Commit
This commit does not belong to any branch on this repository, and may belong to a fork outside of the repository.
displays sources and exports
- Loading branch information
Showing
47 changed files
with
52,935 additions
and
0 deletions.
There are no files selected for viewing
Binary file not shown.
Binary file added
BIN
+101 KB
HARDWARE/LCDs/LCD-OLinuXino-10TS/Hardware revision A/LCD-OLINUXINO-10''TS_Rev_A.brd
Binary file not shown.
Binary file added
BIN
+41.2 KB
HARDWARE/LCDs/LCD-OLinuXino-10TS/Hardware revision A/LCD-OLINUXINO-10''TS_Rev_A.pdf
Binary file not shown.
Binary file added
BIN
+402 KB
HARDWARE/LCDs/LCD-OLinuXino-10TS/Hardware revision A/LCD-OLINUXINO-10''TS_Rev_A.sch
Binary file not shown.
44 changes: 44 additions & 0 deletions
44
HARDWARE/LCDs/LCD-OLinuXino-10TS/Hardware revision C1/LCD-OLINUXINO-10''TS_Rev_C.bom
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Original file line number | Diff line number | Diff line change |
---|---|---|
@@ -0,0 +1,44 @@ | ||
Partlist exported from J:/SVN/OLIMEX_OTHER/LCD-OLINUXINO-10''TS/Hardware/tags/LCD-OLINUXINO-10''TS_Rev_C1/BRD/LCD-OLINUXINO-10''TS_Rev_C.sch at 19/06/2017 15:25:27 | ||
|
||
Qty Value Device Parts | ||
1 1.1R R-EU_R0603_5MIL_DWS R12 | ||
5 1.05k/1% R-EU_R0603_5MIL_DWS R10, R11, R22, R26, R32 | ||
2 1N5819/SS14 SCHOTKKY7.62SS2 D2, D5 | ||
2 1uF/25V C-EUC0805_5MIL_DWS C4, C5 | ||
1 2.2k R-EU_R0603_5MIL_DWS R8 | ||
2 4.7k R-EU_R0603_5MIL_DWS R13, R14 | ||
2 4.7uH/1.15A/DCR<0.1R/CD43 L-CD42(43) L1, L2 | ||
1 5V:Close/3.3V:Open SJ2W6 3.3V/5V | ||
5 10k R-EU_R0603_5MIL_DWS R7, R19, R23, R25, R30 | ||
2 10uF/16V C-EUC0805_5MIL_DWS C6, C15 | ||
4 20k/1% R-EU_R0603_5MIL_DWS R1, R2, R9, R21 | ||
6 22uF/6.3V C-EUC0603_DWS C1, C7, C8, C17, C18, C21 | ||
4 47k R-EU_R0603_5MIL_DWS R33, R36, R37, R39 | ||
3 56.2k/1% R-EU_R0603_5MIL_DWS R16, R17, R18 | ||
12 100nF C-EUC0603_DWS C2, C3, C9, C10, C11, C12, C13, C14, C16, C19, C20, C22 | ||
1 220R R-EU_R0603_5MIL_DWS R15 | ||
1 562R/1% R-EU_R0603_5MIL_DWS R29 | ||
2 AP3031KTR-G1 AP3031KTR-G1 U1, U2 | ||
1 BAT54C DIODE_AC-CA_ D1 | ||
2 BAT54S DIODE_AC-AC_ D3, D4 | ||
1 BZV55C5V1 ZDIOD-SMD Z1 | ||
1 BZV55C20 ZDIOD-SMD Z2 | ||
1 CTRL:Close/EN:Open SJ2W5 CTRL/EN | ||
1 DCJ-W54R-20-LF PWR-JAKDCJ-W PWR_JACK | ||
1 DTC114YKA DIGITAL_TRANSISTORS-NPNDTC114YKA T1 | ||
1 F101T50+(FPV-WZA21-50-LF)+(FPA-WZB25-04-LF) LCD10"_TOUCH-F101T50 LCD | ||
3 FIDUCIAL FIDUCIAL U$1, U$2, U$3 | ||
1 FPV-WZA21-40LF ML40-FPV-WZA21-40-LF LCD_A64-OLINUXINO | ||
1 GPH127SMT-02x20 ML40-GPH127SMT-02X20(PA-V16X-2X20-LF) LCD_LIME2 | ||
1 GPH127SMT-02x20 ML40YA-V36P-2X20-LF LCD_LIME | ||
1 H-WX-1x3 JP2EHN1X3-SMD 5V_JACK/5V_LCD_CON | ||
