's point
指定新增節點的位罝
@@ -7948,7 +7977,7 @@ Do you want to replace it?
- Append polyline's node
+ Append polyline's node
添加聚合線的節點
@@ -8002,7 +8031,7 @@ Do you want to replace it?
- Delete polyline's node
+ Delete polyline's node
刪除聚合線的節點
@@ -8038,7 +8067,7 @@ Do you want to replace it?
- Specify deleting node's point
+ Specify deleting node's point
指定刪除節點位置
@@ -8189,7 +8218,7 @@ Do you want to replace it?
- Trim polyline's segments
+ Trim polyline's segments
修剪聚合線的線段
@@ -8246,7 +8275,7 @@ Do you want to replace it?
RS_ActionPrintPreview
-
+
Print Pre&view
預覽列印(&V)
@@ -8337,7 +8366,7 @@ Do you want to replace it?
Select Entity
選取物件
-
+
RS_ActionSelectWindow
@@ -8420,22 +8449,22 @@ Do you want to replace it?
Regenerate Dimension Entities
更新標註
-
+
Regenerated %1 dimension entities
更新 %1 標註
-
+
No dimension entities found
找不到標註
-
+
RS_ActionZoomAuto
-
+
&Auto Zoom
自動縮放(&A)
@@ -8443,12 +8472,12 @@ Do you want to replace it?
RS_ActionZoomIn
-
+
Zoom &In
拉近(&I)
-
+
Zoom &Out
拉遠(&O)
@@ -8456,7 +8485,7 @@ Do you want to replace it?
RS_ActionZoomPan
-
+
&Pan Zoom
平移(&P)
@@ -8464,7 +8493,7 @@ Do you want to replace it?
RS_ActionZoomPrevious
-
+
&Previous View
上次檢視(&P)
@@ -8472,7 +8501,7 @@ Do you want to replace it?
RS_ActionZoomRedraw
-
+
&Redraw
重繪(&R)
@@ -8480,27 +8509,27 @@ Do you want to replace it?
RS_ActionZoomWindow
-
+
&Window Zoom
縮放視窗(&W)
-
+
Specify first edge
指定第一個邊
-
+
Cancel
取消
-
+
Specify second edge
指定第二個邊
-
+
Back
返回
@@ -9200,7 +9229,7 @@ Do you want to replace it?
rowspacing
列高
-
+
@@ -9282,13 +9311,13 @@ Do you want to replace it?
columnspacing
columnspacing for inserts
欄寬
-
+
colspacing
columnspacing for inserts
欄寬
-
+
cs
@@ -9419,7 +9448,7 @@ Do you want to replace it?
rowspacing
rowspacing for inserts
列高
-
+
rs