New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

[1.1.x] Add Creality CR-8 configuration #10285

merged 1 commit into from Apr 3, 2018


None yet
2 participants
Copy link

D-side commented Apr 2, 2018

This adds a working configuration for Creality CR-8 that utilizes the same board as Ender-4 but has somewhat different mechanics and settings. It originally ships with Marlin 1.0.0 and, folks, I am seeing a ton of progress since. Nice work!

Motion and PID settings were pulled off the original firmware's output:

echo: External Reset
Marlin 1.0.0
echo: Last Updated: Jan 20 2016 10:24:51 | Author: (none, default config)
Compiled: Jan 20 2016
echo: Free Memory: 3660  PlannerBufferBytes: 1232
echo:Hardcoded Default Settings Loaded
echo:Steps per unit:
echo:  M92 X80.00 Y80.00 Z400.00 E92.60
echo:Maximum feedrates (mm/s):
echo:  M203 X500.00 Y500.00 Z5.00 E25.00
echo:Maximum Acceleration (mm/s2):
echo:  M201 X500 Y500 Z100 E5000
echo:Acceleration: S=acceleration, T=retract acceleration
echo:  M204 S500.00 T500.00
echo:Advanced variables: S=Min feedrate (mm/s), T=Min travel feedrate (mm/s), B=minimum segment time (ms), X=maximum XY jerk (mm/s),  Z=maximum Z jerk (mm/s),  E=maximum E jerk (mm/s)
echo:  M205 S0.00 T0.00 B20000 X20.00 Z0.40 E5.00
echo:Home offset (mm):
echo:  M206 X0.00 Y0.00 Z0.00
echo:PID settings:
echo:   M301 P21.73 I1.54 D76.55
echo:SD init fail

Movement feels mostly like stock firmware, maybe somewhat more firm, not sure why. Totally loving the new features the upgrade brought in. Thanks, folks!

Only printed a 20mm calibration cube in PLA so far. Satisfied with it. Precision is intact.

@thinkyhead thinkyhead force-pushed the D-side:cr-8-config branch from 6013af8 to 7c2b9c0 Apr 3, 2018

@thinkyhead thinkyhead merged commit de5f69b into MarlinFirmware:bugfix-1.1.x Apr 3, 2018

1 check was pending

continuous-integration/travis-ci/pr The Travis CI build is in progress

@D-side D-side deleted the D-side:cr-8-config branch Apr 4, 2018

Custom3DProducts added a commit to Custom3DProducts/Marlin-1 that referenced this pull request Aug 11, 2018

thinkyhead added a commit that referenced this pull request Sep 22, 2018

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment