Skip to content
This repository
Browse code

ADD doxygen documentation generation

  • Loading branch information...
commit 9c646828e9128fd79eb51cbcf8506883472806b5 1 parent 54e9dd7
PowerKiKi authored May 19, 2009

Showing 1 changed file with 1,543 additions and 0 deletions. Show diff stats Hide diff stats

  1. 1,543  doc/doxygen/polukili.Doxyfile
1,543  doc/doxygen/polukili.Doxyfile
... ...
@@ -0,0 +1,1543 @@
  1
+# Doxyfile 1.5.9
  2
+
  3
+# This file describes the settings to be used by the documentation system
  4
+# doxygen (www.doxygen.org) for a project
  5
+#
  6
+# All text after a hash (#) is considered a comment and will be ignored
  7
+# The format is:
  8
+#       TAG = value [value, ...]
  9
+# For lists items can also be appended using:
  10
+#       TAG += value [value, ...]
  11
+# Values that contain spaces should be placed between quotes (" ")
  12
+
  13
+#---------------------------------------------------------------------------
  14
+# Project related configuration options
  15
+#---------------------------------------------------------------------------
  16
+
  17
+# This tag specifies the encoding used for all characters in the config file 
  18
+# that follow. The default is UTF-8 which is also the encoding used for all 
  19
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the 
  20
+# iconv built into libc) for the transcoding. See 
  21
+# http://www.gnu.org/software/libiconv for the list of possible encodings.
  22
+
  23
+DOXYFILE_ENCODING      = UTF-8
  24
+
  25
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded 
  26
+# by quotes) that should identify the project.
  27
+
  28
+PROJECT_NAME           = Polukili
  29
+
  30
+# The PROJECT_NUMBER tag can be used to enter a project or revision number. 
  31
+# This could be handy for archiving the generated documentation or 
  32
+# if some version control system is used.
  33
+
  34
+PROJECT_NUMBER         = 0.1
  35
+
  36
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) 
  37
+# base path where the generated documentation will be put. 
  38
+# If a relative path is entered, it will be relative to the location 
  39
+# where doxygen was started. If left blank the current directory will be used.
  40
+
  41
+OUTPUT_DIRECTORY       = .
  42
+
  43
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 
  44
+# 4096 sub-directories (in 2 levels) under the output directory of each output 
  45
+# format and will distribute the generated files over these directories. 
  46
+# Enabling this option can be useful when feeding doxygen a huge amount of 
  47
+# source files, where putting all generated files in the same directory would 
  48
+# otherwise cause performance problems for the file system.
  49
+
  50
+CREATE_SUBDIRS         = NO
  51
+
  52
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all 
  53
+# documentation generated by doxygen is written. Doxygen will use this 
  54
+# information to generate all constant output in the proper language. 
  55
+# The default language is English, other supported languages are: 
  56
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, 
  57
+# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, 
  58
+# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English 
  59
+# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, 
  60
+# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak, 
  61
+# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
  62
+
  63
+OUTPUT_LANGUAGE        = English
  64
+
  65
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will 
  66
+# include brief member descriptions after the members that are listed in 
  67
+# the file and class documentation (similar to JavaDoc). 
  68
+# Set to NO to disable this.
  69
+
  70
+BRIEF_MEMBER_DESC      = YES
  71
+
  72
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend 
  73
+# the brief description of a member or function before the detailed description. 
  74
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the 
  75
+# brief descriptions will be completely suppressed.
  76
+
  77
+REPEAT_BRIEF           = YES
  78
+
  79
+# This tag implements a quasi-intelligent brief description abbreviator 
  80
+# that is used to form the text in various listings. Each string 
  81
+# in this list, if found as the leading text of the brief description, will be 
  82
+# stripped from the text and the result after processing the whole list, is 
  83
+# used as the annotated text. Otherwise, the brief description is used as-is. 
