Lab 1.3 - number issues?

[tylerfarmer1]

Lab/Demo: 1.3 - Import Solution

Exercise 1 - Import Fabrikam Solutions

Task: 1.1 - Main Solution

I'm not sure if this is a GitHub issue or the Lab Hoster issue. It is referring to the Step Numbers.

In Task 1.1 there are 20 steps. When I look at the instructions using this URL, it shows all 20 steps numbered correctly:
https://microsoftlearning.github.io/PL-200-Power-Platform-Functional-Consultant/Instructions/Labs/LAB%5BPL-200%5D_M01L03_ImportSolution.html

In the Lab Hoster, it shows Steps 1-5. Then there is a "note" and an "image"...and right after the image it starts with Step 1 again instead of Step 6.

Then at Step 12 (which is should be step 17), there is another picture, and the Steps start numbering at 1 again (which should be Step 18).

See 2 attached pictures for exampls.

I see this is several Labs/Exercises; I can document them here when I see them if you'd like...but again, I don't know if this is GitHub / Markdown issue, or if it's on the lab hoster side.

[julians1966]

The markdown in the lab files is correct, but I have seen this before in the lab environments and may need to adjust the indentation of the images for them to appear correctly.
I have checked the other lab providers to see if they have the same issue but none of them have yet updated their labs.

[chandlersyal]

@tylerfarmer1 I have reached out to Skillable to see how we can get this fixed. Thank you for raising!

[julians1966]

@tylerfarmer1 @chandlersyal Godeploy have updated their lab environment over the weekend and the images and numbering appear correctly

So this is an issue for Skillable

[julians1966]

See also this which is correctly numbered

[tylerfarmer1]

Thanks, I will raise a ticket with them, I'm teaching this course this week. Tyler Farmer ***@***.******@***.***> 602-326-1042 From: Julian Sharp ***@***.***> Sent: Monday, January 22, 2024 2:33 AM To: MicrosoftLearning/PL-200-Power-Platform-Functional-Consultant ***@***.***> Cc: Tyler Farmer ***@***.***>; Mention ***@***.***> Subject: Re: [MicrosoftLearning/PL-200-Power-Platform-Functional-Consultant] Lab 1.3 - number issues? (Issue #221) @tylerfarmer1<https://github.com/tylerfarmer1> @chandlersyal<https://github.com/chandlersyal> Godeploy have updated their lab environment over the weekend and the images and numbering appear correctly image.png (view on web)<https://github.com/MicrosoftLearning/PL-200-Power-Platform-Functional-Consultant/assets/29278645/1fe9dd1f-4333-476a-8598-5aaf8de72726> So this is an issue for Skillable - Reply to this email directly, view it on GitHub<#221 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/ARKV4GTCD7TCSDLH7QONRMDYPYW5BAVCNFSM6AAAAABCDG6HJCVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSMBTGU4TCMRTGM>. You are receiving this because you were mentioned.Message ID: ***@***.******@***.***>>

[chandlersyal]

Merged the above PR that resolves this issue. Thanks!