Timelapse-Raspberry-Pi-Servo
Raspberry pi project with camera and servo motors that is used for time lapses and temperature value read
Project in progress
Timelapse Demo
Will be added soon
Device board
Breadboard
Components
- 1 x Raspberry pi
- 1 x Camera
- 2 x Servo motors
- 1 x DHT11 temperature-humidity sensor
- 1 x prototype pcb
- 1 x 40 pin gpio connector header
Pin connections
| Raspberry Pi | Components |
|---|---|
| GPIO 17 | Servo Motor 1 |
| GPIO 27 | Servo Motor 2 |
| GPIO 22 | DHT11 |
| GPIO 2 | VCC |
| GPIO 1 | GND |
Run commands and install requirements
pip3 install -r requirements.txt
sudo apt-get install libgpiod2
Requirements.txt contains dependencies
adafruit-circuitpython-dht == 3.5.8
dht11 == 0.1.0
Run application on home network
Open terminal and type python main.py or python3 main.py
License
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.