Skip to content

MaloufSleep/ME-ESP8266

master
Switch branches/tags

Name already in use

A tag already exists with the provided branch name. Many Git commands accept both tag and branch names, so creating this branch may cause unexpected behavior. Are you sure you want to create this branch?
Code

Latest commit

 

Git stats

Files

Permalink
Failed to load latest commit information.
Type
Name
Latest commit message
Commit time
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

ME-ESP8266

Malouf Electronics - ESP8266 Dev Board

The ultimate ESP8266 development board built by makers for makers.

Malouf Electronics website

SPECIFICATIONS / FEATURES

  • 16 MB Flash
  • 5V Relay
  • RS232 interface
  • IR Receiver
  • IR LED
  • Terminal Block for Power & RS232
  • Terminal Block for Relay
  • Easily accessible GPIO
  • Micro USB (power & programming)

GETTING STARTED

  1. Download Arduino IDE (https://www.arduino.cc/en/Main/Software)
  2. Setup ESP8266 support for Arduino IDE:
  • Start Arduino and open Preferences window.
  • Enter https://arduino.esp8266.com/stable/package_esp8266com_index.json into the Additional Board Manager URLs field.
  • Open Boards Manager from the Tools > Board menu and find esp8266 platform.
  • Select the version you need from the drop-down box.
  • Click the Install button.
  • Don't forget to select your ESP8266 board from the Tools > Board menu after installation.
  1. Select "Generic ESP8266 Module"
  2. Pick the following from the Tools menu:
  • Upload Speed: 115200
  • CPU Frequency: 80MHz
  • Crystal Frequency: 26MHz
  • Flash Size: 16MB
  • Flash Mode: DOUT
  • Flash Frequency: 40MHz
  • Port: (the serial port of your USB cable)
  1. Paste the code below into a new sketch and upload to the board (In order to upload you may have to hold the boot button until esptool connects):
const int LED_RED = 5;

void setup() {
    pinMode(LED_RED, OUTPUT);     // setup red LED as output
}

void loop() {

    digitalWrite(LED_RED, LOW);   // turn the LED on
    delay(1000);                  // wait for a second

    digitalWrite(LED_RED, HIGH);  // turn the LED off
    delay(1000);                  // wait for a second

}

If all goes well the board will program and the red LED will start blinking.

About

Malouf Electronics - ESP8266 Dev Board

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Contributors 4

  •  
  •  
  •  
  •