Fetching contributors…
Cannot retrieve contributors at this time
466 lines (385 sloc) 17.2 KB
setup_toolchain() {
if [ "$1" = target ]; then
export DESTIMAGE="target"
unset CPP
export CC=$TARGET_CC
export CXX=$TARGET_CXX
export LD=$TARGET_LD
export AS=$TARGET_AS
export AR=$TARGET_AR
export NM=$TARGET_NM
export RANLIB=$TARGET_RANLIB
export OBJCOPY=$TARGET_OBJCOPY
export OBJDUMP=$TARGET_OBJDUMP
export STRIP=$TARGET_STRIP
export CPPFLAGS="$TARGET_CPPFLAGS"
export CFLAGS="$TARGET_CFLAGS"
export CXXFLAGS="$TARGET_CXXFLAGS"
export LDFLAGS="$TARGET_LDFLAGS"
export PKG_CONFIG_PATH="$TARGET_PKG_CONFIG_PATH"
export PKG_CONFIG_LIBDIR="$TARGET_PKG_CONFIG_LIBDIR"
export PKG_CONFIG_SYSROOT_DIR="$TARGET_PKG_CONFIG_SYSROOT_DIR"
# set python defaults
export _python_sysroot="$SYSROOT_PREFIX"
export _python_prefix=/usr
export _python_exec_prefix=/usr
# set CMAKE configfile for target
export CMAKE_CONF=$ROOT/$TOOLCHAIN/etc/cmake-$TARGET_NAME.conf
elif [ "$1" = host ]; then
export DESTIMAGE="host"
unset CPP
export AWK=$HOST_AWK
export CC=$HOST_CC
export CXX=$HOST_CXX
export LD=$HOST_LD
export AS=$HOST_AS
export AR=$HOST_AR
export NM=$HOST_NM
export RANLIB=$HOST_RANLIB
export OBJCOPY=$HOST_OBJCOPY
export STRIP=$HOST_STRIP
export CPPFLAGS="$HOST_CPPFLAGS"
export CFLAGS="$HOST_CFLAGS"
export CXXFLAGS="$HOST_CXXFLAGS"
export LDFLAGS="$HOST_LDFLAGS"
export PKG_CONFIG_PATH="$HOST_PKG_CONFIG_PATH"
export PKG_CONFIG_LIBDIR="$HOST_PKG_CONFIG_LIBDIR"
export PKG_CONFIG_SYSROOT_DIR="$HOST_PKG_CONFIG_SYSROOT_DIR"
# set CMAKE configfile for host
export CMAKE_CONF=$ROOT/$TOOLCHAIN/etc/cmake-$HOST_NAME.conf
fi
}
kernel_path() {
if [ -e $HOME/.openelec/projects/$PROJECT/packages/linux/package.mk ]; then
. $HOME/.openelec/projects/$PROJECT/packages/linux/package.mk
elif [ -e $HOME/.openelec/packages/linux/package.mk ]; then
. $HOME/.openelec/packages/linux/package.mk
elif [ -e $ROOT/projects/$PROJECT/packages/linux/package.mk ]; then
. $ROOT/projects/$PROJECT/packages/linux/package.mk
else
. $ROOT/packages/linux/package.mk
fi
echo $ROOT/$BUILD/${PKG_NAME}-${PKG_VERSION}
}
kernel_version() {
if [ -e $HOME/.openelec/projects/$PROJECT/packages/linux/package.mk ]; then
. $HOME/.openelec/projects/$PROJECT/packages/linux/package.mk
elif [ -e $HOME/.openelec/packages/linux/package.mk ]; then
. $HOME/.openelec/packages/linux/package.mk
elif [ -e $ROOT/projects/$PROJECT/packages/linux/package.mk ]; then
. $ROOT/projects/$PROJECT/packages/linux/package.mk
else
. $ROOT/packages/linux/package.mk
fi
echo ${PKG_VERSION}
}
# get kernel module dir
get_module_dir() {
basename $(ls -d $(get_build_dir linux)/.install_pkg/lib/modules/*)
}
# get package's build dir
get_build_dir() {
if [ ! -z $1 ] ; then
local _PKG_DIR=$(find $HOME/.openelec/projects/$PROJECT/packages -name $1 2>/dev/null)
if [ -d "$_PKG_DIR" -a -f $_PKG_DIR/package.mk ] ; then
. $_PKG_DIR/package.mk
else
local _PKG_DIR=$(find $HOME/.openelec/packages -name $1 2>/dev/null)
if [ -d "$_PKG_DIR" -a -f $_PKG_DIR/package.mk ] ; then
. $_PKG_DIR/package.mk
else
local _PKG_DIR=$(find $ROOT/projects/$PROJECT/packages -name $1 2>/dev/null)
if [ -d "$_PKG_DIR" -a -f $_PKG_DIR/package.mk ] ; then
. $_PKG_DIR/package.mk
else
local _PKG_DIR=$(find $ROOT/packages -name $1 2>/dev/null)
if [ -d "$_PKG_DIR" -a -f $_PKG_DIR/package.mk ] ; then
. $_PKG_DIR/package.mk
fi
fi
fi
fi
echo $ROOT/$BUILD/${PKG_NAME}-${PKG_VERSION}
fi
}
tolower(){
echo "$@" | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz
}
require_eglibc() {
if [ "$TARGET_LIBC" != eglibc ]; then
echo "$1 requires eglibc, aborting."
