Skip to content

LizaDarrous/lhcMR

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

89 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

lhcMR

❕ The lhcMR R package is a work in progress ❕

Overview

lhcMR is an R package that performs bi-directional causal estimation between a pair of traits, while accounting for the presence of a potential heritable confounder acting on the pair. The method termed LHC-MR aims to overcome some limitations seen in standard two-sample Mendelian Randomisation (MR) methods such as potential sample overlap, under-exploitation of genome-wide markers, and sensitivity to the presence of a heritable confounder of the exposure-outcome relationship. To do so, our approach builds on the typical MR framework to incorporate the presence of latent heritable confounder in a structural equation model (SEM). Given starting points for the parameters we wish to estimate (including bidirectional causal effect, confounder effects, direct heritabilities and more), LHC-MR optimizes the likelihood function to obtain maximum likelihood estimates for the parameters. LHC-MR then runs a block jackknife approach in order to calculate the standard error of the estimated parameters.

The data munging section of lhcMR is heavily inspired by the GenomicSEM R package, and uses it as well to calculate the cross-trait LDSC and obtain individual trait intercepts. lhcMR also uses the TwoSampleMR R package for inverse-variance weighted (IVW) MR causal effect estimation.

Installation

You can install the current version of lhcMR using the following code snippet:

#install.packages("devtools")
devtools::install_github("LizaDarrous/lhcMR")
library(lhcMR)

Usage

There are several input files (in specific formats) needed to run lhcMR:

1. GWAS summary statistics files of the two traits (exposure & outcome):

These files can be regular tab/space/comma- separated files or gzipped files [.tsv.bgz /.gz]), and they should be read into R as data frames. They must contain the following columns in these possible variations of their names (not case sensitive):

  • SNP: SNP,SNPID,RS_NUMBER,RS_NUMBERS, MARKERNAME, ID,PREDICTOR,SNP_ID,RS
  • Effect-size: B,BETA,LOG_ODDS,EFFECTS,EFFECT,SIGNED_SUMSTAT,EST, BETA1, LOGOR,BETA_WF
  • Standard error: STANDARD_ERROR,STD_ERR,STDERR,SE_BETA_WF,SE_BETA
  • T-statistic: TSTAT,Z,ZSCORE,ZSTAT,ZSTATISTIC If the T-statistic column is not present, it will be automatically calculated from the Effect-size and Standard error columns as such : Effect-size/Standard error
  • P-value: P,PVALUE,PVAL,P_VALUE,P-VALUE,P.VALUE,P_VAL,GC_PVALUE,WALD_P,P_BETA_WF If the P-value column is not present, it will be automatically calculated from the Effect-size and Standard error columns as such : 2*pnorm(-abs(T-statistic))
  • Alternate (Effect) allele: A1, ALLELE1,EFFECT_ALLELE,ALT,EA
  • Reference allele: A2,ALLELE2,ALLELE0,OTHER_ALLELE,REF,NON_EFFECT_ALLELE,DEC_ALLELE,OA,NEA
  • Sample size: N,NCOMPLETESAMPLES, TOTALSAMPLESIZE, TOTALN, TOTAL_N,N_COMPLETE_SAMPLES, SAMPLESIZE,N_REG
  • Chromosome: HG18CHR,CHR, CHROM, CHROMOSOME
  • Position: BP,POS,POSITION
2. LD files paths (ld & rho):

The paths for two files should be provided first in the data merging file to select a subset of SNPs with LD information and create the data frame used in the actual analysis. These files are:

  • LDfile:

To generate our own LDscore, we first took 4,773,627 SNPs with info (imputation certainty measure) ≥ 0.99 present in the association summary files from the second round of GWAS by the Neale lab. This set was restricted to 4,650,107 common, high-quality SNPs, defined as being present in both UK10K and UK Biobank, having MAF > 1% in both data sets, non-significant (Pdiff > 0.05) allele frequency difference between UK Biobank and UK10K and residing outside the HLA region (chr6:28.5-33.5Mb). For these SNPs, LD scores and regression weights were computed based on 3,781 individuals from the UK10K study. These LDscores can be downloaded here. Users can also use the classical LD scores from the Broad Insititue.

