Skip to content
Permalink
Branch: master
Find file Copy path
Find file Copy path
Fetching contributors…
Cannot retrieve contributors at this time
163 lines (159 sloc) 11.1 KB
<Product Revision="2" xmlns="https://github.com/OpenZWave/open-zwave">
<MetaData>
<MetaDataItem name="OzwInfoPage">http://www.openzwave.com/device-database/027A:A004:A000</MetaDataItem>
<MetaDataItem name="ProductPic">images/zooz/zen20v2.png</MetaDataItem>
<MetaDataItem id="A004" name="ZWProductPage" type="A000">https://products.z-wavealliance.org/products/3158/</MetaDataItem>
<MetaDataItem name="Description">FEATURES:
- Z-Wave on/off control of up to 5 electrical devices
- On/off (charging/charged) reports from USB ports to the hub (no Z-Wave control) - turn off the charging device for best results
- Energy monitoring for each of the 5 outlets
- Built-in overload protection and ETL certification
- Z-Wave Plus signal repeater to extend network range
- S2 security protocol and the latest 500 Z-Wave chip for faster and safer wireless communication
SPECS:
- Model Number: ZEN20 VER. 2.0
- Z-Wave Signal Frequency: 908.42 MHz
- Power: 120 VAC
- Maximum Load: 15 A total (between 5 outlets)
- Maximum Load for USB ports: 2.1 A total (between 2 ports)
- Cord Length: 2 feet
- Range: Up to 100 feet line of sight
- Installation and Use: Indoor only</MetaDataItem>
<MetaDataItem name="Name">5-Outlet Power Strip</MetaDataItem>
<MetaDataItem id="A004" name="Identifier" type="A000">ZEN20 VER. 2.0</MetaDataItem>
<MetaDataItem name="ExclusionDescription">1. Bring the strip within direct range of your Z-Wave gateway (hub).
2. Put the Z-Wave hub into exclusion mode.
3. Press and release the CH1 button 3 times quickly.
4. Your hub will confirm exclusion and all of the channels (child outlets) and the main device will disappear from your controller's device list.</MetaDataItem>
<MetaDataItem name="ProductManual">https://Products.Z-WaveAlliance.org/ProductManual/File?folder=&amp;filename=Manuals/3158/zooz-s2-z-wave-plus-power-strip-zen20-ver2-online-manual.pdf</MetaDataItem>
<MetaDataItem name="ResetDescription">If your primary controller is missing or inoperable, you may need to reset the device to factory settings. To complete the reset process manually, click-click-click’n’hold CH1 button for at least 10 seconds. All LED indicators will flash to confirm successful reset.
NOTE: All previously recorded activity and custom settings EXCEPT for the kWh record will be erased from the device’s memory.</MetaDataItem>
<MetaDataItem id="A004" name="FrequencyName" type="A000">U.S. / Canada / Mexico</MetaDataItem>
<MetaDataItem name="InclusionDescription">1. Plug the Power Strip into a grounded receptacle you’re planning to use it at (it doesn’t need to be close to the hub)
