Bug fixes

Warning: MAC address will be changed if you just upgrade the device(miner) from older version of operating system image. Then it will be fixed, unless re-install(flash) operating system image.

Reference: HOW TO INSTALLING OPERATING SYSTEM IMAGES

Downloads

This release begins to support DHCP dynamic IP leasing, officially.

Warning: MAC address will be changed if you just upgrade the device(miner) from older version of operating system image. Then it will be fixed, unless re-install(flash) operating system image.

Reference: HOW TO INSTALLING OPERATING SYSTEM IMAGES

Downloads

DR2.160805

@tomasen tomasen released this Aug 8, 2016 · 5 commits to master since this release

This release added an experimental feature that supports DHCP dynamic IP leasing.

Warning: MAC address will be changed every time you clicked the 'save' button in the network panel.

Reference: HOW TO INSTALLING OPERATING SYSTEM IMAGES

Downloads

PinIdea ASIC X11 Miner DR-1/DU-1 v1.0.7

@soleo soleo released this Jun 7, 2016 · 9 commits to master since this release

Installation

Download one of the releases from the release page directly.

See the install docs for more install options and instructions.

Usage

Windows Usage

$ cgminer.exe --x11 -o "stratum+tcp://url:port" -u xxxx -p x \
--dr1-clk 400 --dr1-fan LV3 -S //./COM5

USB miner usage:

$ cgminer.exe --x11 -o "stratum+tcp://url:port" -u xxxx -p x --dr1-clk 200 --dr1-fan LV3  -S //./COM352 --du1

Linux (Ubuntu) Usage

curl curses dev library

$ sudo apt-get install -y libcurl4-openssl-dev libncurses5-dev
$ cgminer --x11 -o "stratum+tcp://url:port" -u xxx -p x \
--dr1-clk 400 --dr1-fan LV3 -S /dev/ttyUSB0

USB Usage:

$ ./cgminer --x11 -o "stratum+tcp://url:port" -u xxx -p x --dr1-clk 400 --dr1-fan LV3 -S /dev/ttyUSB0 --du1 

Raspberry Pi Usage

Pi DEPENDENCIES:

curl curses dev library

$ sudo apt-get install -y libcurl4-openssl-dev libncurses5-dev

Usage:

$ cgminer --x11 -o "stratum+tcp://url:port" \
                -u xxx -p x --dr1-clk 400 \
                --dr1-fan LV3 -S /dev/ttyUSB0

USB Usage:

$ ./cgminer --x11 -o "stratum+tcp://url:port" -u xxx -p x --dr1-clk 400 --dr1-fan LV3 -S /dev/ttyUSB0 --du1 

Parameters for cgminer added by PinIdea

Parameter Description
--dr1-cutoff-temp Set DR1 overheat cut off temperature (default: 45)
--dr1-cutoff-fan Set DR1 too slow cut off fanspeed (default: 0)
--dr1-clk Set frequency for DR1, (default: 200) 200/250/300/400
--dr1-asic-x Set asic x num (default:10)
--dr1-asic-y Set asic y num (default:6)
--dr1-check-testnonce Set DR1 check nonce before submit to server
--dr1-scan-serial|-S 1. Direct serial I/O, manual port specification
(Linux)
--dr1-scan-serial /dev/ttyUSB0 --dr1-scan-serial /dev/ttyUSB1
(Windows)
--dr1-scan-serial //./COM5
2. Direct serial I/O, auto-detect ports
(Linux only)
--dr1-scan-serial dr1:auto
--dr1-asic-status Set DR1 status refresh interval (default: 300 Seconds)
--dr1-fan Set fanspeed percentage for DR1, single value or range (default: LV3 )(LV1/LV2/LV3)
--du1 Just for miniusb mining,if set minidr will auto ignore --dr1-asic-x --dr1-asic-y --dr1-cutoff-temp --drl-cutoff-fan

Changelog

  1. Add delay for config miner.
  2. Fix du1 show incorrect in miner console.
  3. Change miner version to 1.0.7

Checksums

  • cgminer-dr1-pi.zip
    • sha256 6c1a316edbd73db0597c6c321c7dd88e93068508ed75d7250d628e998a1ee3b5
    • md5 a5a35b1b3e7d12fbcb4a5cfefd5c9496
  • cgminer-dr1-ubuntu32.zip
    • sha256 9f7104a1c0c488350fd6a470fc6f933c2062745961cafc29617ede2f0beab549
    • md5 c46ce7f7e11c80668952db6bb4593ef4
  • cgminer-dr1-ubuntu64.zip
    • sha256 9874cb18417f244a3f8d6944bfcf0907f05bd98027ced88c005ad817212e6e4a
    • md5 f6a8c2b6d791a365280989c85b96e2d8
  • cgminer-dr1-win.zip
    • sha256 15e245b7a56a3df8428a11a580dacd14eb21ca4dd9e677b54dec6f1163f8d989
    • md5 30e823b8e1a8b473f174364e858095d8

