Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

stage-1: modprobe ext{2,3,4} before resizing (so resizing takes less than 45 minutes) #102171

Merged
merged 1 commit into from Oct 30, 2020

Conversation

@grahamc
Copy link
Member

@grahamc grahamc commented Oct 30, 2020

Motivation for this change

I noticed booting a system with an ext4 root which expanded to 5T took
quite a long time (12 minutes in some cases, 43(!) in others.)

I changed stage-1 to run resize2fs -d 62 for extra debug output and
timing information. It revealed the adjust_superblock step taking
almost all of the time:

[Fri Oct 30 11:10:15 UTC 2020] zero_high_bits_in_metadata: Memory used: 132k/0k (63k/70k), time:  0.00/ 0.00/ 0.00
[Fri Oct 30 11:21:09 UTC 2020] adjust_superblock: Memory used: 396k/4556k (295k/102k), time: 654.21/ 0.59/ 5.13

but when I ran resize2fs on a disk with the identical content growing
to the identical target size, it would only take about 30 seconds. I
looked at what happened between those two steps in the fast case with
strace and found:

   235	getrusage(RUSAGE_SELF, {ru_utime={tv_sec=0, tv_usec=1795}, ru_stime={tv_sec=0, tv_usec=3590}, ...}) = 0
   236	write(1, "zero_high_bits_in_metadata: Memo"..., 84zero_high_bits_in_metadata: Memory used: 132k/0k (72k/61k), time:  0.00/ 0.00/ 0.00
   237	) = 84
   238	gettimeofday({tv_sec=1604061278, tv_usec=480147}, NULL) = 0
   239	getrusage(RUSAGE_SELF, {ru_utime={tv_sec=0, tv_usec=1802}, ru_stime={tv_sec=0, tv_usec=3603}, ...}) = 0
   240	gettimeofday({tv_sec=1604061278, tv_usec=480192}, NULL) = 0
   241	mmap(NULL, 2564096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fa3c7355000
   242	access("/sys/fs/ext4/features/lazy_itable_init", F_OK) = 0
   243	brk(0xf85000)                           = 0xf85000
   244	brk(0xfa6000)                           = 0xfa6000
   245	gettimeofday({tv_sec=1604061278, tv_usec=538828}, NULL) = 0
   246	getrusage(RUSAGE_SELF, {ru_utime={tv_sec=0, tv_usec=58720}, ru_stime={tv_sec=0, tv_usec=3603}, ...}) = 0
   247	write(1, "adjust_superblock: Memory used: "..., 79adjust_superblock: Memory used: 396k/2504k (305k/92k), time:  0.06/ 0.06/ 0.00
   248	) = 79
   249	gettimeofday({tv_sec=1604061278, tv_usec=539119}, NULL) = 0
   250	getrusage(RUSAGE_SELF, {ru_utime={tv_sec=0, tv_usec=58812}, ru_stime={tv_sec=0, tv_usec=3603}, ...}) = 0
   251	gettimeofday({tv_sec=1604061279, tv_usec=939}, NULL) = 0
   252	getrusage(RUSAGE_SELF, {ru_utime={tv_sec=0, tv_usec=520411}, ru_stime={tv_sec=0, tv_usec=3603}, ...}) = 0
   253	write(1, "fix_uninit_block_bitmaps 2: Memo"..., 88fix_uninit_block_bitmaps 2: Memory used: 396k/2504k (305k/92k), time:  0.46/ 0.46/ 0.00
   254	) = 88

In particular the access to /sys/fs seemed interesting. Looking
at the source of resize2fs:

[root@ip-172-31-22-182:~/e2fsprogs-1.45.5]# rg -B2 -A1 /sys/fs/ext4/features/lazy_itable_init .
./resize/resize2fs.c
923-	if (getenv("RESIZE2FS_FORCE_LAZY_ITABLE_INIT") ||
924-	    (!getenv("RESIZE2FS_FORCE_ITABLE_INIT") &&
925:	     access("/sys/fs/ext4/features/lazy_itable_init", F_OK) == 0))
926-		lazy_itable_init = 1;

I confirmed /sys is mounted, and then found a bug suggesting the
ext4 module is maybe not loaded:
https://bugzilla.redhat.com/show_bug.cgi?id=1071909