  84
+# If left blank, the following values are used ("$name" is automatically 
  85
+# replaced with the name of the entity): "The $name class" "The $name widget" 
  86
+# "The $name file" "is" "provides" "specifies" "contains" 
  87
+# "represents" "a" "an" "the"
  88
+
  89
+ABBREVIATE_BRIEF       = "The $name class" \
  90
+                         "The $name widget" \
  91
+                         "The $name file" \
  92
+                         is \
  93
+                         provides \
  94
+                         specifies \
  95
+                         contains \
  96
+                         represents \
  97
+                         a \
  98
+                         an \
  99
+                         the
  100
+
  101
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then 
  102
+# Doxygen will generate a detailed section even if there is only a brief 
  103
+# description.
  104
+
  105
+ALWAYS_DETAILED_SEC    = NO
  106
+
  107
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all 
  108
+# inherited members of a class in the documentation of that class as if those 
  109
+# members were ordinary class members. Constructors, destructors and assignment 
  110
+# operators of the base classes will not be shown.
  111
+
  112
+INLINE_INHERITED_MEMB  = NO
  113
+
  114
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full 
  115
+# path before files name in the file list and in the header files. If set 
  116
+# to NO the shortest path that makes the file name unique will be used.
  117
+
  118
+FULL_PATH_NAMES        = YES
  119
+
  120
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag 
  121
+# can be used to strip a user-defined part of the path. Stripping is 
  122
+# only done if one of the specified strings matches the left-hand part of 
  123
+# the path. The tag can be used to show relative paths in the file list. 
  124
+# If left blank the directory from which doxygen is run is used as the 
  125
+# path to strip.
  126
+
  127
+STRIP_FROM_PATH        = /Users/dimitri/doxygen/mail/1.5.7/doxywizard/
  128
+
  129
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of 
  130
+# the path mentioned in the documentation of a class, which tells 
  131
+# the reader which header file to include in order to use a class. 
  132
+# If left blank only the name of the header file containing the class 
  133
+# definition is used. Otherwise one should specify the include paths that 
  134
+# are normally passed to the compiler using the -I flag.
  135
+
  136
+STRIP_FROM_INC_PATH    = 
  137
+
  138
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter 
  139
+# (but less readable) file names. This can be useful is your file systems 
  140
+# doesn't support long names like on DOS, Mac, or CD-ROM.
  141
+
  142
+SHORT_NAMES            = NO
  143
+
  144
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen 
  145
+# will interpret the first line (until the first dot) of a JavaDoc-style 
  146
+# comment as the brief description. If set to NO, the JavaDoc 
  147
+# comments will behave just like regular Qt-style comments 
  148
+# (thus requiring an explicit @brief command for a brief description.)
  149
+
  150
+JAVADOC_AUTOBRIEF      = NO
  151
+
  152
+# If the QT_AUTOBRIEF tag is set to YES then Doxygen will 
  153
+# interpret the first line (until the first dot) of a Qt-style 
  154
+# comment as the brief description. If set to NO, the comments 
  155
+# will behave just like regular Qt-style comments (thus requiring 
  156
+# an explicit \brief command for a brief description.)
  157
+
  158
+QT_AUTOBRIEF           = NO
  159
+
  160
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen 
  161
+# treat a multi-line C++ special comment block (i.e. a block of //! or /// 
  162
+# comments) as a brief description. This used to be the default behaviour. 
  163
+# The new default is to treat a multi-line C++ comment block as a detailed 
  164
+# description. Set this tag to YES if you prefer the old behaviour instead.
  165
+
  166
+MULTILINE_CPP_IS_BRIEF = NO
  167
+
  168
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented 
  169
+# member inherits the documentation from any documented member that it 
  170
+# re-implements.
  171
+
  172
+INHERIT_DOCS           = YES
  173
+
  174
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce 
  175
+# a new page for each member. If set to NO, the documentation of a member will 
  176
+# be part of the file/class/namespace that contains it.
