From 7f2b788a7d4649f0164e995d6ac18a4f55d3e98a Mon Sep 17 00:00:00 2001 From: Adam Joseph Date: Mon, 15 May 2023 01:05:04 -0700 Subject: [PATCH 1/5] release-notes: mention that powerpc64 now uses IEEE-standard floats (cherry picked from commit c87e1115d75fffc0b83a0f94f32c93e47f13cc15) --- nixos/doc/manual/release-notes/rl-2305.section.md | 2 ++ 1 file changed, 2 insertions(+) diff --git a/nixos/doc/manual/release-notes/rl-2305.section.md b/nixos/doc/manual/release-notes/rl-2305.section.md index 573d235d944390..0623e812e7d843 100644 --- a/nixos/doc/manual/release-notes/rl-2305.section.md +++ b/nixos/doc/manual/release-notes/rl-2305.section.md @@ -526,6 +526,8 @@ In addition to numerous new and upgraded packages, this release has the followin - The `services.fwupd` module now allows arbitrary daemon settings to be configured in a structured manner ([`services.fwupd.daemonSettings`](#opt-services.fwupd.daemonSettings)). +- Nixpkgs now uses [IEEE-standard floating point arithmetic](https://github.com/NixOS/nixpkgs/pull/170215) on `powerpc64le-linux`. + - `services.xserver.desktopManager.plasma5.phononBackend` now defaults to vlc according to [upstrean recommendation](https://community.kde.org/Distributions/Packaging_Recommendations#Non-Plasma_packages) - The `zramSwap` is now implemented with `zram-generator`, and the option `zramSwap.numDevices` for using ZRAM devices as general purpose ephemeral block devices has been removed. From 7aeb7d0a6185111e900fbe9e99235afb6f29bf3c Mon Sep 17 00:00:00 2001 From: Adam Joseph Date: Mon, 15 May 2023 00:21:41 -0700 Subject: [PATCH 2/5] release-notes: note ability to build powerpc64le-linux NixOS ISOs This commit adds a mention to the release notes of the fact that NixOS 23.05 can build installer ISOs for a new platform. (cherry picked from commit 2983698c4b4d8c46c524f1e0c705163dda645786) --- nixos/doc/manual/release-notes/rl-2305.section.md | 2 ++ 1 file changed, 2 insertions(+) diff --git a/nixos/doc/manual/release-notes/rl-2305.section.md b/nixos/doc/manual/release-notes/rl-2305.section.md index 0623e812e7d843..c3cc69699cbac5 100644 --- a/nixos/doc/manual/release-notes/rl-2305.section.md +++ b/nixos/doc/manual/release-notes/rl-2305.section.md @@ -423,6 +423,8 @@ In addition to numerous new and upgraded packages, this release has the followin - The minimal ISO image now uses the `nixos/modules/profiles/minimal.nix` profile. +- NixOS installer ISOs can now be built for `powerpc64le-linux`; see `nixos/modules/installer/sd-card/sd-image-powerpc64le.nix` and [PR 192672](https://github.com/NixOS/nixpkgs/pull/192672). Hydra does not support this platform, so you must build the binaries yourself. + - The `ghcWithPackages` and `ghcWithHoogle` wrappers will now also symlink GHC's and all included libraries' documentation to `$out/share/doc` for convenience. If undesired, the old behavior can be restored by overriding the builders with From 50801ac9ce51c229215d8dd3888c15723cbebf4c Mon Sep 17 00:00:00 2001 From: Yaya Date: Thu, 20 Apr 2023 12:43:06 +0000 Subject: [PATCH 3/5] nixos/doc: add release note for sftpgo (cherry picked from commit ae47862b938bf0535dfd54171d1d25d191f1c3fb) --- nixos/doc/manual/release-notes/rl-2305.section.md | 2 ++ 1 file changed, 2 insertions(+) diff --git a/nixos/doc/manual/release-notes/rl-2305.section.md b/nixos/doc/manual/release-notes/rl-2305.section.md index c3cc69699cbac5..b4d488cb1d3ed9 100644 --- a/nixos/doc/manual/release-notes/rl-2305.section.md +++ b/nixos/doc/manual/release-notes/rl-2305.section.md @@ -96,6 +96,8 @@ In addition to numerous new and upgraded packages, this release has the followin - [atuin](https://github.com/ellie/atuin), a sync server for shell history. Available as [services.atuin](#opt-services.atuin.enable). +- [SFTPGo](https://github.com/drakkan/sftpgo), a fully featured and highly configurable SFTP server with optional HTTP/S, FTP/S and WebDAV support. Available as [services.sftpgo](options.html#opt-services.sftpgo.enable). + - [esphome](https://esphome.io), a dashboard to configure ESP8266/ESP32 devices for use with Home Automation systems. Available as [services.esphome](#opt-services.esphome.enable). - [networkd-dispatcher](https://gitlab.com/craftyguy/networkd-dispatcher), a dispatcher service for systemd-networkd connection status changes. Available as [services.networkd-dispatcher](#opt-services.networkd-dispatcher.enable). From 63c89cb2b25693fd24ad598914d1e86886d0d662 Mon Sep 17 00:00:00 2001 From: Atemu Date: Sun, 28 May 2023 17:37:22 +0200 Subject: [PATCH 4/5] rl-2305: mention buildFHSEnv switch to bubblewrap See https://github.com/NixOS/nixpkgs/pull/225748 (cherry picked from commit 3720991c06f1e8d97c091b897881aa1d562269c7) --- nixos/doc/manual/release-notes/rl-2305.section.md | 2 ++ 1 file changed, 2 insertions(+) diff --git a/nixos/doc/manual/release-notes/rl-2305.section.md b/nixos/doc/manual/release-notes/rl-2305.section.md index b4d488cb1d3ed9..be45e6252bdf14 100644 --- a/nixos/doc/manual/release-notes/rl-2305.section.md +++ b/nixos/doc/manual/release-notes/rl-2305.section.md @@ -194,6 +194,8 @@ In addition to numerous new and upgraded packages, this release has the followin - `graylog` has been updated to version 5, which can not be upgraded directly from the previously packaged version 3.3. If you had installed the previously packaged version 3.3, please follow the [upgrade path](https://go2docs.graylog.org/5-0/upgrading_graylog/upgrade_path.htm) from 3.3 to 4.0 to 4.3 to 5.0. +- `buildFHSUserEnv` is now called `buildFHSEnv` and uses FlatPak's Bubblewrap sandboxing tool rather than Nixpkgs' own chrootenv. The old chrootenv-based implemenation is still available via `buildFHSEnvChrootenv` but is considered deprecated and will be removed when the remaining uses inside Nixpkgs have been migrated. If your FHSEnv-wrapped application misbehaves when using the new bubblewrap implementation, please create an issue in Nixpkgs. + - `nushell` has been updated to at least version 0.77.0, which includes potential breaking changes in aliases. The old aliases are now available as `old-alias` but it is recommended you migrate to the new format. See [Reworked aliases](https://www.nushell.sh/blog/2023-03-14-nushell_0_77.html#reworked-aliases-breaking-changes-kubouch). - `gajim` has been updated to version 1.7.3 which has disabled legacy ciphers. See [changelog for version 1.7.0](https://dev.gajim.org/gajim/gajim/-/releases/1.7.0). From 2677e428c0a4e34a0ead0c288e8ec1e8089e7fe6 Mon Sep 17 00:00:00 2001 From: Raito Bezarius Date: Tue, 30 May 2023 01:38:54 +0200 Subject: [PATCH 5/5] rl-2305: alpha version for 23.05 This is an alpha version worked out by the release managers. Co-Authored-By: Martin Weinelt --- .../manual/release-notes/rl-2305.section.md | 398 +++++++++--------- 1 file changed, 195 insertions(+), 203 deletions(-) diff --git a/nixos/doc/manual/release-notes/rl-2305.section.md b/nixos/doc/manual/release-notes/rl-2305.section.md index be45e6252bdf14..3baec9a4390eee 100644 --- a/nixos/doc/manual/release-notes/rl-2305.section.md +++ b/nixos/doc/manual/release-notes/rl-2305.section.md @@ -1,65 +1,80 @@ -# Release 23.05 (“Stoat”, 2023.05/??) {#sec-release-23.05} +# Release 23.05 (“Stoat”, 2023.05/31) {#sec-release-23.05} -Support is planned until the end of December 2023, handing over to 23.11. +The NixOS release team is happy to announce a new version of NixOS. The release is called NixOS 23.05 ("Stoat"). -## Highlights {#sec-release-23.05-highlights} +NixOS is a Linux distribution, whose set of packages can also be used on other Linux systems and macOS. -In addition to numerous new and upgraded packages, this release has the following highlights: +Support is planned until the end of December 2023, handing over to NixOS 23.11. - +To upgrade to the latest release, follow the [upgrade chapter](https://nixos.org/manual/nixos/stable/index.html#sec-upgrading). -- Core version changes: +## Highlights {#sec-release-23.05-highlights} - - default linux: 5.15 -\> 6.1, all supported kernels available +In addition to numerous new and updated packages, this release has the following highlights: - - systemd has been updated to v253.1, see [the pull request](https://github.com/NixOS/nixpkgs/pull/216826) for more info. - It's recommended to use `nixos-rebuild boot` and `reboot`, rather than `nixos-rebuild switch` - since in some rare cases - the switch of a live system might fail. +- The default Linux kernel has been updated from 5.15 to 6.1, all kernels version supported on are also available. - - glibc: 2.35 -\> 2.37 +- systemd has been updated from v252 to v253, see [release notes](https://github.com/systemd/systemd/blob/main/NEWS#L21-L677) for more info. + - Updating with `nixos-rebuild boot` and `reboot` is recommended, since in some rare cases the `switch` into the new generation on a live system might fail due to missing mount units. -- Cinnamon has been updated to 5.6, see [the pull request](https://github.com/NixOS/nixpkgs/pull/201328#issue-1449910204) for what is changed. +- The glibc has been updated from 2.35 to 2.37 -- GNOME has been upgraded to version 44. Please see the [release notes](https://release.gnome.org/44/) for details. +- GNOME has been updated to version 44. Please see the [release notes](https://release.gnome.org/44/) for details. - KDE Plasma has been updated to v5.27, see [the release notes](https://kde.org/announcements/plasma/5/5.27.0/) for what is changed. -- Python implements [PEP 668](https://peps.python.org/pep-0668/), providing better feedback to users that try to run `pip install` system-wide. +- Cinnamon has been updated to 5.6, see [the pull request](https://github.com/NixOS/nixpkgs/pull/201328#issue-1449910204) for what is changed. -- `nixos-rebuild` now supports an extra `--specialisation` option that can be used to change specialisation for `switch` and `test` commands. +- `libxcrypt`, the library providing the `crypt(3)` password hashing function, is now built without support for algorithms not flagged [`strong`](https://github.com/besser82/libxcrypt/blob/v4.4.33/lib/hashes.conf#L48). This affects the availability of password hashing algorithms used for system login (`login(1)`, `passwd(1)`), but also Apache2 Basic-Auth, Samba, OpenLDAP, Dovecot, and [many other