Skip to content
Permalink
Branch: master
Find file Copy path
Find file Copy path
2 contributors

Users who have contributed to this file

@oskooi @ChristopherHogan
110 lines (85 sloc) 3.62 KB
# -*- coding: utf-8 -*-
import meep as mp
import math
import numpy as np
import matplotlib.pyplot as plt
resolution = 60 # pixels/μm
dpml = 1.0 # PML thickness
dsub = 3.0 # substrate thickness
dpad = 3.0 # padding between grating and PML
gp = 10.0 # grating period
gh = 0.5 # grating height
gdc = 0.5 # grating duty cycle
sx = dpml+dsub+gh+dpad+dpml
sy = gp
cell_size = mp.Vector3(sx,sy,0)
pml_layers = [mp.PML(thickness=dpml,direction=mp.X)]
wvl_min = 0.4 # min wavelength
wvl_max = 0.6 # max wavelength
fmin = 1/wvl_max # min frequency
fmax = 1/wvl_min # max frequency
fcen = 0.5*(fmin+fmax) # center frequency
df = fmax-fmin # frequency width
src_pt = mp.Vector3(-0.5*sx+dpml+0.5*dsub,0,0)
sources = [mp.Source(mp.GaussianSource(fcen, fwidth=df), component=mp.Ez, center=src_pt, size=mp.Vector3(0,sy,0))]
k_point = mp.Vector3(0,0,0)
glass = mp.Medium(index=1.5)
symmetries=[mp.Mirror(mp.Y)]
sim = mp.Simulation(resolution=resolution,
cell_size=cell_size,
boundary_layers=pml_layers,
k_point=k_point,
default_material=glass,
sources=sources,
symmetries=symmetries)
nfreq = 21
mon_pt = mp.Vector3(0.5*sx-dpml-0.5*dpad,0,0)
flux_mon = sim.add_flux(fcen, df, nfreq, mp.FluxRegion(center=mon_pt, size=mp.Vector3(0,sy,0)))
sim.run(until_after_sources=mp.stop_when_fields_decayed(50, mp.Ez, mon_pt, 1e-9))
input_flux = mp.get_fluxes(flux_mon)
sim.reset_meep()
geometry = [mp.Block(material=glass, size=mp.Vector3(dpml+dsub,mp.inf,mp.inf), center=mp.Vector3(-0.5*sx+0.5*(dpml+dsub),0,0)),
mp.Block(material=glass, size=mp.Vector3(gh,gdc*gp,mp.inf), center=mp.Vector3(-0.5*sx+dpml+dsub+0.5*gh,0,0))]
sim = mp.Simulation(resolution=resolution,
cell_size=cell_size,
boundary_layers=pml_layers,
geometry=geometry,
k_point=k_point,
sources=sources,
symmetries=symmetries)
mode_mon = sim.add_flux(fcen, df, nfreq, mp.FluxRegion(center=mon_pt, size=mp.Vector3(0,sy,0)))
sim.run(until_after_sources=mp.stop_when_fields_decayed(50, mp.Ez, mon_pt, 1e-9))
freqs = mp.get_eigenmode_freqs(mode_mon)
nmode = 10
res = sim.get_eigenmode_coefficients(mode_mon, range(1,nmode+1), eig_parity=mp.ODD_Z+mp.EVEN_Y)
coeffs = res.alpha
kdom = res.kdom
mode_wvl = []
mode_angle = []
mode_tran = []
for nm in range(nmode):
for nf in range(nfreq):
mode_wvl.append(1/freqs[nf])
mode_angle.append(math.degrees(math.acos(kdom[nm*nfreq+nf].x/freqs[nf])))
tran = abs(coeffs[nm,nf,0])**2/input_flux[nf]
mode_tran.append(0.5*tran if nm != 0 else tran)
print("grating{}:, {:.5f}, {:.2f}, {:.8f}".format(nm,mode_wvl[-1],mode_angle[-1],mode_tran[-1]))
tran_max = round(max(mode_tran),1)
plt.figure()
plt.pcolormesh(np.reshape(mode_wvl,(nmode,nfreq)),
np.reshape(mode_angle,(nmode,nfreq)),
np.reshape(mode_tran,(nmode,nfreq)),
cmap='Blues',
shading='flat',
vmin=0,
vmax=tran_max)
plt.axis([min(mode_wvl), max(mode_wvl), min(mode_angle), max(mode_angle)])
plt.xlabel("wavelength (μm)")
plt.ylabel("diffraction angle (degrees)")
plt.xticks([t for t in np.arange(0.4,0.7,0.1)])
plt.yticks([t for t in range(0,35,5)])
plt.title("transmittance of diffraction orders")
cbar = plt.colorbar()
cbar.set_ticks([t for t in np.arange(0,tran_max+0.1,0.1)])
cbar.set_ticklabels(["{:.1f}".format(t) for t in np.arange(0,tran_max+0.1,0.1)])
plt.show()
You can’t perform that action at this time.