  177
+
  178
+SEPARATE_MEMBER_PAGES  = NO
  179
+
  180
+# The TAB_SIZE tag can be used to set the number of spaces in a tab. 
  181
+# Doxygen uses this value to replace tabs by spaces in code fragments.
  182
+
  183
+TAB_SIZE               = 8
  184
+
  185
+# This tag can be used to specify a number of aliases that acts 
  186
+# as commands in the documentation. An alias has the form "name=value". 
  187
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to 
  188
+# put the command \sideeffect (or @sideeffect) in the documentation, which 
  189
+# will result in a user-defined paragraph with heading "Side Effects:". 
  190
+# You can put \n's in the value part of an alias to insert newlines.
  191
+
  192
+ALIASES                = 
  193
+
  194
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C 
  195
+# sources only. Doxygen will then generate output that is more tailored for C. 
  196
+# For instance, some of the names that are used will be different. The list 
  197
+# of all members will be omitted, etc.
  198
+
  199
+OPTIMIZE_OUTPUT_FOR_C  = NO
  200
+
  201
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java 
  202
+# sources only. Doxygen will then generate output that is more tailored for 
  203
+# Java. For instance, namespaces will be presented as packages, qualified 
  204
+# scopes will look different, etc.
  205
+
  206
+OPTIMIZE_OUTPUT_JAVA   = NO
  207
+
  208
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran 
  209
+# sources only. Doxygen will then generate output that is more tailored for 
  210
+# Fortran.
  211
+
  212
+OPTIMIZE_FOR_FORTRAN   = NO
  213
+
  214
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL 
  215
+# sources. Doxygen will then generate output that is tailored for 
  216
+# VHDL.
  217
+
  218
+OPTIMIZE_OUTPUT_VHDL   = NO
  219
+
  220
+# Doxygen selects the parser to use depending on the extension of the files it parses. 
  221
+# With this tag you can assign which parser to use for a given extension. 
  222
+# Doxygen has a built-in mapping, but you can override or extend it using this tag. 
  223
+# The format is ext=language, where ext is a file extension, and language is one of 
  224
+# the parsers supported by doxygen: IDL, Java, Javascript, C#, C, C++, D, PHP, 
  225
+# Objective-C, Python, Fortran, VHDL, C, C++. For instance to make doxygen treat 
  226
+# .inc files as Fortran files (default is PHP), and .f files as C (default is Fortran), 
  227
+# use: inc=Fortran f=C. Note that for custom extensions you also need to set
  228
+# FILE_PATTERNS otherwise the files are not read by doxygen.
  229
+
  230
+EXTENSION_MAPPING      = 
  231
+
  232
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want 
  233
+# to include (a tag file for) the STL sources as input, then you should 
  234
+# set this tag to YES in order to let doxygen match functions declarations and 
  235
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s. 
  236
+# func(std::string) {}). This also make the inheritance and collaboration 
  237
+# diagrams that involve STL classes more complete and accurate.
  238
+
  239
+BUILTIN_STL_SUPPORT    = NO
  240
+
  241
+# If you use Microsoft's C++/CLI language, you should set this option to YES to 
  242
+# enable parsing support.
  243
+
  244
+CPP_CLI_SUPPORT        = NO
  245
+
  246
+# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only. 
  247
+# Doxygen will parse them like normal C++ but will assume all classes use public 
  248
+# instead of private inheritance when no explicit protection keyword is present.
  249
+
  250
+SIP_SUPPORT            = NO
  251
+
  252
+# For Microsoft's IDL there are propget and propput attributes to indicate getter 
  253
+# and setter methods for a property. Setting this option to YES (the default) 
  254
+# will make doxygen to replace the get and set methods by a property in the 
  255
+# documentation. This will only work if the methods are indeed getting or 
  256
+# setting a simple type. If this is not the case, or you want to show the 
  257
+# methods anyway, you should set this option to NO.
