Skip to content

HTTPS clone URL

Subversion checkout URL

You can clone with HTTPS or Subversion.

Download ZIP
tree: b1dc50aefb
Fetching contributors…

Cannot retrieve contributors at this time

385 lines (360 sloc) 12.402 kb
/*
* jddctmgr.c
*
* Copyright (C) 1994-1996, Thomas G. Lane.
* Modified 2002-2010 by Guido Vollbeding.
* This file is part of the Independent JPEG Group's software.
* For conditions of distribution and use, see the accompanying README file.
*
* This file contains the inverse-DCT management logic.
* This code selects a particular IDCT implementation to be used,
* and it performs related housekeeping chores. No code in this file
* is executed per IDCT step, only during output pass setup.
*
* Note that the IDCT routines are responsible for performing coefficient
* dequantization as well as the IDCT proper. This module sets up the
* dequantization multiplier table needed by the IDCT routine.
*/
#define JPEG_INTERNALS
#include "jinclude.h"
#include "jpeglib.h"
#include "jdct.h" /* Private declarations for DCT subsystem */
/*
* The decompressor input side (jdinput.c) saves away the appropriate
* quantization table for each component at the start of the first scan
* involving that component. (This is necessary in order to correctly
* decode files that reuse Q-table slots.)
* When we are ready to make an output pass, the saved Q-table is converted
* to a multiplier table that will actually be used by the IDCT routine.
* The multiplier table contents are IDCT-method-dependent. To support
* application changes in IDCT method between scans, we can remake the
* multiplier tables if necessary.
* In buffered-image mode, the first output pass may occur before any data
* has been seen for some components, and thus before their Q-tables have
* been saved away. To handle this case, multiplier tables are preset
* to zeroes; the result of the IDCT will be a neutral gray level.
*/
/* Private subobject for this module */
typedef struct {
struct jpeg_inverse_dct pub; /* public fields */
/* This array contains the IDCT method code that each multiplier table
* is currently set up for, or -1 if it's not yet set up.
* The actual multiplier tables are pointed to by dct_table in the
* per-component comp_info structures.
*/
int cur_method[MAX_COMPONENTS];
} my_idct_controller;
typedef my_idct_controller * my_idct_ptr;
/* Allocated multiplier tables: big enough for any supported variant */
typedef union {
ISLOW_MULT_TYPE islow_array[DCTSIZE2];
#ifdef DCT_IFAST_SUPPORTED
IFAST_MULT_TYPE ifast_array[DCTSIZE2];
#endif
#ifdef DCT_FLOAT_SUPPORTED
FLOAT_MULT_TYPE float_array[DCTSIZE2];
#endif
} multiplier_table;
/* The current scaled-IDCT routines require ISLOW-style multiplier tables,
* so be sure to compile that code if either ISLOW or SCALING is requested.
*/
#ifdef DCT_ISLOW_SUPPORTED
#define PROVIDE_ISLOW_TABLES
#else
#ifdef IDCT_SCALING_SUPPORTED
#define PROVIDE_ISLOW_TABLES
#endif
#endif
/*
* Prepare for an output pass.
* Here we select the proper IDCT routine for each component and build
* a matching multiplier table.
*/
METHODDEF(void)
start_pass (j_decompress_ptr cinfo)
{
my_idct_ptr idct = (my_idct_ptr) cinfo->idct;
int ci, i;
jpeg_component_info *compptr;
int method = 0;
inverse_DCT_method_ptr method_ptr = NULL;
JQUANT_TBL * qtbl;
for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
ci++, compptr++) {
/* Select the proper IDCT routine for this component's scaling */
switch ((compptr->DCT_h_scaled_size << 8) + compptr->DCT_v_scaled_size) {
#ifdef IDCT_SCALING_SUPPORTED
case ((1 << 8) + 1):
method_ptr = jpeg_idct_1x1;
method = JDCT_ISLOW; /* jidctint uses islow-style table */
break;
case ((2 << 8) + 2):
method_ptr = jpeg_idct_2x2;
method = JDCT_ISLOW; /* jidctint uses islow-style table */
break;
case ((3 << 8) + 3):
