Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

modified hints file for UnixWare7 ( svr5) #817

Closed
p5pRT opened this issue Nov 4, 1999 · 1 comment
Closed

modified hints file for UnixWare7 ( svr5) #817

p5pRT opened this issue Nov 4, 1999 · 1 comment

Comments

@p5pRT
Copy link
Collaborator

@p5pRT p5pRT commented Nov 4, 1999

Migrated from rt.perl.org#1745 (status was 'resolved')

Searchable as RT1745$

@p5pRT

This comment has been minimized.

Copy link
Collaborator Author

@p5pRT p5pRT commented Nov 4, 1999

From hops@scoot.pdev.sco.com

heres a modofied hints file for UnixWare7 - changes and deletions as
suggested by Andy Dougherty to the last update of the svr5 hints file.

This works for generating perl5.005_03 that passed all tests when built
with either gcc-2.95.1 or the native devsys both with and without
-Dusethreads

# svr5 hints, System V Release 5.x (UnixWare 7)
# mods after mail fm Andy Dougherty
# Reworked by hops@​sco.com Sept/Oct 1999 for UW7.1 platform support
# Boyd Gerber, gerberb@​zenez.com 1999/09/21 for threads support.
# Originally taken from svr4 hints.sh 21-Sep-98 hops@​sco.com
# which was version of 1996/10/25 by Tye McQueen, tye@​metronet.com

# Use Configure -Dusethreads to enable threads.
# Use Configure -Dcc=gcc to use gcc.
case "$cc" in
*gcc*)
  # "$gccversion" not set yet
  vers=`gcc -v 2>&1 | sed -n -e 's@​.*version \([^ ][^ ]*\) .*@​\1@​p'`
  case $vers in
  *2.95*)
  ccflags='-fno-strict-aliasing'
  # More optimisation provided in gcc-2.95 causes miniperl to segv.
  # -fno-strict-aliasing is supposed to correct this but
  # if it doesn't and you get segv when the build runs miniperl then
  # disable optimisation as below
  # optimize=' '
  ;;
  esac
  ;;
esac

# Hardwire the processor to 586 for consistancy with autoconf
# archname='i586-svr5'
# -- seems this is generally disliked by perl porters so leave it to float

# Our default setup excludes anything from /usr/ucblib (and consequently dbm)
# as later modules assume symbols found are available in shared libs
# On svr5 these are static archives which causes problems for
# dynamic modules loaded later (and ucblib is a bad dream anyway)
#
# However there is a dbm library built from the ucb sources outside ucblib
# at http​://www.sco.com/skunkware (installing into /usr/local) so if we
# detect this we'll use it. You can change the default
# (to allow ucblib and its dbm or disallowing non ucb dbm) by
# changing 'want_*' config values below to '' to disable or otherwise to enable

# Leave leading tabs so Configure doesn't propagate variables to config.sh

  want_ucb='' # don't use anything from /usr/ucblib - icky
  want_dbm='yes' # use dbm if can find library in /usr/local/lib
  want_gdbm='yes' # use gdbm if can find library in /usr/local/lib
  want_udk70='' # link with old static libc pieces
  # link with udk70 if building on 7.1 abd want resulting binary
  # to run on uw7.0* - it will link in referenced static symbols
  # of libc that are (now) in the shared libc.so on 7.1 but were
  # not there in 7.0.
  # There are still scenarios where this is still insufficient so
  # overall it is preferable to get ptf7051e
  # ftp​://ftp.sco.com/SLS/ptf7051e.Z
  # installed on any/all 7.0 systems and leave the above unset.

if [ "$want_ucb" ] ; then
  ldflags= '-L/usr/ucblib'
  ccflags='-I/usr/ucbinclude'
  # /usr/ccs/include and /usr/ccs/lib are used implicitly by cc as reqd
else
  libswanted=`echo " $libswanted " | sed -e 's/ ucb / /'`
  glibpth=`echo " $glibpth " | sed -e 's/ \/usr\/ucblib / /'`

