Permalink
Commits on Sep 11, 2014
  1. gplugd: purge binary files

    Ashokkumar G
    Ashokkumar G committed Sep 11, 2014
    Delete all binary files pushed onto source repository
    
    Signed-off-by: Ashokkumar G <0xfee1dead.sa@gmail.com>
Commits on Feb 6, 2014
  1. gplugd: u-boot image updated

    yogip2182 committed Feb 6, 2014
    md5sum u-boot.bin
    f1e2b306ba0aa3f5251ba11a31c22a19  u-boot.bin
    
    Signed-off-by: Yogi P <yogi@vadactro.org.in>
  2. gplugd: Set MAC address of ethernet based on MFG data.

    yogip2182 committed Feb 6, 2014
    One time programmable memory can be accessed by
    flash reading with command 0x77. This contains
    ethernet mac address and serial number.
    
    Use same macaddress for configuring ethaddr
    environment variable.
    
    MFG (Manufacturing) data can be seen with custom uboot command
    'mfg_data'.
    
    (Based on work of pranav.tipnis@einfochips.com)
    
    Signed-off-by: Yogi P <yogi@vadactro.org.in>
Commits on Dec 22, 2013
  1. md5sum u-boot.bin

    yogip2182 committed Dec 22, 2013
    #b7d5e096e44a7d1497987122f102d71f  u-boot.bin
    
    Signed-off-by: Yogi P <yogi@vadactro.org.in>
  2. gplugd: Forcing max mmc block counts to 8

    yogip2182 committed Dec 22, 2013
    Signed-off-by: Yogi P <yogi@vadactro.org.in>
Commits on Oct 2, 2013
  1. gplugd: fixing typo for MFP040_MMC1_D1

    yogip2182 committed Oct 2, 2013
    Signed-off-by: Yogi P <yogi@vadactro.org.in>
Commits on Sep 29, 2013
  1. gplugd: Configuring default uboot environment

    yogip2182 committed Sep 29, 2013
    Configuring default uboot environment for following
    things
    a) By default boot from usb.
    b) To boot from mmc one can just set bootcmd to 'run
       mmc_bootcmd'
    c) Configure defaults for ethernet; for tftpboot to
       work.
    d) Option to disable ddr2-test.
       Fire 'run ddr-test-disable' to disable ddr test.
    e) Enable bootz.
       One can now boot using zImage and uImage.
    
    Signed-off-by: Yogi P <yogi@vadactro.org.in>
  2. gplugd: Enable SPI flash init & config Env

    yogip2182 committed Sep 29, 2013
    setenv var_name var_value; saveenv;
    
    with this value of var_name will persist even
    after the reset.
    
    Signed-off-by: Yogi P <yogi@vadactro.org.in>
Commits on Sep 20, 2013
  1. gplugd: Adding mmc support for gplugd

    yogip2182 committed Sep 20, 2013
    a) Define MFPs for MMC1 and MMC2.
    b) Enable EXT4 support.
    c) Adding new mmc driver pxa_sdh, used from
       non-upstream uboot source. Can be found
       at http://www.plugcomputer.org/downloads/gplugd/
       see. uboot_gplugd_v0.6_final.tar.gz
    
    Signed-off-by: Yogi P <yogi@vadactro.org.in>
Commits on Sep 17, 2013
  1. Prepare v2013.10-rc3

    trini committed Sep 17, 2013
    Signed-off-by: Tom Rini <trini@ti.com>
Commits on Sep 13, 2013
Commits on Sep 12, 2013
  1. Revert "standalone-examples: support custom GCC lib"

    trini committed Sep 10, 2013
    After further testing, this patch has two problems.  First,
    examples/standalone/Makefile was already inherting PLATFORM_LIBS from
    the top-level Makefile so this lead to duplicating the private libgcc.
    Second, currently the private libgcc has a reference to 'hang' that is
    not being fulfilled.
    
    This reverts commit 4412db4.
    
    Signed-off-by: Tom Rini <trini@ti.com>
  2. Merge and reformat boards.cfg and MAINTAINERS

    albert-aribaud-u-boot authored and trini committed Sep 11, 2013
    Put all informations about targets, including state (active or
    orphan) and maintainers, in boards.cfg; remove MAINTAINERS;
    adjust the build system accordingly.
    
    Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
Commits on Sep 11, 2013
  1. arm:goni:mmc: Add sd card detection and initialization.

    bobenstein authored and MinkyuKang committed Sep 10, 2013
    This change allow to use sd card on Goni the same like mmc 0.
    SD card is mmc dev 1, so it can be used like this: "fatls mmc 1:2".
    SD card is inited even if eMMC initialization fails.
    
    Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
    Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
    CC: Minkyu Kang <mk7.kang@samsung.com>
    Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
    Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
  2. arm:mmc:goni/exynos: Fix wrong mmc base register devices offset.

    bobenstein authored and MinkyuKang committed Sep 3, 2013
    On s5pc1xx mmc devices offset is multiply of 0x100000,
    wrong value was 0x10000. Register offset always points
    to mmc 0 before this change.
    
    Add macro definition of mmc dev register offset to s5pc1xx and
    exynos mmc.
    
    Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
    Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
    CC: Minkyu Kang <mk7.kang@samsung.com>
    Acked-by: Jaehoon Chung <jh80.chung at samsung.com>
    Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
  3. dts: samsung: arndale: Fix include path

    Chander Kashyap authored and MinkyuKang committed Sep 10, 2013
    As per new convention ARCH_CPU_DTS is not defined in "dtc/Makefile".
    Hence Arndale comilation is failing. Fix this by adding proper include
    file in "board/samsung/dts/exynos5250-arndale.dts".
    
    Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org>
    Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Commits on Sep 10, 2013
  1. powerpc/mpc85xx: Add workaround for erratum A-005125

    York Sun
    York Sun committed Aug 20, 2013
    In a very rare condition, a system hang is possible when the e500 core
    initiates a guarded load to PCI / PCIe /SRIO performs a coherent write
    to memory. Please refer to errata document for more details. This erratum
    applies to the following SoCs and their variants, if any.
    
    BSC9132
    BSC9131
    MPC8536
    MPC8544
    MPC8548
    MPC8569
    MPC8572
    P1010
    P1020
    P1021
    P1022
    P1023
    P2020
    C29x
    
    Signed-off-by: York Sun <yorksun@freescale.com>
    CC: Scott Wood <scottwood@freescale.com>
  2. powerpc/p2041: fix I2C controller's offset

    Shaohui Xie York Sun
    Shaohui Xie authored and York Sun committed Sep 10, 2013
    Without this patch, SPD access will fail which leads to DDR init fail.
    
    Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
    Tested-by: Chris Packham <judge.packham@gmail.com>
    Acked-by: York Sun <yorksun@freescale.com>
Commits on Sep 9, 2013
  1. powerpc/mpc85xx: Fix the I2C bus speed error on p1022

    Tang Yuantian authored and hsdenx committed Sep 6, 2013
    The source clock frequency of I2C bus on p1022 is the platform(CCB)
    clock, not CCB/2. The wrong source clock frequency leads to wrong
    I2C bus speed setting. so, fixed it.
    
    Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com>
  2. SPL: P1022DS: switch to new multibus/multiadapter support

    Ying Zhang authored and hsdenx committed Sep 4, 2013
    - Added section "u_boot_list" in arch/powerpc/cpu/mpc85xx/u-boot-spl.lds
    - Use the function i2c_init_all instead of i2c_init
    
    Signed-off-by: Ying Zhang <b40530@freescale.com>
Commits on Sep 7, 2013
  1. ppc4xx: Fix GPIO handling in lwmon5 and lcd4_lwmon5 BSP

    stroese committed Aug 26, 2013
    LCD4 needs a slightly different GPIO configuration than the
    original LWMON5 variant. GPIO49 needs to be configured to a
    default output value of 0 (permanent voltage supply).
    
    Additionally lcd4 also needs to enable the LSB transmitter.
    
    Signed-off-by: Stefan Roese <sr@denx.de>
Commits on Sep 6, 2013
  1. cam_enc_4xx: Move CONFIG_SPL_PAD_TO to a config header

    masahir0y authored and trini committed Sep 1, 2013
    For most boards which define CONFIG_SPL_PAD_TO,
    it is defined in config header files.
    Currently, there exists only one exception, cam_enc_4xx board.
    
    This patch moves CONFIG_SPL_PAD_TO definition
    from board/ait/cam_enc_4xx/config.mk
    to include/configs/cam_enc_4xx.h.
    
    With this modification, we can delete a glue code
    in the top level config.mk:
    
    ifneq ($(CONFIG_SPL_PAD_TO),)
    CPPFLAGS += -DCONFIG_SPL_PAD_TO=$(CONFIG_SPL_PAD_TO)
    endif
    
    Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
    Cc: Heiko Schocher <hs@denx.de>
  2. config.mk: Delete unnecessary code

    masahir0y authored and trini committed Sep 1, 2013
    Currently no makefiles (board-specific config.mk)
    set the following variables:
    
    CONFIG_SPL_TEXT_BASE
    CONFIG_UBOOT_PAD_TO
    CONFIG_RESET_VECTOR_ADDRESS
    CONFIG_TPL_PAD_TO
    
    For all target boards using above macros
    they are set in header files (include/configs/*.h),
    so we do not need to set them as CPPFLAGS.
    
    Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
  3. fw_env: fix writing environment for mtd devices

    olistudent authored and trini committed Aug 29, 2013
    Signed-off-by: Oliver Metz <oliver@freetz.org>
    Tested-by: Luka Perkov <luka@openwrt.org>
  4. fw_env: add redundant env support for MTD_ABSENT

    olistudent authored and trini committed Aug 29, 2013
    Signed-off-by: Oliver Metz <oliver@freetz.org>
    Tested-by: Luka Perkov <luka@openwrt.org>
  5. mail: Fix email address

    Marek Vasut authored and trini committed Aug 27, 2013
    Fix my email address.
    
    Signed-off-by: Marek Vasut <marex@denx.de>
    Cc: Tom Rini <trini@ti.com>
  6. Always build u-boot.img when using CONFIG_SPL_FRAMEWORK

    hno authored and trini committed Aug 26, 2013
    Use of uImage formatted u-boot have long been preferred, and recent
    changes to better support Falcon mode on MMC now enforces it on MMC.
    
    Signed-off-by: Henrik Nordstrom <henrik@henriknordstrom.net>
  7. ahci: convert to use libata functions and definitions

    Rob Herring authored and trini committed Aug 24, 2013
    libata already has similar functions as implemented in the ahci code.
    Refactor the code to use the libata variants and remove the dependency on
    ata.h. Convert some defines to use the version from libata.h. Also, remove
    some unnecessary memset's of bss data.
    
    This is a step toward hopefully merging ahci.c and dw_ahsata.c which are
    essentially the same driver.
    
    Signed-off-by: Rob Herring <rob.herring@calxeda.com>
    Reviewed-by: Tom Rini <trini@ti.com>
  8. ahci: increase spin-up timeout to 20 sec

    Rob Herring authored and trini committed Aug 24, 2013
    Based on Linux libata code, most drives are less than 10 sec, but some
    need up to 20 sec.
    
    Signed-off-by: Rob Herring <rob.herring@calxeda.com>
    Reviewed-by: Tom Rini <trini@ti.com>