Skip to content

MonsoonFinance/Binance-Cash-Core

Repository files navigation

Binance Cash Privacy Solution Build Status

Binance Cash is a non-custodial Ethereum and ERC20 privacy solution based on zkSNARKs for Binance Smart Chain. It is a fork of Tornado Cash, a mixer and privacy solution for Ethereum. It improves transaction privacy by breaking the on-chain link between the recipient and destination addresses. It uses a smart contract that accepts ETH deposits that can be withdrawn by a different address. Whenever ETH is withdrawn by the new address, there is no way to link the withdrawal to the deposit, ensuring complete privacy.

To make a deposit user generates a secret and sends its hash (called a commitment) along with the deposit amount to the Tornado smart contract. The contract accepts the deposit and adds the commitment to its list of deposits.

Later, the user decides to make a withdrawal. To do that, the user should provide a proof that he or she possesses a secret to an unspent commitment from the smart contract’s list of deposits. zkSnark technology allows that to happen without revealing which exact deposit corresponds to this secret. The smart contract will check the proof, and transfer deposited funds to the address specified for withdrawal. An external observer will be unable to determine which deposit this withdrawal came from. There is a 1% fee for using the protocol, taken at the time of withdrawal. This fee does not reduce anonymity in any way, and can only be increased up to a maximum of 5%. In the future, this fee can be used to buy and burn tokens from Pancakeswap (or any other AMM DEX).

You can read more about it in this medium article

Specs

  • Deposit gas cost: 1088354 (43381 + 50859 * tree_depth)
  • Withdraw gas cost: 301233
  • Circuit Constraints = 28271 (1869 + 1325 * tree_depth)
  • Circuit Proof time = 10213ms (1071 + 347 * tree_depth)
  • Serverless

image

Tornado.cash Whitepaper

TornadoCash_whitepaper_v1.4.pdf

Was it audited?

Tornado.cash protocols, circuits, and smart contracts were audited by a group of experts from ABDK Consulting, specializing in zero-knowledge, cryptography, and smart contracts.

During the audit, no critical issues were found and all outstanding issues were fixed. The results can be found here:

Underlying circomlib dependency is currently being audited, and the team already published most of the fixes for found issues

Requirements

  1. node v11.15.0
  2. npm install -g npx

Usage

You can see example usage in cli.js, it works both in the console and in the browser.

  1. npm install
  2. cp .env.example .env
  3. npm run build - this may take 10 minutes or more
  4. npx ganache-cli
  5. npm run test - optionally runs tests. It may fail on the first try, just run it again.

Use browser version on Kovan:

  1. vi .env - add your Kovan private key to deploy contracts
  2. npm run migrate
  3. npx http-server - serve current dir, you can use any other static http server
  4. Open localhost:8080

Use the command-line version. Works for Ganache, Kovan, and Mainnet:

Initialization

  1. cp .env.example .env
  2. npm run download
  3. npm run build:contract

Ganache

  1. make sure you complete steps from Initialization
  2. ganache-cli -i 1337
  3. npm run migrate:dev
  4. ./cli.js test
  5. ./cli.js --help

Kovan, Mainnet

  1. Please use https://github.com/tornadocash/tornado-cli Reason: because tornado-core uses websnark 2041cfa5fa0b71cd5cca9022a4eeea4afe28c9f7 commit hash in order to work with local trusted setup. Tornado-cli uses 4c0af6a8b65aabea3c09f377f63c44e7a58afa6d commit with production trusted setup of tornadoCash

Example:

./cli.js deposit ETH 0.1 --rpc https://kovan.infura.io/v3/27a9649f826b4e31a83e07ae09a87448

Your note: tornado-eth-0.1-42-0xf73dd6833ccbcc046c44228c8e2aa312bf49e08389dadc7c65e6a73239867b7ef49c705c4db227e2fadd8489a494b6880bdcb6016047e019d1abec1c7652 Tornado ETH balance is 8.9 Sender account ETH balance is 1004873.470619891361352542 Submitting deposit transaction Tornado ETH balance is 9 Sender account ETH balance is 1004873.361652048361352542

./cli.js withdraw tornado-eth-0.1-42-0xf73dd6833ccbcc046c44228c8e2aa312bf49e08389dadc7c65e6a73239867b7ef49c705c4db227e2fadd8489a494b6880bdcb6016047e019d1abec1c7652 0x8589427373D6D84E98730D7795D8f6f8731FDA16 --rpc https://kovan.infura.io/v3/27a9649f826b4e31a83e07ae09a87448 --relayer https://kovan-frelay.duckdns.org

Relay address: 0x6A31736e7490AbE5D5676be059DFf064AB4aC754 Getting current state from tornado contract Generating SNARK proof Proof time: 9117.051ms Sending withdraw transaction through the relay Transaction submitted through the relay. View transaction on etherscan https://kovan.etherscan.io/tx/0xcb21ae8cad723818c6bc7273e83e00c8393fcdbe74802ce5d562acad691a2a7b Transaction mined in block 17036120 Done

Deploy ETH Tornado Cash

  1. cp .env.example .env
  2. Tune all necessary params
  3. npx truffle migrate --network kovan --reset --f 2 --to 4

Deploy ERC20 Tornado Cash

  1. cp .env.example .env
  2. Tune all necessary params
  3. npx truffle migrate --network kovan --reset --f 2 --to 3
  4. npx truffle migrate --network kovan --reset --f 5

Note. If you want to reuse the same verifier for all the instances, then after you deployed one of the instances you should only run the 4th or 5th migration for ETH or ERC20 contracts respectively (--f 4 --to 4 or --f 5).

How to resolve ENS name to DNS name for a relayer

  1. Visit https://etherscan.io/enslookup and put relayer ENS name to the form.
  2. Copy the namehash (1) and click on the Resolver link (2) enslookup
  3. Go to the Contract tab. Click on Read Contract and scroll down to the 5. text method.
  4. Put the values: resolver
  5. Click Query and you will get the DNS name. Just add https:// to it and use it as relayer url

Credits

Special thanks to @barryWhiteHat and @kobigurk for valuable input, and @jbaylina for awesome Circom & Websnark framework

Minimal demo example

  1. npm i
  2. ganache-cli -d
  3. npm run download
  4. npm run build:contract
  5. cp .env.example .env
  6. npm run migrate:dev
  7. node minimal-demo.js

Emulate MPC trusted setup ceremony

cargo install zkutil
npx circom circuits/withdraw.circom -o build/circuits/withdraw.json
zkutil setup -c build/circuits/withdraw.json -p build/circuits/withdraw.params
zkutil export-keys -c build/circuits/withdraw.json -p build/circuits/withdraw.params -r build/circuits/withdraw_proving_key.json -v build/circuits/withdraw_verification_key.json
zkutil generate-verifier -p build/circuits/withdraw.params -v build/circuits/Verifier.sol
sed -i -e 's/pragma solidity \^0.6.0/pragma solidity 0.5.17/g' ./build/circuits/Verifier.sol

About

Binance Cash core smart contracts

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published