0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 true Basic status of the node 2 Revision of the Config file currently loaded Revision of the Config file on the File System Latest Revision of the Config file available for download Manufacturer Specific Device ID/Model Device Serial Number 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 http://www.openzwave.com/device-database/0118:0002:0003 https://products.z-wavealliance.org/products/1952/ images/wenzhou/tz68.png 1. This plug-in ON/OFF switch in a transceiver which is a Z-Wave enabled device and is fully compatible with any Z-Wave enabled network. 2. Each socket is designed to act as a repeater. Repeaters will re-transmit the RF signal to ensure the signal to ensure that the signal is received by its intended destination. 3. You can use the button in the socket to include/exclude, manually on/off or act as a indicator. You can use it to turn on/off appliance remotely via smart home or computer. https://Products.Z-WaveAlliance.org/ProductManual/File?folder=&filename=Manuals/1952/TZ68 User Manual.pdf 1. Have Z-Wave controller with inclusion mode 2. Press the socket on/off button three times within 1.5 seconds to be included to the controller 1. Have Z-Wave controller with exclusion mode 2. Press the socket on/off button three times within 1.5 seconds to be excluded from the controller 1. Press the socket on/off button three times within 1.5 seconds 2. then within 1 second to press and hold on for 5 seconds until the socket button LED is off, reset to factory default successfully 3. Use this procedure only in the event that the network primary controller is missing or otherwise inoperable CEPT (Europe) / Brazil / China Smart Plug in Switch TZ68CN Initial Metadata Import from Z-Wave Alliance Database - https://products.z-wavealliance.org/products/1423/xml Updated Metadata Import from Z-Wave Alliance Database - https://products.z-wavealliance.org/products/1948/xml Updated Metadata Import from Z-Wave Alliance Database - https://products.z-wavealliance.org/products/1952/xml 37 1 true 4 1 true 0 Turn On/Off Device 1 true 4 Switch All Devices On/Off 1 true 4 1 true 6 ZWave+ Version Supported on the Device Icon File to use for the Installer Application Icon File to use for the User Application 1 true 4 Defines the behavior of the blue LED. 2 true 0 Revision of the Config file currently loaded Revision of the Config file on the File System Latest Revision of the Config file available for download Manufacturer Specific Device ID/Model Device Serial Number 1 true 4 Output RF PowerLevel Timeout till the PowerLevel is reset to Normal Apply the Output PowerLevel and Timeout Values Node to Perform a test against PowerLevel to use for the Test How Many Messages to send to the Note for the Test Perform a PowerLevel Test against the a Node Get the results of the latest PowerLevel Test against a Node The Current Status of the last PowerNode Test Executed Number of Messages successfully Acked by the Target Node 1 true 4 1 true 4 Z-Wave Library Version Z-Wave Protocol Version Application Version