diff --git a/configs/by_interface/servotogo/README b/configs/by_interface/servotogo/README
index 23bf10694fe..45f30ef1b79 100644
--- a/configs/by_interface/servotogo/README
+++ b/configs/by_interface/servotogo/README
@@ -1,3 +1 @@
 ServoToGo
-
-www.servotogo.com
diff --git a/configs/by_interface/servotogo/README_es b/configs/by_interface/servotogo/README_es
index 23bf10694fe..45f30ef1b79 100644
--- a/configs/by_interface/servotogo/README_es
+++ b/configs/by_interface/servotogo/README_es
@@ -1,3 +1 @@
 ServoToGo
-
-www.servotogo.com
diff --git a/configs/by_interface/servotogo/stg.txt b/configs/by_interface/servotogo/stg.txt
index 783483d31d6..1f03171a377 100644
--- a/configs/by_interface/servotogo/stg.txt
+++ b/configs/by_interface/servotogo/stg.txt
@@ -1,6 +1,6 @@
 This configuration step is intended for servo machines running the ServoToGo card.
 
-Both the STG1 and STG2 are supported, check www.servotogo.com for additional details.
+Both the STG1 and STG2 are supported.
 
 You can have either a standard pinout (LinuxCNC style) or  you could make a new one which would suit your own custom cabling.
 
diff --git a/docs/src/common/emc-history.adoc b/docs/src/common/emc-history.adoc
index 9c17a5b74cf..493466ed501 100644
--- a/docs/src/common/emc-history.adoc
+++ b/docs/src/common/emc-history.adoc
@@ -33,7 +33,7 @@ was pursued with success. Next up was the issue of the expensive intelligent
 motion control boards. By this time the processing power of a PC was
 considered great enough to directly take control of the motion routines.
 A quick search of available hardware resulted in the selection of a
-http://www.servotogo.com/[Servo-To-Go] interface board as the first platform
+"Servo-To-Go" interface board as the first platform
 for letting the PC directly control the motors. Software for trajectory
 planning and PID loop control was added to the existing user interface and
 RS274 interpreter. Matt successfully used this version to upgrade a couple
diff --git a/docs/src/drivers/servo-to-go.adoc b/docs/src/drivers/servo-to-go.adoc
index 945af4fba3c..64703001874 100644
--- a/docs/src/drivers/servo-to-go.adoc
+++ b/docs/src/drivers/servo-to-go.adoc
@@ -14,8 +14,7 @@ The Servo-To-Go (STG) is one of the first PC motion control cards supported
 by LinuxCNC. It is an ISA card and it exists in different flavors (all
 supported by this driver). The board includes up to 8 channels of
 quadrature encoder input, 8 channels of analog input and output, 32
-bits digital I/O, an interval timer with interrupt and a watchdog. For more
-information see the http://www.servotogo.com/[Servo To Go] web page.
+bits digital I/O, an interval timer with interrupt and a watchdog.
 
 NOTE: We have had reports that the opamps on the Servo To Go card do
 not work with newer ATX power supplies that use modern switch