My home server doesn't have ext4 loaded and had 3T to play with, so
I tried (and succeeded with) replicating the issue locally:

[root@kif:/scratch]# lsmod | grep -i ext

[root@kif:/scratch]# zfs create -V 3G rpool/scratch/ext4

[root@kif:/scratch]# time mkfs.ext4 /dev/zvol/rpool/scratch/ext4
mke2fs 1.45.5 (07-Jan-2020)
Discarding device blocks: done
Creating filesystem with 786432 4k blocks and 196608 inodes
Filesystem UUID: 560a4a8f-93dc-40cc-97a5-f10049bf801f
Superblock backups stored on blocks:
	32768, 98304, 163840, 229376, 294912

Allocating group tables: done
Writing inode tables: done
Creating journal (16384 blocks): done
Writing superblocks and filesystem accounting information: done

real	0m2.261s
user	0m0.000s
sys	0m0.025s

[root@kif:/scratch]# zfs set volsize=3T rpool/scratch/ext4

[root@kif:/scratch]# time resize2fs -d 62 /dev/zvol/rpool/scratch/ext4
resize2fs 1.45.5 (07-Jan-2020)
fs has 11 inodes, 1 groups required.
fs requires 16390 data blocks.
With 1 group(s), we have 22234 blocks available.
Last group's overhead is 10534
Need 16390 data blocks in last group
Final size of last group is 26924
Estimated blocks needed: 26924
Extents safety margin: 49
Resizing the filesystem on /dev/zvol/rpool/scratch/ext4 to 805306368 (4k) blocks.
read_bitmaps: Memory used: 132k/0k (63k/70k), time:  0.00/ 0.00/ 0.00
read_bitmaps: I/O read: 1MB, write: 0MB, rate: 3802.28MB/s
fix_uninit_block_bitmaps 1: Memory used: 132k/0k (63k/70k), time:  0.00/ 0.00/ 0.00
resize_group_descriptors: Memory used: 132k/0k (68k/65k), time:  0.00/ 0.00/ 0.00
move_bg_metadata: Memory used: 132k/0k (68k/65k), time:  0.00/ 0.00/ 0.00
zero_high_bits_in_metadata: Memory used: 132k/0k (68k/65k), time:  0.00/ 0.00/ 0.00

here it got stuck for quite some time ... straceing this 20 minutes in revealed this in a tight loop:

getuid()                                = 0
geteuid()                               = 0
getgid()                                = 0
getegid()                               = 0
prctl(PR_GET_DUMPABLE)                  = 1 (SUID_DUMP_USER)
fallocate(3, FALLOC_FL_ZERO_RANGE, 2222649901056, 2097152) = 0
fsync(3)                                = 0

it finally ended 43(!) minutes later:

adjust_superblock: Memory used: 264k/3592k (210k/55k), time: 2554.03/ 0.16/15.07
fix_uninit_block_bitmaps 2: Memory used: 264k/3592k (210k/55k), time:  0.16/ 0.16/ 0.00
blocks_to_move: Memory used: 264k/3592k (211k/54k), time:  0.00/ 0.00/ 0.00
Number of free blocks: 755396/780023556, Needed: 0
block_mover: Memory used: 264k/3592k (216k/49k), time:  0.05/ 0.01/ 0.00
block_mover: I/O read: 1MB, write: 0MB, rate: 18.68MB/s
inode_scan_and_fix: Memory used: 264k/3592k (216k/49k), time:  0.00/ 0.00/ 0.00
inode_ref_fix: Memory used: 264k/3592k (216k/49k), time:  0.00/ 0.00/ 0.00
move_itables: Memory used: 264k/3592k (216k/49k), time:  0.00/ 0.00/ 0.00
calculate_summary_stats: Memory used: 264k/3592k (216k/49k), time: 16.35/16.35/ 0.00
fix_resize_inode: Memory used: 264k/3592k (222k/43k), time:  0.04/ 0.00/ 0.00
fix_resize_inode: I/O read: 1MB, write: 0MB, rate: 22.80MB/s
fix_sb_journal_backup: Memory used: 264k/3592k (222k/43k), time:  0.00/ 0.00/ 0.00
overall resize2fs: Memory used: 264k/3592k (222k/43k), time: 2570.90/16.68/15.07
overall resize2fs: I/O read: 1MB, write: 1MB, rate: 0.00MB/s
The filesystem on /dev/zvol/rpool/scratch/ext4 is now 805306368 (4k) blocks long.

