diff --git a/config/examples/3DFabXYZ/Migbot/Configuration.h b/config/examples/3DFabXYZ/Migbot/Configuration.h index f6829076be3..5de36a8c606 100644 --- a/config/examples/3DFabXYZ/Migbot/Configuration.h +++ b/config/examples/3DFabXYZ/Migbot/Configuration.h @@ -1457,7 +1457,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/ADIMLab/Gantry v1/Configuration.h b/config/examples/ADIMLab/Gantry v1/Configuration.h index 4a04f49d486..f95e9252f55 100644 --- a/config/examples/ADIMLab/Gantry v1/Configuration.h +++ b/config/examples/ADIMLab/Gantry v1/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/ADIMLab/Gantry v2/Configuration.h b/config/examples/ADIMLab/Gantry v2/Configuration.h index a0de867ed0a..28150ef02da 100644 --- a/config/examples/ADIMLab/Gantry v2/Configuration.h +++ b/config/examples/ADIMLab/Gantry v2/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Alfawise/U20-bltouch/Configuration.h b/config/examples/Alfawise/U20-bltouch/Configuration.h index fb5969e82c5..55fcdb62bef 100644 --- a/config/examples/Alfawise/U20-bltouch/Configuration.h +++ b/config/examples/Alfawise/U20-bltouch/Configuration.h @@ -1524,7 +1524,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Alfawise/U20/Configuration.h b/config/examples/Alfawise/U20/Configuration.h index b95e3177962..d5334ab0e48 100644 --- a/config/examples/Alfawise/U20/Configuration.h +++ b/config/examples/Alfawise/U20/Configuration.h @@ -1525,7 +1525,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/AliExpress/CL-260/Configuration.h b/config/examples/AliExpress/CL-260/Configuration.h index bc04c70b082..4bf31587d20 100644 --- a/config/examples/AliExpress/CL-260/Configuration.h +++ b/config/examples/AliExpress/CL-260/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/AliExpress/UM2pExt/Configuration.h b/config/examples/AliExpress/UM2pExt/Configuration.h index fc380cfa004..52b94427b4f 100644 --- a/config/examples/AliExpress/UM2pExt/Configuration.h +++ b/config/examples/AliExpress/UM2pExt/Configuration.h @@ -1456,7 +1456,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Anet/A2/Configuration.h b/config/examples/Anet/A2/Configuration.h index 57b7d2882cf..a556b7f804b 100644 --- a/config/examples/Anet/A2/Configuration.h +++ b/config/examples/Anet/A2/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Anet/A2plus/Configuration.h b/config/examples/Anet/A2plus/Configuration.h index 948647a088e..51401997fdf 100644 --- a/config/examples/Anet/A2plus/Configuration.h +++ b/config/examples/Anet/A2plus/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Anet/A6/Configuration.h b/config/examples/Anet/A6/Configuration.h index 08b9747877b..dd73eacaf2b 100644 --- a/config/examples/Anet/A6/Configuration.h +++ b/config/examples/Anet/A6/Configuration.h @@ -1472,7 +1472,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Anet/A8/Configuration.h b/config/examples/Anet/A8/Configuration.h index abe69771648..c7cfc94e2e7 100644 --- a/config/examples/Anet/A8/Configuration.h +++ b/config/examples/Anet/A8/Configuration.h @@ -1458,7 +1458,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Anet/A8plus/Configuration.h b/config/examples/Anet/A8plus/Configuration.h index 7684a3d736c..d7ad5e2cc25 100644 --- a/config/examples/Anet/A8plus/Configuration.h +++ b/config/examples/Anet/A8plus/Configuration.h @@ -1457,7 +1457,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Anet/A9/Configuration.h b/config/examples/Anet/A9/Configuration.h index a75d2b7ae45..b45d32381dc 100644 --- a/config/examples/Anet/A9/Configuration.h +++ b/config/examples/Anet/A9/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Anet/E10/Configuration.h b/config/examples/Anet/E10/Configuration.h index 6e1a580eebb..cac80db6bc2 100644 --- a/config/examples/Anet/E10/Configuration.h +++ b/config/examples/Anet/E10/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h b/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h index 86dd7b6d67f..6c89b6500dc 100644 --- a/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h +++ b/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h @@ -1457,7 +1457,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Anet/E16/Stock/Configuration.h b/config/examples/Anet/E16/Stock/Configuration.h index 9112e7da896..f6af7c3b0ef 100644 --- a/config/examples/Anet/E16/Stock/Configuration.h +++ b/config/examples/Anet/E16/Stock/Configuration.h @@ -1457,7 +1457,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Anet/ET4+/Configuration.h b/config/examples/Anet/ET4+/Configuration.h index dcd1dcc7bc8..5c84774a13b 100644 --- a/config/examples/Anet/ET4+/Configuration.h +++ b/config/examples/Anet/ET4+/Configuration.h @@ -1461,7 +1461,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Anet/ET4-Pro/Configuration.h b/config/examples/Anet/ET4-Pro/Configuration.h index 7e185b61e61..c40cd429e7d 100644 --- a/config/examples/Anet/ET4-Pro/Configuration.h +++ b/config/examples/Anet/ET4-Pro/Configuration.h @@ -1461,7 +1461,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Anet/ET4/Configuration.h b/config/examples/Anet/ET4/Configuration.h index 98e41d4ef2d..bb6a689d5bf 100644 --- a/config/examples/Anet/ET4/Configuration.h +++ b/config/examples/Anet/ET4/Configuration.h @@ -1461,7 +1461,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Anet/ET4X/Configuration.h b/config/examples/Anet/ET4X/Configuration.h index 99c5dddd3f1..34731b1aa22 100644 --- a/config/examples/Anet/ET4X/Configuration.h +++ b/config/examples/Anet/ET4X/Configuration.h @@ -1461,7 +1461,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Anet/ET5-Pro/Configuration.h b/config/examples/Anet/ET5-Pro/Configuration.h index 88c29b836cd..db2a0bc4c7e 100644 --- a/config/examples/Anet/ET5-Pro/Configuration.h +++ b/config/examples/Anet/ET5-Pro/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Anet/ET5/Configuration.h b/config/examples/Anet/ET5/Configuration.h index e2592ef0b8f..93ec31ea670 100644 --- a/config/examples/Anet/ET5/Configuration.h +++ b/config/examples/Anet/ET5/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Anet/ET5X/Configuration.h b/config/examples/Anet/ET5X/Configuration.h index ec16a44ccf1..6ccda98ae84 100644 --- a/config/examples/Anet/ET5X/Configuration.h +++ b/config/examples/Anet/ET5X/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/AnyCubic/Chiron/Configuration.h b/config/examples/AnyCubic/Chiron/Configuration.h index 6036b3a272b..859f05654eb 100644 --- a/config/examples/AnyCubic/Chiron/Configuration.h +++ b/config/examples/AnyCubic/Chiron/Configuration.h @@ -1458,7 +1458,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h index 68170c91b96..bcbb6d0cf50 100644 --- a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h +++ b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h @@ -1456,7 +1456,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h index 425ee69699a..b7c43e2c7de 100644 --- a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h +++ b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h @@ -1456,7 +1456,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h index 90e8433919c..c2dafa7885a 100644 --- a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h +++ b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/AnyCubic/Vyper/Configuration.h b/config/examples/AnyCubic/Vyper/Configuration.h index 3c807464929..369fa77a548 100644 --- a/config/examples/AnyCubic/Vyper/Configuration.h +++ b/config/examples/AnyCubic/Vyper/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration.h b/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration.h index e12ff2f783d..5844268d6a3 100644 --- a/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration.h +++ b/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration.h @@ -1504,7 +1504,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration.h b/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration.h index 53c862d197c..b186f37d547 100644 --- a/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration.h +++ b/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration.h @@ -1469,7 +1469,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/AnyCubic/i3/Configuration.h b/config/examples/AnyCubic/i3/Configuration.h index ae79f6b93f4..4c2560df437 100644 --- a/config/examples/AnyCubic/i3/Configuration.h +++ b/config/examples/AnyCubic/i3/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/ArmEd/Configuration.h b/config/examples/ArmEd/Configuration.h index acfaaa61d16..14935d0456e 100644 --- a/config/examples/ArmEd/Configuration.h +++ b/config/examples/ArmEd/Configuration.h @@ -1456,7 +1456,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Artillery/Genius Pro/Configuration.h b/config/examples/Artillery/Genius Pro/Configuration.h index 306cdcace54..cb847ba62fb 100644 --- a/config/examples/Artillery/Genius Pro/Configuration.h +++ b/config/examples/Artillery/Genius Pro/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Artillery/Genius/BLTouch/Configuration.h b/config/examples/Artillery/Genius/BLTouch/Configuration.h index d0b0f5f17ae..eb6569ce75c 100644 --- a/config/examples/Artillery/Genius/BLTouch/Configuration.h +++ b/config/examples/Artillery/Genius/BLTouch/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Artillery/Genius/V1/Configuration.h b/config/examples/Artillery/Genius/V1/Configuration.h index ffc1eb462b9..6c68bc1d9f4 100644 --- a/config/examples/Artillery/Genius/V1/Configuration.h +++ b/config/examples/Artillery/Genius/V1/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Artillery/Hornet/Configuration.h b/config/examples/Artillery/Hornet/Configuration.h index 60ec3e19517..088242adec3 100644 --- a/config/examples/Artillery/Hornet/Configuration.h +++ b/config/examples/Artillery/Hornet/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration.h b/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration.h index d66300bd6c6..e8a2234c27c 100644 --- a/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration.h +++ b/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration.h @@ -1471,7 +1471,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Artillery/Sidewinder X1/V1/Configuration.h b/config/examples/Artillery/Sidewinder X1/V1/Configuration.h index 93f7a395dbe..6761798dee8 100644 --- a/config/examples/Artillery/Sidewinder X1/V1/Configuration.h +++ b/config/examples/Artillery/Sidewinder X1/V1/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Artillery/Sidewinder X2/Configuration.h b/config/examples/Artillery/Sidewinder X2/Configuration.h index da96e7fb689..e855337f7f8 100644 --- a/config/examples/Artillery/Sidewinder X2/Configuration.h +++ b/config/examples/Artillery/Sidewinder X2/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Azteeg/X5GT/Configuration.h b/config/examples/Azteeg/X5GT/Configuration.h index 5f52fe57f15..219a90fab88 100644 --- a/config/examples/Azteeg/X5GT/Configuration.h +++ b/config/examples/Azteeg/X5GT/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration.h b/config/examples/BIBO/TouchX/cyclops/Configuration.h index 0ee7c7dd405..bc5010912a7 100644 --- a/config/examples/BIBO/TouchX/cyclops/Configuration.h +++ b/config/examples/BIBO/TouchX/cyclops/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/BIBO/TouchX/default/Configuration.h b/config/examples/BIBO/TouchX/default/Configuration.h index 125e7c00b89..b417a0f6531 100644 --- a/config/examples/BIBO/TouchX/default/Configuration.h +++ b/config/examples/BIBO/TouchX/default/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/BIQU/B1 SE Plus/Configuration.h b/config/examples/BIQU/B1 SE Plus/Configuration.h index 72dae638326..4135f0d9052 100644 --- a/config/examples/BIQU/B1 SE Plus/Configuration.h +++ b/config/examples/BIQU/B1 SE Plus/Configuration.h @@ -1453,7 +1453,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/BIQU/B1 SE/Configuration.h b/config/examples/BIQU/B1 SE/Configuration.h index 54b88cc65db..ee553880e47 100644 --- a/config/examples/BIQU/B1 SE/Configuration.h +++ b/config/examples/BIQU/B1 SE/Configuration.h @@ -1453,7 +1453,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/BIQU/B1/Configuration.h b/config/examples/BIQU/B1/Configuration.h index 5e668df7b62..b116c13b791 100644 --- a/config/examples/BIQU/B1/Configuration.h +++ b/config/examples/BIQU/B1/Configuration.h @@ -1464,7 +1464,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/BIQU/BX/Configuration.h b/config/examples/BIQU/BX/Configuration.h index ab24e0475a6..08c90d3f1fb 100644 --- a/config/examples/BIQU/BX/Configuration.h +++ b/config/examples/BIQU/BX/Configuration.h @@ -1462,7 +1462,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/BIQU/Hurakan/Configuration.h b/config/examples/BIQU/Hurakan/Configuration.h index 05a6b48f6ba..688324bccc0 100644 --- a/config/examples/BIQU/Hurakan/Configuration.h +++ b/config/examples/BIQU/Hurakan/Configuration.h @@ -1457,7 +1457,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/BIQU/Thunder Standard/Configuration.h b/config/examples/BIQU/Thunder Standard/Configuration.h index 0e893d27f21..04999fcba83 100644 --- a/config/examples/BIQU/Thunder Standard/Configuration.h +++ b/config/examples/BIQU/Thunder Standard/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/BQ/Hephestos/Configuration.h b/config/examples/BQ/Hephestos/Configuration.h index 379133509bc..e0fcce1159e 100644 --- a/config/examples/BQ/Hephestos/Configuration.h +++ b/config/examples/BQ/Hephestos/Configuration.h @@ -1456,7 +1456,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/BQ/Hephestos_2/Configuration.h b/config/examples/BQ/Hephestos_2/Configuration.h index 63b581f4eec..f974deade13 100644 --- a/config/examples/BQ/Hephestos_2/Configuration.h +++ b/config/examples/BQ/Hephestos_2/Configuration.h @@ -1469,7 +1469,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/BQ/WITBOX/Configuration.h b/config/examples/BQ/WITBOX/Configuration.h index 14ad97db900..07a8d27594b 100644 --- a/config/examples/BQ/WITBOX/Configuration.h +++ b/config/examples/BQ/WITBOX/Configuration.h @@ -1456,7 +1456,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/CTC/A13/Configuration.h b/config/examples/CTC/A13/Configuration.h index 9d0f4aaf080..81376fe30e7 100644 --- a/config/examples/CTC/A13/Configuration.h +++ b/config/examples/CTC/A13/Configuration.h @@ -1456,7 +1456,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/CTC/Bizer/Configuration.h b/config/examples/CTC/Bizer/Configuration.h index 8ef052381f7..0c327ad21e1 100644 --- a/config/examples/CTC/Bizer/Configuration.h +++ b/config/examples/CTC/Bizer/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h b/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h index 872be551700..e915fd40c14 100644 --- a/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h +++ b/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h @@ -1456,7 +1456,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Cartesio/Configuration.h b/config/examples/Cartesio/Configuration.h index f0b55a62fdc..ac2b39e0bfa 100644 --- a/config/examples/Cartesio/Configuration.h +++ b/config/examples/Cartesio/Configuration.h @@ -1471,7 +1471,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Copymaster3D/300/Configuration.h b/config/examples/Copymaster3D/300/Configuration.h index 9269c7d95d9..76d8aa625f5 100644 --- a/config/examples/Copymaster3D/300/Configuration.h +++ b/config/examples/Copymaster3D/300/Configuration.h @@ -1456,7 +1456,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Copymaster3D/400/Configuration.h b/config/examples/Copymaster3D/400/Configuration.h index 3762aca401b..5c566fed6c0 100644 --- a/config/examples/Copymaster3D/400/Configuration.h +++ b/config/examples/Copymaster3D/400/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Copymaster3D/500/Configuration.h b/config/examples/Copymaster3D/500/Configuration.h index dd056d0126f..b2b757f7218 100644 --- a/config/examples/Copymaster3D/500/Configuration.h +++ b/config/examples/Copymaster3D/500/Configuration.h @@ -1456,7 +1456,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/CR-10 Max/Configuration.h b/config/examples/Creality/CR-10 Max/Configuration.h index 3490c4dddbd..e7ccb5585c0 100644 --- a/config/examples/Creality/CR-10 Max/Configuration.h +++ b/config/examples/Creality/CR-10 Max/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h index b8b1da46a78..0697b1447ac 100644 --- a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -1463,7 +1463,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 3.0/Configuration.h b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 3.0/Configuration.h index a0007470411..abfeaa6e38f 100644 --- a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 3.0/Configuration.h +++ b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 3.0/Configuration.h @@ -1463,7 +1463,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h index e9503fd75d2..e06e7e63dd6 100644 --- a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h @@ -1464,7 +1464,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h index 3b401e55f7b..83fabeef316 100644 --- a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h +++ b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h index 34dd80401e9..a17158ff7d4 100644 --- a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h @@ -1456,7 +1456,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration.h b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration.h index e21435ae5f1..1a2b600d035 100644 --- a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration.h +++ b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration.h @@ -1456,7 +1456,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration.h b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration.h index 18d8e36477a..404b7c30825 100644 --- a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration.h +++ b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h index b5102e8da48..9fd9d6c98cc 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h @@ -1456,7 +1456,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration.h b/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration.h index 8f5ff96bdc2..8f7d4a0ba1c 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration.h +++ b/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration.h @@ -1457,7 +1457,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/CR-10 V2/Configuration.h b/config/examples/Creality/CR-10 V2/Configuration.h index 43087ccfb56..485ed854a08 100644 --- a/config/examples/Creality/CR-10 V2/Configuration.h +++ b/config/examples/Creality/CR-10 V2/Configuration.h @@ -1473,7 +1473,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/CR-10 V3/Configuration.h b/config/examples/Creality/CR-10 V3/Configuration.h index f5a1d326758..6a552da0207 100644 --- a/config/examples/Creality/CR-10 V3/Configuration.h +++ b/config/examples/Creality/CR-10 V3/Configuration.h @@ -1474,7 +1474,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h index eaa19ff0fcb..0531290f7ec 100644 --- a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -1454,7 +1454,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration.h b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration.h index 7c12d99ea64..02f7bee5e74 100644 --- a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration.h +++ b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration.h @@ -1454,7 +1454,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/CR-10/CrealityV1/Configuration.h b/config/examples/Creality/CR-10/CrealityV1/Configuration.h index 58b9d927628..54ffd5f8dcf 100644 --- a/config/examples/Creality/CR-10/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10/CrealityV1/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/CR-10S Pro/Configuration.h b/config/examples/Creality/CR-10S Pro/Configuration.h index f1296f20902..7377960739e 100644 --- a/config/examples/Creality/CR-10S Pro/Configuration.h +++ b/config/examples/Creality/CR-10S Pro/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h index 1392cb86238..36a71247c78 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration.h b/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration.h index cb49508929a..ab19fd8b921 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h index d54a5425a16..16f5a4a1862 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -1456,7 +1456,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h index 0c866247490..d56cc8fd5a9 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/CR-10S/CrealityV1/Configuration.h b/config/examples/Creality/CR-10S/CrealityV1/Configuration.h index 534204be480..ffc0dc5b4d4 100644 --- a/config/examples/Creality/CR-10S/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10S/CrealityV1/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/CR-20 Pro/Configuration.h b/config/examples/Creality/CR-20 Pro/Configuration.h index 76c516a971f..59aa85a3d8e 100644 --- a/config/examples/Creality/CR-20 Pro/Configuration.h +++ b/config/examples/Creality/CR-20 Pro/Configuration.h @@ -1456,7 +1456,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration.h b/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration.h index 99450ab1771..cc23bf502b3 100644 --- a/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration.h +++ b/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration.h @@ -1456,7 +1456,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/CR-20/Stock/Configuration.h b/config/examples/Creality/CR-20/Stock/Configuration.h index 96bcca89d04..f155a64b7c6 100644 --- a/config/examples/Creality/CR-20/Stock/Configuration.h +++ b/config/examples/Creality/CR-20/Stock/Configuration.h @@ -1456,7 +1456,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/CR-30 PrintMill/Configuration.h b/config/examples/Creality/CR-30 PrintMill/Configuration.h index 29350f61d9b..524df14df6e 100644 --- a/config/examples/Creality/CR-30 PrintMill/Configuration.h +++ b/config/examples/Creality/CR-30 PrintMill/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/CR-6 SE/Configuration.h b/config/examples/Creality/CR-6 SE/Configuration.h index c94ceeb5b12..adc1e444516 100644 --- a/config/examples/Creality/CR-6 SE/Configuration.h +++ b/config/examples/Creality/CR-6 SE/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/CR-8/Configuration.h b/config/examples/Creality/CR-8/Configuration.h index 35fb203394d..b3473b30857 100644 --- a/config/examples/Creality/CR-8/Configuration.h +++ b/config/examples/Creality/CR-8/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration.h b/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration.h index 7902438b189..481633cb09d 100644 --- a/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration.h +++ b/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/Ender-2/Configuration.h b/config/examples/Creality/Ender-2/Configuration.h index 1172eba73a0..e0ab2a037af 100644 --- a/config/examples/Creality/Ender-2/Configuration.h +++ b/config/examples/Creality/Ender-2/Configuration.h @@ -1456,7 +1456,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/Ender-3 Max Neo/Configuration.h b/config/examples/Creality/Ender-3 Max Neo/Configuration.h index 13ddcdcbc59..d7add6c144c 100644 --- a/config/examples/Creality/Ender-3 Max Neo/Configuration.h +++ b/config/examples/Creality/Ender-3 Max Neo/Configuration.h @@ -1456,7 +1456,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/Ender-3 Max/Configuration.h b/config/examples/Creality/Ender-3 Max/Configuration.h index c105a765993..402ef4d8331 100644 --- a/config/examples/Creality/Ender-3 Max/Configuration.h +++ b/config/examples/Creality/Ender-3 Max/Configuration.h @@ -1459,7 +1459,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/Ender-3 Neo/Configuration.h b/config/examples/Creality/Ender-3 Neo/Configuration.h index 1e0e64be0fa..77db2ca7a91 100644 --- a/config/examples/Creality/Ender-3 Neo/Configuration.h +++ b/config/examples/Creality/Ender-3 Neo/Configuration.h @@ -1456,7 +1456,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h index 09448a65613..8a7b23fff6a 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h index 5f84bba015e..23d0c343615 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h index 4f463fe1a6c..72437d77506 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h index 7f3430947a1..ee35760667f 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration.h index 110e09457f8..1f8fe077c69 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration.h @@ -1454,7 +1454,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h index 3ed2068c8b6..4c645ffcc5e 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h @@ -1456,7 +1456,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h index 201411a2cc4..894e922ce3c 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h index 1e50f1e0bd5..8bea068d2f5 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h @@ -1456,7 +1456,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/Ender-3 S1 Plus/Configuration.h b/config/examples/Creality/Ender-3 S1 Plus/Configuration.h index 5c574f202a5..7286a45ba5f 100644 --- a/config/examples/Creality/Ender-3 S1 Plus/Configuration.h +++ b/config/examples/Creality/Ender-3 S1 Plus/Configuration.h @@ -1456,7 +1456,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/Ender-3 S1 Pro/Configuration.h b/config/examples/Creality/Ender-3 S1 Pro/Configuration.h index 5e415b3b706..4da459f8e80 100644 --- a/config/examples/Creality/Ender-3 S1 Pro/Configuration.h +++ b/config/examples/Creality/Ender-3 S1 Pro/Configuration.h @@ -1456,7 +1456,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/Ender-3 S1/STM32F1/Configuration.h b/config/examples/Creality/Ender-3 S1/STM32F1/Configuration.h index eac877ec781..ea82aef756a 100644 --- a/config/examples/Creality/Ender-3 S1/STM32F1/Configuration.h +++ b/config/examples/Creality/Ender-3 S1/STM32F1/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/Ender-3 S1/STM32F4/Configuration.h b/config/examples/Creality/Ender-3 S1/STM32F4/Configuration.h index 92da9c34020..5da6fd000af 100644 --- a/config/examples/Creality/Ender-3 S1/STM32F4/Configuration.h +++ b/config/examples/Creality/Ender-3 S1/STM32F4/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/Ender-3 V2 Neo/Configuration.h b/config/examples/Creality/Ender-3 V2 Neo/Configuration.h index a3429b713bf..71278876935 100644 --- a/config/examples/Creality/Ender-3 V2 Neo/Configuration.h +++ b/config/examples/Creality/Ender-3 V2 Neo/Configuration.h @@ -1456,7 +1456,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration.h index 45e91ffd30c..5a42eb23a96 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration.h index d21352df8b4..a431bc0a8fb 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration.h index b766b1701e4..e62960e1198 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration.h index c318d864df3..5a20cfe7342 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration.h b/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration.h index a60a0612d16..d4a0fdaa5e9 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration.h b/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration.h index 4cf2768223e..2766c7ae525 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/Ender-3 V2/LCD Files/Custom Bootscreens/Custom Boot Screen Instructions.md b/config/examples/Creality/Ender-3 V2/LCD Files/Custom Bootscreens/Custom Boot Screen Instructions.md deleted file mode 100644 index b82903b5496..00000000000 --- a/config/examples/Creality/Ender-3 V2/LCD Files/Custom Bootscreens/Custom Boot Screen Instructions.md +++ /dev/null @@ -1,13 +0,0 @@ -# Making a Custom Boot Screen - -To make a custom boot screen there are 5 requirements: - -1. The file format must be JPEG. -2. Progressive must be tuned off in the export settings (under "Advanced" in GIMP). -3. The Sub-sampling format must be chroma quartered (4:2:0) (also under "Advanced" in GIMP). -4. The resolution must be 480x272. - > [!NOTE] - > The left side of the image will be the top. You can compose the image oriented upright as 272x480, but it must be rotated prior to export. (Rotating *during* export only applies a "rotation" attribute that won't be parsed by DWIN / DACAI.) -5. For DACAI the file must be named "`0`" and placed in `private/image`. For DWIN the file must be named "`0_start`" and placed in `DWIN_SET`. - -After replacing the Boot Screen follow the usual screen flashing instructions. diff --git a/config/examples/Creality/Ender-3 V2/LCD Files/Custom Bootscreens/README.md b/config/examples/Creality/Ender-3 V2/LCD Files/Custom Bootscreens/README.md new file mode 100644 index 00000000000..69d7f813452 --- /dev/null +++ b/config/examples/Creality/Ender-3 V2/LCD Files/Custom Bootscreens/README.md @@ -0,0 +1,15 @@ +# Making a Custom Bootscreen + +To make a custom bootscreen there are 5 requirements: + +1. The file format must be JPEG. +2. Progressive must be tuned off in the export settings (under "Advanced" in GIMP). +3. The Sub-sampling format must be chroma quartered (4:2:0) (also under "Advanced" in GIMP). +4. The resolution must be 480x272. + +> [!NOTE] +> The left side of the image will be the top. You can compose the image oriented upright as 272x480, but it must be rotated prior to export. (Rotating *during* export only applies a "rotation" attribute that won't be parsed by DWIN DACAI.) + +5. For DACAI the file must be named "`0`" and placed in `private/image`. For DWIN the file must be named "`0_start`" and placed in `DWIN_SET`. + +After replacing the Bootscreen follow the usual screen flashing instructions. diff --git a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h index 53d183256d3..7bec27e6390 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h @@ -1454,7 +1454,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/Ender-3/BigTreeTech Manta E3 EZ/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech Manta E3 EZ/Configuration.h index 088f1865ab4..fb5e8569614 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech Manta E3 EZ/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech Manta E3 EZ/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration.h index 8a3cd94a5a0..f82fcb4260d 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration.h @@ -1456,7 +1456,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h index d565eb223f2..84f65e32b97 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h @@ -1454,7 +1454,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h index 5fb9ebc7d52..4173549764b 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h @@ -1454,7 +1454,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h index cbd2807a58e..cce9ec1b653 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h @@ -1454,7 +1454,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h index 91366ea340a..e0971a9dc96 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h index fa3b007cf9e..931dba30af2 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h @@ -1454,7 +1454,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h index 3ea2df32254..3f652dca645 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -1454,7 +1454,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h index d6965a90c7a..98b8df31e05 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -1454,7 +1454,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration.h index 984376064ef..126286003d0 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration.h @@ -1454,7 +1454,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/Ender-3/CrealityV1/Configuration.h b/config/examples/Creality/Ender-3/CrealityV1/Configuration.h index 4affd07053b..d92d3be9914 100644 --- a/config/examples/Creality/Ender-3/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-3/CrealityV1/Configuration.h @@ -1456,7 +1456,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/Ender-3/CrealityV422/Configuration.h b/config/examples/Creality/Ender-3/CrealityV422/Configuration.h index d8f5163469d..bbb6133c035 100644 --- a/config/examples/Creality/Ender-3/CrealityV422/Configuration.h +++ b/config/examples/Creality/Ender-3/CrealityV422/Configuration.h @@ -1462,7 +1462,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/Ender-3/CrealityV427/Configuration.h b/config/examples/Creality/Ender-3/CrealityV427/Configuration.h index 7d5f8323805..d50c0331ab2 100644 --- a/config/examples/Creality/Ender-3/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-3/CrealityV427/Configuration.h @@ -1456,7 +1456,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h index 0d17637ed6f..cc6ffb6abd1 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h @@ -1456,7 +1456,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h index 51d8ddd2e02..767e11132cd 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h @@ -1456,7 +1456,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration.h index d5920fa10b9..1b9c2843bea 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration.h @@ -1456,7 +1456,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h index fa95732df3f..ef67dfd0f5a 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h @@ -1456,7 +1456,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h index ba1ea4d74be..395c9f95ac1 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h @@ -1456,7 +1456,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h index 66631728f3f..b1cf2588b71 100644 --- a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h +++ b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h @@ -1461,7 +1461,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration.h index d96340f2f4a..e410fd6584e 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration.h @@ -1454,7 +1454,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration.h index 9d55f99aff5..c7d376a40c5 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration.h @@ -1454,7 +1454,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h index fec39217aea..74e54e24f09 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h @@ -1456,7 +1456,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration.h b/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration.h index 16d47ad2e12..6661e8d51bd 100644 --- a/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration.h +++ b/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration.h @@ -1456,7 +1456,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/Ender-4/Configuration.h b/config/examples/Creality/Ender-4/Configuration.h index 60d371a7c46..97ac4dc381d 100644 --- a/config/examples/Creality/Ender-4/Configuration.h +++ b/config/examples/Creality/Ender-4/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration.h b/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration.h index add61747c03..57ffe017d07 100644 --- a/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration.h +++ b/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/Ender-5 Plus/CrealityV1 (ORIGIN UI)/Configuration.h b/config/examples/Creality/Ender-5 Plus/CrealityV1 (ORIGIN UI)/Configuration.h index 156f05eacb3..2fcd78a30d0 100644 --- a/config/examples/Creality/Ender-5 Plus/CrealityV1 (ORIGIN UI)/Configuration.h +++ b/config/examples/Creality/Ender-5 Plus/CrealityV1 (ORIGIN UI)/Configuration.h @@ -1464,7 +1464,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/Ender-5 Plus/CrealityV1 (RELOADED UI)/Configuration.h b/config/examples/Creality/Ender-5 Plus/CrealityV1 (RELOADED UI)/Configuration.h index 56777789d6f..267b96f36ba 100644 --- a/config/examples/Creality/Ender-5 Plus/CrealityV1 (RELOADED UI)/Configuration.h +++ b/config/examples/Creality/Ender-5 Plus/CrealityV1 (RELOADED UI)/Configuration.h @@ -1464,7 +1464,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h index 0cc9ada581d..5a056cf7909 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h @@ -1463,7 +1463,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h index 8226e482d18..4ce07e7a613 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -1454,7 +1454,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration.h index d1e091332af..c402fc3d584 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration.h @@ -1456,7 +1456,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 3.0 with BLTouch-HighTemp/Configuration.