Skip to content
Permalink
Branch: master
Find file Copy path
Find file Copy path
3 contributors

Users who have contributed to this file

@dasMulli @jeffkl @dotnet-bot
162 lines (130 sloc) 13.7 KB
<!--
***********************************************************************************************
Microsoft.Common.targets
WARNING: DO NOT MODIFY this file unless you are knowledgeable about MSBuild and have
created a backup copy. Incorrect changes to this file will make it
impossible to load or build your projects from the command-line or the IDE.
This file defines the steps in the standard build process for .NET projects. It
contains all the steps that are common among the different .NET languages, such as
Visual Basic, and Visual C#.
Copyright (C) Microsoft Corporation. All rights reserved.
***********************************************************************************************
-->
<Project DefaultTargets="Build" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
<!--
In VS 2010 SP1 and VS 2012, both supported for asset compatibility, the MSBuild installed
as part of them did not enforce using the local ToolsVersion (4.0) in all cases, but instead
just used whatever ToolsVersion was in the project file if it existed on the machine, and
only forced 4.0 if that ToolsVersion did not exist.
Moving forward, we do want to enforce a single acting ToolsVersion per version of Visual Studio,
but in order to approximate this behavior on VS 2010 SP1 and VS 2012 as well, we've redirected
the targets: If we're building using 4.X MSBuild (which doesn't define the new reserved
property, MSBuildAssemblyVersion), we'll point right back at the 4.0 targets, which still exist
as part of the .NET Framework. Only if we're using the new MSBuild will we point to the current
targets.
-->
<Choose>
<When Condition="'$(MSBuildAssemblyVersion)' == ''">
<PropertyGroup>
<CommonTargetsPath>$(MSBuildFrameworkToolsPath)\Microsoft.Common.targets</CommonTargetsPath>
</PropertyGroup>
</When>
<Otherwise>
<PropertyGroup>
<CommonTargetsPath>$(MSBuildToolsPath)\Microsoft.Common.CurrentVersion.targets</CommonTargetsPath>
</PropertyGroup>
</Otherwise>
</Choose>
<PropertyGroup Condition="'$(MSBuildAssemblyVersion)' == ''">
<!--
Overrides for the Microsoft.Common.targets extension targets. Used to make sure that only the imports we specify
(hard-coded to 4.0 locations) are used, not the 12.0 locations that would be used by default.
NOTE: This logic is duplicated in Microsoft.VisualBasic.targets and in Microsoft.CSharp.targets because those two files
import Microsoft.Common.targets from the current directory and thus don't get the benefit of the redirections, so for
any changes to this logic in this file, please also edit the other two.
-->
<ImportByWildcardBefore40MicrosoftCommonTargets Condition="'$(ImportByWildcardBefore40MicrosoftCommonTargets)' == ''">$(ImportByWildcardBeforeMicrosoftCommonTargets)</ImportByWildcardBefore40MicrosoftCommonTargets>
<ImportByWildcardBefore40MicrosoftCommonTargets Condition="'$(ImportByWildcardBefore40MicrosoftCommonTargets)' == ''">true</ImportByWildcardBefore40MicrosoftCommonTargets>