packages](https://sourcegraph.com/search?q=context:global+repo:%5Egithub%5C.com/NixOS/nixpkgs%24+libxcrypt&patternType=standard&sm=1&groupBy=path). -- `libxcrypt`, the library providing the `crypt(3)` password hashing function, is now built without support for algorithms not flagged [`strong`](https://github.com/besser82/libxcrypt/blob/v4.4.33/lib/hashes.conf#L48). This affects the availability of password hashing algorithms used for system login (`login(1)`, `passwd(1)`), but also Apache2 Basic-Auth, Samba, OpenLDAP, Dovecot, and [many other packages](https://github.com/search?q=repo%3ANixOS%2Fnixpkgs%20libxcrypt&type=code). +- NixOS now defaults to using [nsncd](https://github.com/twosigma/nsncd), a non-caching reimplementation of nscd in Rust, as its NSS lookup dispatcher. This replaces the buggy and deprecated nscd implementation provided through glibc. When you find problems, you can switch back by setting + ```nix + services.nscd.enableNsncd = false; + ``` + but please open an issue in nixpkgs, so your problem can be addressed. -- `boot.bootspec.enable` (internal option) is now enabled by default because [RFC-0125](https://github.com/NixOS/rfcs/pull/125) was merged. This means you will have a bootspec document called `boot.json` generated for each system and specialisation in the top-level. This is useful to enable advanced boot usecases in NixOS such as SecureBoot. +- Python implements [PEP 668](https://peps.python.org/pep-0668/), providing better feedback to users that try to run `pip install` for system-wide or user home installations. -## New Services {#sec-release-23.05-new-services} +- There have been two changes to `nixos-rebuild`: + - Support for an extra `--specialisation` option was added that can be used to change specialisation for `switch` and `test` commands. + - The `--target-host` and `--build-host` options no longer treat the `localhost` value specially – to build on/deploy to a local machine, omit the relevant flag. - +- `boot.bootspec.enable` (internal option) is now enabled by default because [RFC 0125](https://github.com/NixOS/rfcs/pull/125) was merged. This means you will have a bootspec document called `boot.json` generated for each system and specialisation in the top-level. This is useful to enable advanced boot use cases in NixOS, such as Secure Boot. + +## New Services {#sec-release-23.05-new-services} - [Akkoma](https://akkoma.social), an ActivityPub microblogging server. Available as [services.akkoma](options.html#opt-services.akkoma.enable). -- [Pixelfed](https://pixelfed.org/), an Instagram-like ActivityPub server. Available as [services.pixelfed](options.html#opt-services.pixelfed.enable). +- [alertmanager-irc-relay](https://github.com/google/alertmanager-irc-relay), a Prometheus Alertmanager IRC Relay. Available as [services.prometheus.alertmanagerIrcRelay](options.html#opt-services.prometheus.alertmanagerIrcRelay.enable). -- [blesh](https://github.com/akinomyoga/ble.sh), a line editor written in pure bash. Available as [programs.bash.blesh](#opt-programs.bash.blesh.enable). +- [alice-lg](github.com/alice-lg/alice-lg), a looking-glass for BGP sessions. Available as [services.alice-lg](#opt-services.alice-lg.enable). -- [webhook](https://github.com/adnanh/webhook), a lightweight webhook server. Available as [services.webhook](#opt-services.webhook.enable). +- [atuin](https://github.com/ellie/atuin), a sync server for shell history. Available as [services.atuin](#opt-services.atuin.enable). + +- [authelia](https://www.authelia.com/), an open-source authentication and authorization server. Available as [services.authelia](options.html#opt-services.authelia.enable). + +- [birdwatcher](github.com/alice-lg/birdwatcher), a small HTTP server meant to provide an API defined by Barry O'Donovan's birds-eye to the BIRD internet routing daemon. Available as [services.birdwatcher](#opt-services.birdwatcher.enable). + +- [blesh](https://github.com/akinomyoga/ble.sh), a line editor written in pure bash. Available as [programs.bash.blesh](#opt-programs.bash.blesh.enable). -- [cups-pdf-to-pdf](https://github.com/alexivkin/CUPS-PDF-to-PDF), a pdf-generating cups backend based on [cups-pdf](https://www.cups-pdf.de/). Available as [services.printing.cups-pdf](#opt-services.printing.cups-pdf.enable). +- [Budgie Desktop](https://github.com/BuddiesOfBudgie/budgie-desktop), a familiar, modern desktop environment. Available as [services.xserver.desktopManager.budgie](options.html#opt-services.xserver.desktopManager.budgie). -- [clash-verge](https://github.com/zzzgydi/clash-verge), A Clash GUI based on tauri. Available as [programs.clash-verge](#opt-programs.clash-verge.enable). +- [clash-verge](https://github.com/zzzgydi/clash-verge), a Clash GUI based on tauri. Available as [programs.clash-verge](#opt-programs.clash-verge.enable). - [Cloudlog](https://www.magicbug.co.uk/cloudlog/), a web-based Amateur Radio logging application. Available as [services.cloudlog](#opt-services.cloudlog.enable). +- [consul-template](https://github.com/hashicorp/consul-template/), a template renderer, notifier, and supervisor for HashiCorp Consul and Vault data. Available as [services.consul-template](#opt-services.consul-template.instances). + +- [cups-pdf-to-pdf](https://github.com/alexivkin/CUPS-PDF-to-PDF), a PDF-generating CUPS backend based on [cups-pdf](https://www.cups-pdf.de/). Available as [services.printing.cups-pdf](#opt-services.printing.cups-pdf.enable). + - [Deepin Desktop Environment](https://github.com/linuxdeepin/dde), an elegant, easy to use and reliable desktop environment. Available as [services.xserver.desktopManager.deepin](options.html#opt-services.xserver.desktopManager.deepin). -- [system-repart](https://www.freedesktop.org/software/systemd/man/systemd-repart.service.html), grow and add partitions to a partition table. Available as [systemd.repart](options.html#opt-systemd.repart) and [boot.initrd.systemd.repart](options.html#opt-boot.initrd.systemd.repart) +- [esphome](https://esphome.io), a dashboard to configure ESP8266/ESP32 devices for use with Home Automation systems. Available as [services.esphome](#opt-services.esphome.enable). - [frigate](https://frigate.video), an open source NVR built around real-time AI object detection. Available as [services.frigate](#opt-services.frigate.enable). - [fzf](https://github.com/junegunn/fzf), a command line fuzzyfinder. Available as [programs.fzf](#opt-programs.fzf.fuzzyCompletion). -- [readarr](https://github.com/Readarr/Readarr), Book Manager and Automation (Sonarr for Ebooks). Available as [services.readarr](options.html#opt-services.readarr.enable). - - [gemstash](https://github.com/rubygems/gemstash), a RubyGems.org cache and private gem server. Available as [services.gemstash](#opt-services.gemstash.enable). - [gitea-actions-runner](https://gitea.com/gitea/act_runner), a CI runner for Gitea/Forgejo Actions. Available as [services.gitea-actions-runner](#opt-services.gitea-actions-runner.instances). @@ -68,131 +83,122 @@ In addition to numerous new and upgraded packages, this release has the followin - [go2rtc](https://github.com/AlexxIT/go2rtc), a camera streaming appliation with support for RTSP, WebRTC, HomeKit, FFMPEG, RTMP and other protocols. Available as [services.go2rtc](options.html#opt-services.go2rtc.enable). -- [harmonia](https://github.com/nix-community/harmonia/), Nix binary cache implemented in rust using libnix-store. Available as [services.harmonia](options.html#opt-services.harmonia.enable). +- [goeland](https://github.com/slurdge/goeland), an alternative to rss2email written in Golang with many filters. Available as [services.goeland](#opt-services.goeland.enable). -- [hyprland](https://github.com/hyprwm/hyprland), a dynamic tiling Wayland compositor that doesn't sacrifice on its looks. Available as [programs.hyprland](#opt-programs.hyprland.enable). +- [gonic](https://github.com/sentriz/gonic), a Subsonic music streaming server. Available as [services.gonic](#opt-services.gonic.enable). -- [minipro](https://gitlab.com/DavidGriffith/minipro/), an open source program for controlling the MiniPRO TL866xx series of chip programmers. Available as [programs.minipro](options.html#opt-programs.minipro.enable). +- [hardware.ipu6](#opt-hardware.ipu6.enable), drivers for IPU6 based webcams on Intel Tiger Lake and Alder Lake. -- [stevenblack-blocklist](https://github.com/StevenBlack/hosts), A unified hosts file with base extensions for blocking unwanted websites. Available as [networking.stevenblack](options.html#opt-networking.stevenblack.enable). +- [harmonia](https://github.com/nix-community/harmonia/), a Nix binary cache implemented in Rust using [libnixstore](https://docs.rs/libnixstore/latest/libnixstore/). Available as [services.harmonia](options.html#opt-services.harmonia.enable). -- [Budgie Desktop](https://github.com/BuddiesOfBudgie/budgie-desktop), a familiar, modern desktop environment. Available as [services.xserver.desktopManager.budgie](options.html#opt-services.xserver.desktopManager.budgie). +- [hyprland](https://github.com/hyprwm/hyprland), a dynamic tiling Wayland compositor that doesn't sacrifice on its looks. Available as [programs.hyprland](#opt-programs.hyprland.enable). - [imaginary](https://github.com/h2non/imaginary), a microservice for high-level image processing that Nextcloud can use to generate previews. Available as [services.imaginary](#opt-services.imaginary.enable). -- [opensearch](https://opensearch.org), a search server alternative to Elasticsearch. Available as [services.opensearch](options.html#opt-services.opensearch.enable). +- [ivpn](https://www.ivpn.net/), a secure, private VPN with fast WireGuard connections. Available as [services.ivpn](#opt-services.ivpn.enable). -- [kavita](https://kavitareader.com), a self-hosted digital library. Available as [services.kavita](options.html#opt-services.kavita.enable). +- [jellyseerr](https://github.com/Fallenbagel/jellyseerr), a web-based requests manager for Jellyfin, forked from Overseerr. Available as [services.jellyseerr](#opt-services.jellyseerr.enable). -- [monica](https://www.monicahq.com), an open source personal CRM. Available as [services.monica](options.html#opt-services.monica.enable). +- [kavita](https://kavitareader.com), a self-hosted digital library. Available as [services.kavita](options.html#opt-services.kavita.enable). -- [authelia](https://www.authelia.com/), is an open-source authentication and authorization server. Available under [services.authelia](options.html#opt-services.authelia.enable). +- [keyd](https://github.com/rvaiya/keyd), a key remapping daemon for Linux. Available as [services.keyd](#opt-services.keyd.enable). -- [goeland](https://github.com/slurdge/goeland), an alternative to rss2email written in golang with many filters. Available as [services.goeland](#opt-services.goeland.enable). +- [lldap](https://github.com/lldap/lldap), a lightweight authentication server that provides an opinionated, simplified LDAP interface for authentication. Available as [services.lldap](#opt-services.lldap.enable). -- [alertmanager-irc-relay](https://github.com/google/alertmanager-irc-relay), a Prometheus Alertmanager IRC Relay. Available as [services.prometheus.alertmanagerIrcRelay](options.html#opt-services.prometheus.alertmanagerIrcRelay.enable). +- [minipro](https://gitlab.com/DavidGriffith/minipro/), an open source program for controlling the MiniPRO TL866xx series of chip programmers. Available as [programs.minipro](options.html#opt-programs.minipro.enable). -- [tts](https://github.com/coqui-ai/TTS), a battle-tested deep learning toolkit for Text-to-Speech. Multiple servers may be configured below [services.tts.servers](#opt-services.tts.servers). +- [mmsd](https://gitlab.com/kop316/mmsd), a lower level daemon that transmits and receives MMSes. Available as [services.mmsd](#opt-services.mmsd.enable). -- [atuin](https://github.com/ellie/atuin), a sync server for shell history. Available as [services.atuin](#opt-services.atuin.enable). +- [monica](https://www.monicahq.com), an open source personal CRM. Available as [services.monica](options.html#opt-services.monica.enable). -- [SFTPGo](https://github.com/drakkan/sftpgo), a fully featured and highly configurable SFTP server with optional HTTP/S, FTP/S and WebDAV support. Available as [services.sftpgo](options.html#opt-services.sftpgo.enable). +- [networkd-dispatcher](https://gitlab.com/craftyguy/networkd-dispatcher), a dispatcher service for systemd-networkd connection status changes. Available as [services.networkd-dispatcher](#opt-services.networkd-dispatcher.enable). -- [esphome](https://esphome.io), a dashboard to configure ESP8266/ESP32 devices for use with Home Automation systems. Available as [services.esphome](#opt-services.esphome.enable). +- [nimdow](https://github.com/avahe-kellenberger/nimdow), a window manager written in Nim, inspired by dwm. Available as [services.xserver.windowManager.nimdow.enable](options.html#opt-services.xserver.windowManager.nimdow.enable). -- [networkd-dispatcher](https://gitlab.com/craftyguy/networkd-dispatcher), a dispatcher service for systemd-networkd connection status changes. Available as [services.networkd-dispatcher](#opt-services.networkd-dispatcher.enable). +- [opensearch](https://opensearch.org), a search server alternative to Elasticsearch. Available as [services.opensearch](options.html#opt-services.opensearch.enable). -- [gonic](https://github.com/sentriz/gonic), a Subsonic music streaming server. Available as [services.gonic](#opt-services.gonic.enable). +- [openvscode-server](https://github.com/gitpod-io/openvscode-server), run VS Code on a remote machine with access through a modern web browser from any device, anywhere. Available as [services.openvscode-server](#opt-services.openvscode-server.enable). -- [mmsd](https://gitlab.com/kop316/mmsd), a lower level daemon that transmits and receives MMSes. Available as [services.mmsd](#opt-services.mmsd.enable). +- [peroxide](https://github.com/ljanyst/peroxide), a fork of the official [ProtonMail bridge](https://github.com/ProtonMail/proton-bridge) that aims to be similar to [Hydroxide](https://github.com/emersion/hydroxide). Available as [services.peroxide](#opt-services.peroxide.enable). -- [QDMR](https://dm3mat.darc.de/qdmr/), a GUI application and command line tool for programming DMR radios [programs.qdmr](#opt-programs.qdmr.enable) +- [photoprism](https://photoprism.app/), a AI-powered photos app for the decentralized web. Available as [services.photoprism](options.html#opt-services.photoprism.enable). -- [keyd](https://github.com/rvaiya/keyd), a key remapping daemon for linux. Available as [services.keyd](#opt-services.keyd.enable). +- [Pixelfed](https://pixelfed.org/), an Instagram-like ActivityPub server. Available as [services.pixelfed](options.html#opt-services.pixelfed.enable). -- [consul-template](https://github.com/hashicorp/consul-template/), a template rendering, notifier, and supervisor for HashiCorp Consul and Vault data. Available as [services.consul-template](#opt-services.consul-template.instances). +- [PufferPanel](https://pufferpanel.com), a game server management panel designed to be easy to use. Available as [services.pufferpanel](#opt-services.pufferpanel.enable). -- [vault-agent](https://developer.hashicorp.com/vault/docs/agent), a template rendering and API auth proxy for HashiCorp Vault, similar to `consul-template`. Available as [services.vault-agent](#opt-services.vault-agent.instances). +- [QDMR](https://dm3mat.darc.de/qdmr/), a GUI application and command line tool for programming DMR radios [programs.qdmr](#opt-programs.qdmr.enable). -- [trippy](https://github.com/fujiapple852/trippy), a network diagnostic tool. Available as [programs.trippy](#opt-programs.trippy.enable). +- [readarr](https://github.com/Readarr/Readarr), book manager and automation (Sonarr for ebooks). Available as [services.readarr](options.html#opt-services.readarr.enable). -- [v2rayA](https://v2raya.org), a Linux web GUI client of Project V which supports V2Ray, Xray, SS, SSR, Trojan and Pingtunnel. Available as [services.v2raya](options.html#opt-services.v2raya.enable). +- [ReGreet](https://github.com/rharish101/ReGreet), a clean and customizable greeter for greetd. Available as [programs.regreet](#opt-programs.regreet.enable). - [rshim](https://github.com/Mellanox/rshim-user-space), the user-space rshim driver for the BlueField SoC. Available as [services.rshim](options.html#opt-services.rshim.enable). -- [wstunnel](https://github.com/erebe/wstunnel), a proxy tunnelling arbitrary TCP or UDP traffic through a WebSocket connection. Instances may be configured via [services.wstunnel](options.html#opt-services.wstunnel.enable). - -- [ulogd](https://www.netfilter.org/projects/ulogd/index.html), a userspace logging daemon for netfilter/iptables related logging. Available as [services.ulogd](options.html#opt-services.ulogd.enable). +- [SFTPGo](https://github.com/drakkan/sftpgo), a fully featured and highly configurable SFTP server with optional HTTP/S, FTP/S and WebDAV support. Available as [services.sftpgo](options.html#opt-services.sftpgo.enable). -- [PufferPanel](https://pufferpanel.com), game server management panel designed to be easy to use. Available as [services.pufferpanel](#opt-services.pufferpanel.enable). +- [sharing](https://github.com/parvardegr/sharing), a command-line tool to share directories and files from the CLI to iOS and Android devices without the need of an extra client app. Available as [programs.sharing](#opt-programs.sharing.enable). -- [jellyseerr](https://github.com/Fallenbagel/jellyseerr), a web-based requests manager for Jellyfin, forked from Overseerr. Available as [services.jellyseerr](#opt-services.jellyseerr.enable). +- [sniffnet](https://github.com/GyulyVGC/sniffnet), an application to monitor your network traffic. Available as [programs.sniffnet](#opt-programs.sniffnet.enable). - [stargazer](https://sr.ht/~zethra/stargazer/), a fast and easy to use Gemini server. Available as [services.stargazer](#opt-services.stargazer.enable). -- [sniffnet](https://github.com/GyulyVGC/sniffnet), an application to monitor your network traffic. Available as [programs.sniffnet](#opt-programs.sniffnet.enable). +- [stevenblack-blocklist](https://github.com/StevenBlack/hosts), a unified hosts file with base extensions for blocking unwanted websites. Available as [networking.stevenblack](options.html#opt-networking.stevenblack.enable). -- [photoprism](https://photoprism.app/), a AI-Powered Photos App for the Decentralized Web. Available as [services.photoprism](options.html#opt-services.photoprism.enable). +- [systemd-repart](https://www.freedesktop.org/software/systemd/man/systemd-repart.service.html), grow and add partitions to a partition table. Available as [systemd.repart](options.html#opt-systemd.repart) and [boot.initrd.systemd.repart](options.html#opt-boot.initrd.systemd.repart) -- [alice-lg](github.com/alice-lg/alice-lg), a looking-glass for BGP sessions. Available as [services.alice-lg](#opt-services.alice-lg.enable). +- [trippy](https://github.com/fujiapple852/trippy), a network diagnostic tool. Available as [programs.trippy](#opt-programs.trippy.enable). -- [birdwatcher](github.com/alice-lg/birdwatcher), a small HTTP server meant to provide an API defined by Barry O'Donovan's birds-eye to the BIRD internet routing daemon. Available as [services.birdwatcher](#opt-services.birdwatcher.enable). +- [tts](https://github.com/coqui-ai/TTS), a battle-tested deep learning toolkit for Text-to-Speech. Multiple servers may be configured below [services.tts.servers](#opt-services.tts.servers). -- [peroxide](https://github.com/ljanyst/peroxide), a fork of the official [ProtonMail bridge](https://github.com/ProtonMail/proton-bridge) that aims to be similar to [Hydroxide](https://github.com/emersion/hydroxide). Available as [services.peroxide](#opt-services.peroxide.enable). +- [ulogd](https://www.netfilter.org/projects/ulogd/index.html), a userspace logging daemon for netfilter/iptables related logging. Available as [services.ulogd](options.html#opt-services.ulogd.enable). -- [autosuspend](https://github.com/languitar/autosuspend), a python daemon that suspends a system if certain conditions are met, or not met. +- [v2rayA](https://v2raya.org), a Linux web GUI client of Project V which supports V2Ray, Xray, SS, SSR, Trojan and Pingtunnel. Available as [services.v2raya](options.html#opt-services.v2raya.enable). -- [sharing](https://github.com/parvardegr/sharing), a command-line tool to share directories and files from the CLI to iOS and Android devices