From 26130dc4d6771406cec81848c3470c6346968e19 Mon Sep 17 00:00:00 2001 From: mattrowe-opennebula Date: Thu, 21 May 2026 13:31:41 +0200 Subject: [PATCH] M #~: Known issues tidying 7.2.1 --- .../release_notes/known_issues.md | 60 +++++++++---------- 1 file changed, 30 insertions(+), 30 deletions(-) diff --git a/content/software/release_information/release_notes/known_issues.md b/content/software/release_information/release_notes/known_issues.md index ed2e1a25..bd57e695 100644 --- a/content/software/release_information/release_notes/known_issues.md +++ b/content/software/release_information/release_notes/known_issues.md @@ -12,45 +12,45 @@ weight: "6" -A complete list of [known issues for OpenNebula is maintained here](https://github.com/OpenNebula/one/issues?q=is%3Aopen%20is%3Aissue%20type%3ABug%20label%3A%22Status%3A%20Accepted%22). +A complete list of [known issues for OpenNebula is maintained on GitHub](https://github.com/OpenNebula/one/issues?q=is%3Aopen%20is%3Aissue%20type%3ABug%20label%3A%22Status%3A%20Accepted%22). -This page will be updated with relevant information about bugs affecting OpenNebula, as well as possible workarounds until a patch is officially published. +This page will be updated with relevant information about known bugs affecting OpenNebula, as well as possible workarounds until a patch is officially published. ## Core -- OneForm is not properly restarted in a [HA setup when the leader changes.](https://github.com/OpenNebula/one/issues/7562) +OneForm is not properly restarted in a [HA setup when the leader changes](https://github.com/OpenNebula/one/issues/7562). ## Drivers - Virtualization -- [libvirtd restarts in cycles each 10 minutes with error message in system logs](https://github.com/OpenNebula/one/issues/6463), due to the way libvirtd gets activated per interaction by systemd in 120-second slices. As the default interval for the OpenNebula monitor probe is 600 seconds (10 minutes), each time a probe reactivates libvirtd, it sends those messages to syslog. +[libvirtd restarts in cycles each 10 minutes with an error message in system logs](https://github.com/OpenNebula/one/issues/6463), due to the way libvirtd gets activated per interaction by systemd in 120-second slices. As the default interval for the OpenNebula monitor probe is 600 seconds (10 minutes), each time a probe reactivates libvirtd, it sends those messages to syslog. ## Sunstone -- Guacamole RDP as is currently shipped in OpenNebula does not support NLA authentication. You can follow [these instructions](https://www.parallels.com/blogs/ras/disabling-network-level-authentication/) in order to disable NLA in the Windows box to use Guacamole RDP within Sunstone. - -- The following new features have not been integrated into Sunstone yet, but are planned for a future release: - - New [monitor message `EXEC_VM`](../../../product/cloud_system_administration/resource_monitoring/monitoring_system.md) to retrieve the result of commands executed inside a Virtual Machine. - - [VirtioFS](../../../product/cluster_configuration/storage_system/virtiofs_ds.md) datastores enable Virtual Machines to directly access host filesystems, providing fast, low-latency shared file access. This simplifies data sharing across VMs while improving performance for data-intensive workloads. +* Guacamole RDP as it is currently shipped in OpenNebula does not support NLA authentication. You can follow [these instructions](https://www.parallels.com/blogs/ras/disabling-network-level-authentication/) in order to disable NLA in the Windows box to use Guacamole RDP within Sunstone. +
+
+* The following new features have not been integrated into Sunstone yet, but are planned for a future release: + * New [monitor message `EXEC_VM`]({{% relref "product/cloud_system_administration/resource_monitoring/monitoring_system.md" %}}) to retrieve the result of commands executed inside a Virtual Machine. + * [VirtioFS]({{% relref "product/cluster_configuration/storage_system/virtiofs_ds.md" %}}) datastores enable Virtual Machines to directly access Host filesystems, providing fast, low-latency shared file access. This simplifies data sharing across VMs while improving performance for data-intensive workloads. ## Migration -- When upgrading to 7.2 the `onedb` migration might fail if the `/etc/one/sunstone-views.yaml` file contains a single, unclosed value under the **labels_groups** key, example: - - ```yaml - labels_groups: - default: - ``` +When upgrading to 7.2 the `onedb` migration might fail if the `/etc/one/sunstone-views.yaml` file contains a single, unclosed value under the **labels_groups** key, example: - This can be mitigated by declaring an empty array as the value instead, example: +```yaml +labels_groups: + default: +``` +This can be mitigated by declaring an empty array as the value instead, for example: - ```yaml - labels_groups: - default: [] - ``` +```yaml +labels_groups: + default: [] +``` ## Upgrade -- On RHEL/AlmaLinux 9, upgrading from OpenNebula 7.0 to 7.2 may fail due to conflicts between the distro nodejs 16 packages and the nodesource nodejs 20 required by `opennebula-fireedge`. The workaround is to remove the distro nodejs packages before upgrading: +On RHEL/AlmaLinux 9, upgrading from OpenNebula 7.0 to 7.2 may fail due to conflicts between the distro nodejs 16 packages and the nodesource nodejs 20 package required by `opennebula-fireedge`. The workaround is to remove the distro nodejs packages before upgrading: ```default rpm -e --nodeps nodejs nodejs-docs nodejs-full-i18n nodejs-libs npm @@ -61,9 +61,9 @@ This page will be updated with relevant information about bugs affecting OpenNeb OpenNebula uses the `cirrus` graphical adapter for KVM Virtual Machines by default. It could happen that after installing a graphical desktop on a Linux VM, the Xorg window system does not load the appropriate video driver. You can force a VESA mode by configuring the kernel parameter `vga=VESA_MODE` in the GNU GRUB configuration file. [Here](https://en.wikipedia.org/wiki/VESA_BIOS_Extensions#Linux_video_mode_numbers/) you can find the VESA mode numbers. For example, adding `vga=791` as kernel parameter will select the 16-bit 1024×768 resolution mode. -## Market proxy settings +## Market Proxy Settings -- The option `--proxy` in the `MARKET_MAD` may not be working correctly. To solve it, execute `systemctl edit opennebula` and add the following entries: +The option `--proxy` in the `MARKET_MAD` may not be working correctly. To solve it, execute `systemctl edit opennebula` and add the following entries: ```default [Service] @@ -72,7 +72,7 @@ Environment="https_proxy=http://proxy_server" Environment="no_proxy=domain1,domain2" ``` -Where `proxy_server` is the proxy server to be used and `no_proxy` is a list of the domains or IP ranges that must not be accessed via proxy by opennebula. After that, reload systemd service configuration with `systemctl daemon-reload` and restart opennebula with a `systemctl restart opennebula` +Where `proxy_server` is the proxy server to be used and `no_proxy` is a list of the domains or IP ranges that must not be accessed via proxy by OpenNebula. After that, reload the systemd service configuration with `systemctl daemon-reload` and restart OpenNebula with a `systemctl restart opennebula`. ## Monitoring @@ -102,10 +102,10 @@ host: ## SUSE -- The following components are not available for SUSE in 7.2: - - opennebula-form - - opennebula-ovirt - - opennebula-lxc +* The following components are not available for SUSE in 7.2: + * opennebula-form + * opennebula-ovirt + * opennebula-lxc - PyONE gRPC is not working on openSUSE 16 due to a [protobuf packaging bug](https://bugzilla.opensuse.org/show_bug.cgi?id=1260084). The workaround is to force-install a compatible version: @@ -113,9 +113,9 @@ host: pip3.13 install protobuf==5.28.3 --force ``` -## LinuxContainers marketplace +## Linux Containers marketplace -The appliances on this marketplace will fail [to boot](https://github.com/OpenNebula/one/issues/7391) when deployed on rhel10 like hosts. The parameter `lxc.apparmor.profile=unconfined` is what causes the issue and needs to be removed after the appliance is imported. +The appliances on this marketplace will fail [to boot](https://github.com/OpenNebula/one/issues/7391) when deployed on REHL10-like Hosts. The parameter `lxc.apparmor.profile=unconfined` is what causes the issue and needs to be removed after the appliance is imported. ``` RAW=[