method_ptr = jpeg_idct_3x3;
method = JDCT_ISLOW; /* jidctint uses islow-style table */
break;
case ((4 << 8) + 4):
method_ptr = jpeg_idct_4x4;
method = JDCT_ISLOW; /* jidctint uses islow-style table */
break;
case ((5 << 8) + 5):
method_ptr = jpeg_idct_5x5;
method = JDCT_ISLOW; /* jidctint uses islow-style table */
break;
case ((6 << 8) + 6):
method_ptr = jpeg_idct_6x6;
method = JDCT_ISLOW; /* jidctint uses islow-style table */
break;
case ((7 << 8) + 7):
method_ptr = jpeg_idct_7x7;
method = JDCT_ISLOW; /* jidctint uses islow-style table */
break;
case ((9 << 8) + 9):
method_ptr = jpeg_idct_9x9;
method = JDCT_ISLOW; /* jidctint uses islow-style table */
break;
case ((10 << 8) + 10):
method_ptr = jpeg_idct_10x10;
method = JDCT_ISLOW; /* jidctint uses islow-style table */
break;
case ((11 << 8) + 11):
method_ptr = jpeg_idct_11x11;
method = JDCT_ISLOW; /* jidctint uses islow-style table */
break;
case ((12 << 8) + 12):
method_ptr = jpeg_idct_12x12;
method = JDCT_ISLOW; /* jidctint uses islow-style table */
break;
case ((13 << 8) + 13):
method_ptr = jpeg_idct_13x13;
method = JDCT_ISLOW; /* jidctint uses islow-style table */
break;
case ((14 << 8) + 14):
method_ptr = jpeg_idct_14x14;
method = JDCT_ISLOW; /* jidctint uses islow-style table */
break;
case ((15 << 8) + 15):
method_ptr = jpeg_idct_15x15;
method = JDCT_ISLOW; /* jidctint uses islow-style table */
break;
case ((16 << 8) + 16):
method_ptr = jpeg_idct_16x16;
method = JDCT_ISLOW; /* jidctint uses islow-style table */
break;
case ((16 << 8) + 8):
method_ptr = jpeg_idct_16x8;
method = JDCT_ISLOW; /* jidctint uses islow-style table */
break;
case ((14 << 8) + 7):
method_ptr = jpeg_idct_14x7;
method = JDCT_ISLOW; /* jidctint uses islow-style table */
break;
case ((12 << 8) + 6):
method_ptr = jpeg_idct_12x6;
method = JDCT_ISLOW; /* jidctint uses islow-style table */
break;
case ((10 << 8) + 5):
method_ptr = jpeg_idct_10x5;
method = JDCT_ISLOW; /* jidctint uses islow-style table */
break;
case ((8 << 8) + 4):
method_ptr = jpeg_idct_8x4;
method = JDCT_ISLOW; /* jidctint uses islow-style table */
break;
case ((6 << 8) + 3):
method_ptr = jpeg_idct_6x3;
method = JDCT_ISLOW; /* jidctint uses islow-style table */
break;
case ((4 << 8) + 2):
method_ptr = jpeg_idct_4x2;
method = JDCT_ISLOW; /* jidctint uses islow-style table */
break;
case ((2 << 8) + 1):
method_ptr = jpeg_idct_2x1;
method = JDCT_ISLOW; /* jidctint uses islow-style table */
break;
case ((8 << 8) + 16):
method_ptr = jpeg_idct_8x16;
method = JDCT_ISLOW; /* jidctint uses islow-style table */
break;
case ((7 << 8) + 14):
method_ptr = jpeg_idct_7x14;
method = JDCT_ISLOW; /* jidctint uses islow-style table */
break;
case ((6 << 8) + 12):
method_ptr = jpeg_idct_6x12;
method = JDCT_ISLOW; /* jidctint uses islow-style table */
break;
case ((5 << 8) + 10):
method_ptr = jpeg_idct_5x10;
method = JDCT_ISLOW; /* jidctint uses islow-style table */
break;
case ((4 << 8) + 8):
method_ptr = jpeg_idct_4x8;
method = JDCT_ISLOW; /* jidctint uses islow-style table */
break;
case ((3 << 8) + 6):
method_ptr = jpeg_idct_3x6;
method = JDCT_ISLOW; /* jidctint uses islow-style table */
break;
case ((2 << 8) + 4):
method_ptr = jpeg_idct_2x4;
method = JDCT_ISLOW; /* jidctint uses islow-style table */
break;
case ((1 << 8) + 2):
method_ptr = jpeg_idct_1x2;
method = JDCT_ISLOW; /* jidctint uses islow-style table */
break;
#endif
case ((DCTSIZE << 8) + DCTSIZE):
switch (cinfo->dct_method) {
#ifdef DCT_ISLOW_SUPPORTED
case JDCT_ISLOW:
method_ptr = jpeg_idct_islow;
method = JDCT_ISLOW;
break;
#endif
#ifdef DCT_IFAST_SUPPORTED
case JDCT_IFAST:
method_ptr = jpeg_idct_ifast;
method = JDCT_IFAST;
break;
#endif
#ifdef DCT_FLOAT_SUPPORTED
case JDCT_FLOAT:
method_ptr = jpeg_idct_float;
method = JDCT_FLOAT;
break;
#endif
default:
ERREXIT(cinfo, JERR_NOT_COMPILED);
break;