<ImportByWildcardAfter40MicrosoftCommonTargets Condition="'$(ImportByWildcardAfter40MicrosoftCommonTargets)' == ''">$(ImportByWildcardAfterMicrosoftCommonTargets)</ImportByWildcardAfter40MicrosoftCommonTargets>
<ImportByWildcardAfter40MicrosoftCommonTargets Condition="'$(ImportByWildcardAfter40MicrosoftCommonTargets)' == ''">true</ImportByWildcardAfter40MicrosoftCommonTargets>
<ImportUserLocationsByWildcardBefore40MicrosoftCommonTargets Condition="'$(ImportUserLocationsByWildcardBefore40MicrosoftCommonTargets)' == ''">$(ImportUserLocationsByWildcardBeforeMicrosoftCommonTargets)</ImportUserLocationsByWildcardBefore40MicrosoftCommonTargets>
<ImportUserLocationsByWildcardBefore40MicrosoftCommonTargets Condition="'$(ImportUserLocationsByWildcardBefore40MicrosoftCommonTargets)' == ''">true</ImportUserLocationsByWildcardBefore40MicrosoftCommonTargets>
<ImportUserLocationsByWildcardAfter40MicrosoftCommonTargets Condition="'$(ImportUserLocationsByWildcardAfter40MicrosoftCommonTargets)' == ''">$(ImportUserLocationsByWildcardAfterMicrosoftCommonTargets)</ImportUserLocationsByWildcardAfter40MicrosoftCommonTargets>
<ImportUserLocationsByWildcardAfter40MicrosoftCommonTargets Condition="'$(ImportUserLocationsByWildcardAfter40MicrosoftCommonTargets)' == ''">true</ImportUserLocationsByWildcardAfter40MicrosoftCommonTargets>
<ImportByWildcardBeforeMicrosoftCommonTargets>false</ImportByWildcardBeforeMicrosoftCommonTargets>
<ImportByWildcardAfterMicrosoftCommonTargets>false</ImportByWildcardAfterMicrosoftCommonTargets>
<ImportUserLocationsByWildcardBeforeMicrosoftCommonTargets>false</ImportUserLocationsByWildcardBeforeMicrosoftCommonTargets>
<ImportUserLocationsByWildcardAfterMicrosoftCommonTargets>false</ImportUserLocationsByWildcardAfterMicrosoftCommonTargets>
<CustomBeforeMicrosoftCommonTargets Condition="'$(CustomBeforeMicrosoftCommonTargets)' == ''">$(MSBuildExtensionsPath)\v4.0\Custom.Before.Microsoft.Common.targets</CustomBeforeMicrosoftCommonTargets>
<CustomAfterMicrosoftCommonTargets Condition="'$(CustomAfterMicrosoftCommonTargets)' == ''">$(MSBuildExtensionsPath)\v4.0\Custom.After.Microsoft.Common.targets</CustomAfterMicrosoftCommonTargets>
</PropertyGroup>
<PropertyGroup Condition="'$(MSBuildAssemblyVersion)' == '' and ('$(TargetFrameworkIdentifier)' == '.NETFramework' or '$(TargetFrameworkIdentifier)' == 'Silverlight' or ('$(TargetFrameworkIdentifier)' == '' and ('$(TargetRuntime)' == 'Managed' or '$(TargetRuntime)' == '')))">
<!--
Overrides for the Microsoft.NETFramework.props extension targets. Used to make sure that only the imports we specify
(hard-coded to 4.0 locations) are used, not the 12.0 locations that would be used by default. Required because
Microsoft.Common.targets imports it from the current directory, so we don't get a chance to redirect these in its
own redirection targets.
NOTE: This logic is duplicated in Microsoft.VisualBasic.targets and in Microsoft.CSharp.targets because those two files
import Microsoft.Common.targets from the current directory and thus don't get the benefit of these redirections either,
so for any changes to this logic in this file, please also edit the other two.