2. Initiate inclusion (pairing) in the app (or web interface).
3. CLICK CH1 BUTTON 3 TIMES QUICKLY. All LED indicators will start flashing
4. You will see 7 or 8 new on/off devices in your app: 5 channels or on/off control, 2 channels for on/off monitoring (USB ports reporting charging/ charged status, no control), and possibly one master node to access and adjust advanced settings in.</MetaDataItem>
<ChangeLog>
<Entry author="Justin Hammond - Justin@dynam.ac" date="03 Jun 2019" revision="2">Initial Metadata Import from Z-Wave Alliance Database - https://products.z-wavealliance.org/products/3158/xml</Entry>
</ChangeLog>
</MetaData>
<!-- https://products.z-wavealliance.org/products/3158 -->
<!-- Configuration Parameters -->
<CommandClass id="112">
<Value genre="config" index="1" label="On/Off Status Recovery After Power Failure" max="2" min="0" size="1" type="list" units="" value="0">
<Help>Status after Power Failure</Help>
<Item label="State before power outage" value="0"/>
<Item label="ON after power restored" value="1"/>
<Item label="OFF after power restored" value="2"/>
</Value>
<Value genre="config" index="2" label="Power Wattage Report Value Threshold" max="65535" min="0" size="4" type="int" units="watts" value="65535">
<Help>0 = power meter disabled; 1-65535 = value in watts for report threshold</Help>
</Value>
<Value genre="config" index="3" label="Power Wattage Report Frequency" max="2678400" min="0" size="4" type="int" units="seconds" value="2678400">
<Help>0 = disabled; 30-2678400 = time in seconds to send power wattage report</Help>
</Value>
<Value genre="config" index="4" label="Energy (kWh) Report Frequency" max="2678400" min="0" size="4" type="int" units="seconds" value="2678400">
<Help>0 = disabled; 30-2678400 = time in seconds to send energy report</Help>
</Value>
<Value genre="config" index="5" label="Overload Protection" max="1800" min="0" size="2" type="short" units="watts" value="1800">
<Help>0 = disabled; 1-1800 = value in watts for overload protection</Help>
</Value>
<Value genre="config" index="6" label="Enable/Disable Auto Turn-Off Timer for CH1" max="1" min="0" size="1" type="list" units="" value="0">
<Help>Enable or Disable auto turn-off timer for CH1</Help>
<Item label="Timer Disabled" value="0"/>
<Item label="Timer Enabled" value="1"/>
</Value>
<Value genre="config" index="7" label="Set Auto Turn-Off Timer for CH1" max="65535" min="1" size="4" type="int" units="minutes" value="65535">
<Help>Value in minutes for auto-off timer for CH1, if enabled</Help>
</Value>
<Value genre="config" index="8" label="Enable/Disable Auto Turn-On Timer for CH1" max="1" min="0" size="1" type="list" units="" value="0">
<Help>Enable or Disable auto turn-off timer for CH1</Help>
<Item label="Timer Disabled" value="0"/>
<Item label="Timer Enabled" value="1"/>
</Value>
<Value genre="config" index="9" label="Set Auto Turn-On Timer for CH1" max="65535" min="1" size="4" type="int" units="minutes" value="65535">
<Help>Value in minutes for auto-on timer for CH1, if enabled</Help>
</Value>
<Value genre="config" index="10" label="Enable/Disable Auto Turn-Off Timer for CH2" max="1" min="0" size="1" type="list" units="" value="0">
<Help>Enable or Disable auto turn-off timer for CH2</Help>
<Item label="Timer Disabled" value="0"/>
<Item label="Timer Enabled" value="1"/>
</Value>
<Value genre="config" index="11" label="Set Auto Turn-Off Timer for CH2" max="65535" min="1" size="4" type="int" units="minutes" value="65535">
<Help>Value in minutes for auto-off timer for CH2, if enabled</Help>
</Value>
<Value genre="config" index="12" label="Enable/Disable Auto Turn-On Timer for CH2" max="1" min="0" size="1" type="list" units="" value="0">
<Help>Enable or Disable auto turn-off timer for CH2</Help>
<Item label="Timer Disabled" value="0"/>
<Item label="Timer Enabled" value="1"/>
</Value>
<Value genre="config" index="13" label="Set Auto Turn-On Timer for CH2" max="65535" min="1" size="4" type="int" units="minutes" value="65535">
<Help>Value in minutes for auto-on timer for CH2, if enabled</Help>
</Value>