  258
+
  259
+IDL_PROPERTY_SUPPORT   = YES
  260
+
  261
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC 
  262
+# tag is set to YES, then doxygen will reuse the documentation of the first 
  263
+# member in the group (if any) for the other members of the group. By default 
  264
+# all members of a group must be documented explicitly.
  265
+
  266
+DISTRIBUTE_GROUP_DOC   = NO
  267
+
  268
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of 
  269
+# the same type (for instance a group of public functions) to be put as a 
  270
+# subgroup of that type (e.g. under the Public Functions section). Set it to 
  271
+# NO to prevent subgrouping. Alternatively, this can be done per class using 
  272
+# the \nosubgrouping command.
  273
+
  274
+SUBGROUPING            = YES
  275
+
  276
+# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum 
  277
+# is documented as struct, union, or enum with the name of the typedef. So 
  278
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct 
  279
+# with name TypeT. When disabled the typedef will appear as a member of a file, 
  280
+# namespace, or class. And the struct will be named TypeS. This can typically 
  281
+# be useful for C code in case the coding convention dictates that all compound 
  282
+# types are typedef'ed and only the typedef is referenced, never the tag name.
  283
+
  284
+TYPEDEF_HIDES_STRUCT   = NO
  285
+
  286
+# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to 
  287
+# determine which symbols to keep in memory and which to flush to disk. 
  288
+# When the cache is full, less often used symbols will be written to disk. 
  289
+# For small to medium size projects (<1000 input files) the default value is 
  290
+# probably good enough. For larger projects a too small cache size can cause 
  291
+# doxygen to be busy swapping symbols to and from disk most of the time 
  292
+# causing a significant performance penality. 
  293
+# If the system has enough physical memory increasing the cache will improve the 
  294
+# performance by keeping more symbols in memory. Note that the value works on 
  295
+# a logarithmic scale so increasing the size by one will rougly double the 
  296
+# memory usage. The cache size is given by this formula: 
  297
+# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, 
  298
+# corresponding to a cache size of 2^16 = 65536 symbols
  299
+
  300
+SYMBOL_CACHE_SIZE      = 0
  301
+
  302
+#---------------------------------------------------------------------------
  303
+# Build related configuration options
  304
+#---------------------------------------------------------------------------
  305
+
  306
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in 
  307
+# documentation are documented, even if no documentation was available. 
  308
+# Private class members and static file members will be hidden unless 
  309
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
  310
+
  311
+EXTRACT_ALL            = YES
  312
+
  313
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class 
  314
+# will be included in the documentation.
  315
+
  316
+EXTRACT_PRIVATE        = NO
  317
+
  318
+# If the EXTRACT_STATIC tag is set to YES all static members of a file 
  319
+# will be included in the documentation.
  320
+
  321
+EXTRACT_STATIC         = NO
  322
+
  323
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) 
  324
+# defined locally in source files will be included in the documentation. 
  325
+# If set to NO only classes defined in header files are included.
  326
+
  327
+EXTRACT_LOCAL_CLASSES  = YES
  328
+
  329
+# This flag is only useful for Objective-C code. When set to YES local 
  330
+# methods, which are defined in the implementation section but not in 
  331
+# the interface are included in the documentation. 
  332
+# If set to NO (the default) only methods in the interface are included.
  333
+
  334
+EXTRACT_LOCAL_METHODS  = NO
  335
+
  336
+# If this flag is set to YES, the members of anonymous namespaces will be 
  337
+# extracted and appear in the documentation as a namespace called 
  338
+# 'anonymous_namespace{file}', where file will be replaced with the base 
  339
+# name of the file that contains the anonymous namespace. By default 
  340
+# anonymous namespace are hidden.
  341
+
  342
+EXTRACT_ANON_NSPACES   = NO
  343
+
  344
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all 
  345
+# undocumented members of documented classes, files or namespaces. 
  346
+# If set to NO (the default) these members will be included in the 
  347
+# various overviews, but no documentation section is generated. 
  348
+# This option has no effect if EXTRACT_ALL is enabled.