-->
<ImportByWildcardBefore40MicrosoftNetFrameworkProps Condition="'$(ImportByWildcardBefore40MicrosoftNetFrameworkProps)' == ''">$(ImportByWildcardBeforeMicrosoftNetFrameworkProps)</ImportByWildcardBefore40MicrosoftNetFrameworkProps>
<ImportByWildcardBefore40MicrosoftNetFrameworkProps Condition="'$(ImportByWildcardBefore40MicrosoftNetFrameworkProps)' == ''">true</ImportByWildcardBefore40MicrosoftNetFrameworkProps>
<ImportByWildcardAfter40MicrosoftNetFrameworkProps Condition="'$(ImportByWildcardAfter40MicrosoftNetFrameworkProps)' == ''">$(ImportByWildcardAfterMicrosoftNetFrameworkProps)</ImportByWildcardAfter40MicrosoftNetFrameworkProps>
<ImportByWildcardAfter40MicrosoftNetFrameworkProps Condition="'$(ImportByWildcardAfter40MicrosoftNetFrameworkProps)' == ''">true</ImportByWildcardAfter40MicrosoftNetFrameworkProps>
<ImportUserLocationsByWildcardBefore40MicrosoftNetFrameworkProps Condition="'$(ImportUserLocationsByWildcardBefore40MicrosoftNetFrameworkProps)' == ''">$(ImportUserLocationsByWildcardBeforeMicrosoftNetFrameworkProps)</ImportUserLocationsByWildcardBefore40MicrosoftNetFrameworkProps>
<ImportUserLocationsByWildcardBefore40MicrosoftNetFrameworkProps Condition="'$(ImportUserLocationsByWildcardBefore40MicrosoftNetFrameworkProps)' == ''">true</ImportUserLocationsByWildcardBefore40MicrosoftNetFrameworkProps>
<ImportUserLocationsByWildcardAfter40MicrosoftNetFrameworkProps Condition="'$(ImportUserLocationsByWildcardAfter40MicrosoftNetFrameworkProps)' == ''">$(ImportUserLocationsByWildcardAfterMicrosoftNetFrameworkProps)</ImportUserLocationsByWildcardAfter40MicrosoftNetFrameworkProps>
<ImportUserLocationsByWildcardAfter40MicrosoftNetFrameworkProps Condition="'$(ImportUserLocationsByWildcardAfter40MicrosoftNetFrameworkProps)' == ''">true</ImportUserLocationsByWildcardAfter40MicrosoftNetFrameworkProps>
<ImportByWildcardBeforeMicrosoftNetFrameworkProps>false</ImportByWildcardBeforeMicrosoftNetFrameworkProps>
<ImportByWildcardAfterMicrosoftNetFrameworkProps>false</ImportByWildcardAfterMicrosoftNetFrameworkProps>
<ImportUserLocationsByWildcardBeforeMicrosoftNetFrameworkProps>false</ImportUserLocationsByWildcardBeforeMicrosoftNetFrameworkProps>
<ImportUserLocationsByWildcardAfterMicrosoftNetFrameworkProps>false</ImportUserLocationsByWildcardAfterMicrosoftNetFrameworkProps>
</PropertyGroup>
<ImportGroup Condition="'$(MSBuildAssemblyVersion)' == ''">
<Import Project="$(MSBuildUserExtensionsPath)\4.0\Microsoft.Common.targets\ImportBefore\*" Condition="'$(ImportUserLocationsByWildcardBefore40MicrosoftCommonTargets)' == 'true' and exists('$(MSBuildUserExtensionsPath)\4.0\Microsoft.Common.targets\ImportBefore')"/>
<Import Project="$(MSBuildExtensionsPath)\4.0\Microsoft.Common.targets\ImportBefore\*" Condition="'$(ImportByWildcardBefore40MicrosoftCommonTargets)' == 'true' and exists('$(MSBuildExtensionsPath)\4.0\Microsoft.Common.targets\ImportBefore')"/>
</ImportGroup>
<ImportGroup Condition="'$(MSBuildAssemblyVersion)' == ''">
<Import Project="$(MSBuildUserExtensionsPath)\4.0\Microsoft.NETFramework.props\ImportBefore\*" Condition="'$(ImportUserLocationsByWildcardBefore40MicrosoftNetFrameworkProps)' == 'true' and exists('$(MSBuildUserExtensionsPath)\4.0\Microsoft.NETFramework.props\ImportBefore')"/>
<Import Project="$(MSBuildExtensionsPath)\4.0\Microsoft.NETFramework.props\ImportBefore\*" Condition="'$(ImportByWildcardBefore40MicrosoftNetFrameworkProps)' == 'true' and exists('$(MSBuildExtensionsPath)\4.0\Microsoft.NETFramework.props\ImportBefore')"/>
</ImportGroup>
<Import Project="$(CommonTargetsPath)" />
<!--
Prepare to import project extensions which usually come from packages. Package management systems will create a file at:
$(MSBuildProjectExtensionsPath)\$(MSBuildProjectFile).<SomethingUnique>.targets
Each package management system should use a unique moniker to avoid collisions. It is a wild-card import so the package
management system can write out multiple files but the order of the import is alphabetic because MSBuild sorts the list.