2 IRLML6402 P-MOS+DIODIRLML6402 FET1, FET2 | ||
1 ML40-GBH-254-SMT-40 ML40-GBH-254-SMT-40 LCD_CON | ||
13 NA R-EU_R0603_5MIL_DWS R3, R4, R5, R6, R20, R24, R27, R28, R31, R34, R35, R38, R40 | ||
2 NA SJ VLED+_E, VLED-_E | ||
2 NA(100uF/16V) CPOL-EUC-SMD5X11-M C23, C24 | ||
1 NA(BZV55C3V0) ZDIOD-SMD Z3 | ||
1 NA(BZV55C3V9) ZDIOD-SMD Z4 | ||
1 NA(HN1X8) CON8HN1X8 PWR | ||
2 Open SJ L/R, U/D | ||
2 TESTPAD120X40 TESTPAD120X40 VLED+, VLED- |
Binary file added
BIN
+122 KB
HARDWARE/LCDs/LCD-OLinuXino-10TS/Hardware revision C1/LCD-OLINUXINO-10''TS_Rev_C.brd
Binary file not shown.
Binary file added
BIN
+43.6 KB
HARDWARE/LCDs/LCD-OLinuXino-10TS/Hardware revision C1/LCD-OLINUXINO-10''TS_Rev_C.pdf
Binary file not shown.
Binary file added
BIN
+421 KB
HARDWARE/LCDs/LCD-OLinuXino-10TS/Hardware revision C1/LCD-OLINUXINO-10''TS_Rev_C.sch
Binary file not shown.
29 changes: 29 additions & 0 deletions
29
HARDWARE/LCDs/LCD-OLinuXino-10TS/LCD-OLINUXINO-10''TS_revision_log.txt
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Original file line number | Diff line number | Diff line change |
---|---|---|
@@ -0,0 +1,29 @@ | ||
LCD-OLINUXINO-10 and LCD-OLINUXINO-10TS use the same design files (schematic, board files) | ||
|
||
Hardware revision A | ||
======== | ||
Initial release | ||
|
||
Hardware revision B | ||
======== | ||
1. Added connector for A64-OLinuXino. | ||
2. R1 and R2 changed to 20k/1%. | ||
3. Changed the PWR_JACK connector. | ||
|
||
Hardware revision C | ||
======== | ||
1. Added 8 resistor positions (pull-up/down) that can be used for binary display identification. Of these 8 positions, 4 resistors have to be populated with 51k/1% and 4 should be left unpopulated. The 10 inch LCD's ID number was set to 0x04. The list of the rest of the display IDs is: | ||
|
||
0x01 -> 4.3" LCD | ||
0x02 -> 5.0" LCD | ||
0x03 -> 7.0" LCD | ||
0x04 -> 10.0" LCD | ||
0x05 -> 15.4" LCD | ||
|
||
2. Fixed wrong label about the modes in the schematic. In MODE=0, SYNK Mode - DE must be grounded. In MODE=1, DE Mode - DE must be VS and HS must be pulled high. | ||
|
||
Hardware revision C1 | ||
========= | ||
1. Certain displays required Z1 change from BZV55C8V2 to BZV55C5V1. | ||
|
||
|
Binary file not shown.
Binary file added
BIN
+84.4 KB
HARDWARE/LCDs/LCD-OLinuXino-15.6/Hardware revision D/LCD-OLinuXino-15_6_revision_D.brd
Binary file not shown.
Binary file added
BIN
+29.5 KB
HARDWARE/LCDs/LCD-OLinuXino-15.6/Hardware revision D/LCD-OLinuXino-15_6_revision_D.pdf
Binary file not shown.
Binary file added
BIN
+241 KB
HARDWARE/LCDs/LCD-OLinuXino-15.6/Hardware revision D/LCD-OLinuXino-15_6_revision_D.sch
Binary file not shown.