without the need of an extra client app. Available as [programs.sharing](#opt-programs.sharing.enable). +- [v4l2-relayd](https://git.launchpad.net/v4l2-relayd), a streaming relay for v4l2loopback using gstreamer. Available as [services.v4l2-relayd](#opt-services.v4l2-relayd.instances._name_.enable). -- [nimdow](https://github.com/avahe-kellenberger/nimdow), a window manager written in Nim, inspired by dwm. +- [vault-agent](https://developer.hashicorp.com/vault/docs/agent), a template renderer and API auth proxy for HashiCorp Vault, similar to `consul-template`. Available as [services.vault-agent](#opt-services.vault-agent.instances). -- [trurl](https://github.com/curl/trurl), a command line tool for URL parsing and manipulation. +- [webhook](https://github.com/adnanh/webhook), a lightweight webhook server. Available as [services.webhook](#opt-services.webhook.enable). - [wgautomesh](https://git.deuxfleurs.fr/Deuxfleurs/wgautomesh), a simple utility to help connect wireguard nodes together in a full mesh topology. Available as [services.wgautomesh](options.html#opt-services.wgautomesh.enable). -- [woodpecker-agents](https://woodpecker-ci.org/), a simple CI engine with great extensibility. Available as [services.woodpecker-agents](#opt-services.woodpecker-agents.agents._name_.enable). - -- [woodpecker-server](https://woodpecker-ci.org/), a simple CI engine with great extensibility. Available as [services.woodpecker-server](#opt-services.woodpecker-server.enable). - -- [lldap](https://github.com/lldap/lldap), a lightweight authentication server that provides an opinionated, simplified LDAP interface for authentication. Available as [services.lldap](#opt-services.lldap.enable). +- [woodpecker](https://woodpecker-ci.org/), a simple CI engine with great extensibility. Available as [services.woodpecker-server](#opt-services.woodpecker-server.enable) and [services.woodpecker-agents](#opt-services.woodpecker-agents.agents._name_.enable). -- [ReGreet](https://github.com/rharish101/ReGreet), a clean and customizable greeter for greetd. Available as [programs.regreet](#opt-programs.regreet.enable). - -- [v4l2-relayd](https://git.launchpad.net/v4l2-relayd), a streaming relay for v4l2loopback using gstreamer. Available as [services.v4l2-relayd](#opt-services.v4l2-relayd.instances._name_.enable). - -- [hardware.ipu6](#opt-hardware.ipu6.enable) adds support for ipu6 based webcams on intel tiger lake and alder lake. - -- [ivpn](https://www.ivpn.net/), a secure, private VPN with fast WireGuard connections. Available as [services.ivpn](#opt-services.ivpn.enable). - -- [openvscode-server](https://github.com/gitpod-io/openvscode-server), run VS Code on a remote machine with access through a modern web browser from any device, anywhere. Available as [services.openvscode-server](#opt-services.openvscode-server.enable). +- [wstunnel](https://github.com/erebe/wstunnel), a proxy tunnelling arbitrary TCP or UDP traffic through a WebSocket connection. Instances may be configured via [services.wstunnel](options.html#opt-services.wstunnel.enable). ## Backward Incompatibilities {#sec-release-23.05-incompatibilities} - - -- `carnix` and `cratesIO` has been removed due to being unmaintained, use alternatives such as [naersk](https://github.com/nix-community/naersk) and [crate2nix](https://github.com/kolloch/crate2nix) instead. - - `services.asusd` configuration now uses strings instead of structured configuration, as upstream switched to the [RON](https://github.com/ron-rs/ron) configuration format. Support for structured configuration may return when [RON](https://github.com/ron-rs/ron) generation is implemented in nixpkgs. -- `checkInputs` have been renamed to `nativeCheckInputs`, because they behave the same as `nativeBuildInputs` when `doCheck` is set. `checkInputs` now denote a new type of dependencies, added to `buildInputs` when `doCheck` is set. As a rule of thumb, `nativeCheckInputs` are tools on `$PATH` used during the tests, and `checkInputs` are libraries which are linked to executables built as part of the tests. Similarly, `installCheckInputs` are renamed to `nativeInstallCheckInputs`, corresponding to `nativeBuildInputs`, and `installCheckInputs` are a new type of dependencies added to `buildInputs` when `doInstallCheck` is set. (Note that this change will not cause breakage to derivations with `strictDeps` unset, which are most packages except python, rust, ocaml and go packages). +- `borgbackup` module now has an option for inhibiting system sleep while backups are running, defaulting to off (not inhibiting sleep), available as [`services.borgbackup.jobs..inhibitsSleep`](#opt-services.borgbackup.jobs._name_.inhibitsSleep). -- `buildDunePackage` now defaults to `strictDeps = true` which means that any library should go into `buildInputs` or `checkInputs`. Any executable that is run on the building machine should go into `nativeBuildInputs` or `nativeCheckInputs` respectively. Example of executables are `ocaml`, `findlib` and `menhir`. PPXs are libraries which are built by dune and should therefore not go into `nativeBuildInputs`. +- The `openssh` client now comes with the `~C` escape sequence disabled by default. It can be re-enabled by setting `EnableEscapeCommandline yes` -- `borgbackup` module now has an option for inhibiting system sleep while backups are running, defaulting to off (not inhibiting sleep), available as [`services.borgbackup.jobs..inhibitsSleep`](#opt-services.borgbackup.jobs._name_.inhibitsSleep). +- The `programs.ssh` client module does not read `/etc/ssh/ssh_known_hosts2` anymore, since this location is [deprecated since 2001](https://marc.info/?l=openssh-unix-dev&m=100508718416162&w=2). -- The `ssh` client tool now disables the `~C` escape sequence by default. This can be re-enabled by setting `EnableEscapeCommandline yes` +- The `services.openssh` server module does not read `~/.ssh/authorized_keys2` anymore, since this location is [deprecated since 2001](https://marc.info/?l=openssh-unix-dev&m=100508718416162&w=2). -- Many `services.syncthing` options have been moved to `services.syncthing.settings`, as part of [RFC 42](https://github.com/NixOS/rfcs/pull/42)'s implementation, see [#226088](https://github.com/NixOS/nixpkgs/pull/226088). +- MAC-then-encrypt algorithms were removed from the default selection of `services.openssh.settings.Macs`. If you still require these [MACs](https://en.wikipedia.org/wiki/Message_authentication_code), for example when you are relying on libssh2 (e.g. VLC) or the SSH library shipped on the iPhone, you can re-add them like this: -- The `ssh` module does not read `/etc/ssh/ssh_known_hosts2` anymore since this location is [deprecated since 2001](https://marc.info/?l=openssh-unix-dev&m=100508718416162&w=2). + ```nix + services.openssh.settings.Macs = [ + "hmac-sha2-512" + "hmac-sha2-256" + "umac-128@openssh.com" + }; + ``` -- The openssh module does not read `~/.ssh/authorized_keys2` anymore since this location is [deprecated since 2001](https://marc.info/?l=openssh-unix-dev&m=100508718416162&w=2). +- Many `services.syncthing` options have been moved to `services.syncthing.settings`, as part of [RFC 42](https://github.com/NixOS/rfcs/pull/42)'s implementation, see [#226088](https://github.com/NixOS/nixpkgs/pull/226088). - `podman` now uses the `netavark` network stack. Users will need to delete all of their local containers, images, volumes, etc, by running `podman system reset --force` once before upgrading their systems. - `git-bug` has been updated to at least version 0.8.0, which includes backwards incompatible changes. The `git-bug-migration` package can be used to upgrade existing repositories. -- `graylog` has been updated to version 5, which can not be upgraded directly from the previously packaged version 3.3. If you had installed the previously packaged version 3.3, please follow the [upgrade path](https://go2docs.graylog.org/5-0/upgrading_graylog/upgrade_path.htm) from 3.3 to 4.0 to 4.3 to 5.0. +- `graylog` has been updated to version 5, which can not be updated directly from the previously packaged version 3.3. If you had installed the previously packaged version 3.3, please follow the [upgrade path](https://go2docs.graylog.org/5-0/upgrading_graylog/upgrade_path.htm) from 3.3 to 4.0 to 4.3 to 5.0. + +- `buildFHSUserEnv` is now called `buildFHSEnv` and uses FlatPak's Bubblewrap sandboxing tool rather than Nixpkgs' own chrootenv. The old chrootenv-based implemenation is still available via `buildFHSEnvChrootenv` but is considered deprecated and will be removed when the remaining uses inside Nixpkgs have been migrated. If your FHSEnv-wrapped application misbehaves when using the new bubblewrap implementation, please create an issue in Nixpkgs. + - `buildFHSUserEnv` is now called `buildFHSEnv` and uses FlatPak's Bubblewrap sandboxing tool rather than Nixpkgs' own chrootenv. The old chrootenv-based implemenation is still available via `buildFHSEnvChrootenv` but is considered deprecated and will be removed when the remaining uses inside Nixpkgs have been migrated. If your FHSEnv-wrapped application misbehaves when using the new bubblewrap implementation, please create an issue in Nixpkgs. @@ -202,16 +208,16 @@ In addition to numerous new and upgraded packages, this release has the followin - `keepassx` and `keepassx2` have been removed, due to upstream [stopping development](https://www.keepassx.org/index.html%3Fp=636.html). Consider [KeePassXC](https://keepassxc.org) as a maintained alternative. -- The [services.kubo.settings](#opt-services.kubo.settings) option is now no longer stateful. If you changed any of the options in [services.kubo.settings](#opt-services.kubo.settings) in the past and then removed them from your NixOS configuration again, those changes are still in your Kubo configuration file but will now be reset to the default. If you're unsure, you may want to make a backup of your configuration file (probably /var/lib/ipfs/config) and compare after the update. +- The [services.kubo.settings](#opt-services.kubo.settings) option is now no longer stateful. If you changed any of the options in [services.kubo.settings](#opt-services.kubo.settings) in the past and then removed them from your NixOS configuration again, those changes are still in your Kubo configuration file but