Skip to content

Commit

Permalink
Update Idlock 150 config file for 1.6 firmware (#1917)
Browse files Browse the repository at this point in the history 
* Set idlock product name as specified in wiki/docs

* Use spaces instead of tabs in idlock150.xml

* Update formatting of the idlock150.xml metadata section

* Update idlock config params

* Fix disabled value
  • Loading branch information
@eithe @Fishwaldo
eithe authored and Fishwaldo committed Sep 30, 2019
1 parent 2114a5a commit 4c76375
Show file tree
Hide file tree
Showing 2 changed files with 101 additions and 85 deletions.
184 changes: 100 additions & 84 deletions config/idlock/idlock150.xml
View file
@@ -1,35 +1,35 @@
<Product Revision="2" xmlns="https://github.com/OpenZWave/open-zwave">
<Product Revision="3" xmlns="https://github.com/OpenZWave/open-zwave">
<MetaData>
<MetaDataItem name="OzwInfoPage">http://www.openzwave.com/device-database/0373:0001:0003</MetaDataItem>
<MetaDataItem name="ProductPic">images/idlock/idlock150.png</MetaDataItem>
<MetaDataItem id="0001" name="ZWProductPage" type="0003">https://products.z-wavealliance.org/products/2780/</MetaDataItem>
<MetaDataItem name="ProductManual">https://Products.Z-WaveAlliance.org/ProductManual/File?folder=&amp;filename=Manuals/2780/IDLock150_ZWave_UserManual_v2.1.pdf</MetaDataItem>
<MetaDataItem name="ExclusionDescription">Exclusion – (Puts your device in exclusion mode)
<MetaDataItem name="Name">ID Lock 150 Z-Wave module</MetaDataItem>
<MetaDataItem name="Description">A module enabling your ID Lock digital door lock to a Z-Wave Plus enabled digital door Lock.

• Push and hold key button until all LEDs on touch panel activates (with ID Lock in an unlocked state).
• Release button.
• Enter Master PIN followed by * on touch panel.
• Press digit "2" for settings followed by * on touch panel.
• Press digit “5” on touch panel.
The module is compatible with ID Lock 101 and ID Lock 150.

Exclusion mode starts immediately. LED indicator below logo signals this by flashing blue.</MetaDataItem>
It enables your ID Lock to operate in a Z-Wave network with numerous access control funtions and notifications.</MetaDataItem>
<MetaDataItem name="OzwInfoPage">http://www.openzwave.com/device-database/0373:0001:0003</MetaDataItem>
<MetaDataItem name="ProductPage">https://idlock.no/z-wave/</MetaDataItem>
<MetaDataItem name="ProductSupport">https://idlock.no/kundesenter/</MetaDataItem>
<MetaDataItem name="ProductPic">images/idlock/idlock150.png</MetaDataItem>
<MetaDataItem name="ProductManual">https://idlock.no/wp-content/uploads/2019/08/IDLock150_ZWave_UserManual_v3.02.pdf</MetaDataItem>
<MetaDataItem name="WakeupDescription">Activate by touching the touch panel with finger(s), the palm of the hand on the outside unit or by pushing the key button on the inside unit.</MetaDataItem>
<MetaDataItem name="InclusionDescription">Inclusion – (Puts your device in inclusion mode)

• Push and hold key button until all LEDs on touch panel activates (with ID Lock in an unlocked state).
• Release button.
• Enter Master PIN followed by * on touch panel.
• Press digit "2" for settings followed by * on touch panel.
• Press digit “5” on touch panel.
• Push and hold key button until all LEDs on touch panel activates (with ID Lock in an unlocked state).
• Release button.
• Enter Master PIN followed by * on touch panel.
• Press digit "2" for settings followed by * on touch panel.
• Press digit “5” on touch panel.

Inclusion mode starts immediately. LED indicator below logo signals this by flashing blue.</MetaDataItem>
<MetaDataItem name="Description">A module enabling your ID Lock digital door lock to a Z-Wave Plus enabled digital door Lock.
<MetaDataItem name="ExclusionDescription">Exclusion – (Puts your device in exclusion mode)

The module is compatible with ID Lock 101 and ID Lock 150.
• Push and hold key button until all LEDs on touch panel activates (with ID Lock in an unlocked state).
• Release button.
• Enter Master PIN followed by * on touch panel.
• Press digit "2" for settings followed by * on touch panel.
• Press digit “5” on touch panel.

It enables your ID Lock to operate in a Z-Wave network with numerous access control funtions and notifications.</MetaDataItem>
<MetaDataItem id="0001" name="FrequencyName" type="0003">CEPT (Europe)</MetaDataItem>
<MetaDataItem name="WakeupDescription">Activate by touching the touch panel with finger(s), the palm of the hand on the outside unit or by pushing the key button on the inside unit.</MetaDataItem>
<MetaDataItem id="0001" name="Identifier" type="0003">ID-150</MetaDataItem>
Exclusion mode starts immediately. LED indicator below logo signals this by flashing blue.</MetaDataItem>
<MetaDataItem name="ResetDescription">Device reset – (This will reset RF interface module to factory default settings)
Warning: Please do only proceed with the following reset procedure, if primary network controller is missing or otherwise inoperable.

