Skip to content

Източник на данни за КЗ

Radoslav Radev edited this page Sep 17, 2017 · 1 revision

За потребители на Dexcom:
Ако вие използвате xdrip…

  • Ако все още нямате приложението xdrip изтеглете xdrip и следвайте инструкиите за nightscout (G4 without share, G4 share, G5).
  • В xdrip отворете Settings > Interapp Compatibility > Broadcast Data Locally и изберете ON.
  • В xdrip отворете Settings > Interapp Compatibility > Accept Treatments и изберете OFF.
  • Ако вие искате да може да използвате AndroidAPS за калибриране в xdrip отворете Settings > Interapp Compatibility > Accept Calibrations и изберете ON. You may also want to review the options in Settings > Less Common Settings > Advanced Calibration Settings.
  • Изберете xdrip в Конфигурация в AndroidAPS.

Ако вие използвате OTG кабел за Nightscout

  • If not already set up then download Nightscout Uploader app from the Play Store and follow instructions on Nightscout.
  • In AndroidAPS Preferences enter your nightscout website and API secret.
  • Select NSClient in ConfigBuilder (setting in AndroidAPS).

For users of Libre:

If using xdrip...

  • If not already set up then download xdrip and follow instructions on LimiTTEer, Libre Alarm or BlueReader(Hardware).
  • In xdrip go to Settings > Interapp Compatibility > Broadcast Data Locally and select ON.
  • In xdrip go to Settings > Interapp Compatibility > Accept Treatments and select OFF.
  • If you want to be able to use AndroidAPS to calibrate then in xdrip go to Settings > Interapp Compatibility > Accept Calibrations and select ON. You may also want to review the options in Settings > Less Common Settings > Advanced Calibration Settings.
  • Select xdrip in ConfigBuilder (setting in AndroidAPS).

If using Glimp...

  • If not already set up then download Glimp and follow instructions on nightscout.
  • Select Glimp in ConfigBuilder (setting in AndroidAPS).

For users of MM640g or MM630g:

  • If not already set up then download 600SeriesAndroidUploaer and follow instructions on nightscout.
  • In 600 Series Uploader go to Settings > Send to xdrip+ and select ON (tick).
  • Select MM640g in ConfigBuilder (setting in AndroidAPS).

For users of other CGM uploaded to nightscout:
If you have any other CGM set up that sends your data to Nightscout then

  • In AndroidAPS Preferences enter your nightscout website and API secret.
  • Select NSClient in ConfigBuilder (setting in AndroidAPS).

Getting Started:

How to install AndroidAPS:

Configuration:

Usage:

Sources:

CZ:

DE:

Български:

Въведение:

Инсталиране:

Конфигуриране:

Използване:

Източници:

Примери:

Подкрепа:

한국어:

Clone this wiki locally
You can’t perform that action at this time.