Downloads

PinIdea ASIC X11 Miner DR-1/DU-1 v1.0.6

@soleo soleo released this Jun 2, 2016 · 11 commits to master since this release

Installation

Download one of the releases from the release page directly.

See the install docs for more install options and instructions.

Usage

Windows Usage

$ cgminer.exe --x11 -o "stratum+tcp://url:port" -u xxxx -p x \
--dr1-clk 400 --dr1-fan LV3 -S //./COM5

USB miner usage:

$ cgminer.exe --x11 -o "stratum+tcp://url:port" -u xxxx -p x --dr1-clk 200 --dr1-fan LV3  -S //./COM352 --du1

Linux (Ubuntu) Usage

curl curses dev library

$ sudo apt-get install -y libcurl4-openssl-dev libncurses5-dev
$ cgminer --x11 -o "stratum+tcp://url:port" -u xxx -p x \
--dr1-clk 400 --dr1-fan LV3 -S /dev/ttyUSB0

USB Usage:

$ ./cgminer --x11 -o "stratum+tcp://url:port" -u xxx -p x --dr1-clk 400 --dr1-fan LV3 -S /dev/ttyUSB0 --du1 

Raspberry Pi Usage

Pi DEPENDENCIES:

curl curses dev library

$ sudo apt-get install -y libcurl4-openssl-dev libncurses5-dev

Usage:

$ cgminer --x11 -o "stratum+tcp://url:port" \
                -u xxx -p x --dr1-clk 400 \
                --dr1-fan LV3 -S /dev/ttyUSB0

USB Usage:

$ ./cgminer --x11 -o "stratum+tcp://url:port" -u xxx -p x --dr1-clk 400 --dr1-fan LV3 -S /dev/ttyUSB0 --du1 

Parameters for cgminer added by PinIdea

Parameter Description
--dr1-cutoff-temp Set DR1 overheat cut off temperature (default: 45)
--dr1-cutoff-fan Set DR1 too slow cut off fanspeed (default: 0)
--dr1-clk Set frequency for DR1, (default: 200) 200/250/300/400
--dr1-asic-x Set asic x num (default:10)
--dr1-asic-y Set asic y num (default:6)
--dr1-check-testnonce Set DR1 check nonce before submit to server
--dr1-scan-serial|-S 1. Direct serial I/O, manual port specification
(Linux)
--dr1-scan-serial /dev/ttyUSB0 --dr1-scan-serial /dev/ttyUSB1
(Windows)
--dr1-scan-serial //./COM5
2. Direct serial I/O, auto-detect ports
(Linux only)
--dr1-scan-serial dr1:auto
--dr1-asic-status Set DR1 status refresh interval (default: 300 Seconds)
--dr1-fan Set fanspeed percentage for DR1, single value or range (default: LV3 )(LV1/LV2/LV3)
--du1 Just for miniusb mining,if set minidr will auto ignore --dr1-asic-x --dr1-asic-y --dr1-cutoff-temp --drl-cutoff-fan

Changelog

Add DU-1 Support

Checksums

  • cgminer-dr1-pi.zip
    • sha256 dc849d3b63b9eaa296fc8a3c139cad34badc4e36a2161d3af7ce5212146e785a
    • md5 cfb8670d75b5e7b88efbd974b582459c
  • cgminer-dr1-ubuntu32.zip
    • sha256 c913bd630fc6c850f7f9bcab3c3b0c5c3e37e30a4d84fb5e15f4ea0a3d5eff66
    • md5 c2a4a97287d19d0da640e0f2a105c5fe
  • cgminer-dr1-ubuntu64.zip
    • sha256 6a559b4e30c1d19b2f03715df66c0d2bf40775b52618389330570d315a4bb529
    • md5 764d4db08c6dd2200270a48f182e0c0f
  • cgminer-dr1-win.zip
    • sha256 9992c69fb95bc8f1e8e2aa52fc1a51cfbc5b235b1a5df4d461dd5535941e9661
    • md5 07a064d66e5e5912378202d997e67740

Downloads

PinIdea ASIC X11 Miner DR-1 v1.0.5

@soleo soleo released this May 16, 2016 · 16 commits to master since this release

Installation

Download one of the releases from the release page directly.