real	43m1.943s
user	0m16.761s
sys	0m15.069s

I then cleaned up and recreated the zvol, loaded the ext4 module, created the ext4 fs,
resized the volume, and resize2fs'd and it went quite quickly:

[root@kif:/scratch]# zfs destroy rpool/scratch/ext4

[root@kif:/scratch]# zfs create -V 3G rpool/scratch/ext4

[root@kif:/scratch]# modprobe ext4

[root@kif:/scratch]# time resize2fs -d 62 /dev/zvol/rpool/scratch/ext4

[root@kif:/scratch]# time mkfs.ext4 /dev/zvol/rpool/scratch/ext4
mke2fs 1.45.5 (07-Jan-2020)
Discarding device blocks: done
Creating filesystem with 786432 4k blocks and 196608 inodes
Filesystem UUID: 5b415f2f-a8c4-4ba0-ac1d-78860de77610
Superblock backups stored on blocks:
	32768, 98304, 163840, 229376, 294912

Allocating group tables: done
Writing inode tables: done
Creating journal (16384 blocks): done
Writing superblocks and filesystem accounting information: done

real	0m1.013s
user	0m0.001s
sys	0m0.023s

[root@kif:/scratch]# zfs set volsize=3T rpool/scratch/ext4

[root@kif:/scratch]# time resize2fs -d 62 /dev/zvol/rpool/scratch/ext4
resize2fs 1.45.5 (07-Jan-2020)
fs has 11 inodes, 1 groups required.
fs requires 16390 data blocks.
With 1 group(s), we have 22234 blocks available.
Last group's overhead is 10534
Need 16390 data blocks in last group
Final size of last group is 26924
Estimated blocks needed: 26924
Extents safety margin: 49
Resizing the filesystem on /dev/zvol/rpool/scratch/ext4 to 805306368 (4k) blocks.
read_bitmaps: Memory used: 132k/0k (63k/70k), time:  0.00/ 0.00/ 0.00
read_bitmaps: I/O read: 1MB, write: 0MB, rate: 3389.83MB/s
fix_uninit_block_bitmaps 1: Memory used: 132k/0k (63k/70k), time:  0.00/ 0.00/ 0.00
resize_group_descriptors: Memory used: 132k/0k (68k/65k), time:  0.00/ 0.00/ 0.00
move_bg_metadata: Memory used: 132k/0k (68k/65k), time:  0.00/ 0.00/ 0.00
zero_high_bits_in_metadata: Memory used: 132k/0k (68k/65k), time:  0.00/ 0.00/ 0.00
adjust_superblock: Memory used: 264k/1540k (210k/55k), time:  0.02/ 0.02/ 0.00
fix_uninit_block_bitmaps 2: Memory used: 264k/1540k (210k/55k), time:  0.15/ 0.15/ 0.00
blocks_to_move: Memory used: 264k/1540k (211k/54k), time:  0.00/ 0.00/ 0.00
Number of free blocks: 755396/780023556, Needed: 0
block_mover: Memory used: 264k/3592k (216k/49k), time:  0.01/ 0.01/ 0.00
block_mover: I/O read: 1MB, write: 0MB, rate: 157.11MB/s
inode_scan_and_fix: Memory used: 264k/3592k (216k/49k), time:  0.00/ 0.00/ 0.00
inode_ref_fix: Memory used: 264k/3592k (216k/49k), time:  0.00/ 0.00/ 0.00
move_itables: Memory used: 264k/3592k (216k/49k), time:  0.00/ 0.00/ 0.00

calculate_summary_stats: Memory used: 264k/3592k (216k/49k), time: 16.20/16.20/ 0.00
fix_resize_inode: Memory used: 264k/3592k (222k/43k), time:  0.00/ 0.00/ 0.00
fix_resize_inode: I/O read: 1MB, write: 0MB, rate: 5319.15MB/s
fix_sb_journal_backup: Memory used: 264k/3592k (222k/43k), time:  0.00/ 0.00/ 0.00
overall resize2fs: Memory used: 264k/3592k (222k/43k), time: 16.45/16.38/ 0.00
overall resize2fs: I/O read: 1MB, write: 1MB, rate: 0.06MB/s
The filesystem on /dev/zvol/rpool/scratch/ext4 is now 805306368 (4k) blocks long.

real	0m17.908s
user	0m16.386s
sys	0m0.079s

Success!

