diff --git a/docs/build/xcode-version.md b/docs/build/xcode-version.md index 0694e1fc35d..7cfaaf0c400 100644 --- a/docs/build/xcode-version.md +++ b/docs/build/xcode-version.md @@ -84,9 +84,10 @@ With the advent of browser build, this is no longer worth maintaining. If you do ### Compatible Versions -* Before the release of iOS 26, the version of iOS was 18.6.2 and could be built with Xcode 16.4 and macOS 15.6.1 -* To build on an iOS 26 device, you must use Xcode 26 with macOS 15.6 or newer -* As an alternative, use [Build with Browser](../browser/bb-overview.md){: target="_blank" }, which supports iOS 15, 16, 17 and 18. +* Before the release of iOS 26, the version of iOS was 18.x and could be built with Xcode 16.4 and macOS 15.3 +* To build to an iOS 26 phone, you can continue to use Xcode 16.4 + * Xcode 26.1.1, which requires macOS 15.6.1 or higher also works +* As an alternative, use [Build with Browser](../browser/bb-overview.md){: target="_blank" }. ### Wikipedia Chart for Apple Versions diff --git a/docs/version/development.md b/docs/version/development.md index d2371057f67..54337f6b60e 100644 --- a/docs/version/development.md +++ b/docs/version/development.md @@ -16,15 +16,22 @@ This section provides an overview of changes to `dev` compared to `Loop 3.8.x`. Please check the [development channel in zulipchat](https://loop.zulipchat.com/#narrow/channel/144182-development) for notifications when an update to the `dev` branch is expected so you will be prepared. Do this **before** you install a `dev` build from TestFlight. -There are no differences between `dev` and `main` at this time. However, there are some feature branches. +With the `dev` branch, version 3.9.3, there are now differences between `dev` and `main`. In addition, there are some feature branches. + +**Note that the feature branches will be updated with the 3.9.3 updates soon after the PR to update `dev` is merged, but it takes some time. LoopDocs will be updated again when those updates happen.** + +!!! tip "Medtrum and Dana users" + You have not been forgotten. + + There is active work fixing the issues for both these pump managers with Loop. Please be patient. Updates are coming soon. |
branch | version # | comments | |:--|:--|:--| | main | 3.8.2 | release | -| dev | 3.9.2 | identical to main except version number | -| [feat/pod-keep-alive](#feature-branch-pod-keep-alive-feature) | 3.9.3 | - identical to 3.8.2 & 3.9.2 except uses the OmniBLE pod-keep-alive branch to support users of iPhone 16 phones with InPlay BLE (-Atlas) DASH pods
- should have maintained the 3.9.2 version number
- SHA for OmniBLE is `8c47404` | +| dev | 3.9.3 | Adds Live Activity, Browser Build improvement, translation and other updates
See [v3.9.3 `dev`](#v393-dev) | +| [feat/pod-keep-alive](#feature-branch-pod-keep-alive-feature) | 3.9.3 | **will be updated soon**
- identical to 3.8.2 & 3.9.2 except uses the OmniBLE pod-keep-alive branch to support users of iPhone 16 phones with InPlay BLE (-Atlas) DASH pods
- should have maintained the 3.9.2 version number
- SHA for OmniBLE is `8c47404`| | release/3.8.1 | 3.8.1 | - copy of the main release at version 3.8.1 that included Dana support
- this branch is meant to support people already using Dana with v3.8.1 who understand how to manage the issues with that version
- SHA for DanaKit is `3e606b8` | -| [feat/dev-dana-medtrum](#feature-branch-medtrum-and-dana-support) | 3.9.1 | - identical to dev when it was at 3.9.1, with addition of experimental support for Dana and Medtrum pumps
- this branch will be updated as updates are available for DanaKit and MedtrumKit
- this branch has newer version of the Dana pump manager than release/3.8.1 but new bolus recording issues were observed with this update
- when an updated version of dev is merged into this branch, the version number will be similarly incremented
- SHA for DanaKit is `0875c1e`
- SHA for MedtrumKit is `a85496e` | +| [feat/dev-dana-medtrum](#feature-branch-medtrum-and-dana-support) | 3.9.1 | **will be updated soon**
- identical to dev when it was at 3.9.1, with addition of experimental support for Dana and Medtrum pumps
- this branch will be updated as updates are available for DanaKit and MedtrumKit
- this branch has newer version of the Dana pump manager than release/3.8.1 but new bolus recording issues were observed with this update
- when an updated version of dev is merged into this branch, the version number will be similarly incremented
- SHA for DanaKit is `0875c1e`