  349
+
  350
+HIDE_UNDOC_MEMBERS     = NO
  351
+
  352
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all 
  353
+# undocumented classes that are normally visible in the class hierarchy. 
  354
+# If set to NO (the default) these classes will be included in the various 
  355
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
  356
+
  357
+HIDE_UNDOC_CLASSES     = NO
  358
+
  359
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all 
  360
+# friend (class|struct|union) declarations. 
  361
+# If set to NO (the default) these declarations will be included in the 
  362
+# documentation.
  363
+
  364
+HIDE_FRIEND_COMPOUNDS  = NO
  365
+
  366
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any 
  367
+# documentation blocks found inside the body of a function. 
  368
+# If set to NO (the default) these blocks will be appended to the 
  369
+# function's detailed documentation block.
  370
+
  371
+HIDE_IN_BODY_DOCS      = NO
  372
+
  373
+# The INTERNAL_DOCS tag determines if documentation 
  374
+# that is typed after a \internal command is included. If the tag is set 
  375
+# to NO (the default) then the documentation will be excluded. 
  376
+# Set it to YES to include the internal documentation.
  377
+
  378
+INTERNAL_DOCS          = NO
  379
+
  380
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate 
  381
+# file names in lower-case letters. If set to YES upper-case letters are also 
  382
+# allowed. This is useful if you have classes or files whose names only differ 
  383
+# in case and if your file system supports case sensitive file names. Windows 
  384
+# and Mac users are advised to set this option to NO.
  385
+
  386
+CASE_SENSE_NAMES       = NO
  387
+
  388
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen 
  389
+# will show members with their full class and namespace scopes in the 
  390
+# documentation. If set to YES the scope will be hidden.
  391
+
  392
+HIDE_SCOPE_NAMES       = NO
  393
+
  394
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen 
  395
+# will put a list of the files that are included by a file in the documentation 
  396
+# of that file.
  397
+
  398
+SHOW_INCLUDE_FILES     = YES
  399
+
  400
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline] 
  401
+# is inserted in the documentation for inline members.
  402
+
  403
+INLINE_INFO            = YES
  404
+
  405
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen 
  406
+# will sort the (detailed) documentation of file and class members 
  407
+# alphabetically by member name. If set to NO the members will appear in 
  408
+# declaration order.
  409
+
  410
+SORT_MEMBER_DOCS       = YES
  411
+
  412
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the 
  413
+# brief documentation of file, namespace and class members alphabetically 
  414
+# by member name. If set to NO (the default) the members will appear in 
  415
+# declaration order.
  416
+
  417
+SORT_BRIEF_DOCS        = NO
  418
+
  419
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the 
  420
+# hierarchy of group names into alphabetical order. If set to NO (the default) 
  421
+# the group names will appear in their defined order.
  422
+
  423
+SORT_GROUP_NAMES       = NO
  424
+
  425
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be 
  426
+# sorted by fully-qualified names, including namespaces. If set to 
  427
+# NO (the default), the class list will be sorted only by class name, 
  428
+# not including the namespace part. 
  429
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. 
  430
+# Note: This option applies only to the class list, not to the 
  431
+# alphabetical list.
  432
+
  433
+SORT_BY_SCOPE_NAME     = NO
  434
+
  435
+# The GENERATE_TODOLIST tag can be used to enable (YES) or 
  436
+# disable (NO) the todo list. This list is created by putting \todo 
  437
+# commands in the documentation.
  438
+
  439
+GENERATE_TODOLIST      = YES
  440
+
  441
+# The GENERATE_TESTLIST tag can be used to enable (YES) or 
  442
+# disable (NO) the test list. This list is created by putting \test 
  443
+# commands in the documentation.
  444
+
  445
+GENERATE_TESTLIST      = YES
  446
+
  447
+# The GENERATE_BUGLIST tag can be used to enable (YES) or 
  448
+# disable (NO) the bug list. This list is created by putting \bug 
  449
+# commands in the documentation.
