New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Fixing bent black flex cable clips on new 3ds systems #1185

Closed
FREEZX opened this Issue Jun 5, 2017 · 0 comments

Comments

1 participant
@FREEZX

FREEZX commented Jun 5, 2017

I made the mistake of not reading the warning before doing the hardmod on my system and ended up bending the black flex cable clips ( #681 ). I have a new 3ds xl system.
My home button and mic were not working (bottom left clips).
I tried several different things to bend the clips back into place but it wasn't holding the bend, there's no room for enough bending.
What i ended up doing was just sticking a few layers of tape (thin, cut with scissors) on the non-contact sides of the flex cables. Everything is working fine now.

Another issue i fixed was the flex cable for the analog stick, i guess i bent it too hard somehow and there was a very tiny gap at one of the lines the connecting part of the flex cable. i tried soldering the gap, but then i couldn't push back the cable in the flex clip.
What i ended up doing was cutting the bad part of the flex cable with scissors (about 2-3mm in) and putting it back like that. It's working well now.

Hope someone finds this useful

@Plailect Plailect closed this in cf27657 Jun 5, 2017

Repository owner locked and limited conversation to collaborators Jun 5, 2017

Sign up for free to subscribe to this conversation on GitHub. Already have an account? Sign in.