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 3.0 with BLTouch-HighTemp/Configuration.h index ae79083c661..d83d4438be4 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 3.0 with BLTouch-HighTemp/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 3.0 with BLTouch-HighTemp/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h index 6e5e818cb9e..08b28c3c077 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h @@ -1456,7 +1456,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h index c04cf056a6e..9bc413bccb7 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h @@ -1469,7 +1469,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h index 8bb6580532a..9a03ccf1c5b 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h @@ -1456,7 +1456,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/Ender-5 S1/Configuration.h b/config/examples/Creality/Ender-5 S1/Configuration.h index c17245a2c47..6aae293de92 100644 --- a/config/examples/Creality/Ender-5 S1/Configuration.h +++ b/config/examples/Creality/Ender-5 S1/Configuration.h @@ -1485,7 +1485,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h index f53ad913e6d..11ad199cfc8 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h @@ -1456,7 +1456,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h index 3c65c827609..bd6d06b87d1 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h @@ -1456,7 +1456,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h index ab8823905a8..c5c1facc3b2 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -1454,7 +1454,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h index e701dd20d34..5a21e05e7ea 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -1454,7 +1454,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 3.0 with BLTouch/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 3.0 with BLTouch/Configuration.h index 631c83b5efb..32aa6123768 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 3.0 with BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 3.0 with BLTouch/Configuration.h @@ -1457,7 +1457,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/Ender-5/CrealityV1/Configuration.h b/config/examples/Creality/Ender-5/CrealityV1/Configuration.h index d953b5d64e6..d6c19083ee0 100644 --- a/config/examples/Creality/Ender-5/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-5/CrealityV1/Configuration.h @@ -1456,7 +1456,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/Ender-5/CrealityV427/Configuration.h b/config/examples/Creality/Ender-5/CrealityV427/Configuration.h index 7a95f1e3006..af06b5d0e2e 100644 --- a/config/examples/Creality/Ender-5/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-5/CrealityV427/Configuration.h @@ -1456,7 +1456,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Creality/Ender-6/Configuration.h b/config/examples/Creality/Ender-6/Configuration.h index cb5ca7bc971..88c8e5c2520 100644 --- a/config/examples/Creality/Ender-6/Configuration.h +++ b/config/examples/Creality/Ender-6/Configuration.h @@ -1462,7 +1462,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration.h b/config/examples/Dagoma/Disco Ultimate/Configuration.h index 254ff1520ef..e5bf570ba00 100644 --- a/config/examples/Dagoma/Disco Ultimate/Configuration.h +++ b/config/examples/Dagoma/Disco Ultimate/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Daycom/3DP-100/Configuration.h b/config/examples/Daycom/3DP-100/Configuration.h index b168779c10a..0b11d9304b9 100644 --- a/config/examples/Daycom/3DP-100/Configuration.h +++ b/config/examples/Daycom/3DP-100/Configuration.h @@ -1459,7 +1459,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/EXP3D/Imprimante multifonction/Configuration.h b/config/examples/EXP3D/Imprimante multifonction/Configuration.h index a3355af12c7..00db2e76b41 100644 --- a/config/examples/EXP3D/Imprimante multifonction/Configuration.h +++ b/config/examples/EXP3D/Imprimante multifonction/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/EasyThreeD/ET4000PLUS/Configuration.h b/config/examples/EasyThreeD/ET4000PLUS/Configuration.h index 990c63e23b6..db0805d6c2a 100644 --- a/config/examples/EasyThreeD/ET4000PLUS/Configuration.h +++ b/config/examples/EasyThreeD/ET4000PLUS/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Einstart-S/Configuration.h b/config/examples/Einstart-S/Configuration.h index 78ad56fed35..84adfd3e575 100644 --- a/config/examples/Einstart-S/Configuration.h +++ b/config/examples/Einstart-S/Configuration.h @@ -1460,7 +1460,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Elegoo/Neptune 2/Configuration.h b/config/examples/Elegoo/Neptune 2/Configuration.h index 9d1bdaa3ab7..9b523a626e2 100644 --- a/config/examples/Elegoo/Neptune 2/Configuration.h +++ b/config/examples/Elegoo/Neptune 2/Configuration.h @@ -1511,7 +1511,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Eryone/Thinker SE/Configuration.h b/config/examples/Eryone/Thinker SE/Configuration.h index 61e4580fe61..979f4c52c86 100644 --- a/config/examples/Eryone/Thinker SE/Configuration.h +++ b/config/examples/Eryone/Thinker SE/Configuration.h @@ -1477,7 +1477,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Eryone/Thinker V2/Configuration.h b/config/examples/Eryone/Thinker V2/Configuration.h index 9d62e17074e..e34e8d6ba1d 100644 --- a/config/examples/Eryone/Thinker V2/Configuration.h +++ b/config/examples/Eryone/Thinker V2/Configuration.h @@ -1479,7 +1479,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/FYSETC/AIO_II/Configuration.h b/config/examples/FYSETC/AIO_II/Configuration.h index c74f4477f6f..b04edb9f59d 100644 --- a/config/examples/FYSETC/AIO_II/Configuration.h +++ b/config/examples/FYSETC/AIO_II/Configuration.h @@ -1456,7 +1456,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/FYSETC/F6_13/Configuration.h b/config/examples/FYSETC/F6_13/Configuration.h index a84357f498a..be6a684fe6d 100644 --- a/config/examples/FYSETC/F6_13/Configuration.h +++ b/config/examples/FYSETC/F6_13/Configuration.h @@ -1457,7 +1457,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/FYSETC/S6/Configuration.h b/config/examples/FYSETC/S6/Configuration.h index 7a53a99de6e..c5f131ea080 100644 --- a/config/examples/FYSETC/S6/Configuration.h +++ b/config/examples/FYSETC/S6/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Felix/DUAL/Configuration.h b/config/examples/Felix/DUAL/Configuration.h index c259ca7975e..39c9ade9788 100644 --- a/config/examples/Felix/DUAL/Configuration.h +++ b/config/examples/Felix/DUAL/Configuration.h @@ -1456,7 +1456,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Felix/Single/Configuration.h b/config/examples/Felix/Single/Configuration.h index ef0dbe90e21..8be8525ec0f 100644 --- a/config/examples/Felix/Single/Configuration.h +++ b/config/examples/Felix/Single/Configuration.h @@ -1456,7 +1456,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/FlashForge/Creator 2X/Configuration.h b/config/examples/FlashForge/Creator 2X/Configuration.h index 4b1c1fe4aec..0a43f03df2e 100644 --- a/config/examples/FlashForge/Creator 2X/Configuration.h +++ b/config/examples/FlashForge/Creator 2X/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/FlashForge/CreatorPro/Configuration.h b/config/examples/FlashForge/CreatorPro/Configuration.h index c83c825e5cf..2ed599ee0fe 100644 --- a/config/examples/FlashForge/CreatorPro/Configuration.h +++ b/config/examples/FlashForge/CreatorPro/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/FlyingBear/P902/Configuration.h b/config/examples/FlyingBear/P902/Configuration.h index c8699b10fad..b62f165f966 100644 --- a/config/examples/FlyingBear/P902/Configuration.h +++ b/config/examples/FlyingBear/P902/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/FlyingBear/P905H/Configuration.h b/config/examples/FlyingBear/P905H/Configuration.h index 61e04bd7e2f..5535e07fbf7 100644 --- a/config/examples/FlyingBear/P905H/Configuration.h +++ b/config/examples/FlyingBear/P905H/Configuration.h @@ -1459,7 +1459,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/FoamCutter/generic/Configuration.h b/config/examples/FoamCutter/generic/Configuration.h index e01318e4727..bf6e7660126 100644 --- a/config/examples/FoamCutter/generic/Configuration.h +++ b/config/examples/FoamCutter/generic/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/FoamCutter/rcKeith/Configuration.h b/config/examples/FoamCutter/rcKeith/Configuration.h index a4c29b9fcc6..111d8716e04 100644 --- a/config/examples/FoamCutter/rcKeith/Configuration.h +++ b/config/examples/FoamCutter/rcKeith/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/FolgerTech/FT-5 R2/Configuration.h b/config/examples/FolgerTech/FT-5 R2/Configuration.h index 96de394a24e..2ff4455f9f0 100644 --- a/config/examples/FolgerTech/FT-5 R2/Configuration.h +++ b/config/examples/FolgerTech/FT-5 R2/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/FolgerTech/i3-2020/Configuration.h b/config/examples/FolgerTech/i3-2020/Configuration.h index 4ed638efed4..6901b818ccc 100644 --- a/config/examples/FolgerTech/i3-2020/Configuration.h +++ b/config/examples/FolgerTech/i3-2020/Configuration.h @@ -1457,7 +1457,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Formbot/Raptor/Configuration.h b/config/examples/Formbot/Raptor/Configuration.h index 602c136a242..2dbe87ef5b8 100644 --- a/config/examples/Formbot/Raptor/Configuration.h +++ b/config/examples/Formbot/Raptor/Configuration.h @@ -1546,7 +1546,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Formbot/T_Rex_2+/Configuration.h b/config/examples/Formbot/T_Rex_2+/Configuration.h index 1e685488a6e..51fedc7fbe0 100644 --- a/config/examples/Formbot/T_Rex_2+/Configuration.h +++ b/config/examples/Formbot/T_Rex_2+/Configuration.h @@ -1456,7 +1456,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Formbot/T_Rex_3/Configuration.h b/config/examples/Formbot/T_Rex_3/Configuration.h index a4b8925197d..50d071740cd 100644 --- a/config/examples/Formbot/T_Rex_3/Configuration.h +++ b/config/examples/Formbot/T_Rex_3/Configuration.h @@ -1462,7 +1462,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Geeetech/A10/Configuration.h b/config/examples/Geeetech/A10/Configuration.h index 4e454e3f24e..c37a890c90a 100644 --- a/config/examples/Geeetech/A10/Configuration.h +++ b/config/examples/Geeetech/A10/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Geeetech/A10D/Configuration.h b/config/examples/Geeetech/A10D/Configuration.h index e7ac5035e52..0a71638a838 100644 --- a/config/examples/Geeetech/A10D/Configuration.h +++ b/config/examples/Geeetech/A10D/Configuration.h @@ -1454,7 +1454,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Geeetech/A10M/Stock LCD/Configuration.h b/config/examples/Geeetech/A10M/Stock LCD/Configuration.h index b3e1135cc58..4825f88c01a 100644 --- a/config/examples/Geeetech/A10M/Stock LCD/Configuration.h +++ b/config/examples/Geeetech/A10M/Stock LCD/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration.h b/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration.h index 1b278050736..902200c5e32 100644 --- a/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration.h +++ b/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Geeetech/A10PRO/Configuration.h b/config/examples/Geeetech/A10PRO/Configuration.h index 1e492c7bff2..19ef1d4e377 100644 --- a/config/examples/Geeetech/A10PRO/Configuration.h +++ b/config/examples/Geeetech/A10PRO/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Geeetech/A10T/Stock LCD/Configuration.h b/config/examples/Geeetech/A10T/Stock LCD/Configuration.h index fe3356a101f..00e2a4d70f3 100644 --- a/config/examples/Geeetech/A10T/Stock LCD/Configuration.h +++ b/config/examples/Geeetech/A10T/Stock LCD/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration.h b/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration.h index 1b726c1e531..9ebe5800c49 100644 --- a/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration.h +++ b/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Geeetech/A20/Configuration.h b/config/examples/Geeetech/A20/Configuration.h index 3db6dd32da6..8c46208c481 100644 --- a/config/examples/Geeetech/A20/Configuration.h +++ b/config/examples/Geeetech/A20/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Geeetech/A20M/Configuration.h b/config/examples/Geeetech/A20M/Configuration.h index 53728aec2a4..322bbc3e558 100644 --- a/config/examples/Geeetech/A20M/Configuration.h +++ b/config/examples/Geeetech/A20M/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Geeetech/A20T/Configuration.h b/config/examples/Geeetech/A20T/Configuration.h index 61657ea5a29..0a9792928f6 100644 --- a/config/examples/Geeetech/A20T/Configuration.h +++ b/config/examples/Geeetech/A20T/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Geeetech/A30/Configuration.h b/config/examples/Geeetech/A30/Configuration.h index 371cfdd7eed..14e6b9c6b27 100644 --- a/config/examples/Geeetech/A30/Configuration.h +++ b/config/examples/Geeetech/A30/Configuration.h @@ -1453,7 +1453,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Geeetech/A30M/Configuration.h b/config/examples/Geeetech/A30M/Configuration.h index a7d1141ac41..fa8ea622991 100644 --- a/config/examples/Geeetech/A30M/Configuration.h +++ b/config/examples/Geeetech/A30M/Configuration.h @@ -1453,7 +1453,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Geeetech/A30T/Configuration.h b/config/examples/Geeetech/A30T/Configuration.h index 02e7e5ad765..a913c7381f1 100644 --- a/config/examples/Geeetech/A30T/Configuration.h +++ b/config/examples/Geeetech/A30T/Configuration.h @@ -1453,7 +1453,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Geeetech/D200/Configuration.h b/config/examples/Geeetech/D200/Configuration.h index 7fec540af93..04fc3679833 100644 --- a/config/examples/Geeetech/D200/Configuration.h +++ b/config/examples/Geeetech/D200/Configuration.h @@ -1453,7 +1453,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Geeetech/Duplicator5/Configuration.h b/config/examples/Geeetech/Duplicator5/Configuration.h index b3a2ca5bb46..d34a24406e3 100644 --- a/config/examples/Geeetech/Duplicator5/Configuration.h +++ b/config/examples/Geeetech/Duplicator5/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Geeetech/E180/Configuration.h b/config/examples/Geeetech/E180/Configuration.h index 476471e40c4..cd33b1f46c5 100644 --- a/config/examples/Geeetech/E180/Configuration.h +++ b/config/examples/Geeetech/E180/Configuration.h @@ -1454,7 +1454,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Geeetech/GT2560/Configuration.h b/config/examples/Geeetech/GT2560/Configuration.h index 2393be458f4..bf8af18ce96 100644 --- a/config/examples/Geeetech/GT2560/Configuration.h +++ b/config/examples/Geeetech/GT2560/Configuration.h @@ -1460,7 +1460,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h index cd6626a635c..e72d2b390e0 100644 --- a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h +++ b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Geeetech/M201/Configuration.h b/config/examples/Geeetech/M201/Configuration.h index ef803fc4a65..f75221b29ef 100644 --- a/config/examples/Geeetech/M201/Configuration.h +++ b/config/examples/Geeetech/M201/Configuration.h @@ -1453,7 +1453,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Geeetech/MeCreator2/Configuration.h b/config/examples/Geeetech/MeCreator2/Configuration.h index 15a8b65183b..ae577b353ce 100644 --- a/config/examples/Geeetech/MeCreator2/Configuration.h +++ b/config/examples/Geeetech/MeCreator2/Configuration.h @@ -1454,7 +1454,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Geeetech/Me_creator/Configuration.h b/config/examples/Geeetech/Me_creator/Configuration.h index dec78302ab5..7171042512d 100644 --- a/config/examples/Geeetech/Me_creator/Configuration.h +++ b/config/examples/Geeetech/Me_creator/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Geeetech/Me_ducer/Configuration.h b/config/examples/Geeetech/Me_ducer/Configuration.h index 8b018b5f5d8..b91b44e26de 100644 --- a/config/examples/Geeetech/Me_ducer/Configuration.h +++ b/config/examples/Geeetech/Me_ducer/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Geeetech/PI3A PRO/Configuration.h b/config/examples/Geeetech/PI3A PRO/Configuration.h index 77e2f6e65e9..badf2147e98 100644 --- a/config/examples/Geeetech/PI3A PRO/Configuration.h +++ b/config/examples/Geeetech/PI3A PRO/Configuration.h @@ -1465,7 +1465,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h index 855ff2a7cee..23164090c2b 100644 --- a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h @@ -1465,7 +1465,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h index bd5f77747b0..571e359ac40 100644 --- a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h @@ -1465,7 +1465,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h index 5df4c6e2246..a9cf85cd88d 100644 --- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h index 118e40256e4..e99a433bd8d 100644 --- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/HMS434/Configuration.h b/config/examples/HMS434/Configuration.h index e114130b438..1c1c00b5ed9 100644 --- a/config/examples/HMS434/Configuration.h +++ b/config/examples/HMS434/Configuration.h @@ -1453,7 +1453,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Infitary/i3-M508/Configuration.h b/config/examples/Infitary/i3-M508/Configuration.h index 23501d330d9..18d25864d6d 100644 --- a/config/examples/Infitary/i3-M508/Configuration.h +++ b/config/examples/Infitary/i3-M508/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Intamsys/FunmatHT 4988/Configuration.h b/config/examples/Intamsys/FunmatHT 4988/Configuration.h index 34da5e125e5..3e6394d70e4 100644 --- a/config/examples/Intamsys/FunmatHT 4988/Configuration.h +++ b/config/examples/Intamsys/FunmatHT 4988/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/JGAurora/A1/Configuration.h b/config/examples/JGAurora/A1/Configuration.h index 51a6135eb50..5d8a89430a4 100644 --- a/config/examples/JGAurora/A1/Configuration.h +++ b/config/examples/JGAurora/A1/Configuration.h @@ -1459,7 +1459,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/JGAurora/A3/Configuration.h b/config/examples/JGAurora/A3/Configuration.h index cba064e5ab3..e3edd301f93 100644 --- a/config/examples/JGAurora/A3/Configuration.h +++ b/config/examples/JGAurora/A3/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/JGAurora/A5/Configuration.h b/config/examples/JGAurora/A5/Configuration.h index 057552e81d9..b99f37b0cd1 100644 --- a/config/examples/JGAurora/A5/Configuration.h +++ b/config/examples/JGAurora/A5/Configuration.h @@ -1463,7 +1463,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/JGAurora/A5S/Configuration.h b/config/examples/JGAurora/A5S/Configuration.h index 382a7e8b5c2..63230e8f3af 100644 --- a/config/examples/JGAurora/A5S/Configuration.h +++ b/config/examples/JGAurora/A5S/Configuration.h @@ -1459,7 +1459,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/JGAurora/Magic/Configuration.h b/config/examples/JGAurora/Magic/Configuration.h index 9f480df866b..1a450610ca5 100644 --- a/config/examples/JGAurora/Magic/Configuration.h +++ b/config/examples/JGAurora/Magic/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Kingroon/KP3/Configuration.h b/config/examples/Kingroon/KP3/Configuration.h index faeecfcb8aa..ef958c11123 100644 --- a/config/examples/Kingroon/KP3/Configuration.h +++ b/config/examples/Kingroon/KP3/Configuration.h @@ -1454,7 +1454,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Kingroon/KP3S/Configuration.h b/config/examples/Kingroon/KP3S/Configuration.h index 2e04801e6cf..f9a74d8877d 100644 --- a/config/examples/Kingroon/KP3S/Configuration.h +++ b/config/examples/Kingroon/KP3S/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Kingroon/KP3S_Pro/Configuration.h b/config/examples/Kingroon/KP3S_Pro/Configuration.h index 3dca18c29a7..8cb41bbd643 100644 --- a/config/examples/Kingroon/KP3S_Pro/Configuration.h +++ b/config/examples/Kingroon/KP3S_Pro/Configuration.h @@ -1486,7 +1486,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Kingroon/KP5L-DIY/Configuration.h b/config/examples/Kingroon/KP5L-DIY/Configuration.h index a26ea1b1bc9..440bc28a344 100644 --- a/config/examples/Kingroon/KP5L-DIY/Configuration.h +++ b/config/examples/Kingroon/KP5L-DIY/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Labists/ET4/Configuration.h b/config/examples/Labists/ET4/Configuration.h index 645f25dae14..81002fa18fe 100644 --- a/config/examples/Labists/ET4/Configuration.h +++ b/config/examples/Labists/ET4/Configuration.h @@ -1461,7 +1461,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Longer/LK5/Configuration.h b/config/examples/Longer/LK5/Configuration.h index be8e26e1412..f6500d88613 100644 --- a/config/examples/Longer/LK5/Configuration.h +++ b/config/examples/Longer/LK5/Configuration.h @@ -1456,7 +1456,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/LulzBot/Mini2/Teensy/Configuration.h b/config/examples/LulzBot/Mini2/Teensy/Configuration.h index 1263127c20b..cf7afffa995 100644 --- a/config/examples/LulzBot/Mini2/Teensy/Configuration.h +++ b/config/examples/LulzBot/Mini2/Teensy/Configuration.h @@ -1475,7 +1475,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/LulzBot/TAZ4/Configuration.h b/config/examples/LulzBot/TAZ4/Configuration.h index 38c8f8e2b18..868b033ec19 100644 --- a/config/examples/LulzBot/TAZ4/Configuration.h +++ b/config/examples/LulzBot/TAZ4/Configuration.h @@ -1466,7 +1466,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/MBot/Cube/Configuration.h b/config/examples/MBot/Cube/Configuration.h index 82e932953e3..240197279a2 100644 --- a/config/examples/MBot/Cube/Configuration.h +++ b/config/examples/MBot/Cube/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/MakerFarm/Pegasus 12/Configuration.h b/config/examples/MakerFarm/Pegasus 12/Configuration.h index fc9adf0a90d..0ab10390c91 100644 --- a/config/examples/MakerFarm/Pegasus 12/Configuration.h +++ b/config/examples/MakerFarm/Pegasus 12/Configuration.h @@ -1461,7 +1461,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/MakerParts/Configuration.h b/config/examples/MakerParts/Configuration.h index ccc1ac41538..5b90fe8a7fb 100644 --- a/config/examples/MakerParts/Configuration.h +++ b/config/examples/MakerParts/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/MakerTech3D/Proforge2sDual/Configuration.h b/config/examples/MakerTech3D/Proforge2sDual/Configuration.h index c0aed884bf9..d6c957a4a30 100644 --- a/config/examples/MakerTech3D/Proforge2sDual/Configuration.h +++ b/config/examples/MakerTech3D/Proforge2sDual/Configuration.h @@ -1458,7 +1458,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Malyan/M150/Configuration.h b/config/examples/Malyan/M150/Configuration.h index e4697e00727..6a0815435cb 100644 --- a/config/examples/Malyan/M150/Configuration.h +++ b/config/examples/Malyan/M150/Configuration.h @@ -1475,7 +1475,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Malyan/M180/Configuration.h b/config/examples/Malyan/M180/Configuration.h index 58c4e178d66..321b236958d 100644 --- a/config/examples/Malyan/M180/Configuration.h +++ b/config/examples/Malyan/M180/Configuration.h @@ -1456,7 +1456,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Malyan/M200/Configuration.h b/config/examples/Malyan/M200/Configuration.h index 0897164be80..e0a9198c01c 100644 --- a/config/examples/Malyan/M200/Configuration.h +++ b/config/examples/Malyan/M200/Configuration.h @@ -1461,7 +1461,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Micromake/C1/basic/Configuration.h b/config/examples/Micromake/C1/basic/Configuration.h index 46b0933bdcc..b18eeb37ae8 100644 --- a/config/examples/Micromake/C1/basic/Configuration.h +++ b/config/examples/Micromake/C1/basic/Configuration.h @@ -1459,7 +1459,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Micromake/C1/enhanced/Configuration.h b/config/examples/Micromake/C1/enhanced/Configuration.h index c3232d533e2..0c2482febff 100644 --- a/config/examples/Micromake/C1/enhanced/Configuration.h +++ b/config/examples/Micromake/C1/enhanced/Configuration.h @@ -1459,7 +1459,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Mks/Robin/Configuration.h b/config/examples/Mks/Robin/Configuration.h index eb6db945bfa..8bd7ba90db8 100644 --- a/config/examples/Mks/Robin/Configuration.h +++ b/config/examples/Mks/Robin/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Mks/Robin_Lite3/Configuration.h b/config/examples/Mks/Robin_Lite3/Configuration.h index b0ccbb1ce84..aa2f3630a9f 100644 --- a/config/examples/Mks/Robin_Lite3/Configuration.h +++ b/config/examples/Mks/Robin_Lite3/Configuration.h @@ -1463,7 +1463,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Mks/Robin_Pro/Configuration.h b/config/examples/Mks/Robin_Pro/Configuration.h index 9b95f141c71..8b611be9e54 100644 --- a/config/examples/Mks/Robin_Pro/Configuration.h +++ b/config/examples/Mks/Robin_Pro/Configuration.h @@ -1457,7 +1457,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Mks/Sbase/Configuration.h b/config/examples/Mks/Sbase/Configuration.h index 11ff32c5f16..63b1535be07 100644 --- a/config/examples/Mks/Sbase/Configuration.h +++ b/config/examples/Mks/Sbase/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Modix/Big60/Configuration.h b/config/examples/Modix/Big60/Configuration.h index df9a6dc6674..33be7b7df9e 100644 --- a/config/examples/Modix/Big60/Configuration.h +++ b/config/examples/Modix/Big60/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Nextion/Configuration.h b/config/examples/Nextion/Configuration.h index 1df4cc6050e..8ebb32483d3 100644 --- a/config/examples/Nextion/Configuration.h +++ b/config/examples/Nextion/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/ORD Bot/Hadron/Sanguinololu/Configuration.h b/config/examples/ORD Bot/Hadron/Sanguinololu/Configuration.h index 147e78ab6c8..bd7adb5201b 100644 --- a/config/examples/ORD Bot/Hadron/Sanguinololu/Configuration.h +++ b/config/examples/ORD Bot/Hadron/Sanguinololu/Configuration.h @@ -1486,7 +1486,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Opulo/Lumen_REV3/Configuration.h b/config/examples/Opulo/Lumen_REV3/Configuration.h index 3d0f38903f2..836c86b2e84 100644 --- a/config/examples/Opulo/Lumen_REV3/Configuration.h +++ b/config/examples/Opulo/Lumen_REV3/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Opulo/Lumen_REV4/Configuration.h b/config/examples/Opulo/Lumen_REV4/Configuration.h index f33dae8157f..2b08eb7f226 100644 --- a/config/examples/Opulo/Lumen_REV4/Configuration.h +++ b/config/examples/Opulo/Lumen_REV4/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Ortur 4/Configuration.h b/config/examples/Ortur 4/Configuration.h index a5f268a7920..1d55611c5e9 100644 --- a/config/examples/Ortur 4/Configuration.h +++ b/config/examples/Ortur 4/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Polargraph/Configuration.h b/config/examples/Polargraph/Configuration.h index c1373b15a1b..ec3825dd830 100644 --- a/config/examples/Polargraph/Configuration.h +++ b/config/examples/Polargraph/Configuration.h @@ -1459,7 +1459,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Printrbot/PrintrboardG2/Configuration.h b/config/examples/Printrbot/PrintrboardG2/Configuration.h index 974baf4c210..9851832aec5 100644 --- a/config/examples/Printrbot/PrintrboardG2/Configuration.h +++ b/config/examples/Printrbot/PrintrboardG2/Configuration.h @@ -1457,7 +1457,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Printrbot/Simple Metal RevD/Configuration.h b/config/examples/Printrbot/Simple Metal RevD/Configuration.h index 60838ecefad..207ca7253a6 100644 --- a/config/examples/Printrbot/Simple Metal RevD/Configuration.h +++ b/config/examples/Printrbot/Simple Metal RevD/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Prusa/MK3/Configuration.h b/config/examples/Prusa/MK3/Configuration.h index 3fa19176381..62ab06269b1 100644 --- a/config/examples/Prusa/MK3/Configuration.h +++ b/config/examples/Prusa/MK3/Configuration.h @@ -1485,7 +1485,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h index 820d7b72f9a..1659a08ac29 100644 --- a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h +++ b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h @@ -1475,7 +1475,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Qidi/Qidi 1/Configuration.h b/config/examples/Qidi/Qidi 1/Configuration.h index 76bbb5652d0..39b5eec075a 100644 --- a/config/examples/Qidi/Qidi 1/Configuration.h +++ b/config/examples/Qidi/Qidi 1/Configuration.h @@ -1456,7 +1456,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Raiscube/A8r/Configuration.h b/config/examples/Raiscube/A8r/Configuration.h index bf4dc211e42..8689473b35b 100644 --- a/config/examples/Raiscube/A8r/Configuration.h +++ b/config/examples/Raiscube/A8r/Configuration.h @@ -1473,7 +1473,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/RapideLite/RL200/Configuration.h b/config/examples/RapideLite/RL200/Configuration.h index a38aca173cb..74c04324d8a 100644 --- a/config/examples/RapideLite/RL200/Configuration.h +++ b/config/examples/RapideLite/RL200/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Renkforce/RF100/Configuration.h b/config/examples/Renkforce/RF100/Configuration.h index dc47d361cd7..a41e282affd 100644 --- a/config/examples/Renkforce/RF100/Configuration.h +++ b/config/examples/Renkforce/RF100/Configuration.h @@ -1460,7 +1460,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Renkforce/RF100XL/Configuration.h b/config/examples/Renkforce/RF100XL/Configuration.h index fccf2a9e511..2f2ebdad900 100644 --- a/config/examples/Renkforce/RF100XL/Configuration.h +++ b/config/examples/Renkforce/RF100XL/Configuration.h @@ -1460,7 +1460,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Renkforce/RF100v2/Configuration.h b/config/examples/Renkforce/RF100v2/Configuration.h index f963374ee61..73a1699adf8 100644 --- a/config/examples/Renkforce/RF100v2/Configuration.h +++ b/config/examples/Renkforce/RF100v2/Configuration.h @@ -1460,7 +1460,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/RepRapPro/Huxley/Configuration.h b/config/examples/RepRapPro/Huxley/Configuration.h index eac23dc7422..1ede9dbfbf3 100644 --- a/config/examples/RepRapPro/Huxley/Configuration.h +++ b/config/examples/RepRapPro/Huxley/Configuration.h @@ -1496,7 +1496,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/RepRapWorld/Megatronics/Configuration.h b/config/examples/RepRapWorld/Megatronics/Configuration.h index 70995548564..b89acc3f206 100644 --- a/config/examples/RepRapWorld/Megatronics/Configuration.h +++ b/config/examples/RepRapWorld/Megatronics/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/RepRapWorld/Minitronics20/CNC/Configuration.h b/config/examples/RepRapWorld/Minitronics20/CNC/Configuration.h index d73cd9cc7d0..8cab6ffb5e0 100644 --- a/config/examples/RepRapWorld/Minitronics20/CNC/Configuration.h +++ b/config/examples/RepRapWorld/Minitronics20/CNC/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/RigidBot/Configuration.h b/config/examples/RigidBot/Configuration.h index b054c1d3139..d74075ca0fb 100644 --- a/config/examples/RigidBot/Configuration.h +++ b/config/examples/RigidBot/Configuration.h @@ -1469,7 +1469,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Robo3D/R1+/Configuration.h b/config/examples/Robo3D/R1+/Configuration.h index ac531a7a0cd..b7df2029866 100644 --- a/config/examples/Robo3D/R1+/Configuration.h +++ b/config/examples/Robo3D/R1+/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/SCARA/MP_SCARA/Configuration.h b/config/examples/SCARA/MP_SCARA/Configuration.h index a9f9351eda2..6e1adbc80d7 100644 --- a/config/examples/SCARA/MP_SCARA/Configuration.h +++ b/config/examples/SCARA/MP_SCARA/Configuration.h @@ -1457,7 +1457,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/SCARA/Morgan/Configuration.h b/config/examples/SCARA/Morgan/Configuration.h index 57bb91bc294..3d3f94b0eb9 100644 --- a/config/examples/SCARA/Morgan/Configuration.h +++ b/config/examples/SCARA/Morgan/Configuration.h @@ -1456,7 +1456,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration.h b/config/examples/STM32/Black_STM32F407VET6/Configuration.h index a100a93e3b4..88efc825943 100644 --- a/config/examples/STM32/Black_STM32F407VET6/Configuration.h +++ b/config/examples/STM32/Black_STM32F407VET6/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/STM32/STM32F103RE/Configuration.h b/config/examples/STM32/STM32F103RE/Configuration.h index f1c62b785ef..92467f71dbd 100644 --- a/config/examples/STM32/STM32F103RE/Configuration.h +++ b/config/examples/STM32/STM32F103RE/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Simax/Mi-M200/Configuration.h b/config/examples/Simax/Mi-M200/Configuration.h index 6db6aa6f26a..1673821b6f1 100644 --- a/config/examples/Simax/Mi-M200/Configuration.h +++ b/config/examples/Simax/Mi-M200/Configuration.h @@ -1456,7 +1456,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Simulator/Configuration.h b/config/examples/Simulator/Configuration.h index 84d9a98e860..9497f95f7c6 100644 --- a/config/examples/Simulator/Configuration.h +++ b/config/examples/Simulator/Configuration.h @@ -1472,7 +1472,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration.h b/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration.h index 176a1e14893..017d3340fca 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration.h @@ -1463,7 +1463,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration.h index c56a819ee7f..dc7430333a6 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -1461,7 +1461,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration.h b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration.h index d33279840b7..15172ee6515 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration.h @@ -1463,7 +1463,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Sovol/SV-01/CrealityV22/Configuration.h b/config/examples/Sovol/SV-01/CrealityV22/Configuration.h index ed67824f091..62a68edd752 100644 --- a/config/examples/Sovol/SV-01/CrealityV22/Configuration.h +++ b/config/examples/Sovol/SV-01/CrealityV22/Configuration.h @@ -1460,7 +1460,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Sovol/SV-01/CrealityV221/Configuration.h b/config/examples/Sovol/SV-01/CrealityV221/Configuration.h index 8ce77cd434a..876c96371c5 100644 --- a/config/examples/Sovol/SV-01/CrealityV221/Configuration.h +++ b/config/examples/Sovol/SV-01/CrealityV221/Configuration.h @@ -1460,7 +1460,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Sovol/SV-02/Configuration.h b/config/examples/Sovol/SV-02/Configuration.h index b47a206edb4..2f800038274 100644 --- a/config/examples/Sovol/SV-02/Configuration.h +++ b/config/examples/Sovol/SV-02/Configuration.h @@ -1460,7 +1460,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Sovol/SV-03/Configuration.h b/config/examples/Sovol/SV-03/Configuration.h index f892f4285b6..a411c99b2b3 100644 --- a/config/examples/Sovol/SV-03/Configuration.h +++ b/config/examples/Sovol/SV-03/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Sunlu/S8/Configuration.h b/config/examples/Sunlu/S8/Configuration.h index 53de02dd5ef..bc1d68d28bb 100644 --- a/config/examples/Sunlu/S8/Configuration.h +++ b/config/examples/Sunlu/S8/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Sunlu/T3/Configuration.h b/config/examples/Sunlu/T3/Configuration.h index 74cbe3fd6a1..70a7e112e0b 100644 --- a/config/examples/Sunlu/T3/Configuration.h +++ b/config/examples/Sunlu/T3/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/TPARA/AXEL_TPARA/Configuration.h b/config/examples/TPARA/AXEL_TPARA/Configuration.h index d1e0081c401..7fbf0a7229a 100644 --- a/config/examples/TPARA/AXEL_TPARA/Configuration.h +++ b/config/examples/TPARA/AXEL_TPARA/Configuration.h @@ -1459,7 +1459,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Tevo/Michelangelo/Configuration.h b/config/examples/Tevo/Michelangelo/Configuration.h index 0b8125fb544..f5787076146 100644 --- a/config/examples/Tevo/Michelangelo/Configuration.h +++ b/config/examples/Tevo/Michelangelo/Configuration.h @@ -1456,7 +1456,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Tevo/Nereus/Configuration.h b/config/examples/Tevo/Nereus/Configuration.h index 353e2134d95..a3c7f7ad9a3 100644 --- a/config/examples/Tevo/Nereus/Configuration.h +++ b/config/examples/Tevo/Nereus/Configuration.h @@ -1456,7 +1456,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Tevo/Tarantula Pro/MKS Gen_L/Configuration.h b/config/examples/Tevo/Tarantula Pro/MKS Gen_L/Configuration.h index 554e99ee7d5..d0bd3608d3b 100644 --- a/config/examples/Tevo/Tarantula Pro/MKS Gen_L/Configuration.h +++ b/config/examples/Tevo/Tarantula Pro/MKS Gen_L/Configuration.h @@ -1456,7 +1456,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Tevo/Tarantula Pro/MKS SGen_L/Configuration.h b/config/examples/Tevo/Tarantula Pro/MKS SGen_L/Configuration.h index 9aeaf79704e..08fc7e0683e 100644 --- a/config/examples/Tevo/Tarantula Pro/MKS SGen_L/Configuration.h +++ b/config/examples/Tevo/Tarantula Pro/MKS SGen_L/Configuration.h @@ -1456,7 +1456,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h index 65f113102c6..125c55e9f6f 100644 --- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h +++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h @@ -1456,7 +1456,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Tevo/Tornado/V2 (MKS Gen_L)/Configuration.h b/config/examples/Tevo/Tornado/V2 (MKS Gen_L)/Configuration.h index a395f01453d..a57a6ed4444 100644 --- a/config/examples/Tevo/Tornado/V2 (MKS Gen_L)/Configuration.h +++ b/config/examples/Tevo/Tornado/V2 (MKS Gen_L)/Configuration.h @@ -1456,7 +1456,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration.h b/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration.h index cf058d471c2..a18705063d2 100644 --- a/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration.h +++ b/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/TinyBoy2/Configuration.h b/config/examples/TinyBoy2/Configuration.h index a4bcbf3bac5..c993b72b010 100644 --- a/config/examples/TinyBoy2/Configuration.h +++ b/config/examples/TinyBoy2/Configuration.h @@ -1495,7 +1495,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration.h b/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration.h index 8e018b986ec..9af6f282279 100644 --- a/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration.h +++ b/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration.h @@ -1464,7 +1464,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Tronxy/X1/Configuration.h b/config/examples/Tronxy/X1/Configuration.h index 4c3f6ab02cb..53748733391 100644 --- a/config/examples/Tronxy/X1/Configuration.h +++ b/config/examples/Tronxy/X1/Configuration.h @@ -1456,7 +1456,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Tronxy/X3A/Configuration.h b/config/examples/Tronxy/X3A/Configuration.h index ae214ed68a5..55082efc02f 100644 --- a/config/examples/Tronxy/X3A/Configuration.h +++ b/config/examples/Tronxy/X3A/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration.h b/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration.h index b67135f09d9..967a6d1bf34 100644 --- a/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration.h +++ b/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration.h @@ -1456,7 +1456,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration.h b/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration.h index 8b1b80a725b..61313fb8d1e 100644 --- a/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration.h +++ b/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration.h @@ -1464,7 +1464,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Tronxy/X5S/Configuration.h b/config/examples/Tronxy/X5S/Configuration.h index 014e4b13cbc..63c7266a6f9 100644 --- a/config/examples/Tronxy/X5S/Configuration.h +++ b/config/examples/Tronxy/X5S/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Tronxy/X5SA-2E/Configuration.h b/config/examples/Tronxy/X5SA-2E/Configuration.h index 0207c702857..d68f712a09f 100644 --- a/config/examples/Tronxy/X5SA-2E/Configuration.h +++ b/config/examples/Tronxy/X5SA-2E/Configuration.h @@ -1457,7 +1457,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Tronxy/X5SA/Configuration.h b/config/examples/Tronxy/X5SA/Configuration.h index 2aaf1e2b627..654fcf04986 100644 --- a/config/examples/Tronxy/X5SA/Configuration.h +++ b/config/examples/Tronxy/X5SA/Configuration.h @@ -1457,7 +1457,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Tronxy/XY100/Configuration.h b/config/examples/Tronxy/XY100/Configuration.h index 9b83ab100cd..c552a6f5fc5 100644 --- a/config/examples/Tronxy/XY100/Configuration.h +++ b/config/examples/Tronxy/XY100/Configuration.h @@ -1462,7 +1462,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Tronxy/XY2-Pro/Configuration.h b/config/examples/Tronxy/XY2-Pro/Configuration.h index 117c30e30ff..317b780f220 100644 --- a/config/examples/Tronxy/XY2-Pro/Configuration.h +++ b/config/examples/Tronxy/XY2-Pro/Configuration.h @@ -1491,7 +1491,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Two Trees/BlueR Plus/Configuration.h b/config/examples/Two Trees/BlueR Plus/Configuration.h index a11667f0d7f..a1e064abb79 100644 --- a/config/examples/Two Trees/BlueR Plus/Configuration.h +++ b/config/examples/Two Trees/BlueR Plus/Configuration.h @@ -1457,7 +1457,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h b/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h index 6d87fb45369..d2279a889e1 100644 --- a/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h +++ b/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h @@ -1474,7 +1474,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h b/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h index ea88a3a0954..37e86f8a59b 100644 --- a/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h +++ b/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h @@ -1475,7 +1475,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h b/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h index 5cfe2f30e8a..6077452bfb5 100644 --- a/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h +++ b/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h @@ -1486,7 +1486,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration.h b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration.h index 324c37cbea3..f07d75c7564 100644 --- a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration.h +++ b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration.h @@ -1477,7 +1477,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h index 888d3b152ed..11325913e98 100644 --- a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h +++ b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h @@ -1477,7 +1477,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Two Trees/Sapphire Pro/Configuration.h b/config/examples/Two Trees/Sapphire Pro/Configuration.h index 375b368cb45..ba7c8f59feb 100644 --- a/config/examples/Two Trees/Sapphire Pro/Configuration.h +++ b/config/examples/Two Trees/Sapphire Pro/Configuration.h @@ -1472,7 +1472,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/UltiMachine/Archim1/Configuration.h b/config/examples/UltiMachine/Archim1/Configuration.h index 21d12ca2eb0..86884cb10e8 100644 --- a/config/examples/UltiMachine/Archim1/Configuration.h +++ b/config/examples/UltiMachine/Archim1/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/UltiMachine/Archim2/Configuration.h b/config/examples/UltiMachine/Archim2/Configuration.h index 5fa90be334d..07860802fcb 100644 --- a/config/examples/UltiMachine/Archim2/Configuration.h +++ b/config/examples/UltiMachine/Archim2/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Ultimaker/Ultimaker 2+/Configuration.h b/config/examples/Ultimaker/Ultimaker 2+/Configuration.h index a8cfef1b506..ce26dfdc915 100644 --- a/config/examples/Ultimaker/Ultimaker 2+/Configuration.h +++ b/config/examples/Ultimaker/Ultimaker 2+/Configuration.h @@ -1458,7 +1458,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Ultimaker/Ultimaker 2/Configuration.h b/config/examples/Ultimaker/Ultimaker 2/Configuration.h index 2e3ed21f563..eec93b0af2b 100644 --- a/config/examples/Ultimaker/Ultimaker 2/Configuration.h +++ b/config/examples/Ultimaker/Ultimaker 2/Configuration.h @@ -1470,7 +1470,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration.h b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration.h index 4616434b5ab..5127b47219c 100644 --- a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration.h +++ b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration.h b/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration.h index 962a5fecdf9..1925db1f2a5 100644 --- a/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration.h +++ b/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration.h @@ -1458,7 +1458,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration.h b/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration.h index 11b9f8d5dfa..9bdd5c9b6e0 100644 --- a/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration.h +++ b/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration.h @@ -1459,7 +1459,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/VORONDesign/Configuration.h b/config/examples/VORONDesign/Configuration.h index 2eb33a133f4..1041784e40c 100644 --- a/config/examples/VORONDesign/Configuration.h +++ b/config/examples/VORONDesign/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Velleman/K8200 Upgraded/Configuration.h b/config/examples/Velleman/K8200 Upgraded/Configuration.h index ae89dbc40b7..c69e47af42a 100644 --- a/config/examples/Velleman/K8200 Upgraded/Configuration.h +++ b/config/examples/Velleman/K8200 Upgraded/Configuration.h @@ -1490,7 +1490,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Velleman/K8200/Configuration.h b/config/examples/Velleman/K8200/Configuration.h index 9ba80c5c47d..485438e2a0d 100644 --- a/config/examples/Velleman/K8200/Configuration.h +++ b/config/examples/Velleman/K8200/Configuration.h @@ -1493,7 +1493,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration.h b/config/examples/Velleman/K8400/Dual-head/Configuration.h index 9440f5ba06f..60f309a753e 100644 --- a/config/examples/Velleman/K8400/Dual-head/Configuration.h +++ b/config/examples/Velleman/K8400/Dual-head/Configuration.h @@ -1456,7 +1456,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Velleman/K8400/Single-head/Configuration.h b/config/examples/Velleman/K8400/Single-head/Configuration.h index 8dfcb04ae7c..0da6831f9c0 100644 --- a/config/examples/Velleman/K8400/Single-head/Configuration.h +++ b/config/examples/Velleman/K8400/Single-head/Configuration.h @@ -1456,7 +1456,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Voxelab/Aquila/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Voxelab/Aquila/BigTreeTech SKR Mini E3 2.0/Configuration.h index a8d84d9b02f..a2cfe847b1b 100644 --- a/config/examples/Voxelab/Aquila/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Voxelab/Aquila/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -1456,7 +1456,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/WASP/PowerWASP/Configuration.h b/config/examples/WASP/PowerWASP/Configuration.h index bb4008f29dd..85a8513e901 100644 --- a/config/examples/WASP/PowerWASP/Configuration.h +++ b/config/examples/WASP/PowerWASP/Configuration.h @@ -1469,7 +1469,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Wanhao/Duplicator 4S/Configuration.h b/config/examples/Wanhao/Duplicator 4S/Configuration.h index 1bb0ec39b02..dec382fe088 100644 --- a/config/examples/Wanhao/Duplicator 4S/Configuration.h +++ b/config/examples/Wanhao/Duplicator 4S/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Wanhao/Duplicator 6/Configuration.h b/config/examples/Wanhao/Duplicator 6/Configuration.h index ee6f918073e..11595cce6ea 100644 --- a/config/examples/Wanhao/Duplicator 6/Configuration.h +++ b/config/examples/Wanhao/Duplicator 6/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h b/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h index