will now be reset to the default. If you're unsure, you may want to make a backup of your configuration file (probably `/var/lib/ipfs/config`) and compare after the update. - The Kubo HTTP API will no longer listen on localhost and will instead only listen on a Unix domain socket by default. Read the [services.kubo.settings.Addresses.API](#opt-services.kubo.settings.Addresses.API) option description for more information. - The EC2 image module no longer fetches instance metadata in stage-1. This results in a significantly smaller initramfs, since network drivers no longer need to be included, and faster boots, since metadata fetching can happen in parallel with startup of other services. This breaks services which rely on metadata being present by the time stage-2 is entered. Anything which reads EC2 metadata from `/etc/ec2-metadata` should now have an `after` dependency on `fetch-ec2-metadata.service` -- The mailman service now defaults to using a randomly generated REST API password instead of a hardcoded one. +- The mailman service now defaults to using a randomly generated REST API password instead of a hard-coded one. -- `minio` removed support for its legacy filesystem backend in [RELEASE.2022-10-29T06-21-33Z](https://github.com/minio/minio/releases/tag/RELEASE.2022-10-29T06-21-33Z). This means if your storage was created with the old format, minio will no longer start. Unfortunately minio doesn't provide a an automatic migration, they only provide [instructions how to manually convert the node](https://min.io/docs/minio/windows/operations/install-deploy-manage/migrate-fs-gateway.html). To facilitate this migration we keep around the last version that still supports the old filesystem backend as `minio_legacy_fs`. Use it via `services.minio.package = minio_legacy_fs;` to export your data before switching to the new version. See the corresponding [issue](https://github.com/NixOS/nixpkgs/issues/199318) for more details. +- `minio` removed support for its legacy filesystem backend in [RELEASE.2022-10-29T06-21-33Z](https://github.com/minio/minio/releases/tag/RELEASE.2022-10-29T06-21-33Z). This means if your storage was created with the old format, minio will no longer start. Unfortunately, minio doesn't provide an automatic migration, they only provide [instructions how to manually convert the node](https://min.io/docs/minio/windows/operations/install-deploy-manage/migrate-fs-gateway.html). To facilitate this migration, we keep around the last version that still supports the old filesystem backend as `minio_legacy_fs`. Use it via `services.minio.package = minio_legacy_fs;` to export your data before switching to the new version. See the corresponding [issue](https://github.com/NixOS/nixpkgs/issues/199318) for more details. - `services.sourcehut.dispatch` and the corresponding package (`sourcehut.dispatchsrht`) have been removed due to [upstream deprecation](https://sourcehut.org/blog/2022-08-01-dispatch-deprecation-plans/). @@ -235,15 +241,20 @@ In addition to numerous new and upgraded packages, this release has the followin }; ``` -- The [services.snapserver.openFirewall](#opt-services.snapserver.openFirewall) module option default value has been changed from `true` to `false`. You will need to explicitly set this option to `true`, or configure your firewall. +- The default module options for [services.snapserver.openFirewall](#opt-services.snapserver.openFirewall), [services.tmate-ssh-server.openFirewall](#opt-services.tmate-ssh-server.openFirewall) and [services.unifi-video.openFirewall](#opt-services.unifi-video.openFirewall) have been changed from `true` to `false`. You will need to explicitly set this option to `true`, or configure your firewall. -- The [services.tmate-ssh-server.openFirewall](#opt-services.tmate-ssh-server.openFirewall) module option default value has been changed from `true` to `false`. You will need to explicitly set this option to `true`, or configure your firewall. +- The option `i18n.inputMethod.fcitx5.enableRimeData` has been removed. Default RIME data is now included in `fcitx5-rime` by default, and can be customized using -- The [services.unifi-video.openFirewall](#opt-services.unifi-video.openFirewall) module option default value has been changed from `true` to `false`. You will need to explicitly set this option to `true`, or configure your firewall. - -- The option `i18n.inputMethod.fcitx5.enableRimeData` has been removed. Default RIME data is now included in `fcitx5-rime` by default, and can be customized using `fcitx5-rime.override { rimeDataPkgs = [ pkgs.rime-data, package2, ... ]; }` + ```nix + fcitx5-rime.override { + rimeDataPkgs = [ + pkgs.rime-data + # ... + ]; + } + ``` -- The udev hwdb.bin file is now built with systemd-hwdb rather than the [deprecated "udevadm hwdb"](https://github.com/systemd/systemd/pull/25714). This may impact mappings where the same key is defined in multiple matching entries. The updated behavior will select the latest definition in case of conflict. In general, this should be a positive change, as the hwdb source files are designed with this ordering in mind. As an example, the mapping of the HP Dev One keyboard scan code for "mute mic" is corrected by this update. This change may impact users who have worked-around previously incorrect mappings. +- The `udev` hwdb.bin file is now built with systemd-hwdb rather than the [deprecated "udevadm hwdb"](https://github.com/systemd/systemd/pull/25714). This may impact mappings where the same key is defined in multiple matching entries. The updated behavior will select the latest definition in case of conflict. In general, this should be a positive change, as the hwdb source files are designed with this ordering in mind. As an example, the mapping of the HP Dev One keyboard scan code for "mute mic" is corrected by this update. This change may impact users who have worked-around previously incorrect mappings. - Kime has been updated from 2.5.6 to 3.0.2 and the `i18n.inputMethod.kime.config` option has been removed. Users should use `daemonModules`, `iconColor`, and `extraConfig` options under `i18n.inputMethod.kime` instead. @@ -251,15 +262,15 @@ In addition to numerous new and upgraded packages, this release has the followin - `i3status-rust` has been updated from 0.22.0 to 0.30.5, and this brings many changes to its configuration format. Additional information can be found [here](https://github.com/greshake/i3status-rust/blob/v0.30.0/NEWS.md). -- The `wordpress` derivation no longer contains any builtin plugins or themes. If you need them you have to add them back to prevent your site from breaking. You can find them in `wordpressPackages.{plugins,themes}`. +- The `wordpress` derivation no longer contains any built-in plugins or themes. If you need them, you have to add them back to prevent your site from breaking. You can find them in `wordpressPackages.{plugins,themes}`. - `llvmPackages_rocm.llvm` will not contain `clang` or `compiler-rt`. `llvmPackages_rocm.clang` will not contain `llvm`. `llvmPackages_rocm.clangNoCompilerRt` has been removed in favor of using `llvmPackages_rocm.clang-unwrapped`. -- `services.xserver.desktopManager.plasma5.excludePackages` has been moved to `environment.plasma5.excludePackages`, for consistency with other Desktop Environments +- `services.xserver.desktopManager.plasma5.excludePackages` has been moved to `environment.plasma5.excludePackages`, for consistency with other Desktop Environments. -- The EC2 image module previously detected and automatically mounted ext3-formatted instance store devices and partitions in stage-1 (initramfs), storing `/tmp` on the first discovered device. This behaviour, which only catered to very specific use cases and could not be disabled, has been removed. Users relying on this should provide their own implementation, and probably use ext4 and perform the mount in stage-2. +- `teleport` has been updated from major version 10 to major version 12. Please see upstream [upgrade instructions](https://goteleport.com/docs/setup/operations/upgrading/) and release notes for versions [11](https://goteleport.com/docs/changelog/#1100) and [12](https://goteleport.com/docs/changelog/#1201). Note that Teleport does not officially support upgrades across more than one major version at a time. If you're running Teleport server components, it is recommended to first upgrade to an intermediate 11.x version by setting `services.teleport.package = pkgs.teleport_11`. Afterwards, this option can be removed to upgrade to the default version (12). -- `teleport` has been upgraded from major version 10 to major version 12. Please see upstream [upgrade instructions](https://goteleport.com/docs/setup/operations/upgrading/) and release notes for versions [11](https://goteleport.com/docs/changelog/#1100) and [12](https://goteleport.com/docs/changelog/#1201). Note that Teleport does not officially support upgrades across more than one major version at a time. If you're running Teleport server components, it is recommended to first upgrade to an intermediate 11.x version by setting `services.teleport.package = pkgs.teleport_11`. Afterwards, this option can be removed to upgrade to the default version (12). +- The EC2 image module previously detected and automatically mounted ext3-formatted instance store devices and partitions in stage-1 (initramfs), storing `/tmp` on the first discovered device. This behaviour, which only catered to very specific use cases and could not be disabled, has been removed. Users relying on this should provide their own implementation, and probably use ext4 and perform the mount in stage-2. - The EC2 image module previously detected and activated swap-formatted instance store devices and partitions in stage-1 (initramfs). This behaviour has been removed. Users relying on this should provide their own implementation. @@ -267,12 +278,6 @@ In addition to numerous new and upgraded packages, this release has the followin - `albert` has been updated from 0.17.6 to 0.20.13, and 0.18.0 changed the config format and many plugins ([changelog for 0.18.0](https://github.com/albertlauncher/albert/blob/v0.18.0/CHANGELOG.md)) -- Calling `makeSetupHook` without passing a `name` argument is deprecated. - -- Top-level buildPlatform,hostPlatform,targetPlatform have been deprecated, use stdenv.X instead. - -- `lib.systems.examples.ghcjs` and consequently `pkgsCross.ghcjs` now use the target triplet `javascript-unknown-ghcjs` instead of `js-unknown-ghcjs`. This has been done to match an [upstream decision](https://gitlab.haskell.org/ghc/ghc/-/commit/6636b670233522f01d002c9b97827d00289dbf5c) to follow Cabal's platform naming more closely. Nixpkgs will also reject `js` as an architecture name. - - `dokuwiki` has been updated from 2023-07-31a (Igor) to 2023-04-04 (Jack Jackrum), which has [completely removed](https://www.dokuwiki.org/changes#release_2023-04-04_jack_jackrum) the options to embed HTML and PHP for security reasons. The [htmlok plugin](https://www.dokuwiki.org/plugin:htmlok) can be used to regain this functionality. - The old unsupported version 6.x of the ELK-stack and Elastic beats have been removed. Use OpenSearch instead. @@ -283,10 +288,6 @@ In addition to numerous new and upgraded packages, this release has the followin - The [services.wordpress.sites.