  • Local LD pattern (Rho) for each SNP

To estimate the local LD distribution for each SNP (k), characterised by (π_k,σ^2_k), we fitted a two-component Gaussian mixture distribution to the observed local correlations (focal SNP +/− 2’500 markers with MAF≥ 0.5% in the UK10K): (1) one Gaussian component corresponding to zero correlations, reflecting only measurement noise (whose variance is proportional to the inverse of the reference panel size) and (2) a second component with zero mean and a larger variance than the first component (encompassing measurement noise plus non-zero LD). These local LDscores can be downloaded here.

3. Input files for LDSC (ld & hm3):

These are needed by the GenomicSEM R-package to run the GenomicSEM::ldsc function. Their description is quoted from the manual:

  • hm3:

The name of the reference file. Here we use Hapmap 3 SNPs. This file can be obtained from https://utexas.box.com/s/vkd36n197m8klbaio3yzoxsee6sxo11v.

  • ld:

A folder of LD scores used as the independent variable in LDSC (ld) and LDSC weights (wld). These are typically the same folder, and in the original LD score package is called "eur_w_ld_chr". We use the same LD scores and weights for our application, though the user can supply their own if desired. Weights for the european population used here can be obtained by downloading the eur_w_ld_chr folder in the link below (Note that these are the same weights provided by the original developers of LDSC): https://utexas.box.com/s/vkd36n197m8klbaio3yzoxsee6sxo11v


There are 3 main functions in lhcMR:

  • merge_sumstats()
    reads in summary statistics of two traits as well as file paths of LD scores and merges the data into a single data frame to be used as input for later functions. During the merge, this function harmonises the SNPs and filters out any that fall in the HLA region.
  • calculate_SP() uses the previously generated data frame to smartly generate starting points (SP) that will be used for the parameter estimation in the pair trait analysis done in the next step.
  • lhc_mr() main function that uses the input data frame and the stating points to optimize the likelihood function and estimate the parameters (most notably the bidirectional causal effect, confounder effect and total trait heritability), as well as their standard error (SE) using block jackknife.

On overview of the usage of each is provided in the manual, and their description and input parameters are detailed in the steps below:
Note1: we advise to run the analysis on a master node instead of a worker node, especially if you choose to run the parallelisation using the lapply option in Step 3 in order to have access to cores.
Note2: if running the analysis on a worker node with large summary statistics files (such as UKBiobank), it's best to allocate at least 15GB of memory.

Step 1: Reading in and merging Data using merge_sumstats():

merge_sumstats() takes in a input.files list containing the two summary statistics files with all their required columns detailed above, a vector trait.names containing two strings corresponding to the trait names in the order they were placed in the list. As well as the paths for the LDscore files mentioned above in LD.filepath and rho.filepath. This function first checks for the presence of the needed columns in all files, then joins the different files based on chromosome and position, checks for swapped alleles and corrects their effects and finally returns a large dataframe with all the columns needed to be used in all the subsequent steps.

Step 2: Calculating smart starting points for the likelihood optimisation using calculate_SP():

Taking in the resulting data frame from the previous method as input.df, as well as the vector trait.names, calculate_SP() first aims to generate starting points for the iXY, axy, ayx parameters, which are the cross-trait intercept and the bidirectional causal effect between the exposure X and the outcome Y. If run_ldsc=TRUE, then iXY will be calculated using the GenomicSEM::ldsc() function, where the input paths hm3 and ld are needed, otherwise a random value will be generated instead. Similarly, if run_MR=TRUE, then both axy and ayx will be calculated from IVW-MR using TwoSampleMR::mr(), otherwise random values will be generated.

After obtaining these values to use as starting points for their parameter estimation, others can be obtained from a random distribution or from a single trait analysis. Parameters like the confounding effect tX, tY and direct trait heritabilities h2X, h2Y are obtained randomly. Whereas parameters such as the trait intercepts or SNP polygenicity are obtained from the single trait analysis where LHC-MR is run as a simplified model given only the SNP effects of a single trait, without any input from a second trait or a confounder.