<Value genre="config" index="14" label="Enable/Disable Auto Turn-Off Timer for CH3" max="1" min="0" size="1" type="list" units="" value="0">
<Help>Enable or Disable auto turn-off timer for CH3</Help>
<Item label="Timer Disabled" value="0"/>
<Item label="Timer Enabled" value="1"/>
</Value>
<Value genre="config" index="15" label="Set Auto Turn-Off Timer for CH3" max="65535" min="1" size="4" type="int" units="minutes" value="65535">
<Help>Value in minutes for auto-off timer for CH3, if enabled</Help>
</Value>
<Value genre="config" index="16" label="Enable/Disable Auto Turn-On Timer for CH3" max="1" min="0" size="1" type="list" units="" value="0">
<Help>Enable or Disable auto turn-off timer for CH3</Help>
<Item label="Timer Disabled" value="0"/>
<Item label="Timer Enabled" value="1"/>
</Value>
<Value genre="config" index="17" label="Set Auto Turn-On Timer for CH3" max="65535" min="1" size="4" type="int" units="minutes" value="65535">
<Help>Value in minutes for auto-on timer for CH3, if enabled</Help>
</Value>
<Value genre="config" index="18" label="Enable/Disable Auto Turn-Off Timer for CH4" max="1" min="0" size="1" type="list" units="" value="0">
<Help>Enable or Disable auto turn-off timer for CH4</Help>
<Item label="Timer Disabled" value="0"/>
<Item label="Timer Enabled" value="1"/>
</Value>
<Value genre="config" index="19" label="Set Auto Turn-Off Timer for CH4" max="65535" min="1" size="4" type="int" units="minutes" value="65535">
<Help>Value in minutes for auto-off timer for CH4, if enabled</Help>
</Value>
<Value genre="config" index="20" label="Enable/Disable Auto Turn-On Timer for CH4" max="1" min="0" size="1" type="list" units="" value="0">
<Help>Enable or Disable auto turn-off timer for CH4</Help>
<Item label="Timer Disabled" value="0"/>
<Item label="Timer Enabled" value="1"/>
</Value>
<Value genre="config" index="21" label="Set Auto Turn-On Timer for CH4" max="65535" min="1" size="4" type="int" units="minutes" value="65535">
<Help>Value in minutes for auto-on timer for CH4, if enabled</Help>
</Value>
<Value genre="config" index="22" label="Enable/Disable Auto Turn-Off Timer for CH5" max="1" min="0" size="1" type="list" units="" value="0">
<Help>Enable or Disable auto turn-off timer for CH5</Help>
<Item label="Timer Disabled" value="0"/>
<Item label="Timer Enabled" value="1"/>
</Value>
<Value genre="config" index="23" label="Set Auto Turn-Off Timer for CH5" max="65535" min="1" size="4" type="int" units="minutes" value="65535">
<Help>Value in minutes for auto-off timer for CH5, if enabled</Help>
</Value>
<Value genre="config" index="24" label="Enable/Disable Auto Turn-On Timer for CH5" max="1" min="0" size="1" type="list" units="" value="0">
<Help>Enable or Disable auto turn-off timer for CH5</Help>
<Item label="Timer Disabled" value="0"/>
<Item label="Timer Enabled" value="1"/>
</Value>
<Value genre="config" index="25" label="Set Auto Turn-On Timer for CH5" max="65535" min="1" size="4" type="int" units="minutes" value="65535">
<Help>Value in minutes for auto-on timer for CH5, if enabled</Help>
</Value>
<Value genre="config" index="26" label="Enable/Disable Manual Control" max="1" min="0" size="1" type="list" units="" value="1">
<Help>Enable or Disable Manual Controll for out Outlets</Help>
<Item label="Manual Control Disabled" value="0"/>
<Item label="Manual Control Enabled" value="1"/>
</Value>
<Value genre="config" index="27" label="LED Indicator Mode" max="2" min="0" size="1" type="list" units="" value="1">
<Help>Normal = LED indicator is on when power is on, off when power is off. Inverse = LED indicator is off when power is on, and on when power is off. Always Off = LED indicator is always off, regardless of power status.</Help>
<Item label="Inverse" value="0"/>
<Item label="Normal" value="1"/>
<Item label="Always Off" value="2"/>
</Value>
</CommandClass>
<!-- Association Groups -->
<CommandClass id="133">
<Associations num_groups="1">
<Group index="1" label="Lifeline" max_associations="5"/>
</Associations>
</CommandClass>
</Product>
You can’t perform that action at this time.