exit 1
fi
}
require_cxx() {
if [ "$TOOLCHAIN_CXX" != yes ]; then
echo "$1 requires C++ toolchain support, aborting."
exit 1
fi
}
add_user() {
# Usage: add_user "username" "password" "userid" "groupid" "description" "home" "shell"
mkdir -p ${INSTALL}/etc
touch ${INSTALL}/etc/passwd
if [ -z "`grep "$1:" ${INSTALL}/etc/passwd`" ]; then
echo "$1:x:$3:$4:$5:$6:$7" >> ${INSTALL}/etc/passwd
fi
touch ${INSTALL}/etc/shadow
PASSWORD="$2"
if [ "$PASSWORD" = "x" ]; then
PASSWORD="*"
fi
if [ -z "`grep "$1:" ${INSTALL}/etc/shadow`" ]; then
echo "$1:$PASSWORD:::::::" >> ${INSTALL}/etc/shadow
fi
}
add_group() {
# Usage: add_group "groupname" "groupid" ("members")
mkdir -p ${INSTALL}/etc
touch ${INSTALL}/etc/group
if [ -z "`grep "$1:" ${INSTALL}/etc/group`" ]; then
echo "$1:x:$2:$3" >> ${INSTALL}/etc/group
fi
}
do_autoreconf() {
export ACLOCAL_DIR=$SYSROOT_PREFIX/usr/share/aclocal
if [ -e "$ROOT/$TOOLCHAIN/bin/autoconf" ]; then
export AUTOCONF=$ROOT/$TOOLCHAIN/bin/autoconf
fi
if [ -e "$ROOT/$TOOLCHAIN/bin/automake" ]; then
export AUTOMAKE=$ROOT/$TOOLCHAIN/bin/automake
fi
if [ -e "$ROOT/$TOOLCHAIN/bin/autopoint" ]; then
export AUTOPOINT=$ROOT/$TOOLCHAIN/bin/autopoint
fi
if [ -e "$ROOT/$TOOLCHAIN/bin/libtoolize" ]; then
export LIBTOOLIZE=$ROOT/$TOOLCHAIN/bin/libtoolize
fi
if [ -e "$ROOT/$TOOLCHAIN/bin/intltoolize" ]; then
export INTLTOOLIZE=$ROOT/$TOOLCHAIN/bin/intltoolize
fi
if [ -e "$ROOT/$TOOLCHAIN/bin/aclocal" ]; then
export ACLOCAL="$ROOT/$TOOLCHAIN/bin/aclocal -I $ACLOCAL_DIR"
fi
if [ -e "$ROOT/$TOOLCHAIN/bin/autoheader" ]; then
export AUTOHEADER=$ROOT/$TOOLCHAIN/bin/autoheader
fi
if [ -e "$ROOT/$TOOLCHAIN/bin/libtool" ]; then
export LIBTOOL=$ROOT/$TOOLCHAIN/bin/libtool
fi
if [ -e "$ROOT/$TOOLCHAIN/bin/autoreconf" -a -e "$INTLTOOLIZE" ]; then
mkdir -p $ACLOCAL_DIR
export AUTORECONF="$ROOT/$TOOLCHAIN/bin/autoreconf --verbose --force --install -I $ACLOCAL_DIR"
$AUTORECONF $@
fi
}
strip_lto() {
# strip out LTO optimization from *FLAGS
if [ -n "$GCC_OPTIM_LTO" ] ; then
CFLAGS=`echo $CFLAGS | sed -e "s|$GCC_OPTIM_LTO||g"`
CXXFLAGS=`echo $CXXFLAGS | sed -e "s|$GCC_OPTIM_LTO||g"`
fi
if [ -n "$LD_OPTIM_LTO" ] ; then
LDFLAGS=`echo $LDFLAGS | sed -e "s|$LD_OPTIM_LTO||g"`
fi
}
strip_gold() {
# strip out usage from GOLD linker
LDFLAGS=`echo $LDFLAGS | sed -e "s|-fuse-ld=gold||g"`
}
fix_module_depends() {
# modify .modinfo section in kernel module to depends on other required modules
local MODULE="$1"
local DEPENDS="$2"
local OLD_DEPENDS=""
cp ${MODULE} ${MODULE}_orig
$OBJDUMP -s -j .modinfo ${MODULE}_orig | awk 'BEGIN{v=0;} /Contents/ {v=1; next;} {if (v==1) print $0;}' >new.modinfo1
cat new.modinfo1 | cut -c7-41 | awk '{printf($0);}' | sed 's/ //g;s/../\\\x&/g;' >new.modinfo2
