Firmware v3.12.6

PLEASE READ

BEFORE UPDATING…

1. If updating from an earlier firmware version (i.e. v3.11), back up your controller before updating (you can always revert the firmware back). Preset and bank data will be retained but currently, controller settings data will be reset.

AFTER UPDATING…

1. Re-calibrate expression pedal
2. Check new features in Controller Settings >> General Config (default MIDI clock ports)
3. Check new features in Controller Settings >> MIDI Channel (MIDI channel ports and channel remap)

v3.12.6 Update

Bug Fixes

• Fix bug in Resistor ladder aux switch after optimisation

v3.12.5 Update

Bug Fixes

• Fix MIDI Clock port select bug
• Fix bug in Resistor ladder aux switch after optimisation

v3.12.4 Update

Bug Fixes

• Fix Tap Tempo bug in MIDI Clock menu
• Re-enable jump to same bank
• Remove engage preset limit when running in sequence
• Fix MIDI clock port select new feature initialisation

v3.12.3 Update

Bug Fixes

• Fix jump to last bank issue
• Fix load last used bank on startup

v3.12.2 Update

Bug Fixes

• Fix external MIDI Tap bug
• Fix PC bank recall when in custom bank arrangement bug
• Fix resistor ladder bug

Changes

• Removed MIDI Clock and CC Waveform timeout feature when in editor mode

v3.12.1 Update

New Features

• Add Bank jump for TRS aux switch
• Page Toggle message type for Bank Presets

• Feature to remap MIDI channels in MIDI Channel setting (under Controller Settings >> MIDI Channel settings)
• Feature to Select default output port for each MIDI channel (under Controller Settings >> MIDI Channel settings)
• Add omniport setting for Resistor Ladder aux switch (max 8 switches)
• Controller settings: Define which ports to send MIDI clock to
• Allow Omniport to use a Rheostat style expression pedal (defined in Exp calibration)
• Add serial port communication with editor
• MIDI CC implementation to trigger LCD display alert for user to test MIDI Input

Enhancements

• Add ML10X message type to Bank Presets

• Add MIDI communication timeout when controller is communicating with the editor. Persistent MIDI from Clock or CC (waveform etc) affects SysEx comms
• Reset MIDI clock tap tempo average number of taps after 5 second timeout
• Improved expression calibration
• Improved sensitivity handling for Expression
• When screensaver is ON, the next switch press should not trigger any function

Bug Fixes

• REGRESSION Fixed aux switch T+R Bug
• Fixed MIDI Output start up initialisation bug
• [BUG] Fractal Integration should use Fractal MIDI channel. Currently, it is using the MC's MIDI channel.
• [BUG] Sequencer invert function should start from beginning. Currently, it starts from where it left off.
• [BUG] Double Tap Release is not triggered by Release All
• Exp issue where value might jump from 0% to 100% when exp is set to heel down below lower limit threshold

• MIDI Clock decimal places not working for Bank Presets

• Double tap action executing when press action is held down slightly longer
• Double tap release engaging randomly when only Release is triggered
• PC Scroll doesn't work when max value is set to 1 or 2
• Controller sequencer not sending missing last value if length is set to 16
• Controller needs to be restarted after saving new Sequencer values in order for new values to load
• When using custom Bank arrangement, selected bank from engage preset message type or bank jump should point to default bank arrangement.
• Fix long double tap action
• Data backup bug
• Page refresh issue which causes users to scroll past intended bank when scrolling through banks by holding down switches
• MIDI messages sent is delayed when MIDI clock messages are being received
• Waveform Generator 3 - max value bug
• Only MIDI clock should trigger BPM calculation. Currently, any MIDI real time message will
• Fix data communication issue when creating backup, resulting in missing preset data