Skip to content

HTTPS clone URL

Subversion checkout URL

You can clone with HTTPS or Subversion.

Download ZIP
Fetching contributors…

Cannot retrieve contributors at this time

executable file 228 lines (210 sloc) 8.82 kb
#! /usr/bin/env bash
#=========================================================================
# Copyright (C) GemStone Systems, Inc. 2010.
#
# Name - install.sh
#
# Purpose - Make sure MagLev and GemStone are setup correctly in a fresh clone
# of MagLev from git://github.com:MagLev/maglev.git. You only need
# to run this once, you can use update.sh from then on.
#
# Be both verbose and idempotent, so we can easily diagnose
# any problems.
#
# $Id:$
#
# Description:
# Does a basic setup of memory and services for MagLev
# Setup for manual MagLev startup rather than automatic startup upon boot
# Safe to run multiple times. Only saves one prior backup repository though.
# Requires root access (using sudo) to change setings and create directories
#
# Actions:
# Verify machine is capable of running MagLev 64-bit
# Add shared memory setup to /etc/sysctl.conf
# Add GemStone netldi service port to /etc/services
# Invoke update.sh to finish the job
#=========================================================================
if [ -x bin/maglev-ruby ]; then
# echo "using $PWD as MAGLEV_HOME"
export MAGLEV_HOME=$PWD
else
echo "[Error] $PWD is not a valid MagLev directory"
echo "To fix this, 'clone git://github.com:MagLev/maglev.git'"
echo "then run install.sh from the resulting directory."
exit 1
fi
# Check that the parent directory is writable
if [ ! -w ".." ]; then
echo "[Error] This script requires write permission on the MagLev parent directory."
/bin/ls -ld ..
echo "To fix this, 'chmod u+w ..'"
exit 1
fi
# Detect operating system
PLATFORM="`uname -sm | tr ' ' '-'`"
# Macs with Core i7 use the same software as older Macs
[ $PLATFORM = "Darwin-x86_64" ] && PLATFORM="Darwin-i386"
# Check we're on a suitable 64-bit machine
case "$PLATFORM" in
Darwin-i386)
OSVERSION="`sw_vers -productVersion`"
MAJOR="`echo $OSVERSION | cut -f1 -d.`"
MINOR="`echo $OSVERSION | cut -f2 -d.`"
CPU_TYPE="`uname -p`"
CPU_CAPABLE="`sysctl hw.cpu64bit_capable | cut -f2 -d' '`"
#
# Check the CPU and Mac OS X profile.
if [[ $CPU_TYPE != "i386" || $CPU_CAPABLE -ne 1 || $MAJOR -lt 10 || $MINOR -lt 5 ]] ; then
echo "[Error] This script requires Mac OS X 10.5 or later on a 64-bit Intel CPU."
exit 1
fi
;;
Linux-x86_64)
# Linux looks OK
;;
SunOS-i86pc)
# Solaris X86 looks OK
;;
*)
echo "[Error] This script only works on a 64-bit Linux, Mac OS X, or Solaris-x86 machine"
echo "The result from \"uname -sm\" is \"`uname -sm`\""
exit 1
;;
esac
# We should run this as a normal user, not root.
if [ `id | cut -f2 -d= | cut -f1 -d\(` -eq 0 ]; then
echo "[Error] This script should be run as a normal user, not root."
exit 1
fi
# We're good to go. Let user know.
machine_name="`uname -n`"
echo "[Info] Configuring $machine_name to run MagLev"
# Do a trivial sudo to test we can and get the password prompt out of the way
sudo date
# Figure out how much total memory is installed
echo "[Info] Setting up shared memory"
#
# Ref: http://wiki.finkproject.org/index.php/Shared_Memory_Regions_on_Darwin
# Ref: http://developer.postgresql.org/pgdocs/postgres/kernel-resources.html
# Ref: http://www.idevelopment.info/data/Oracle/DBA_tips/Linux/LINUX_8.shtml
#
case "$PLATFORM" in
Linux-x86_64)
# use TotalMem: kB because Ubuntu doesn't have Mem: in Bytes
totalMemKB=`awk '/MemTotal:/{print($2);}' /proc/meminfo`
totalMem=$(($totalMemKB * 1024))
# Figure out the max shared memory segment size currently allowed
shmmax=`cat /proc/sys/kernel/shmmax`
# Figure out the max shared memory currently allowed
shmall=`cat /proc/sys/kernel/shmall`
;;
Darwin-i386)
totalMem="`sysctl hw.memsize | cut -f2 -d' '`"
# Figure out the max shared memory segment size currently allowed
shmmax="`sysctl kern.sysv.shmmax | cut -f2 -d' '`"
# Figure out the max shared memory currently allowed
shmall="`sysctl kern.sysv.shmall | cut -f2 -d' '`"
;;
SunOS-i86pc)
# TODO: figure memory needs for Solaris-x86
# Investigate project.max-shm-memory
totalMemMB="`/usr/sbin/prtconf | grep Memory | cut -f3 -d' '`"
totalMem=$(($totalMemMB * 1048576))
