Skip to content

Build Instructions

Joe Bauer edited this page Jul 1, 2020 · 2 revisions
Clone this wiki locally

A comprehensive build guide video is available, here.

  1. Place the diodes (be sure to match the polarity with what is on the PCB silk screen)
  2. Place the resistors (no polarity)
  3. Solder the diodes and resistors and trim the excess leads
  4. Place all the Thonkiconn jacks
  5. Place the switch (no polarity)
  6. Put the faceplate on and hand screw the nuts on (be sure not to pull any of the jacks out)
  7. Solder the jacks and switch
  8. Done!