Things done
  • Tested using sandboxing (nix.useSandbox on NixOS, or option sandbox in nix.conf on non-NixOS linux)
  • Built on platform(s)
    • NixOS
    • macOS
    • other Linux distributions
  • Tested via one or more NixOS test(s) if existing and applicable for the change (look inside nixos/tests)
  • Tested compilation of all pkgs that depend on this change using nix-shell -p nixpkgs-review --run "nixpkgs-review wip"
  • Tested execution of all binary files (usually in ./result/bin/)
  • Determined the impact on package closure size (by running nix path-info -S before and after)
  • Ensured that relevant documentation is up to date
  • Fits CONTRIBUTING.md.
I noticed booting a system with an ext4 root which expanded to 5T took
quite a long time (12 minutes in some cases, 43(!) in others.)

I changed stage-1 to run `resize2fs -d 62` for extra debug output and
timing information. It revealed the adjust_superblock step taking
almost all of the time:

    [Fri Oct 30 11:10:15 UTC 2020] zero_high_bits_in_metadata: Memory used: 132k/0k (63k/70k), time:  0.00/ 0.00/ 0.00
    [Fri Oct 30 11:21:09 UTC 2020] adjust_superblock: Memory used: 396k/4556k (295k/102k), time: 654.21/ 0.59/ 5.13

but when I ran resize2fs on a disk with the identical content growing
to the identical target size, it would only take about 30 seconds. I
looked at what happened between those two steps in the fast case with
strace and found:

```
   235	getrusage(RUSAGE_SELF, {ru_utime={tv_sec=0, tv_usec=1795}, ru_stime={tv_sec=0, tv_usec=3590}, ...}) = 0
   236	write(1, "zero_high_bits_in_metadata: Memo"..., 84zero_high_bits_in_metadata: Memory used: 132k/0k (72k/61k), time:  0.00/ 0.00/ 0.00
   237	) = 84
   238	gettimeofday({tv_sec=1604061278, tv_usec=480147}, NULL) = 0
   239	getrusage(RUSAGE_SELF, {ru_utime={tv_sec=0, tv_usec=1802}, ru_stime={tv_sec=0, tv_usec=3603}, ...}) = 0
   240	gettimeofday({tv_sec=1604061278, tv_usec=480192}, NULL) = 0
   241	mmap(NULL, 2564096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fa3c7355000
   242	access("/sys/fs/ext4/features/lazy_itable_init", F_OK) = 0
   243	brk(0xf85000)                           = 0xf85000
   244	brk(0xfa6000)                           = 0xfa6000
   245	gettimeofday({tv_sec=1604061278, tv_usec=538828}, NULL) = 0
   246	getrusage(RUSAGE_SELF, {ru_utime={tv_sec=0, tv_usec=58720}, ru_stime={tv_sec=0, tv_usec=3603}, ...}) = 0
   247	write(1, "adjust_superblock: Memory used: "..., 79adjust_superblock: Memory used: 396k/2504k (305k/92k), time:  0.06/ 0.06/ 0.00
   248	) = 79
   249	gettimeofday({tv_sec=1604061278, tv_usec=539119}, NULL) = 0
   250	getrusage(RUSAGE_SELF, {ru_utime={tv_sec=0, tv_usec=58812}, ru_stime={tv_sec=0, tv_usec=3603}, ...}) = 0
   251	gettimeofday({tv_sec=1604061279, tv_usec=939}, NULL) = 0
   252	getrusage(RUSAGE_SELF, {ru_utime={tv_sec=0, tv_usec=520411}, ru_stime={tv_sec=0, tv_usec=3603}, ...}) = 0
   253	write(1, "fix_uninit_block_bitmaps 2: Memo"..., 88fix_uninit_block_bitmaps 2: Memory used: 396k/2504k (305k/92k), time:  0.46/ 0.46/ 0.00
   254	) = 88
```