  # If see libdbm in /usr/local and not overidden assume its the
  # non ucblib rebuild from skunkware and use it
  if [ ! -f /usr/local/lib/libdbm.so -o ! "$want_dbm" ] ; then
  i_dbm='undef'
  libswanted=`echo " $libswanted " | sed -e 's/ dbm / /'`
  fi
fi

if [ ! "$want_gdbm" ] ; then
  i_gdbm='undef'
  libswanted=`echo " $libswanted " | sed -e 's/ gdbm / /'`
fi

# Don't use problematic libraries​:
# libmalloc.a - Probably using Perl's malloc() anyway.
# libc​: on UW7 don't want -lc explicitly as native cc gives warnings/errors
libswanted=`echo " $libswanted " | sed -e 's/ malloc / /' -e 's/ c / /'`

# remove /shlib and /lib from library search path as both symlink to /usr/lib
# where runtime shared libc is
glibpth=`echo " $glibpth " | sed -e 's/ \/shlib / /' -e 's/ \/lib / /`

# Don't use BSD emulation pieces (/usr/ucblib) regardless
# these would probably be autonondetected anyway but ...
d_Gconvert='gcvt((x),(n),(b))' # Try gcvt() before gconvert().
d_bcopy='undef' d_bcmp='undef' d_bzero='undef' d_safebcpy='undef'
d_index='undef' d_killpg='undef' d_getprior='undef' d_setprior='undef'
d_setlinebuf='undef'
d_setregid='undef' d_setreuid='undef' # -- in /usr/lib/libc.so.1

# Broken C-Shell tests (Thanks to Tye McQueen)​:
# The OS-specific checks may be obsoleted by the this generic test.
  sh_cnt=`sh -c 'echo /*' | wc -c`
  csh_cnt=`csh -f -c 'glob /*' 2>/dev/null | wc -c`
  csh_cnt=`expr 1 + $csh_cnt`
if [ "$sh_cnt" -ne "$csh_cnt" ]; then
  echo "You're csh has a broken 'glob', disabling..." >&2
  d_csh='undef'
fi

# Unixware-specific problems. UW7 give correctname with uname -s
# UnixWare has a broken csh. (This might already be detected above).
# Configure can't detect memcpy or memset on Unixware 2 or 7
#
# Leave leading tabs on the next two lines so Configure doesn't
# propagate these variables to config.sh
  uw_ver=`uname -v`
  uw_isuw=`uname -s 2>&1`

if [ "$uw_isuw" = "UnixWare" ]; then
  case $uw_ver in
  7.1*)
  d_csh='undef'
  d_memcpy='define'
  d_memset='define'
  stdio_cnt='((fp)->__cnt)'
  d_stdio_cnt_lval='define'
  stdio_ptr='((fp)->__ptr)'
  d_stdio_ptr_lval='define'

  d_bcopy='define' # In /usr/lib/libc.so.1
  d_setregid='define' # "
  d_setreuid='define' # "

  if [ -f /usr/ccs/lib/libcudk70.a -a "$want_udk70" ] ; then
  libswanted=" $libswanted cudk70"
  fi
  ;;
  7*)
  d_csh='undef'
  d_memcpy='define'
  d_memset='define'
  stdio_cnt='((fp)->__cnt)'
  d_stdio_cnt_lval='define'
  stdio_ptr='((fp)->__ptr)'
  d_stdio_ptr_lval='define'
  ;;
  esac
fi
# End of Unixware-specific tests.

###############################################################
# Dynamic loading section​: Is default so it should just happen.
# set below to explicitly force.
# usedl='define'
# dlext='so'
# dlsrc='dl_dlopen.xs'
#
# ccdlflags : must tell the linker to export all global symbols
# cccdlflags​: must tell the compiler to generate relocatable code
# lddlflags : must tell the linker to output a shared library

# use shared perl lib
useshrplib='true'

case "$cc" in
  *gcc*)
  ccdlflags='-Xlinker -Bexport '
  cccdlflags='-fpic'
  lddlflags='-G '
  ;;

