Firmware v1.2.0 (BETA)

PLEASE READ

In the new batch which we started selling from Sept 2023 (the enclosure has a marking showing rev b and the USB C port is horizontal instead of vertical), it uses a different processor which requires a different firmware, which we will suffix with rev-b.

IMPORTANT, READ BEFORE UPDATING

When updating to the new v1.2 firmware, you will need to set your connector names under Connector Settings again, as they will be offset after the update if you are updating from firmware v1.1.

Please use the Beta Editor with this firmware
https://editor-beta.morningstar.io/ml10x

Info

• CC Implementation
  • CC#30 A Tip
    • Value 64: Toggle Output Cut
    • Value 0: Restore Output
    • Value 127: Cut Output
  • CC#31: A Ring
  • CC#32: B Tip
  • CC#33: B Ring
  • CC#34: C Tip
  • CC#35: C Ring
  • CC#36: D Tip
  • CC#37: D Ring
  • CC#38: E Tip
  • CC#39: E Ring
  • CC#40: Input Tip Bypass/Engage
  • CC#41: Input Ring Bypass/Engage
  • CC#42: Output Tip Bypass/Engage
  • CC#43: Output Ring Bypass/Engage

Bug Fixes

• 2025-11-24 First preset loaded on bootup should load loop bypass states even if Loop Bypass Persist is turned ON
• 2025-10-16 Fixed sensitive buttons
• 2025-02-07 Fix bug in Advanced mode
• 2026-03-27 Fixed bug when using last connected as trails
• 2026-03-27 Fixed bug when using ML10X message type on revA model

New Features

• 2025-11-24 Add Reload Current Preset Loops (CC#51)

• 2025-01-10 Added copy and paste editor functions

• 2024-12-10 Allow bypass/engage for Input and Output

  • CC#40 Engage/bypass input tip. Value 64 for toggle
  • CC#41 Engage/bypass input ring. Value 64 for toggle
  • CC#42 Engage/bypass output tip. Value 64 for toggle
  • CC#43 Engage/bypass output ring. Value 64 for toggle

• 2024-12-06 Allow bypassing of loops when preset is loaded in Advanced Mode

• 2024-12-06 Allow trails in advanced mode

• 2024-11-22 Add Loop Bypass Persist function. If enabled, this will persist each of the loop bypass state across preset changes.

• 2024-11-22 Add Input Ring split feature. If enabled, the Input Tip signal will be split to Input Tip and Ring. Input Ring signals will be ignored.

• 2024-11-22 Add Bypass/Engage for Advanced mode

• 2024-11-22 Add rename feature for Inputs and Outputs

• 2024-11-22 Add rename feature for each send and return port

Firmware v1.1.2

PLEASE READ

In the new batch which we started selling from Sept 2023 (the enclosure has a marking showing rev b and the USB C port is horizontal instead of vertical), it uses a different processor which requires a different firmware, which we will suffix with rev-b.

Bug Fixes

• Display did not update when toggling loops via CC/ML10X message
• Fixed display orientation bug

Firmware v1.1.1

Initial release