shmmax=$(($totalMem / 4))
shmall=$(($shmmax / 4096))
;;
*)
echo "[Error] Can't determine operating system. Check script."
exit 1
;;
esac
totalMemMB=$(($totalMem / 1048576))
shmmaxMB=$(($shmmax / 1048576))
shmallMB=$(($shmall / 256))
# Print current values
echo " Total memory available is $totalMemMB MB"
echo " Max shared memory segment size is $shmmaxMB MB"
echo " Max shared memory allowed is $shmallMB MB"
# Figure out the max shared memory segment size (shmmax) we want
# Use 75% of available memory but not more than 2GB
shmmaxNew=$(($totalMem * 3/4))
[ $shmmaxNew -gt 2147483648 ] && shmmaxNew=2147483648
shmmaxNewMB=$(($shmmaxNew / 1048576))
# Figure out the max shared memory allowed (shmall) we want
# The MacOSX default is 4MB, way too small
# The Linux default is 2097152 or 8GB, so we should never need this
# but things will certainly break if it's been reset too small
# so ensure it's at least big enough to hold a fullsize shared memory segment
shmallNew=$(($shmmaxNew / 4096))
[ $shmallNew -lt $shmall ] && shmallNew=$shmall
shmallNewMB=$(($shmallNew / 256))
# Increase shmmax if appropriate
if [ $shmmaxNew -gt $shmmax ]; then
echo "[Info] Increasing max shared memory segment size to $shmmaxNewMB MB"
[ $PLATFORM = "Darwin-i386" ] && sudo sysctl -w kern.sysv.shmmax=$shmmaxNew
[ $PLATFORM = "Linux-x86_64" ] && sudo bash -c "echo $shmmaxNew > /proc/sys/kernel/shmmax"
[ $PLATFORM = "SunOS-i86pc" ] && echo "[Warning] shmmax must be set manually on Solaris-x86"
else
echo "[Info] No need to increase max shared memory segment size"
fi
# Increase shmall if appropriate
if [ $shmallNew -gt $shmall ]; then
echo "[Info] Increasing max shared memory allowed to $shmallNewMB MB"
[ $PLATFORM = "Darwin-i386" ] && sudo sysctl -w kern.sysv.shmall=$shmallNew
[ $PLATFORM = "Linux-x86_64" ] && sudo bash -c "echo $shmallNew > /proc/sys/kernel/shmall"
[ $PLATFORM = "SunOS-i86pc" ] && echo "[Warning]shmall must be set manually on Solaris-x86"
else
echo "[Info] No need to increase max shared memory allowed"
fi
# At this point, shared memory settings contain the values we want,
# put them in sysctl.conf so they are preserved.
if [[ ! -f /etc/sysctl.conf || `grep -sc "kern.*.shm" /etc/sysctl.conf` -eq 0 ]]; then
case "$PLATFORM" in
Linux-x86_64)
echo "# kernel.shm* settings added by MagLev installation" > /tmp/sysctl.conf.$$
echo "kernel.shmmax=`cat /proc/sys/kernel/shmmax`" >> /tmp/sysctl.conf.$$
echo "kernel.shmall=`cat /proc/sys/kernel/shmall`" >> /tmp/sysctl.conf.$$
;;
Darwin-i386)
# On Mac OS X Leopard, you must have all five settings in sysctl.conf
# before they will take effect.
echo "# kern.sysv.shm* settings added by MagLev installation" > /tmp/sysctl.conf.$$
sysctl kern.sysv.shmmax kern.sysv.shmall kern.sysv.shmmin kern.sysv.shmmni \
kern.sysv.shmseg | tr ":" "=" | tr -d " " >> /tmp/sysctl.conf.$$
;;
SunOS-i86pc)
# Do nothing in Solaris-x86 since /etc/sysctl.conf is ignored on Solaris 10.
# Must configure shared memory settings manually.
;;
*)
echo "[Error] Can't determine operating system. Check script."
exit 1
;;
esac
# Do nothing on Solaris-x86 since /etc/sysctl.conf is ignored on Solaris 10.
if [[ "$PLATFORM" != "SunOS-i86pc" ]]; then
echo "[Info] Adding the following section to /etc/sysctl.conf"
cat /tmp/sysctl.conf.$$
sudo bash -c "cat /tmp/sysctl.conf.$$ >> /etc/sysctl.conf"
/bin/rm -f /tmp/sysctl.conf.$$
fi
else
echo "[Info] The following shared memory settings already exist in /etc/sysctl.conf"
echo "To change them, remove the following lines from /etc/sysctl.conf and rerun this script"
grep "kern.*.shm" /etc/sysctl.conf
fi
# Now setup for NetLDI in case we ever need it.
echo "[Info] Setting up GemStone netldi service port"
if [ `grep -sc "^gs64ldi" /etc/services` -eq 0 ]; then
echo '[Info] Adding "gs64ldi 50378/tcp" to /etc/services'
sudo bash -c 'echo "gs64ldi 50378/tcp # Gemstone netldi" >> /etc/services'
else
echo "[Info] GemStone netldi service port is already set in /etc/services"
echo "To change it, remove the following line from /etc/services and rerun this script"
grep "^gs64ldi" /etc/services
fi
# Make sure we have a compatible version of GemStone
bash ./update.sh
# End of script
exit 0
Jump to Line
Something went wrong with that request. Please try again.