In particular the access to /sys/fs seemed interesting. Looking
at the source of resize2fs:

```
[root@ip-172-31-22-182:~/e2fsprogs-1.45.5]# rg -B2 -A1 /sys/fs/ext4/features/lazy_itable_init .
./resize/resize2fs.c
923-	if (getenv("RESIZE2FS_FORCE_LAZY_ITABLE_INIT") ||
924-	    (!getenv("RESIZE2FS_FORCE_ITABLE_INIT") &&
925:	     access("/sys/fs/ext4/features/lazy_itable_init", F_OK) == 0))
926-		lazy_itable_init = 1;
```

I confirmed /sys is mounted, and then found a bug suggesting the
ext4 module is maybe not loaded:
https://bugzilla.redhat.com/show_bug.cgi?id=1071909

My home server doesn't have ext4 loaded and had 3T to play with, so
I tried (and succeeded with) replicating the issue locally:

```
[root@kif:/scratch]# lsmod | grep -i ext

[root@kif:/scratch]# zfs create -V 3G rpool/scratch/ext4

[root@kif:/scratch]# time mkfs.ext4 /dev/zvol/rpool/scratch/ext4
mke2fs 1.45.5 (07-Jan-2020)
Discarding device blocks: done
Creating filesystem with 786432 4k blocks and 196608 inodes
Filesystem UUID: 560a4a8f-93dc-40cc-97a5-f10049bf801f
Superblock backups stored on blocks:
	32768, 98304, 163840, 229376, 294912

Allocating group tables: done
Writing inode tables: done
Creating journal (16384 blocks): done
Writing superblocks and filesystem accounting information: done

real	0m2.261s
user	0m0.000s
sys	0m0.025s

[root@kif:/scratch]# zfs set volsize=3T rpool/scratch/ext4

[root@kif:/scratch]# time resize2fs -d 62 /dev/zvol/rpool/scratch/ext4
resize2fs 1.45.5 (07-Jan-2020)
fs has 11 inodes, 1 groups required.
fs requires 16390 data blocks.
With 1 group(s), we have 22234 blocks available.
Last group's overhead is 10534
Need 16390 data blocks in last group
Final size of last group is 26924
Estimated blocks needed: 26924
Extents safety margin: 49
Resizing the filesystem on /dev/zvol/rpool/scratch/ext4 to 805306368 (4k) blocks.
read_bitmaps: Memory used: 132k/0k (63k/70k), time:  0.00/ 0.00/ 0.00
read_bitmaps: I/O read: 1MB, write: 0MB, rate: 3802.28MB/s
fix_uninit_block_bitmaps 1: Memory used: 132k/0k (63k/70k), time:  0.00/ 0.00/ 0.00
resize_group_descriptors: Memory used: 132k/0k (68k/65k), time:  0.00/ 0.00/ 0.00
move_bg_metadata: Memory used: 132k/0k (68k/65k), time:  0.00/ 0.00/ 0.00
zero_high_bits_in_metadata: Memory used: 132k/0k (68k/65k), time:  0.00/ 0.00/ 0.00
```

here it got stuck for quite some time ... straceing this 20 minutes in revealed this in a tight loop:

```
getuid()                                = 0
geteuid()                               = 0
getgid()                                = 0
getegid()                               = 0
prctl(PR_GET_DUMPABLE)                  = 1 (SUID_DUMP_USER)
fallocate(3, FALLOC_FL_ZERO_RANGE, 2222649901056, 2097152) = 0
fsync(3)                                = 0
```