-->
<PropertyGroup>
<ImportProjectExtensionTargets Condition="'$(ImportProjectExtensionTargets)' == ''">true</ImportProjectExtensionTargets>
</PropertyGroup>
<Import Project="$(MSBuildProjectExtensionsPath)$(MSBuildProjectFile).*.targets" Condition="'$(ImportProjectExtensionTargets)' == 'true' and exists('$(MSBuildProjectExtensionsPath)')" />
<PropertyGroup>
<ImportDirectoryBuildTargets Condition="'$(ImportDirectoryBuildTargets)' == ''">true</ImportDirectoryBuildTargets>
</PropertyGroup>
<!--
Determine the path to the directory build targets file if the user did not disable $(ImportDirectoryBuildTargets) and
they did not already specify an absolute path to use via $(DirectoryBuildTargetsPath)
-->
<PropertyGroup Condition="'$(ImportDirectoryBuildTargets)' == 'true' and '$(DirectoryBuildTargetsPath)' == ''">
<_DirectoryBuildTargetsFile Condition="'$(_DirectoryBuildTargetsFile)' == ''">Directory.Build.targets</_DirectoryBuildTargetsFile>
<_DirectoryBuildTargetsBasePath Condition="'$(_DirectoryBuildTargetsBasePath)' == ''">$([MSBuild]::GetDirectoryNameOfFileAbove($(MSBuildProjectDirectory), '$(_DirectoryBuildTargetsFile)'))</_DirectoryBuildTargetsBasePath>
<DirectoryBuildTargetsPath Condition="'$(_DirectoryBuildTargetsBasePath)' != '' and '$(_DirectoryBuildTargetsFile)' != ''">$([System.IO.Path]::Combine('$(_DirectoryBuildTargetsBasePath)', '$(_DirectoryBuildTargetsFile)'))</DirectoryBuildTargetsPath>
</PropertyGroup>
<Import Project="$(DirectoryBuildTargetsPath)" Condition="'$(ImportDirectoryBuildTargets)' == 'true' and exists('$(DirectoryBuildTargetsPath)')"/>
<ImportGroup Condition="'$(MSBuildAssemblyVersion)' == ''">
<Import Project="$(MSBuildExtensionsPath)\4.0\Microsoft.NETFramework.props\ImportAfter\*" Condition="'$(ImportByWildcardAfter40MicrosoftNetFrameworkProps)' == 'true' and exists('$(MSBuildExtensionsPath)\4.0\Microsoft.NETFramework.props\ImportAfter')"/>
<Import Project="$(MSBuildUserExtensionsPath)\4.0\Microsoft.NETFramework.props\ImportAfter\*" Condition="'$(ImportUserLocationsByWildcardAfter40MicrosoftNetFrameworkProps)' == 'true' and exists('$(MSBuildUserExtensionsPath)\4.0\Microsoft.NETFramework.props\ImportAfter')"/>
</ImportGroup>
<ImportGroup Condition="'$(MSBuildAssemblyVersion)' == ''">
<Import Project="$(MSBuildExtensionsPath)\4.0\Microsoft.Common.targets\ImportAfter\*" Condition="'$(ImportByWildcardAfter40MicrosoftCommonTargets)' == 'true' and exists('$(MSBuildExtensionsPath)\4.0\Microsoft.Common.targets\ImportAfter')"/>
<Import Project="$(MSBuildUserExtensionsPath)\4.0\Microsoft.Common.targets\ImportAfter\*" Condition="'$(ImportUserLocationsByWildcardAfter40MicrosoftCommonTargets)' == 'true' and exists('$(MSBuildUserExtensionsPath)\4.0\Microsoft.Common.targets\ImportAfter')"/>
</ImportGroup>
<!-- Fix up FrameworkPathOverride, which is primarily used to determine the location of mscorlib.dll in the
(relatively uncommon) situation where the reference assemblies, in which it's usually found, are not
installed. -->
<PropertyGroup Condition="'$(MSBuildAssemblyVersion)' == ''">
<FrameworkPathOverride Condition="!Exists('$(FrameworkPathOverride)\mscorlib.dll')">$(MSBuildFrameworkToolsPath)</FrameworkPathOverride>
</PropertyGroup>
</Project>
You can’t perform that action at this time.