Expand All @@ -45,62 +45,57 @@ If the Z-wave module is not included in a Z-wave network the door lock will also

FACTORY RESET DOOR LOCK FIRMWARE:

• Push and hold inside lock/unlock button while inserting the fourth battery.
• Receive reset sound.
• Release button.
• Receive confirmation sound.
</MetaDataItem>
<MetaDataItem name="Name">ID Lock 150 Z-Wave module</MetaDataItem>
• Push and hold inside lock/unlock button while inserting the fourth battery.
• Receive reset sound.
• Release button.
• Receive confirmation sound.</MetaDataItem>
<MetaDataItem id="0001" name="ZWProductPage" type="0003">https://products.z-wavealliance.org/products/2780/</MetaDataItem>
<MetaDataItem id="0001" name="FrequencyName" type="0003">CEPT (Europe)</MetaDataItem>
<MetaDataItem id="0001" name="Identifier" type="0003">ID-150</MetaDataItem>
<ChangeLog>
<Entry author="Justin Hammond - Justin@dynam.ac" date="02 Jun 2019" revision="2">Initial Metadata Import from Z-Wave Alliance Database - https://products.z-wavealliance.org/products/2780/xml</Entry>
<Entry author="Eirik Hodne" date="25 Aug 2019" revision="3">Update as per the 1.4.9/1.6 firmware specification</Entry>
</ChangeLog>
</MetaData>
<!-- Configuration Parameters -->

<!--COMMAND_CLASS_CONFIGURATION_V1-->
<!--COMMAND_CLASS_CONFIGURATION_V1-->
<CommandClass id="112">
<Value genre="config" index="1" label="Door Lock Mode" max="3" min="0" size="1" type="list" units="" value="1">
<Help>
Door Lock Mode
Autolock Mode, Manual lock mode, Activate Away Mode, Deactivate Away Mode
Default Value : 1 ( Disable Away / Auto Lock Mode )
</Help>
<Item label="Disable Away, Manual Lock" value="0"/>
<Item label="Disable Away, Auto Lock" value="1"/>
<Item label="Enable Away, Manual Lock" value="2"/>
<Item label="Enable Away, Auto Lock" value="3"/>
Door Lock Mode
Autolock Mode, Manual lock mode, Activate Away Mode, Deactivate Away Mode
Default Value : 1 ( Auto lock, Away off )
</Help>
<Item label="Manual lock, Away off" value="0"/>
<Item label="Auto lock, Away off" value="1"/>
<Item label="Manual lock, Away on" value="2"/>
<Item label="Auto lock, Away on" value="3"/>
</Value>
<Value genre="config" index="2" label="RFID Registration Configuration" max="8" min="1" size="1" type="list" units="" value="5">
<Value genre="config" index="2" label="RFID Mode" max="9" min="5" size="1" type="list" units="" value="5">
<Help>
RFID Registration Configuration
IDLocks can use up to 50 RFID cards. In order to use a RFID, RFID has to be registered by z-wave configuration command class.

RFID Configuration with Z-wave is only valid for ID Lock 101.

Configuration Parameters are as below. Default value is 0x05 (Not in progress).
ID Lock 150 will always report 0x05 as this feature is not supported by this door lock model.