it finally ended 43(!) minutes later:

```
adjust_superblock: Memory used: 264k/3592k (210k/55k), time: 2554.03/ 0.16/15.07
fix_uninit_block_bitmaps 2: Memory used: 264k/3592k (210k/55k), time:  0.16/ 0.16/ 0.00
blocks_to_move: Memory used: 264k/3592k (211k/54k), time:  0.00/ 0.00/ 0.00
Number of free blocks: 755396/780023556, Needed: 0
block_mover: Memory used: 264k/3592k (216k/49k), time:  0.05/ 0.01/ 0.00
block_mover: I/O read: 1MB, write: 0MB, rate: 18.68MB/s
inode_scan_and_fix: Memory used: 264k/3592k (216k/49k), time:  0.00/ 0.00/ 0.00
inode_ref_fix: Memory used: 264k/3592k (216k/49k), time:  0.00/ 0.00/ 0.00
move_itables: Memory used: 264k/3592k (216k/49k), time:  0.00/ 0.00/ 0.00
calculate_summary_stats: Memory used: 264k/3592k (216k/49k), time: 16.35/16.35/ 0.00
fix_resize_inode: Memory used: 264k/3592k (222k/43k), time:  0.04/ 0.00/ 0.00
fix_resize_inode: I/O read: 1MB, write: 0MB, rate: 22.80MB/s
fix_sb_journal_backup: Memory used: 264k/3592k (222k/43k), time:  0.00/ 0.00/ 0.00
overall resize2fs: Memory used: 264k/3592k (222k/43k), time: 2570.90/16.68/15.07
overall resize2fs: I/O read: 1MB, write: 1MB, rate: 0.00MB/s
The filesystem on /dev/zvol/rpool/scratch/ext4 is now 805306368 (4k) blocks long.

real	43m1.943s
user	0m16.761s
sys	0m15.069s
```

I then cleaned up and recreated the zvol, loaded the ext4 module, created the ext4 fs,
resized the volume, and resize2fs'd and it went quite quickly:

```
[root@kif:/scratch]# zfs destroy rpool/scratch/ext4

[root@kif:/scratch]# zfs create -V 3G rpool/scratch/ext4

[root@kif:/scratch]# modprobe ext4

[root@kif:/scratch]# time resize2fs -d 62 /dev/zvol/rpool/scratch/ext4

[root@kif:/scratch]# time mkfs.ext4 /dev/zvol/rpool/scratch/ext4
mke2fs 1.45.5 (07-Jan-2020)
Discarding device blocks: done
Creating filesystem with 786432 4k blocks and 196608 inodes
Filesystem UUID: 5b415f2f-a8c4-4ba0-ac1d-78860de77610
Superblock backups stored on blocks:
	32768, 98304, 163840, 229376, 294912

Allocating group tables: done
Writing inode tables: done
Creating journal (16384 blocks): done
Writing superblocks and filesystem accounting information: done

real	0m1.013s
user	0m0.001s
sys	0m0.023s

[root@kif:/scratch]# zfs set volsize=3T rpool/scratch/ext4

[root@kif:/scratch]# time resize2fs -d 62 /dev/zvol/rpool/scratch/ext4
resize2fs 1.45.5 (07-Jan-2020)
fs has 11 inodes, 1 groups required.
fs requires 16390 data blocks.
With 1 group(s), we have 22234 blocks available.
Last group's overhead is 10534
Need 16390 data blocks in last group
Final size of last group is 26924
Estimated blocks needed: 26924
Extents safety margin: 49
Resizing the filesystem on /dev/zvol/rpool/scratch/ext4 to 805306368 (4k) blocks.
read_bitmaps: Memory used: 132k/0k (63k/70k), time:  0.00/ 0.00/ 0.00
read_bitmaps: I/O read: 1MB, write: 0MB, rate: 3389.83MB/s
fix_uninit_block_bitmaps 1: Memory used: 132k/0k (63k/70k), time:  0.00/ 0.00/ 0.00
resize_group_descriptors: Memory used: 132k/0k (68k/65k), time:  0.00/ 0.00/ 0.00
move_bg_metadata: Memory used: 132k/0k (68k/65k), time:  0.00/ 0.00/ 0.00
zero_high_bits_in_metadata: Memory used: 132k/0k (68k/65k), time:  0.00/ 0.00/ 0.00
adjust_superblock: Memory used: 264k/1540k (210k/55k), time:  0.02/ 0.02/ 0.00
fix_uninit_block_bitmaps 2: Memory used: 264k/1540k (210k/55k), time:  0.15/ 0.15/ 0.00
blocks_to_move: Memory used: 264k/1540k (211k/54k), time:  0.00/ 0.00/ 0.00
Number of free blocks: 755396/780023556, Needed: 0
block_mover: Memory used: 264k/3592k (216k/49k), time:  0.01/ 0.01/ 0.00
block_mover: I/O read: 1MB, write: 0MB, rate: 157.11MB/s
inode_scan_and_fix: Memory used: 264k/3592k (216k/49k), time:  0.00/ 0.00/ 0.00
inode_ref_fix: Memory used: 264k/3592k (216k/49k), time:  0.00/ 0.00/ 0.00
move_itables: Memory used: 264k/3592k (216k/49k), time:  0.00/ 0.00/ 0.00

calculate_summary_stats: Memory used: 264k/3592k (216k/49k), time: 16.20/16.20/ 0.00
fix_resize_inode: Memory used: 264k/3592k (222k/43k), time:  0.00/ 0.00/ 0.00
fix_resize_inode: I/O read: 1MB, write: 0MB, rate: 5319.15MB/s
fix_sb_journal_backup: Memory used: 264k/3592k (222k/43k), time:  0.00/ 0.00/ 0.00
overall resize2fs: Memory used: 264k/3592k (222k/43k), time: 16.45/16.38/ 0.00
overall resize2fs: I/O read: 1MB, write: 1MB, rate: 0.06MB/s
The filesystem on /dev/zvol/rpool/scratch/ext4 is now 805306368 (4k) blocks long.

real	0m17.908s
user	0m16.386s
sys	0m0.079s
```