<name>.plugins](#opt-services.wordpress.sites._name_.plugins) and [services.wordpress.sites.<name>.themes](#opt-services.wordpress.sites._name_.themes) options have been converted from sets to attribute sets to allow for consumers to specify explicit install paths via attribute name. -- [`services.nextcloud.database.createLocally`](#opt-services.nextcloud.database.createLocally) now uses socket authentication and is no longer compatible with password authentication. - - If you want the module to manage the database for you, unset [`services.nextcloud.config.dbpassFile`](#opt-services.nextcloud.config.dbpassFile) (and [`services.nextcloud.config.dbhost`](#opt-services.nextcloud.config.dbhost), if it's set). - - If you want to use password authentication **and** create the database locally, you will have to use [`services.mysql`](#opt-services.mysql.enable) to set it up. - - `protonmail-bridge` package has been updated to major version 3. - Nebula now runs as a system user and group created for each nebula network, using the `CAP_NET_ADMIN` ambient capability on launch rather than starting as root. Ensure that any files each Nebula instance needs to access are owned by the correct user and group, by default `nebula-${networkName}`. @@ -295,12 +296,8 @@ In addition to numerous new and upgraded packages, this release has the followin - In `mastodon` it is now necessary to specify location of file with `PostgreSQL` database password. In `services.mastodon.database.passwordFile` parameter default value `/var/lib/mastodon/secrets/db-password` has been changed to `null`. -- The `--target-host` and `--build-host` options of `nixos-rebuild` no longer treat the `localhost` value specially – to build on/deploy to local machine, omit the relevant flag. - - The `nix.readOnlyStore` option has been renamed to `boot.readOnlyNixStore` to clarify that it configures the NixOS boot process, not the Nix daemon. -- Deprecated `xlibsWrapper` transitional package has been removed in favour of direct use of its constituents: `xorg.libX11`, `freetype` and others. - - The latest available version of Nextcloud is v26 (available as `pkgs.nextcloud26`) which uses PHP 8.2 as interpreter by default. The installation logic is as follows: - If `system.stateVersion` is >=23.05, `pkgs.nextcloud26` will be installed by default. - If `system.stateVersion` is >=22.11, `pkgs.nextcloud25` will be installed by default. @@ -314,7 +311,7 @@ In addition to numerous new and upgraded packages, this release has the followin [upstream's release notes](https://github.com/iputils/iputils/releases/tag/20221126) for more details and available replacements. -- The ppp plugin `rp-pppoe.so` has been renamed to `pppoe.so` in ppp 2.4.9. Starting from ppp 2.5.0, there is no longer a alias for backwards compatibility. Configurations that use this plugin must be updated accordingly from `plugin rp-pppoe.so` to `plugin pppoe.so`. See [upstream change](https://github.com/ppp-project/ppp/commit/610a7bd76eb1f99f22317541b35001b1e24877ed). +- The ppp plugin `rp-pppoe.so` has been renamed to `pppoe.so` in ppp 2.4.9. Starting from ppp 2.5.0, there is no longer an alias for backwards compatibility. Configurations that use this plugin must be updated accordingly from `plugin rp-pppoe.so` to `plugin pppoe.so`. See [upstream change](https://github.com/ppp-project/ppp/commit/610a7bd76eb1f99f22317541b35001b1e24877ed). - [services.xserver.videoDrivers](options.html#opt-services.xserver.videoDrivers) now defaults to the `modesetting` driver over device-specific ones. The `radeon`, `amdgpu` and `nouveau` drivers are still available, but effectively unmaintained and not recommended for use. @@ -361,14 +358,6 @@ In addition to numerous new and upgraded packages, this release has the followin -- `vim_configurable` has been renamed to `vim-full` to avoid confusion: `vim-full`'s build-time features are configurable, but both `vim` and `vim-full` are _customizable_ (in the sense of user configuration, like vimrc). - -- Pantheon now defaults to Mutter 43 and GNOME settings daemon 43, all Pantheon packages are now tracking elementary OS 7 updates. - -- The module for the application firewall `opensnitch` got the ability to configure rules. Available as [services.opensnitch.rules](#opt-services.opensnitch.rules) - -- The module `usbmuxd` now has the ability to change the package used by the daemon. In case you're experiencing issues with `usbmuxd` you can try an alternative program like `usbmuxd2`. Available as [services.usbmuxd.package](#opt-services.usbmuxd.package) - - A few openssh options have been moved from extraConfig to the new freeform option `settings` and renamed as follows: - `services.openssh.forwardX11` to `services.openssh.settings.X11Forwarding` - `services.openssh.kbdInteractiveAuthentication` -> `services.openssh.settings.KbdInteractiveAuthentication` @@ -381,17 +370,20 @@ In addition to numerous new and upgraded packages, this release has the followin - `services.openssh.ciphers` to `services.openssh.settings.Ciphers` - `services.openssh.gatewayPorts` to `services.openssh.settings.GatewayPorts` -- `netbox` was updated to 3.5. NixOS' `services.netbox.package` still defaults to 3.3 if `stateVersion` is earlier than 23.05. Please review upstream's breaking changes [for 3.4.0](https://github.com/netbox-community/netbox/releases/tag/v3.4.0) and [for 3.5.0](https://github.com/netbox-community/netbox/releases/tag/v3.5.0), and upgrade NetBox by changing `services.netbox.package`. Database migrations will be run automatically. -- `services.netbox` now support RFC42-style options, through `services.netbox.settings`. +- `vim_configurable` has been renamed to `vim-full` to avoid confusion: `vim-full`'s build-time features are configurable, but both `vim` and `vim-full` are _customizable_ (in the sense of user configuration, like vimrc). -- `services.mastodon` gained a tootctl wrapped named `mastodon-tootctl` similar to `nextcloud-occ` which can be executed from any user and switches to the configured mastodon user with sudo and sources the environment variables. +- Pantheon now defaults to Mutter 43 and GNOME settings daemon 43, all Pantheon packages are now tracking elementary OS 7 updates. -- DocBook option documentation, which has been deprecated since 22.11, will now cause a warning when documentation is built. Out-of-tree modules should migrate to using CommonMark documentation as outlined in [](#sec-option-declarations) to silence this warning. +- The module for the application firewall `opensnitch` got the ability to configure rules. Available as [services.opensnitch.rules](#opt-services.opensnitch.rules) - DocBook option documentation support will be removed in the next release and CommonMark will become the default. DocBook option documentation that has not been migrated until then will no longer render properly or cause errors. +- The module `usbmuxd` now has the ability to change the package used by the daemon. In case you're experiencing issues with `usbmuxd` you can try an alternative program like `usbmuxd2`. Available as [services.usbmuxd.package](#opt-services.usbmuxd.package) + +- `netbox` was updated to 3.5. NixOS' `services.netbox.package` still defaults to 3.3 if `stateVersion` is earlier than 23.05. Please review upstream's breaking changes [for 3.4.0](https://github.com/netbox-community/netbox/releases/tag/v3.4.0) and [for 3.5.0](https://github.com/netbox-community/netbox/releases/tag/v3.5.0), and upgrade NetBox by changing `services.netbox.package`. Database migrations will be run automatically. + +- `services.netbox` now support RFC42-style options, through `services.netbox.settings`. -- NixOS now defaults to using nsncd (a non-caching reimplementation in Rust) as NSS lookup dispatcher, instead of the buggy and deprecated glibc-provided nscd. If you need to switch back, set `services.nscd.enableNsncd = false`, but please open an issue in nixpkgs so your issue can be fixed. +- `services.mastodon` gained a tootctl wrapped named `mastodon-tootctl` similar to `nextcloud-occ` which can be executed from any user and switches to the configured mastodon user with sudo and sources the environment variables. - `services.borgmatic` now allows for multiple configurations, placed in `/etc/borgmatic.d/`, you can define them with `services.borgmatic.configurations`. @@ -410,8 +402,6 @@ In addition to numerous new and upgraded packages, this release has the followin `services.dnsmasq.extraConfig` will be deprecated when NixOS 22.11 reaches end of life. -- `kube3d` has now been renamed to `k3d` since the 3d editor that originally took that name has been dropped from nixpkgs. `kube3d` will continue to work as an alias for now. - - The `dokuwiki` service is now configured via `services.dokuwiki.sites..settings` attribute set; `extraConfig` has been removed. The `{aclUse,superUser,disableActions}` attributes have been renamed accordingly. `pluginsConfig` now only accepts an attribute set of booleans. Passing plain PHP is no longer possible. @@ -434,106 +424,87 @@ In addition to numerous new and upgraded packages, this release has the followin If undesired, the old behavior can be restored by overriding the builders with `{ installDocumentation = false; }`. -- The new option `networking.nftables.checkRuleset` controls