}
break;
default:
ERREXIT2(cinfo, JERR_BAD_DCTSIZE,
compptr->DCT_h_scaled_size, compptr->DCT_v_scaled_size);
break;
}
idct->pub.inverse_DCT[ci] = method_ptr;
/* Create multiplier table from quant table.
* However, we can skip this if the component is uninteresting
* or if we already built the table. Also, if no quant table
* has yet been saved for the component, we leave the
* multiplier table all-zero; we'll be reading zeroes from the
* coefficient controller's buffer anyway.
*/
if (! compptr->component_needed || idct->cur_method[ci] == method)
continue;
qtbl = compptr->quant_table;
if (qtbl == NULL) /* happens if no data yet for component */
continue;
idct->cur_method[ci] = method;
switch (method) {
#ifdef PROVIDE_ISLOW_TABLES
case JDCT_ISLOW:
{
/* For LL&M IDCT method, multipliers are equal to raw quantization
* coefficients, but are stored as ints to ensure access efficiency.
*/
ISLOW_MULT_TYPE * ismtbl = (ISLOW_MULT_TYPE *) compptr->dct_table;
for (i = 0; i < DCTSIZE2; i++) {
ismtbl[i] = (ISLOW_MULT_TYPE) qtbl->quantval[i];
}
}
break;
#endif
#ifdef DCT_IFAST_SUPPORTED
case JDCT_IFAST:
{
/* For AA&N IDCT method, multipliers are equal to quantization
* coefficients scaled by scalefactor[row]*scalefactor[col], where
* scalefactor[0] = 1
* scalefactor[k] = cos(k*PI/16) * sqrt(2) for k=1..7
* For integer operation, the multiplier table is to be scaled by
* IFAST_SCALE_BITS.
*/
IFAST_MULT_TYPE * ifmtbl = (IFAST_MULT_TYPE *) compptr->dct_table;
#define CONST_BITS 14
static const INT16 aanscales[DCTSIZE2] = {
/* precomputed values scaled up by 14 bits */
16384, 22725, 21407, 19266, 16384, 12873, 8867, 4520,
22725, 31521, 29692, 26722, 22725, 17855, 12299, 6270,
21407, 29692, 27969, 25172, 21407, 16819, 11585, 5906,
19266, 26722, 25172, 22654, 19266, 15137, 10426, 5315,
16384, 22725, 21407, 19266, 16384, 12873, 8867, 4520,
12873, 17855, 16819, 15137, 12873, 10114, 6967, 3552,
8867, 12299, 11585, 10426, 8867, 6967, 4799, 2446,
4520, 6270, 5906, 5315, 4520, 3552, 2446, 1247
};
SHIFT_TEMPS
for (i = 0; i < DCTSIZE2; i++) {
ifmtbl[i] = (IFAST_MULT_TYPE)
DESCALE(MULTIPLY16V16((INT32) qtbl->quantval[i],
(INT32) aanscales[i]),
CONST_BITS-IFAST_SCALE_BITS);
}
}
break;
#endif
#ifdef DCT_FLOAT_SUPPORTED
case JDCT_FLOAT:
{
/* For float AA&N IDCT method, multipliers are equal to quantization
* coefficients scaled by scalefactor[row]*scalefactor[col], where
* scalefactor[0] = 1
* scalefactor[k] = cos(k*PI/16) * sqrt(2) for k=1..7
* We apply a further scale factor of 1/8.
*/
FLOAT_MULT_TYPE * fmtbl = (FLOAT_MULT_TYPE *) compptr->dct_table;
int row, col;
static const double aanscalefactor[DCTSIZE] = {
1.0, 1.387039845, 1.306562965, 1.175875602,
1.0, 0.785694958, 0.541196100, 0.275899379
};
i = 0;
for (row = 0; row < DCTSIZE; row++) {
for (col = 0; col < DCTSIZE; col++) {
fmtbl[i] = (FLOAT_MULT_TYPE)
((double) qtbl->quantval[i] *
aanscalefactor[row] * aanscalefactor[col] * 0.125);
i++;
}
}
}
break;
#endif
default:
ERREXIT(cinfo, JERR_NOT_COMPILED);
break;
}
}
}
/*
* Initialize IDCT manager.
*/
GLOBAL(void)
jinit_inverse_dct (j_decompress_ptr cinfo)
{
my_idct_ptr idct;
int ci;
jpeg_component_info *compptr;
idct = (my_idct_ptr)
(*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
SIZEOF(my_idct_controller));
cinfo->idct = (struct jpeg_inverse_dct *) idct;
idct->pub.start_pass = start_pass;
for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
ci++, compptr++) {
/* Allocate and pre-zero a multiplier table for each component */
compptr->dct_table =
(*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
SIZEOF(multiplier_table));
MEMZERO(compptr->dct_table, SIZEOF(multiplier_table));
/* Mark multiplier table not yet set up for any method */
idct->cur_method[ci] = -1;
}
}
Jump to Line
Something went wrong with that request. Please try again.