See the install docs for more install options and instructions.

Usage

Windows Usage

$ cgminer.exe --x11 -o "stratum+tcp://url:port" -u xxxx -p x \
--dr1-clk 400 --dr1-fan LV3 -S //./COM5

Linux (Ubuntu) Usage

$ cgminer --x11 -o "stratum+tcp://url:port" -u xxx -p x \
--dr1-clk 400 --dr1-fan LV3 -S /dev/ttyUSB0

Raspberry Pi Usage

Pi DEPENDENCIES:

curl curses dev library

$ sudo apt-get install -y libcurl4-openssl-dev libncurses5-dev

Usage:

$ cgminer --x11 -o "stratum+tcp://url:port" \
                -u xxx -p x --dr1-clk 400 \
                --dr1-fan LV3 -S /dev/ttyUSB0

Parameters for cgminer added by PinIdea

Parameter Description
--dr1-cutoff-temp Set DR1 overheat cut off temperature (default: 45)
--dr1-cutoff-fan Set DR1 too slow cut off fanspeed (default: 0)
--dr1-clk Set frequency for DR1, (default: 200) 200/250/300/400
--dr1-asic-x Set asic x num (default:10)
--dr1-asic-y Set asic y num (default:6)
--dr1-check-testnonce Set DR1 check nonce before submit to server
--dr1-scan-serial|-S 1. Direct serial I/O, manual port specification
(Linux)
--dr1-scan-serial /dev/ttyUSB0 --dr1-scan-serial /dev/ttyUSB1
(Windows)
--dr1-scan-serial //./COM5
2. Direct serial I/O, auto-detect ports
(Linux only)
--dr1-scan-serial dr1:auto
--dr1-fan Set fanspeed percentage for DR1, single value or range (default: LV3 )(LV1/LV2/LV3)

Changelog

  • Removed --dr1-asic-status

Checksums

  • cgminer-dr1-pi.zip
    • sha256 8dd8f2b092e0378ae7739cbd13adb4d615a101e3786897a29d3b98037ddc850e
    • md5 f98e9670f8314b025303905d38b1b4c4
  • cgminer-dr1-ubuntu32.zip
    • sha256 a8161ce75c039523efa86695bd578d0f642be147162d2ca5d214d8681fdfa4fb
    • md5 c3fba22fea2f2f3473cde99ff5988105
  • cgminer-dr1-ubuntu64.zip
    • sha256 b6dc278ff9393c0b44d66327c6952b9ee90dfde16e80ae04b922533525c88ae8
    • md5 75b999055acc8e5ae174630f7b49425a
  • cgminer-dr1-win.zip
    • sha256 34463db9365d9376d8a7a76195f754ca1214d6fde9d2b311c757dc3d23a71972
    • md5 0509b1aa2f4ac90862ef9c5bcdb1395f

Downloads

PinIdea ASIC X11 Miner DR-1 v1.0.4

@soleo soleo released this May 9, 2016 · 18 commits to master since this release

Installation

Download one of the releases from the release page directly.

See the install docs for more install options and instructions.

Usage

Windows Usage

$ cgminer.exe --x11 -o "stratum+tcp://url:port" -u xxxx -p x \
--dr1-clk 400 --dr1-fan LV3 -S //./COM5

Linux (Ubuntu) Usage

rely on curl curses dev library

$ sudo apt-get install -y libcurl4-openssl-dev libncurses5-dev
$ cgminer --x11 -o "stratum+tcp://url:port" -u xxx -p x \
--dr1-clk 400 --dr1-fan LV3 -S /dev/ttyUSB0

Raspberry Pi Usage

Pi DEPENDENCIES:

curl curses dev library

$ sudo apt-get install -y libcurl4-openssl-dev libncurses5-dev

Usage:

$ cgminer --x11 -o "stratum+tcp://url:port" \
                -u xxx -p x --dr1-clk 400 \
                --dr1-fan LV3 -S /dev/ttyUSB0