whether the ruleset is checked for syntax or not during build. It is `true` by default. The check might fail because it is in a sandbox environment. To circumvent this, the ruleset file can be edited using the `networking.nftables.preCheckRuleset` option. +- The nftables module now validates its ruleset at build time. The new `networking.nftables.checkRuleset` option allows disabling this check, which may fail when rules have very specific requirements, that the sandbox environment, by default, will not cover. The `networking.nftables.preCheckRuleset` option can be used to prepare the environment before the checks are run. + +- The `services.mastodon` module now supports connection to a remote `PostgreSQL` database. -- `mastodon` now supports connection to a remote `PostgreSQL` database. +- [`services.nextcloud.database.createLocally`](#opt-services.nextcloud.database.createLocally) now uses socket authentication and is no longer compatible with password authentication. + - If you want the module to manage the database for you, unset [`services.nextcloud.config.dbpassFile`](#opt-services.nextcloud.config.dbpassFile) (and [`services.nextcloud.config.dbhost`](#opt-services.nextcloud.config.dbhost), if it's set). + - If you want to use password authentication **and** create the database locally, you will have to use [`services.mysql`](#opt-services.mysql.enable) to set it up. -- `nextcloud` has an option to enable SSE-C in S3. +- [`services.nextcloud.config.objectstore.s3.sseCKeyFile`](#opt-services.nextcloud.config.objectstore.s3.sseCKeyFile) is a new option to enable server-side encryption with customer provided keys (SSE-C) for your S3 in Nextcloud. -- NixOS swap partitions with random encryption can now control the sector size, cipher, and key size used to setup the plain encryption device over the - underlying block device rather than allowing them to be determined by `cryptsetup(8)`. One can use these features like so: +- NixOS swap partitions with random encryption can now control the sector size, cipher, and key size used to set up the plain encryption device over the underlying block device rather than allowing them to be determined by `cryptsetup(8)`. One can use these features like so: ```nix - { - swapDevices = [ - { - device = "/dev/disk/by-partlabel/swapspace"; - - randomEncryption = { - enable = true; - cipher = "aes-xts-plain64"; - keySize = 512; - sectorSize = 4096; - }; - } - ]; - } + swapDevices = [ { + device = "/dev/disk/by-partlabel/swapspace"; + randomEncryption = { + enable = true; + cipher = "aes-xts-plain64"; + keySize = 512; + sectorSize = 4096; + }; + } ]; ``` - New option `security.pam.zfs` to enable unlocking and mounting of encrypted ZFS home dataset at login. -- `services.peertube` now requires you to specify the secret file `secrets.secretsFile`. It can be generated by running `openssl rand -hex 32`. - Before upgrading, read the release notes for PeerTube: - - [Release v5.0.0](https://github.com/Chocobozzz/PeerTube/releases/tag/v5.0.0) - - And backup your data. +- `services.peertube` now requires you to specify the secret file `secrets.secretsFile`. It can be generated by running `openssl rand -hex 32`. Before upgrading, check the release notes for [PeerTube v5.0.0](https://github.com/Chocobozzz/PeerTube/releases/tag/v5.0.0).And backup your data. - `services.chronyd` is now started with additional systemd sandbox/hardening options for better security. -- PostgreSQL has opt-in support for [JIT compilation](https://www.postgresql.org/docs/current/jit-reason.html). It can be enabled like this: +- PostgreSQL has added opt-in support for [JIT compilation](https://www.postgresql.org/docs/current/jit-reason.html). It can be enabled like this: ```nix - { - services.postgresql = { - enable = true; - enableJIT = true; - }; - } + services.postgresql.enableJIT = true; ``` -- `services.netdata` offers a `deadlineBeforeStopSec` option which enable users who have netdata instance that takes time to initialize to not have systemd kill them for no reason. +- `services.netdata` offers a [`services.netdata.deadlineBeforeStopSec`](#opt-services.netdata.deadlineBeforeStopSec) option which will control the deadline (in seconds) after which systemd will consider your netdata instance as dead if it didn't start in the elapsed time. It is helpful when your netdata instance takes longer to start because of a large amount of state or upgrades. -- `services.dhcpcd` service now don't solicit or accept IPv6 Router Advertisements on interfaces that use static IPv6 addresses. - If network uses both IPv6 Unique local addresses (ULA) and global IPv6 address auto-configuration with SLAAC, must add the parameter `networking.dhcpcd.IPv6rs = true;`. +- `services.dhcpcd` service stopped soliciting or accepting IPv6 Router Advertisements on interfaces that use static IPv6 addresses. + If your network provides both IPv6 unique local addresses (ULA) and globally unique addresses (GUA) through autoconfiguration with SLAAC, you must add the parameter `networking.dhcpcd.IPv6rs = true;`. - The module `services.headscale` was refactored to be compliant with [RFC 0042](https://github.com/NixOS/rfcs/blob/master/rfcs/0042-config-option.md). To be precise, this means that the following things have changed: - - Most settings has been migrated under [services.headscale.settings](#opt-services.headscale.settings) which is an attribute-set that + - Most settings have been migrated below [services.headscale.settings](#opt-services.headscale.settings) which is a freeform attribute-set that will be converted into headscale's YAML config format. This means that the configuration from [headscale's example configuration](https://github.com/juanfont/headscale/blob/main/config-example.yaml) can be directly written as attribute-set in Nix within this option. - `services.kubo` now unmounts `ipfsMountDir` and `ipnsMountDir` even if it is killed unexpectedly when `autoMount` is enabled. -- `nixos/lib/make-disk-image.nix` can now mutate EFI variables, run user-provided EFI firmware or variable templates. This is now extensively documented in the NixOS manual. - -- `services.grafana` listens only on localhost by default again. This was changed to upstreams default of `0.0.0.0` by accident in the freeform setting conversion. +- `services.grafana` listens only on localhost by default again. This was changed to the upstream default of `0.0.0.0` by accident in the freeform setting conversion. - Grafana Tempo has been updated to version 2.0. See the [upstream upgrade guide](https://grafana.com/docs/tempo/latest/release-notes/v2-0/#upgrade-considerations) for migration instructions. -- A new `virtualisation.rosetta` module was added to allow running `x86_64` binaries through [Rosetta](https://developer.apple.com/documentation/apple-silicon/about-the-rosetta-translation-environment) inside virtualised NixOS guests on Apple silicon. This feature works by default with the [UTM](https://docs.getutm.app/) virtualisation [package](https://search.nixos.org/packages?channel=unstable&show=utm&from=0&size=1&sort=relevance&type=packages&query=utm). +- A new `virtualisation.rosetta` module was added to allow running `x86_64` binaries through [Rosetta](https://developer.apple.com/documentation/apple-silicon/about-the-rosetta-translation-environment) inside virtualised NixOS guests on Apple Silicon. This feature works by default with the [UTM](https://docs.getutm.app/) virtualisation [package](https://search.nixos.org/packages?channel=23.05&show=utm&from=0&size=1&sort=relevance&type=packages&query=utm). - The new option `users.motdFile` allows configuring a Message Of The Day that can be updated dynamically. - The `root` package is now built with the `"-Dgnuinstall=ON"` CMake flag, making the output conform the `bin` `lib` `share` layout. In this layout, `tutorials` is under `share/doc/ROOT/`; `cmake`, `font`, `icons`, `js` and `macro` under `share/root`; `Makefile.comp` and `Makefile.config` under `etc/root`. -- Enabling global redirect in `services.nginx.virtualHosts` now allows one to add exceptions with the `locations` option. - -- A new option `proxyCachePath` has been added to `services.nginx`. Learn more about proxy_cache_path: . - -- A new option `recommendedBrotliSettings` has been added to `services.nginx`. Learn more about compression in Brotli format [here](https://github.com/google/ngx_brotli/blob/master/README.md). +- There are various new options in the `services.nginx` module: + - Enabling global redirect in `services.nginx.virtualHosts` now allows one to add exceptions with the `locations` option. + - The `proxyCachePath` option has been added to `services.nginx`. It allows configuring the [`proxy_cache_path`](https://nginx.org/en/docs/http/ngx_http_proxy_module.html#proxy_cache_path), that configures the storage path and various other settings for the cache. + - A new option `recommendedBrotliSettings` has been added to `services.nginx`. Learn more about compression in Brotli format [here](https://github.com/google/ngx_brotli/blob/master/README.md). + - `services.nginx.recommendedProxySettings` now removes the `Connection` header preventing clients from closing backend connections. -- Updated recommended settings in `services.nginx.recommendedGzipSettings`: +- The nginx module also received an update to `services.nginx.recommendedGzipSettings`: - Enables gzip compression for only certain proxied requests. - Allow checking and loading of precompressed files. - Updated gzip mime-types. - Increased the minimum length of a response that will be gzipped. -- [Garage](https://garagehq.deuxfleurs.fr/) version is based on [system.stateVersion](options.html#opt-system.stateVersion), existing installations will keep using version 0.7. New installations will use version 0.8. In order to upgrade a Garage cluster, please follow [upstream instructions](https://garagehq.deuxfleurs.fr/documentation/cookbook/upgrading/) and force [services.garage.package](options.html#opt-services.garage.package) or upgrade accordingly [system.stateVersion](options.html#opt-system.stateVersion). +- [Garage](https://garagehq.deuxfleurs.fr/) version is based on [system.stateVersion](options.html#opt-system.stateVersion), existing installations will keep using version 0.7. New