  *)
  ccdlflags='-Wl,-Bexport'
  cccdlflags='-Kpic'
  lddlflags='-G -Wl,-Bexport'
  ;;
esac

############################################################################
# Thread support
# use Configure -Dusethreads to enable
# This script UU/usethreads.cbu will get 'called-back' by Configure
# after it has prompted the user for whether to use threads.
cat > UU/usethreads.cbu <<'EOCBU'
case "$usethreads" in
$define|true|[yY]*)
  ccflags="$ccflags"
  shift
  libswanted="$*"
  case "$cc" in
  *gcc*)
  ccflags="-D_REENTRANT $ccflags -fpic -pthread"
  cccdlflags='-fpic'
  lddlflags='-pthread -G '
  ;;
  *)
  ccflags="-D_REENTRANT $ccflags -KPIC -Kthread"
  ccdlflags='-Kthread -Wl,-Bexport'
  cccdlflags='-KPIC -Kthread'
  lddlflags='-G -Kthread -Wl,-Bexport '
  ldflags='-Kthread'
  ;;
  esac
esac
EOCBU

d_suidsafe='define' # "./Configure -d" can't figure this out easily

################## final caveat msgs to builder ###############
cat <<'EOM' >&4

If you wish to use dynamic linking, you must use
  LD_LIBRARY_PATH=`pwd`; export LD_LIBRARY_PATH
or
  setenv LD_LIBRARY_PATH `pwd`
before running make.

If you are using shared libraries from /usr/local/lib
for libdbm or libgdbm you may need to set
  LD_RUN_PATH=/usr/local/lib; export LD_RUN_PATH
in order for Configure to compile the simple test program

EOM

Perl Info


Site configuration information for perl 5.00503:

Configured by hops at Sun Sep 26 16:52:59 PDT 1999.

Summary of my perl5 (5.0 patchlevel 5 subversion 3) configuration:
  Platform:
    osname=svr5, osvers=7.1.0, archname=i386-svr5
    uname='unixware scoot 5 7.1.0 i386 x86at sco unix_svr5 '
    hint=recommended, useposix=true, d_sigaction=define
    usethreads=undef useperlio=undef d_sfio=undef
  Compiler:
    cc='/bin/cc', optimize='-O', gccversion=
    cppflags='-I/usr/local/include'
    ccflags ='-I/usr/local/include'
    stdchar='unsigned char', d_stdstdio=define, usevfork=false
    intsize=4, longsize=4, ptrsize=4, doublesize=8
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
    alignbytes=4, usemymalloc=y, prototype=define
  Linker and Libraries:
    ld='/bin/cc', ldflags =' -L/usr/local/lib'
    libpth=/usr/local/lib /usr/lib /usr/ccs/lib
    libs=-lsocket -lnsl -lgdbm -ldbm -ldl -lld -lm -lcrypt
    libc=/usr/lib/libc.so.1, so=so, useshrplib=true, libperl=libperl.so.503
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-Bexport -L/usr/local/lib'
    cccdlflags='-Kpic', lddlflags='-G -Wl,-Bexport -L/usr/local/lib'

Locally applied patches:
    


@INC for perl 5.00503:
    /usr/local/lib/perl5/5.00503/i386-svr5
    /usr/local/lib/perl5/5.00503
    /usr/local/lib/perl5/site_perl/5.005/i386-svr5
    /usr/local/lib/perl5/site_perl/5.005
    .


Environment for perl 5.00503:
    HOME=/home/hops
    LANG=C
    LANGUAGE (unset)
    LD_LIBRARY_PATH=/home/hops/src/skw/perl/perl5.005_03
    LOGDIR (unset)
    PATH=/home/hops/bin:/home/hops/bin/tcl:/usr/local/bin:/opt/bin:/usr/bin/X11:/usr/bin:/usr/ccs/bin:/usr/sbin:/usr/java/bin:/sbin:/etc:/usr/ucb:.
    PERL_BADLANG (unset)
    SHELL=/usr/local/bin/bash

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Projects
None yet
Linked pull requests

Successfully merging a pull request may close this issue.

None yet
1 participant
You can’t perform that action at this time.