- SHA for MedtrumKit is `a85496e` | !!! question "What is SHA?" SHA-1 means Secure Hash Algorithm 1. This is used to generate an alphanumeric code to identify which version of a repository is used. @@ -48,6 +55,36 @@ Moving forward, the version number in the feature branch will match the `dev` br > The version number for the `feat/pod-keep-alive` does not match the planned pattern for numbering feature branches; it should have been left at 3.9.2. +### v3.9.3 `dev` + +The details of the additions to the `dev` branch for v3.9.3 are found in Pull Request 358: + +* [Update dev to 3.9.3](https://github.com/LoopKit/LoopWorkspace/pull/358) + +!!! important "New Minimum Requirements" + **The minimum iOS required to build this version is iOS 16; but not all features are supported by iOS 16 - specifically the Live Activity / Dynamic Island / CarPlay features** + + **Live Activity, Dynamic Island and CarPlay** + + * The dynamic island is only available for iPhone versions 14 pro and newer; but Live Activity on the Lock Screen still works for older phone versions that support iOS 16 + * iOS 18 and watchOS 10 or newer are required for Live Activity to appear in the Smart Stack on the Apple Watch + * iOS 26 or newer is required to have Live Activity appear in the CarPlay view + +#### Live Activities + +This update adds Live Activity to Loop with [Loop PR 2919](https://github.com/LoopKit/Loop/pull/2191#issuecomment-3565473537). Many people have been using this as a customization. If you used the customization - you need to stop selecting `live_activity` as a customization or your build will fail. + +* The configuration for the Live Activity widget on the lock screen is found under Loop, Settings, Notifications, Live Activity +* You must also enable Live Activity under iPhone settings, Loop, tap on Live Activites and enable Allow Live Activites and More Frequent Update + +#### Mac-Xcode Builders + +One change with this PR is to modify the Build Order selected in Xcode from the deprecated `Manual Order` to the preferred `Dependency Order`. + +* If you start with a fresh download - this will not affect you +* If you update an existing clone on your computer with the `git pull --recurse` command, you will need to perform a `Product: Clean Build Folder` in Xcode, close the workspace in Xcode and reopen it + * If there are still build errors, then quit out of Xcode, issue the following command and try again + * `rm -rf ~/Library/Developer/Xcode/DerivedData` ### Feature Branch: Pod Keep Alive Feature @@ -58,6 +95,8 @@ For more information about using the `feat/pod-keep-alive` branch with an iPhone ### Feature Branch: Medtrum and Dana Support +**Updates are coming soon - if you have not built this, please wait for the updates currently being tested** + !!! danger "Do Not Use in Closed Loop" Users report that after a bolus finishes in Loop, the record of the bolus is removed from the event history. diff --git a/docs/version/releases.md b/docs/version/releases.md index 1c50508ef28..46df8520f43 100644 --- a/docs/version/releases.md +++ b/docs/version/releases.md @@ -10,9 +10,11 @@ For information about version 2 releases and compatibility between version 2 and The current released version for the *Loop* app is v3.8.2 and is built from the `main` branch of LoopWorkspace. The dates and contents for releases are summarized below in reverse chronological order (so newest release information comes first). -> When main was updated to v3.8.2, the same update was made to the`dev` branch. At this time, the `dev` branch is identical to `main` with the exception of the version number, which is at 3.9.2. +> The released version is the `main` branch, v3.8.2. -When there are updates to `dev`, differences between `main` and `dev` will be summarized in [Updates in `dev`](development.md#updates-in-dev){: target="_blank" }. +> The `dev` branch, now at v3.9.3, is where development happens between released. + +> * The differences between `main` and `dev` are summarized in [Updates in `dev`](development.md#updates-in-dev){: target="_blank" } along with details about some feature branches. ### What Version Do I Have? @@ -72,8 +74,6 @@ This version updates a few iOS 26 interface issues, moves support for Dana pumps * [Remove DanaKit](#why-was-danakit-support-changed) support from `main` and `dev` branches of the *Loop* app * Update some translations -> When main was updated to v3.8.2, the same update was made to the`dev` branch. At this time, the `dev` branch is identical to `main` with the exception of the version number, which is at 3.9.2. - #### Why was DanaKit Support Changed > **A pump manager that works for Trio must be separately tested for Loop**