installations will use version 0.8. In order to upgrade a Garage cluster, please follow [upstream instructions](https://garagehq.deuxfleurs.fr/documentation/cookbook/upgrading/) and configure [services.garage.package](options.html#opt-services.garage.package). - Nebula now supports the `services.nebula.networks..isRelay` and `services.nebula.networks..relays` configuration options for setting up or allowing traffic relaying. See the [announcement](https://www.defined.net/blog/announcing-relay-support-in-nebula/) for more details about relays. -- `hip` has been separated into `hip`, `hip-common` and `hipcc`. - -- `services.nginx.recommendedProxySettings` now removes the `Connection` header preventing clients from closing backend connections. - - Resilio sync secret keys can now be provided using a secrets file at runtime, preventing these secrets from ending up in the Nix store. -- The `firewall` and `nat` module now has a nftables based implementation. Enable `networking.nftables` to use it. +- The `firewall` and `nat` modules can now optionally rely on an nftables based implementation. Enable `networking.nftables` to use it. - The `services.fwupd` module now allows arbitrary daemon settings to be configured in a structured manner ([`services.fwupd.daemonSettings`](#opt-services.fwupd.daemonSettings)). -- Nixpkgs now uses [IEEE-standard floating point arithmetic](https://github.com/NixOS/nixpkgs/pull/170215) on `powerpc64le-linux`. - - `services.xserver.desktopManager.plasma5.phononBackend` now defaults to vlc according to [upstrean recommendation](https://community.kde.org/Distributions/Packaging_Recommendations#Non-Plasma_packages) - The `zramSwap` is now implemented with `zram-generator`, and the option `zramSwap.numDevices` for using ZRAM devices as general purpose ephemeral block devices has been removed. @@ -544,19 +515,13 @@ In addition to numerous new and upgraded packages, this release has the followin * `apptainer`: From `github.com/apptainer/apptainer`, which is the new repo after renaming. * `singularity`: From `github.com/sylabs/singularity`, which is the fork by Sylabs Inc.. - `programs.singularity` got a new `package` option to specify which package to use. - `singularity-tools.buildImage` got a new input argument `singularity` to specify which package to use. - The new option `programs.singularity.enableFakeroot`, if set to `true`, provides `--fakeroot` support for `apptainer` and `singularity`. -- The `unifi-poller` package and corresponding NixOS module have been renamed to `unpoller` to match upstream. - -- The `rtsp-simple-server` package and corresponding NixOS module have been renamed to `mediamtx` to match upstream. - - The new option `services.tailscale.useRoutingFeatures` controls various settings for using Tailscale features like exit nodes and subnet routers. If you wish to use your machine as an exit node, you can set this setting to `server`, otherwise if you wish to use an exit node you can set this setting to `client`. The strict RPF warning has been removed as the RPF will be loosened automatically based on the value of this setting. -- `openjdk` from version 11 and above is not build with `openjfx` (i.e.: JavaFX) support by default anymore. You can re-enable it by overriding, e.g.: `openjdk11.override { enableJavaFX = true; };`. +- `openjdk` from versioggn 11 and above is not build with `openjfx` (i.e.: JavaFX) support by default anymore. You can re-enable it by overriding, e.g.: `openjdk11.override { enableJavaFX = true; };`. - [Xastir](https://xastir.org/index.php/Main_Page) can now access AX.25 interfaces via the `libax25` package. @@ -566,22 +531,49 @@ In addition to numerous new and upgraded packages, this release has the followin - The option `services.prometheus.exporters.pihole.interval` does not exist anymore and has been removed. -- The option `services.gpsd.device` has been replaced with - `services.gpsd.devices`, which supports multiple devices. +- The option `services.gpsd.device` has been replaced with `services.gpsd.devices`, which supports multiple devices. + +- `k3s` can now be configured with an `EnvironmentFile` for its systemd service, allowing secrets to be provided without ending up in the Nix Store. + +- The `gitea` module options have been moved into a freeform attribute set below `services.gitea.settings`. -- `k3s` can now be configured with an EnvironmentFile for its systemd service, allowing secrets to be provided without ending up in the Nix Store. +- `boot.initrd.luks.device.` has a new `tryEmptyPassphrase` option, this is useful for OEMs who need to install an encrypted disk with a future settable passphrase -- `gitea` module options have been changed to be RFC042 conforming (i.e. some options were moved to be located under `services.gitea.settings`) +- The `bind` module now allows the per-zone `allow-query` setting to be configured (previously it was hard-coded to `any`; it still defaults to `any` to retain compatibility). + +- The option `services.jitsi-videobridge.apis` has been renamed to `colibriRestApi` and turned into a boolean. Setting it to `true` will enable the private rest API, useful for monitoring using `services.prometheus.exporters.jitsi.enable`. Learn more about the API: "[The COLIBRI control interface (/colibri/)](https://github.com/jitsi/jitsi-videobridge/blob/v2.3/doc/rest.md)". -- `boot.initrd.luks.device.` has a new `tryEmptyPassphrase` option, this is useful for OEM's who need to install an encrypted disk with a future settable passphrase +- Booting from a volume managed by the Stratis storage management daemon is now supported. Use `fileSystems..stratis.poolUuid` to configure the pool containing the fs. + +## Nixpkgs internals {#sec-release-23.05-nixpkgs-internals} + +- `buildDunePackage` now defaults to `strictDeps = true` which means that any library should go into `buildInputs` or `checkInputs`. Any executable that is run on the building machine should go into `nativeBuildInputs` or `nativeCheckInputs` respectively. Example of executables are `ocaml`, `findlib` and `menhir`. PPXs are libraries which are built by dune and should therefore not go into `nativeBuildInputs`. + +- `buildFHSUserEnv` is now called `buildFHSEnv` and uses FlatPak's Bubblewrap sandboxing tool rather than Nixpkgs' own chrootenv. The old chrootenv-based implemenation is still available via `buildFHSEnvChrootenv` but is considered deprecated and will be removed when the remaining uses inside Nixpkgs have been migrated. If your FHSEnv-wrapped application misbehaves when using the new bubblewrap implementation, please create an issue in Nixpkgs. + +- Top-level `buildPlatform`, `hostPlatform`, `targetPlatform` have been deprecated, use `stdenv.X` instead. + +- `carnix` and `cratesIO` has been removed due to being unmaintained, use alternatives such as [naersk](https://github.com/nix-community/naersk) and [crate2nix](https://github.com/kolloch/crate2nix) instead. + +- `checkInputs` have been renamed to `nativeCheckInputs`, because they behave the same as `nativeBuildInputs` when `doCheck` is set. `checkInputs` now denote a new type of dependencies, added to `buildInputs` when `doCheck` is set. As a rule of thumb, `nativeCheckInputs` are tools on `$PATH` used during the tests, and `checkInputs` are libraries which are linked to executables built as part of the tests. Similarly, `installCheckInputs` are renamed to `nativeInstallCheckInputs`, corresponding to `nativeBuildInputs`, and `installCheckInputs` are a new type of dependencies added to `buildInputs` when `doInstallCheck` is set. (Note that this change will not cause breakage to derivations with `strictDeps` unset, which are most packages except python, rust, ocaml and go packages). + +- DocBook option documentation, which has been deprecated since 22.11, will now cause a warning when documentation is built. Out-of-tree modules should migrate to using CommonMark documentation as outlined in [](#sec-option-declarations) to silence this warning. + + DocBook option documentation support will be removed in the next release and CommonMark will become the default. DocBook option documentation that has not been migrated until then will no longer render properly or cause errors. + +- `lib.systems.examples.ghcjs` and consequently `pkgsCross.ghcjs` now use the target triplet `javascript-unknown-ghcjs` instead of `js-unknown-ghcjs`. This has been done to match an [upstream decision](https://gitlab.haskell.org/ghc/ghc/-/commit/6636b670233522f01d002c9b97827d00289dbf5c) to follow Cabal's platform naming more closely. Nixpkgs will also reject `js` as an architecture name. - Lisp gained a [manual section](https://nixos.org/manual/nixpkgs/stable/#lisp), documenting a new and backwards incompatible interface. The previous interface will be removed in a future release. -- The `bind` module now allows the per-zone `allow-query` setting to be configured (previously it was hard-coded to `any`; it still defaults to `any` to retain compatibility). +- Calling `makeSetupHook` without passing a `name` argument is deprecated. -- `make-disk-image` handles `contents` arguments that are directories better, fixing a bug where it used to put them in a subdirectory of the intended `target`. +- `nixos/lib/make-disk-image.nix` handles `contents` arguments that are directories better, fixing a bug where it used to put them in a subdirectory of the intended `target`. -- The option `services.jitsi-videobridge.apis` has been renamed to `colibriRestApi` and turned into a boolean. Setting it to `true` will enable the private rest API, useful for monitoring using `services.prometheus.exporters.jitsi.enable`. Learn more about the API: "[The COLIBRI control interface (/colibri/)](https://github.com/jitsi/jitsi-videobridge/blob/v2.3/doc/rest.md)". +- `nixos/lib/make-disk-image.nix` can now mutate EFI variables, run user-provided EFI firmware or variable templates. This is now extensively documented in the NixOS manual. + +- Nixpkgs now uses [IEEE-standard floating point arithmetic](https://github.com/NixOS/nixpkgs/pull/170215) on `powerpc64le-linux`. + +- Deprecated `xlibsWrapper` transitional package has been removed in favour of direct use of its constituents: `xorg.libX11`, `freetype` and others. ## Detailed migration information {#sec-release-23.05-migration}