Parameters for cgminer added

Parameter Description
--dr1-cutoff-temp Set DR1 overheat cut off temperature (default: 45)
--dr1-cutoff-fan Set DR1 too slow cut off fanspeed (default: 0)
--dr1-clk Set frequency for DR1, (default: 200) 200/250/300/400
--dr1-asic-x Set asic x num (default:10)
--dr1-asic-y Set asic y num (default:6)
--dr1-check-testnonce Set DR1 check nonce before submit to server
--dr1-scan-serial|-S 1. Direct serial I/O, manual port specification
(Linux)
--dr1-scan-serial /dev/ttyUSB0 --dr1-scan-serial /dev/ttyUSB1
(Windows)
--dr1-scan-serial //./COM5
2. Direct serial I/O, auto-detect ports
(Linux only)
--dr1-scan-serial dr1:auto
--dr1-asic-status Set DR1 status refresh interval (default: 300 Seconds)
--dr1-fan Set fanspeed percentage for DR1, single value or range (default: LV3 )(LV1/LV2/LV3)

Changelog

  • Fix: miner slow when diff is very high.
  • Fix: can not miner one more devices.
  • Fix: calc local hashrate not correct.
  • Update --dr1-fan
    --dr1-fan Set fanspeed percentage for DR1, single value or range (default: LV3 )(LV1/LV2/LV3)

Checksums

  • cgminer-dr1-pi.zip
    • sha256 d8f73ce5b609e4fda7daf0570414ac1230584a173277744da20a1be9c52163c1
    • md5 860279f447ee85a8420571804b1182fb
  • cgminer-dr1-ubuntu32.zip
    • sha256 3235a8fc772c3032c1103ac6ae129a5a0c1730a410d889519513068092707ff4
    • md5 29cf870f2bdbccf7d216f4891b85d4d1
  • cgminer-dr1-ubuntu64.zip
    • sha256 edf6f9a8d44a69e2f175342bf2ff05810f2ab9fb66e11214788e60f3af4ba644
    • md5 cef9c829497af98438d69f60058163b8
  • cgminer-dr1-win.zip
    • sha256 a377f7f74e15b0fc30cef16e1833ad7c45da2d34e96ceaa160a90768c02b3cb6
    • md5 71f85ea5140748ea61084421b0567290

Downloads

PinIdea ASIC X11 Miner DR-1 v1.0.3

@soleo soleo released this May 4, 2016 · 20 commits to master since this release

Major Change

--dr1-asic-status is added for checking regularly. The mining software is more stable now.

DR-1 miner parameters description:

--dr1-cutoff-temp  
           Set DR1 overheat cut off temperature (default: 45)  
--dr1-cutoff-fan   
           Set DR1 too slow cut off fanspeed (default: 0)
--dr1-fan          
           Set fanspeed percentage for DR1, single value or range (default: LV5 )(LV1/LV2/LV3/LV4/LV5)
--dr1-clk          
           Set frequency for DR1, (default: 200) 200/250/300/400
--dr1-asic-x       
           Set asic x num (default:10)
--dr1-asic-y       
           Set asic y num (default:6)
--dr1-check-testnonce 
           Set DR1 check nonce before submit to server
--dr1-scan-serial|-S 
           [# 
               Direct serial I/O, manual port specification 
               (Linux) --dr1-scan-serial /dev/ttyUSB0 --dr1-scan-serial /dev/ttyUSB1 
               (Windows) --dr1-scan-serial //./COM5
           ]
           [# Direct serial I/O, auto-detect ports (Linux only)--dr1-scan-serial dr1:auto]
--dr1-asic-status   Set DR1 status refresh interval (default: 300 Seconds)

Windows Usage

cgminer.exe --x11 -o "stratum+tcp://url:port" -u xxxx -p x --dr1-clk 400 --dr1-fan LV5 -S //./COM5

Linux (Ubuntu) Usage

./cgminer --x11 -o "stratum+tcp://url:port" -u xxx -p x --dr1-clk 400 --dr1-fan LV5 -S /dev/ttyUSB0

Raspberry Pi Usage

Pi DEPENDENCIES :
curl dev library
(sudo apt-get install libcurl4-openssl-dev)

curses dev library
(sudo apt-get install libncurses5-dev)

Usage:

./cgminer --x11 -o "stratum+tcp://url:port" -u xxx -p x --dr1-clk 400 --dr1-fan LV5 -S /dev/ttyUSB0

SHA-1 Checksum

2669d2eb9251ed5c3bb8227e1e59c68834a10092  cgminer-dr1-pi.zip
b678f2c01ce35a387288bdec4b128cd1d833c5ab  cgminer-dr1-ubuntu32.zip
b72e7a107790fbd6458fa3af7a667bbaa23d5b87  cgminer-dr1-ubuntu64.zip
eaafaba6b48efad03307cd357b23bb1d6d3581db  cgminer-dr1-win.zip

Downloads