12 changes: 12 additions & 0 deletions
12
HARDWARE/LCDs/LCD-OLinuXino-15.6/LCD-Olinuxino-15.6''_revision_log.txt
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Original file line number | Diff line number | Diff line change |
---|---|---|
@@ -0,0 +1,12 @@ | ||
LCD-OLINUXINO-15.6 and LCD-OLINUXINO-15.6FHD started as separate designs but starting hardware revision E, both board use the design files (the design of LCD-OLINUXINO-15.6FHD). | ||
|
||
Hardware revision D | ||
======== | ||
Initial release | ||
|
||
Hardware revision D1 | ||
========== | ||
1. Changed R12 from 1.1k/1% to 240R | ||
2. Changed C3 from 10uF/16V/0805 to 22uF/6.3V/0805 | ||
|
||
After revision D1 both LCD-OLinuXino-15.6 and LCD-OLinuXino-15.6FHD use the PCB and design files of LCD-OLinuXino-15.6FHD (first common revision is hardware revision E of the LCD-OLinuXino-15.6FHD board). Refer to the design files for LCD-OLinuXino-15.6FHD if your display has white print of LCD-OLinuXino-15.6FHD. |
Binary file added
BIN
+36 KB
HARDWARE/LCDs/LCD-OLinuXino-15.6FHD/Hardware revision E/CCASA_LICENSE.pdf
Binary file not shown.
30 changes: 30 additions & 0 deletions
30
HARDWARE/LCDs/LCD-OLinuXino-15.6FHD/Hardware revision E/LCD-OLinuXino-15.6FHD_Rev_E.bom
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Original file line number | Diff line number | Diff line change |
---|---|---|
@@ -0,0 +1,30 @@ | ||
Partlist exported from J:/SVN/OLIMEX_OTHER/LCD-Olinuxino-15.6''_FHD/Hardware/trunk/BRD/LCD-OLinuXino-15.6FHD_Rev_E.sch at 20/11/2014 15:17:05 | ||
|
||
Qty Value Device Parts | ||
1 0R(board_munted) R_0R0R(NA) R6 | ||
3 1.1k/1% R-EU_R0603_5MIL_DWS R5, R11, R14 | ||
1 1N5822/SS34/SMA D-MLL-41 D2 | ||
1 2.2uH/3A/YS75/7x8 LLQH88PN100M38 L1 | ||
1 3.3V:Open/5.0V:Close SJ2W5 3.3V/5.0V | ||
4 10k R-EU_R0603_5MIL_DWS R1, R2, R4, R13 | ||
2 10uF/16V C-EUC0805_5MIL_DWS C5, C6 | ||
2 18.2k/1% R-EU_R0603_5MIL_DWS R3, R10 | ||
5 22uF/6.3V C-EUC0603_DWS C1, C2, C3, C7, C8 | ||
2 560R R-EU_R0603_5MIL_DWS R8, R12 | ||
1 BAT54C DIODE_AC-CA_ D1 | ||
1 BSS138 N-MOS+DIODBSS138(SOT23-3) FET3 | ||
1 DCJ-W54R-20-LF PWR-JAKDCJ-W PWR_JACK | ||
1 DTC114YKA DIGITAL_TRANSISTORS-NPNDTC114YKA T1 | ||
1 EN:Open/CTRL:Close SJ2W5 EN/CTRL | ||
3 FIDUCIAL FIDUCIAL U$1, U$2, U$3 | ||
1 H-WX-1x3 JP2EHN1X3-SMD PWR_JACK/5V_LCD_CON | ||
3 IRLML6402 P-MOS+DIODIRLML6402 FET1, FET2, FET4 | ||
1 LCD15.6''(B156XW04_V5)FPV-WZA21-40-LF LCD15.6''(B156XW04_V5)FPV-WZA21-40-LF LCD | ||
1 ML40-GBH-254-SMT-40 ML40-GBH-254-SMT-40 LCD_CON | ||
1 ML40-GPH127SMT-02X20 ML40-GPH127SMT-02X20(PA-V16X-2X20-LF) LCD_LIME2 | ||
1 ML40-GPH127SMT-02X20 ML40YA-V36P-2X20-LF LCD_LIME | ||
1 NA C-EUC0603_DWS C4 | ||
2 NA(4.7k) R-EU_R0603_5MIL_DWS R7, R9 | ||
1 PWR_JACK:Open/10V_DCDC:Close SJ2W3 JACK/10V_DC | ||
1 SY7208(SOT23-6) SY7208 U1 | ||
2 open SJSJ_1_THE_SMALLEST BKL_E, LED_E |
Oops, something went wrong.