Configuration Set in case of starting to register from gateway
</Help>
<Item label="Begin RFID Registering mode on the door lock" value="1"/>
<Item label="Not in progress" value="5"/>
<Item label="RFID Database clear" value="7"/>
<Item label="RFID Registering mode stop" value="8"/>
RFID Mode
RFID activated
RFID deactivated
Default Value: 5 (RFID activated)
</Help>
<Item label="RFID activated" value="5"/>
<Item label="RFID deactivated" value="9"/>
</Value>
<Value genre="config" index="3" label="Door Hinge Position" max="3" min="0" size="1" type="list" units="" value="0">
<Value genre="config" index="3" label="Door Hinge Direction" max="1" min="0" size="1" type="list" units="" value="0">
<Help>
Door Hinge Position
Default Value : 0 (Right Handle)
</Help>
<Item label="Right Handle" value="0"/>
<Item label="Left Handle" value="1"/>
Door Hinge Position
Default Value : 0 (Right hinged operation)
</Help>
<Item label="Right hinged operation" value="0"/>
<Item label="Left hinged operation" value="1"/>
</Value>
<Value genre="config" index="4" label="Door Audio Volume Level" max="6" min="0" size="1" type="list" units="" value="5" write_only="true">
<Value genre="config" index="4" label="Door Audio Volume" max="6" min="0" size="1" type="list" units="" value="5" write_only="true">
<Help>
Door Audio Volume Level
This parameter is a set only parameter. If the value is changed locally on the door lock, this value will not change.
Default Value : 5
</Help>
Door Audio Volume Level
This parameter is a set only parameter. If the value is changed locally on the door lock, this value will not change.
Default Value : 5
</Help>
<Item label="No Sound" value="0"/>
<Item label="Level 1" value="1"/>
<Item label="Level 2" value="2"/>
Expand All @@ -111,49 +106,70 @@ FACTORY RESET DOOR LOCK FIRMWARE:
</Value>
<Value genre="config" index="5" label="Door ReLock Mode" max="1" min="0" size="1" type="list" units="" value="1">
<Help>
Door ReLock Mode
Default Value: 1 (Enabled)
</Help>
Door ReLock Mode
Default Value: 1 (Enabled)
</Help>
<Item label="Disabled" value="0"/>
<Item label="Enabled" value="1"/>
</Value>
<Value genre="config" index="6" label="Service PIN Mode" max="9" min="0" size="1" type="list" units="" value="0" write_only="true">
<Help>
Service PIN Mode
A configuration get command on this parameter returns the latest set parameter value (set by Z-wave).
This is a set only value, if changed locally on keypad these values are not changed on Z-wave module. Value 5, 6 and 7 are for future use on door lock.
Default Value: 0 (Deactivated)
</Help>
Service PIN Mode
A configuration get command on this parameter returns the latest set parameter value (set by Z-wave).
This is a set only value, if changed locally on keypad these values are not changed on Z-wave module. Value 5 and 6 are for future use on door lock.
Disabled: Disables both PIN and Service PIN menu on door lock

Default Value: 0 (Deactivated)
</Help>
<Item label="Deactivated" value="0"/>
<Item label="1 times used" value="1"/>
<Item label="2 times used" value="2"/>
<Item label="5 times used" value="3"/>
<Item label="10 times used" value="4"/>
<Item label="Not used (for future use)" value="5"/>
<Item label="Not used (for future use)" value="6"/>
<Item label="Not used (for future use)" value="7"/>
<Item label="Always valid" value="7"/>
<Item label="12 Hours used" value="8"/>
<Item label="24 Hours used" value="9"/>
<Item label="Disabled (PIN and Service PIN)" value="254" />
</Value>
<Value genre="config" index="7" label="Door Lock Model Type" max="150" min="101" read_only="true" type="byte" units="" value="150">
<Help>
Door Lock Model Type
This configuration is only accepted by configuration get command
It is a read only parameter. Default value depends on the door lock model type.
</Help>
Door Lock Model Type
This configuration is only accepted by configuration get command
It is a read only parameter. Default value depends on the door lock model type.
</Help>
</Value>
<Value genre="config" index="8" label="Updater Mode" max="3" min="0" type="list" units="" value="0">
<Help>
Updater Mode

Enables use of the Updater app.
Default Value: 0 (Off, no sound)
</Help>
<Item label="Off (no sound)" value="0"/>
<Item label="On (no sound)" value="1"/>
<Item label="Off" value="2"/>
<Item label="On" value="3"/>
</Value>
<Value genre="config" index="9" label="Master PIN Unlock Mode" max="1" min="0" read_only="true" type="list" units="" value="1">
<Help>
Master PIN Unlock Mode
</Help>
<Item label="Disabled" value="0"/>
<Item label="Enabled" value="1"/>
</Value>
<Value genre="config" index="10" label="Retrieve RFID Information" type="int" units="">
<Help>
Configuration Report for retriving the RFID information
Byte 1: Para1 (msb)
Byte 2: Para2
Byte 3: Para3
Byte 4: Para4 (lsb)
</Help>
Configuration Report for retriving the RFID information
Byte 1: Para1 (msb)
Byte 2: Para2
Byte 3: Para3
Byte 4: Para4 (lsb)
</Help>
</Value>
</CommandClass>
<!-- Association Groups -->
<!--COMMAND_CLASS_ASSOCIATION_V2-->
<CommandClass id="133">
<Instance index="1"/>
<Associations num_groups="1">
Expand Down
2 changes: 1 addition & 1 deletion config/manufacturer_specific.xml
View file
Expand Up @@ -929,7 +929,7 @@
<Manufacturer id="0011" name="iCOM Technology b.v."></Manufacturer>
<Manufacturer id="0106" name="Icontrol Networks"></Manufacturer>
<Manufacturer id="0373" name="ID Lock AS">
<Product config="idlock/idlock150.xml" id="0001" name="150" type="0003"/>
<Product config="idlock/idlock150.xml" id="0001" name="ID-150 Z-Wave Module" type="0003"/>
</Manufacturer>
<Manufacturer id="019E" name="iEXERGY GmbH"></Manufacturer>
<Manufacturer id="031C" name="Ilevia srl"></Manufacturer>
Expand Down

0 comments on commit 4c76375

Please sign in to comment.