To speed up the single trait (or pair-trait analysis in step 3), the data input is reduced by every n-th SNP using the SNP_filter parameter (default=10). The number of random starting points sets for the single trait analysis should be set using the SP_single parameter, we advise a value between 3-5.
nStep is the parameter used to indicate how many steps should the LHC-MR analysis take. Values can be either nStep=1, where the analysis is done such that all 9 parameters are estimated in the second step simultaneously and only iX,iY are fixed, or nStep=2 where 7 parameters are estimated and piX,piY are fixed in addition to iX,iY from the single-trait analysis.

SP_pair indicates how many sets of starting points should be generated from all these parameters (generated with small noise added or randomly). If nStep=1, we advise to have more starting points 80-100, whereas if nStep=2 the value can be 50 or higher. saveRFiles=TRUE will write the results of the previous functions as .csv files in your working directory.
Note1: if you are using your own LDscore, please specify the number of SNPs used to generate the file in M.
Note2: if you do not wish to parallelise over cores, set nCores=1.

This function returns a list containing iX,iY,piX,piY to be fixed in the optimisation of the next step, as well as the n-th SNP filtered data frame input.df_filtered and the generated starting points matrix sp_mat. On top of that, the values of the IVW estimated bidirectional effect axy_MR,ayx_MR and the cross-trait intercept iXY are reported.

Step 3: Running the likelihood optimisation to estimate the parameters, followed by a block-jackknife procedure to calculate parameter-SE using lhc_mr():

lhc_mr() takes the input list from the previous functions, the vector of trait.names to run the pair trait optimisation. The parallelisation of the optimisation can be done in two ways, depending on the paral_method chosen. If paral_method="rslurm", then the Slurm workload manager will parallelise the optimisation over the sets of starting points (faster), and the partition you wish to use should be specified in partition as a string.
Otherwise if paral_method="lapply" then the parallel::mclapply function is used to split the parallelisation over the available cores. This way is error-prone due to the availablity or lack thereof of cores to be used.
nBlock indicates how many blocks should be created for the block jackknife analysis, by default this value is 200.

The results of the optimisation over the starting points, as well as the block jackknife optimisation are written as .csv files. The summary calculations of the block jackknife procedure is also reported as a .csv file, and finally the parameter estimates, their SE and p-values are printed out and reported as a .csv file.

Note1: if you are using your own LDscore, please specify the number of SNPs used to generate the file in M.
Note2: if you do not wish to parallelise over cores, set nCores=1.

Example script

library(lhcMR)

## Set up a working directory where all the analysis files will be printed
setwd("~/BWeightDM/") 

## Read in summary statistics file, here we use Neale UKBB data 
X = data.table::fread(cmd = "zcat < ~/data/20022_irnt.gwas.imputed_v3.both_sexes.tsv.bgz")
Y = data.table::fread(cmd = "zcat < ~/data/2443.gwas.imputed_v3.both_sexes.tsv.bgz")

## To make sure we have all the columns needed (including allele data), we merge with Neale-provided variants file
VAR = data.table::fread(cmd = "zcat < ~/data/variants.tsv.bgz")
VAR$chr=as.numeric(VAR$chr)
X = dplyr::inner_join(X,VAR[,c(1:6)])
Y = dplyr::inner_join(Y,VAR[,c(1:6)])

## File paths needed for the analysis
LD.filepath = "~/data/LDscores_filtered.csv" # LD scores
rho.filepath = "~/data/LD_GM2_2prm.csv" # local/SNP-specfic LD scores

ld = "~/genomicSEM/data/eur_w_ld_chr/"
hm3 = "~/genomicSEM/data/w_hm3.snplist"

rm(VAR) # to free up space

## Step 1
trait.names=c("BWeight","DM")
input.files = list(X,Y)
df = merge_sumstats(input.files,trait.names,LD.filepath,rho.filepath)

## Step 2
SP_list = calculate_SP(df,trait.names,run_ldsc=TRUE,run_MR=TRUE,hm3=hm3,ld=ld,nStep = 2,
                       SP_single=3,SP_pair=50,SNP_filter=10)

## Step 3
res = lhc_mr(SP_list, trait.names, paral_method="rslurm", nBlock=200)

Citation

You can find our manuscript here, and you can read our pre-print here.

Contact

Liza Darrous liza.darrous@unil.ch

Releases

No releases published

Packages

No packages published

Languages