f69496bebdf..ef449f878d4 100644 --- a/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h +++ b/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h index 07852ad3e56..7b8ff3c243c 100644 --- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h +++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h @@ -1456,7 +1456,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Wanhao/Duplicator i3 Plus/Configuration.h b/config/examples/Wanhao/Duplicator i3 Plus/Configuration.h index e4c11a48ea2..7c206b67943 100644 --- a/config/examples/Wanhao/Duplicator i3 Plus/Configuration.h +++ b/config/examples/Wanhao/Duplicator i3 Plus/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Weedo/Tina2/V2/Configuration.h b/config/examples/Weedo/Tina2/V2/Configuration.h index d1131391b0e..51ed85250d6 100644 --- a/config/examples/Weedo/Tina2/V2/Configuration.h +++ b/config/examples/Weedo/Tina2/V2/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Weedo/Tina2/V3/Configuration.h b/config/examples/Weedo/Tina2/V3/Configuration.h index 0385085438d..88a7e623452 100644 --- a/config/examples/Weedo/Tina2/V3/Configuration.h +++ b/config/examples/Weedo/Tina2/V3/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Weistek/wt150/Configuration.h b/config/examples/Weistek/wt150/Configuration.h index 9312853791b..31a5eac240d 100644 --- a/config/examples/Weistek/wt150/Configuration.h +++ b/config/examples/Weistek/wt150/Configuration.h @@ -1456,7 +1456,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Zonestar/P802M/Configuration.h b/config/examples/Zonestar/P802M/Configuration.h index 610ac0de796..6232f8e2883 100644 --- a/config/examples/Zonestar/P802M/Configuration.h +++ b/config/examples/Zonestar/P802M/Configuration.h @@ -1455,7 +1455,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h index c7869e9ad6c..3c115534f96 100644 --- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h +++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h @@ -1460,7 +1460,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h index 4ca8a320666..29510d97298 100755 --- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h +++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h @@ -1459,7 +1459,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h index 534451f0d45..9e5d6852afc 100644 --- a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h +++ b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h @@ -1512,7 +1512,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/delta/Anycubic/Kossel/Configuration.h b/config/examples/delta/Anycubic/Kossel/Configuration.h index 11ae49b6a1f..bbe653b7056 100644 --- a/config/examples/delta/Anycubic/Kossel/Configuration.h +++ b/config/examples/delta/Anycubic/Kossel/Configuration.h @@ -1517,7 +1517,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/delta/Anycubic/Predator/Configuration.h b/config/examples/delta/Anycubic/Predator/Configuration.h index 1e16dc620d9..591927c1460 100644 --- a/config/examples/delta/Anycubic/Predator/Configuration.h +++ b/config/examples/delta/Anycubic/Predator/Configuration.h @@ -1463,7 +1463,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration.h b/config/examples/delta/Dreammaker/Overlord/Configuration.h index 44ac4305d1b..4cac878f019 100644 --- a/config/examples/delta/Dreammaker/Overlord/Configuration.h +++ b/config/examples/delta/Dreammaker/Overlord/Configuration.h @@ -1462,7 +1462,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h index 2d387e061a6..296ae5243cd 100644 --- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h +++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h @@ -1469,7 +1469,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h index cc23a59595f..96fc185beb0 100644 --- a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h +++ b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h @@ -1464,7 +1464,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h b/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h index 38cbb8ce81b..997b0ad67dd 100644 --- a/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h +++ b/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h @@ -1462,7 +1462,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/delta/FLSUN/QQ-S/Configuration.h b/config/examples/delta/FLSUN/QQ-S/Configuration.h index b7e44ea78db..0339429761d 100644 --- a/config/examples/delta/FLSUN/QQ-S/Configuration.h +++ b/config/examples/delta/FLSUN/QQ-S/Configuration.h @@ -1463,7 +1463,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/delta/FLSUN/QQS-Pro/Configuration.h b/config/examples/delta/FLSUN/QQS-Pro/Configuration.h index 740a5107358..d839ab599e5 100644 --- a/config/examples/delta/FLSUN/QQS-Pro/Configuration.h +++ b/config/examples/delta/FLSUN/QQS-Pro/Configuration.h @@ -1463,7 +1463,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h index 72e4df34ea5..c055f351187 100644 --- a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h +++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h @@ -1463,7 +1463,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/delta/FLSUN/kossel/Configuration.h b/config/examples/delta/FLSUN/kossel/Configuration.h index d8344c11ae9..69e95cf8d6e 100644 --- a/config/examples/delta/FLSUN/kossel/Configuration.h +++ b/config/examples/delta/FLSUN/kossel/Configuration.h @@ -1463,7 +1463,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration.h b/config/examples/delta/FLSUN/kossel_mini/Configuration.h index e7695222197..219be8d5bdc 100644 --- a/config/examples/delta/FLSUN/kossel_mini/Configuration.h +++ b/config/examples/delta/FLSUN/kossel_mini/Configuration.h @@ -1463,7 +1463,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/delta/Geeetech/G2/Configuration.h b/config/examples/delta/Geeetech/G2/Configuration.h index 8afba1a36d0..4699c090ea4 100644 --- a/config/examples/delta/Geeetech/G2/Configuration.h +++ b/config/examples/delta/Geeetech/G2/Configuration.h @@ -1463,7 +1463,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/delta/Geeetech/G2Pro/Configuration.h b/config/examples/delta/Geeetech/G2Pro/Configuration.h index 82645367ef2..1f6ea49104f 100644 --- a/config/examples/delta/Geeetech/G2Pro/Configuration.h +++ b/config/examples/delta/Geeetech/G2Pro/Configuration.h @@ -1463,7 +1463,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/delta/Geeetech/G2S/Configuration.h b/config/examples/delta/Geeetech/G2S/Configuration.h index 531004f4963..7b7ec8fcb4f 100644 --- a/config/examples/delta/Geeetech/G2S/Configuration.h +++ b/config/examples/delta/Geeetech/G2S/Configuration.h @@ -1463,7 +1463,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/delta/Geeetech/G2SPro/Configuration.h b/config/examples/delta/Geeetech/G2SPro/Configuration.h index a2a2e8ee501..dfec4237636 100644 --- a/config/examples/delta/Geeetech/G2SPro/Configuration.h +++ b/config/examples/delta/Geeetech/G2SPro/Configuration.h @@ -1463,7 +1463,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration.h b/config/examples/delta/Geeetech/Rostock 301/Configuration.h index a5f7a8f8a6f..bac9a7342dc 100644 --- a/config/examples/delta/Geeetech/Rostock 301/Configuration.h +++ b/config/examples/delta/Geeetech/Rostock 301/Configuration.h @@ -1463,7 +1463,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/delta/Hatchbox_Alpha/Configuration.h b/config/examples/delta/Hatchbox_Alpha/Configuration.h index 52cccb3493e..e64c461f9a7 100644 --- a/config/examples/delta/Hatchbox_Alpha/Configuration.h +++ b/config/examples/delta/Hatchbox_Alpha/Configuration.h @@ -1468,7 +1468,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/delta/MKS/SBASE/Configuration.h b/config/examples/delta/MKS/SBASE/Configuration.h index 5d7f56a8b7c..9c3d785238d 100644 --- a/config/examples/delta/MKS/SBASE/Configuration.h +++ b/config/examples/delta/MKS/SBASE/Configuration.h @@ -1463,7 +1463,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/delta/Malyan M300/Configuration.h b/config/examples/delta/Malyan M300/Configuration.h index c93d9da679e..c874ab9ad8d 100644 --- a/config/examples/delta/Malyan M300/Configuration.h +++ b/config/examples/delta/Malyan M300/Configuration.h @@ -1456,7 +1456,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/delta/Tevo Little Monster/Configuration.h b/config/examples/delta/Tevo Little Monster/Configuration.h index dc150695a24..a9431ce79d6 100644 --- a/config/examples/delta/Tevo Little Monster/Configuration.h +++ b/config/examples/delta/Tevo Little Monster/Configuration.h @@ -1464,7 +1464,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/delta/Velleman/K8800/Configuration.h b/config/examples/delta/Velleman/K8800/Configuration.h index 56408cd2849..49e20d92437 100644 --- a/config/examples/delta/Velleman/K8800/Configuration.h +++ b/config/examples/delta/Velleman/K8800/Configuration.h @@ -1490,7 +1490,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/delta/generic/Configuration.h b/config/examples/delta/generic/Configuration.h index 15c12b80926..233b16f8de5 100644 --- a/config/examples/delta/generic/Configuration.h +++ b/config/examples/delta/generic/Configuration.h @@ -1463,7 +1463,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/delta/kossel_clear/Configuration.h b/config/examples/delta/kossel_clear/Configuration.h index 899affb8079..e501c140a4f 100644 --- a/config/examples/delta/kossel_clear/Configuration.h +++ b/config/examples/delta/kossel_clear/Configuration.h @@ -1463,7 +1463,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/delta/kossel_mini/Configuration.h b/config/examples/delta/kossel_mini/Configuration.h index 5ac68512fcc..28d16270b9b 100644 --- a/config/examples/delta/kossel_mini/Configuration.h +++ b/config/examples/delta/kossel_mini/Configuration.h @@ -1463,7 +1463,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/delta/kossel_pro/Configuration.h b/config/examples/delta/kossel_pro/Configuration.h index 12f9fbfcae6..05a811abf8e 100644 --- a/config/examples/delta/kossel_pro/Configuration.h +++ b/config/examples/delta/kossel_pro/Configuration.h @@ -1475,7 +1475,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/delta/kossel_xl/Configuration.h b/config/examples/delta/kossel_xl/Configuration.h index 43f7eaffca8..183a028a02e 100644 --- a/config/examples/delta/kossel_xl/Configuration.h +++ b/config/examples/delta/kossel_xl/Configuration.h @@ -1469,7 +1469,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/gCreate/gMax1.5+/Configuration.h b/config/examples/gCreate/gMax1.5+/Configuration.h index 641832c6d07..83f8f1bebe1 100644 --- a/config/examples/gCreate/gMax1.5+/Configuration.h +++ b/config/examples/gCreate/gMax1.5+/Configuration.h @@ -1462,7 +1462,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration.h b/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration.h index 8774c692f95..e7503b30e71 100644 --- a/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration.h +++ b/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration.h @@ -1467,7 +1467,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration.h b/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration.h index b1e6fee42c7..daa87d6f99e 100644 --- a/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration.h +++ b/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration.h @@ -1442,7 +1442,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/makibox/Configuration.h b/config/examples/makibox/Configuration.h index 1aa0e3c7ec0..512865e2112 100644 --- a/config/examples/makibox/Configuration.h +++ b/config/examples/makibox/Configuration.h @@ -1458,7 +1458,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif diff --git a/config/examples/tvrrug/Round2/Configuration.h b/config/examples/tvrrug/Round2/Configuration.h index bb8008e4e41..07e6784fc27 100644 --- a/config/examples/tvrrug/Round2/Configuration.h +++ b/config/examples/tvrrug/Round2/Configuration.h @@ -1462,7 +1462,6 @@ * Uses I2C port, so it requires I2C library markyue/Panda_SoftMasterI2C. */ //#define BD_SENSOR - #if ENABLED(BD_SENSOR) //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point #endif