/bin/echo -ne `cat new.modinfo2` | tr '\000' '\n' >new.modinfo3
cat new.modinfo3 | awk '/^depends=/ {next;} {print $0;}' | tr '\n' '\000' >new.modinfo
OLD_DEPENDS=$(awk '{FS="="} /depends=/ {print $2}' new.modinfo3)
[ -n "$OLD_DEPENDS" ] && DEPENDS="$OLD_DEPENDS,$DEPENDS"
/bin/echo -ne "depends=$DEPENDS\0" >>new.modinfo
$OBJCOPY --remove-section=.modinfo --add-section=.modinfo=new.modinfo --set-section-flags .modinfo=contents,alloc,load,readonly,data ${MODULE}_orig ${MODULE}
rm new.modinfo*
}
# Usage: enable_service <unit> [target]
enable_service () {
local unit="$1"
local unit_dir="/usr/lib/systemd/system"
local target="$2"
local target_dir=$INSTALL
[ -f "$target_dir/$unit_dir/$unit" ] || exit 1
if [ -z "$target" ] ; then
for target in `grep '^WantedBy' $target_dir/$unit_dir/$unit | cut -f2 -d=` ; do
if [ -n "$target" ]; then
mkdir -p ${target_dir}/$unit_dir/${target}.wants
ln -sf ../${unit} ${target_dir}/$unit_dir/${target}.wants/
fi
done
fi
}
check_path() {
dashes="==========================="
if [ "${PWD##/usr}" != "${PWD}" ]; then
check_pathmessage="$check_pathmessage\n $dashes$dashes$dashes"
check_pathmessage="$check_pathmessage\n ERROR: You try to build inside /usr"
check_pathmessage="$check_pathmessage\n $dashes$dashes$dashes"
check_pathmessage="$check_pathmessage\n This is not supported with our buildsystem."
check_pathmessage="$check_pathmessage\n Please use another dir (for example your \$HOME) to build $DISTRONAME"
echo -e $check_pathmessage
exit 1
fi
}
check_config() {
dashes="==========================="
if [ ! -d $PROJECT_DIR/$PROJECT -a ! -d $HOME/.openelec/projects/$PROJECT ]; then
check_project="$check_project\n $dashes$dashes$dashes"
check_project="$check_project\n ERROR: Project not found, use a valid project or create a new config"
check_project="$check_project\n $dashes$dashes$dashes"
check_project="$check_project\n\n Valid projects:"
for projects in $PROJECT_DIR/* $HOME/.openelec/projects/*; do
check_project="$check_project\n - $(basename $projects)"
done
echo -e $check_project
exit 1
fi
if [ ! -f $PROJECT_DIR/$PROJECT/linux/linux.$TARGET_ARCH.conf -a ! -f $HOME/.openelec/projects/$PROJECT/linux/linux.$TARGET_ARCH.conf ]; then
check_arch="$check_arch\n $dashes$dashes$dashes"
check_arch="$check_arch\n ERROR: Architecture not found, use a valid Architecture"
check_arch="$check_arch\n for your project or create a new config"
check_arch="$check_arch\n $dashes$dashes$dashes"
check_arch="$check_arch\n\n Valid Architectures for your project: $PROJECT"
for arch in $PROJECT_DIR/$PROJECT/linux/*.conf $HOME/.openelec/projects/$PROJECT/linux/*.conf; do
check_arch="$check_arch\n - $(basename $arch | cut -f2 -d".")"