Success!
@grahamc grahamc merged commit b34cf36 into NixOS:master Oct 30, 2020
17 checks passed
17 checks passed
@github-actions
tests
Details
@github-actions
action
Details
@ofborg
Evaluation Performance Report Evaluator Performance Report
Details
@github-actions
Wait for ofborg
Details
@ofborg
grahamcofborg-eval ^.^!
Details
@ofborg
grahamcofborg-eval-check-maintainers matching changed paths to changed attrs...
Details
@ofborg
grahamcofborg-eval-check-meta config.nix: checkMeta = true
Details
@ofborg
grahamcofborg-eval-darwin nix-instantiate --arg nixpkgs { outPath=./.; revCount=999999; shortRev="ece5c0f"; rev="ece5c0f30425c09ec5d531c808031db69e28b4cf"; } ./pkgs/t
Details
@ofborg
grahamcofborg-eval-lib-tests nix-build --arg pkgs import ./. {} ./lib/tests/release.nix
Details
@ofborg
grahamcofborg-eval-nixos nix-instantiate --arg nixpkgs { outPath=./.; revCount=999999; shortRev="ece5c0f"; rev="ece5c0f30425c09ec5d531c808031db69e28b4cf"; } ./nixos/
Details
@ofborg
grahamcofborg-eval-nixos-manual nix-instantiate --arg nixpkgs { outPath=./.; revCount=999999; shortRev="ece5c0f"; rev="ece5c0f30425c09ec5d531c808031db69e28b4cf"; } ./nixos/
Details
@ofborg
grahamcofborg-eval-nixos-options nix-instantiate --arg nixpkgs { outPath=./.; revCount=999999; shortRev="ece5c0f"; rev="ece5c0f30425c09ec5d531c808031db69e28b4cf"; } ./nixos/
Details
@ofborg
grahamcofborg-eval-nixpkgs-manual nix-instantiate --arg nixpkgs { outPath=./.; revCount=999999; shortRev="ece5c0f"; rev="ece5c0f30425c09ec5d531c808031db69e28b4cf"; } ./pkgs/t
Details
@ofborg
grahamcofborg-eval-nixpkgs-tarball nix-instantiate --arg nixpkgs { outPath=./.; revCount=999999; shortRev="ece5c0f"; rev="ece5c0f30425c09ec5d531c808031db69e28b4cf"; } ./pkgs/t
Details
@ofborg
grahamcofborg-eval-nixpkgs-unstable-jobset nix-instantiate --arg nixpkgs { outPath=./.; revCount=999999; shortRev="ece5c0f"; rev="ece5c0f30425c09ec5d531c808031db69e28b4cf"; } ./pkgs/t
Details
@ofborg
grahamcofborg-eval-package-list nix-env -qa --json --file .
Details
@ofborg
grahamcofborg-eval-package-list-no-aliases nix-env -qa --json --file . --arg config { allowAliases = false; }
Details
@grahamc grahamc deleted the grahamc:faster-ext-resize branch Oct 30, 2020
@obadz
Copy link
Contributor

@obadz obadz commented Oct 31, 2020

Very nice 👍

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Projects
None yet
Linked issues

Successfully merging this pull request may close these issues.

None yet

3 participants