Skip to content

uc firmware update

Kosta Xynos edited this page Nov 19, 2017 · 3 revisions


If an update of the Hardsploit micro controler is available:

Bootloader mode for Hardsploit

First if Hardsploit is plugged, unplug it.

Find the two "USB BOOTLOADER" pins (top left part of the Hardsploit board) and connect them together with a jumper.

Connect Hardsploit to your computer and start it.


In order to upload the new firmware, you need to install the dfu-util package on your distribution with the command:

  apt-get install dfu-util


Once it's done you can use the "Option" menu in the Hardsploit GUI and launch the "Firmware update" option


The update proceed in the background. When it's done, unplug Hardsploit, remove the bootloader jumper and reconnect it.

You can’t perform that action at this time.