done
echo -e $check_arch
exit 1
fi
}
show_config() {
# load graphic configuration
get_graphicdrivers
dashes="==========================="
config_message="$config_message\n $dashes$dashes$dashes"
config_message="$config_message\n Configuration for $DISTRONAME ($([ "$OFFICIAL" = "yes" ] && echo "official" || echo "community"))"
config_message="$config_message\n $dashes$dashes$dashes"
# Build options
config_message="$config_message\n\n Buildoptions:"
config_message="$config_message\n $dashes$dashes"
config_message="$config_message\n - CPU (ARCH):\t\t\t\t $TARGET_CPU ($TARGET_ARCH)"
config_message="$config_message\n - FLOAT:\t\t\t\t $TARGET_FLOAT"
config_message="$config_message\n - FPU:\t\t\t\t\t $TARGET_FPU"
config_message="$config_message\n - SIMD support:\t\t\t $SIMD_SUPPORT"
config_message="$config_message\n - Optimizations:\t\t\t $OPTIMIZATIONS"
config_message="$config_message\n - LTO (Link Time Optimization) support: $LTO_SUPPORT"
config_message="$config_message\n - GOLD (Google Linker) Support:\t $GOLD_SUPPORT"
config_message="$config_message\n - LLVM support:\t\t\t $LLVM_SUPPORT"
# config_message="$config_message\n - CFLAGS:\t $TARGET_CFLAGS"
# config_message="$config_message\n - LDFLAGS:\t $TARGET_LDFLAGS"
# Graphic configuration
config_message="$config_message\n\n Graphic configuration:"
config_message="$config_message\n $dashes$dashes"
if [ "$DISPLAYSERVER" = "x11" ] ; then
config_message="$config_message\n - Xorg Graphic Drivers:\t\t $GRAPHIC_DRIVERS"
config_message="$config_message\n - XORG Composite support:\t\t $COMPOSITE_SUPPORT"
config_message="$config_message\n - WindowManager:\t\t\t $WINDOWMANAGER"
fi
config_message="$config_message\n - OpenGL (GLX) support (provider):\t $OPENGL_SUPPORT ($OPENGL)"
config_message="$config_message\n - OpenGLES support (provider):\t\t $OPENGLES_SUPPORT ($OPENGLES)"
config_message="$config_message\n - uvesafb support:\t\t\t $UVESAFB_SUPPORT"
# Hardware decoder support
config_message="$config_message\n\n Hardware decoder configuration:"
config_message="$config_message\n $dashes$dashes"
config_message="$config_message\n - Kodi Player driver:\t\t\t $KODIPLAYER_DRIVER"
config_message="$config_message\n - VAAPI Support:\t\t\t $VAAPI_SUPPORT"
config_message="$config_message\n - VDPAU Support:\t\t\t $VDPAU_SUPPORT"
# Input device configuration
config_message="$config_message\n\n Input device configuration:"
config_message="$config_message\n $dashes$dashes"
config_message="$config_message\n - Remote support:\t\t\t $REMOTE_SUPPORT"
config_message="$config_message\n - ATV Remote support:\t\t\t $ATVCLIENT_SUPPORT"
config_message="$config_message\n - CEC Adapter support:\t\t\t $CEC_SUPPORT"
config_message="$config_message\n - IRTrans support:\t\t\t $IRSERVER_SUPPORT"
# Misc. hardware configuration
config_message="$config_message\n\n Misc. hardware configuration:"
config_message="$config_message\n $dashes$dashes"
config_message="$config_message\n - ALSA support:\t\t\t $ALSA_SUPPORT"
config_message="$config_message\n - Pulseaudio support:\t\t\t $PULSEAUDIO_SUPPORT"
config_message="$config_message\n - Bluetooth support:\t\t\t $BLUETOOTH_SUPPORT"
config_message="$config_message\n - LCD drivers:\t\t\t\t $LCD_DRIVER"
for config_driver in $ADDITIONAL_DRIVERS; do
config_message="$config_message\n - Include driver:\t\t\t $config_driver"
done
for config_firmware in $FIRMWARE; do
config_message="$config_message\n - Include firmware:\t\t\t $config_firmware"
done
for config_modules in $INITRAMFS_MODULES; do
config_message="$config_message\n - Initramfs modules:\t\t\t $config_modules"
done
# Network service configuration
config_message="$config_message\n\n Network service configuration:"
config_message="$config_message\n $dashes$dashes"
config_message="$config_message\n - Avahi (Zeroconf) support:\t\t $AVAHI_DAEMON"
config_message="$config_message\n - NFS mounting support:\t\t $NFS_SUPPORT"
config_message="$config_message\n - SAMBA mounting support:\t\t $SAMBA_SUPPORT"
config_message="$config_message\n - SAMBA server support:\t\t $SAMBA_SERVER"
config_message="$config_message\n - SFTP server support:\t\t\t $SFTP_SERVER"
config_message="$config_message\n - PPTP support:\t\t\t $PPTP_SUPPORT"
config_message="$config_message\n - OpenVPN support:\t\t\t $OPENVPN_SUPPORT"
# OS configuration
config_message="$config_message\n\n OS configuration:"
config_message="$config_message\n $dashes$dashes"
config_message="$config_message\n - OEM Support:\t\t\t\t $OEM_SUPPORT"
config_message="$config_message\n - Default ROOT Password:\t\t $ROOT_PASSWORD"
config_message="$config_message\n - Bootloader:\t\t\t\t $BOOTLOADER"
if [ "$BOOTLOADER" = "u-boot" ]; then
config_message="$config_message\n - U-Boot configuration:\t\t $UBOOT_CONFIG"
config_message="$config_message\n - U-Boot config file:\t\t $UBOOT_CONFIGFILE"
fi
config_message="$config_message\n - UDevil support:\t\t\t $UDEVIL"
config_message="$config_message\n - Installer support:\t\t\t $INSTALLER_SUPPORT"
# Misc. Filesystems
config_message="$config_message\n\n Misc. Filesystems:"
config_message="$config_message\n $dashes$dashes"
config_message="$config_message\n - Swap Support:\t\t\t $SWAP_SUPPORT"
if [ "$SWAP_SUPPORT" = "yes" ]; then
config_message="$config_message\n - Swapfile default size:\t\t $SWAPFILESIZE"
fi
config_message="$config_message\n - exFAT Support (via Fuse):\t\t $EXFAT"
config_message="$config_message\n - NTFS Support (via Fuse):\t\t $NTFS3G"
config_message="$config_message\n - Install HFS Tools:\t\t\t $HFSTOOLS"
# Kodi configuration
config_message="$config_message\n\n Kodi configuration:"
config_message="$config_message\n $dashes$dashes"
config_message="$config_message\n - Kodi version:\t\t\t $MEDIACENTER"
config_message="$config_message\n - Kodi include language files:\t\t $KODI_LANGUAGE_ADDONS"
config_message="$config_message\n - Kodi nonfree support:\t\t $KODI_NONFREE_SUPPORT"
config_message="$config_message\n - Kodi Blu-Ray support:\t\t $KODI_BLURAY_SUPPORT"
if [ "$KODI_BLURAY_SUPPORT" = "yes" ] ; then
config_message="$config_message\n - Bluray BD+ support:\t\t $BLURAY_BDPLUS_SUPPORT"
config_message="$config_message\n - Bluray AACS support:\t\t $BLURAY_AACS_SUPPORT"
fi
config_message="$config_message\n - Kodi DVDCSS support:\t\t\t $KODI_DVDCSS_SUPPORT"
config_message="$config_message\n - Kodi Airplay support:\t\t $KODI_AIRPLAY_SUPPORT"
config_message="$config_message\n - Kodi Airtunes support:\t\t $KODI_AIRTUNES_SUPPORT"
config_message="$config_message\n - Kodi NFS support:\t\t\t $KODI_NFS_SUPPORT"
config_message="$config_message\n - Kodi MySQL support:\t\t\t $KODI_MYSQL_SUPPORT"
config_message="$config_message\n - Kodi Optical Drive support:\t\t $KODI_OPTICAL_SUPPORT"
config_message="$config_message\n - Kodi SAMBA client support:\t\t $KODI_SAMBA_SUPPORT"
config_message="$config_message\n - Kodi SSH client support:\t\t $KODI_SSHLIB_SUPPORT"
config_message="$config_message\n - Kodi UPNP support:\t\t\t $KODI_UPNP_SUPPORT"
config_message="$config_message\n - Kodi Webserver support:\t\t $KODI_WEBSERVER_SUPPORT"
for config_skin in $SKINS; do
config_message="$config_message\n - Include Skin:\t\t\t $config_skin"
done
config_message="$config_message\n - Default Skin:\t\t\t $SKIN_DEFAULT"
config_message="$config_message\n - Remove shipped skins:\t\t $SKIN_REMOVE_SHIPPED"
config_message="$config_message\n - Include extra fonts:\t\t\t $KODI_EXTRA_FONTS"
config_message="$config_message\n"
config_message="$config_message\n $dashes$dashes$dashes"
config_message="$config_message\n End Configuration for $DISTRONAME"
config_message="$config_message\n $dashes$dashes$dashes"
config_message="$config_message\n\n\n"
echo -e "$config_message"
}