  450
+
  451
+GENERATE_BUGLIST       = YES
  452
+
  453
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or 
  454
+# disable (NO) the deprecated list. This list is created by putting 
  455
+# \deprecated commands in the documentation.
  456
+
  457
+GENERATE_DEPRECATEDLIST= YES
  458
+
  459
+# The ENABLED_SECTIONS tag can be used to enable conditional 
  460
+# documentation sections, marked by \if sectionname ... \endif.
  461
+
  462
+ENABLED_SECTIONS       = 
  463
+
  464
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines 
  465
+# the initial value of a variable or define consists of for it to appear in 
  466
+# the documentation. If the initializer consists of more lines than specified 
  467
+# here it will be hidden. Use a value of 0 to hide initializers completely. 
  468
+# The appearance of the initializer of individual variables and defines in the 
  469
+# documentation can be controlled using \showinitializer or \hideinitializer 
  470
+# command in the documentation regardless of this setting.
  471
+
  472
+MAX_INITIALIZER_LINES  = 30
  473
+
  474
+# If the sources in your project are distributed over multiple directories 
  475
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy 
  476
+# in the documentation. The default is NO.
  477
+
  478
+SHOW_DIRECTORIES       = NO
  479
+
  480
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page. 
  481
+# This will remove the Files entry from the Quick Index and from the 
  482
+# Folder Tree View (if specified). The default is YES.
  483
+
  484
+SHOW_FILES             = YES
  485
+
  486
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the 
  487
+# Namespaces page.  This will remove the Namespaces entry from the Quick Index 
  488
+# and from the Folder Tree View (if specified). The default is YES.
  489
+
  490
+SHOW_NAMESPACES        = YES
  491
+
  492
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that 
  493
+# doxygen should invoke to get the current version for each file (typically from 
  494
+# the version control system). Doxygen will invoke the program by executing (via 
  495
+# popen()) the command <command> <input-file>, where <command> is the value of 
  496
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file 
  497
+# provided by doxygen. Whatever the program writes to standard output 
  498
+# is used as the file version. See the manual for examples.
  499
+
  500
+FILE_VERSION_FILTER    = 
  501
+
  502
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed by 
  503
+# doxygen. The layout file controls the global structure of the generated output files 
  504
+# in an output format independent way. The create the layout file that represents 
  505
+# doxygen's defaults, run doxygen with the -l option. You can optionally specify a 
  506
+# file name after the option, if omitted DoxygenLayout.xml will be used as the name 
  507
+# of the layout file.
  508
+
  509
+LAYOUT_FILE            = 
  510
+
  511
+#---------------------------------------------------------------------------
  512
+# configuration options related to warning and progress messages
  513
+#---------------------------------------------------------------------------
  514
+
  515
+# The QUIET tag can be used to turn on/off the messages that are generated 
  516
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
  517
+
  518
+QUIET                  = NO
  519
+
  520
+# The WARNINGS tag can be used to turn on/off the warning messages that are 
  521
+# generated by doxygen. Possible values are YES and NO. If left blank 
  522
+# NO is used.
  523
+
  524
+WARNINGS               = YES
  525
+
  526
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings 
  527
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will 
  528
+# automatically be disabled.
  529
+
  530
+WARN_IF_UNDOCUMENTED   = YES
  531
+
  532
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for 
  533
+# potential errors in the documentation, such as not documenting some 
  534
+# parameters in a documented function, or documenting parameters that 
  535
+# don't exist or using markup commands wrongly.
  536
+
  537
+WARN_IF_DOC_ERROR      = YES
  538
+
  539
+# This WARN_NO_PARAMDOC option can be abled to get warnings for 
  540
+# functions that are documented, but have no documentation for their parameters 
  541
+# or return value. If set to NO (the default) doxygen will only warn about 
  542
+# wrong or incomplete parameter documentation, but not about the absence of 
  543
+# documentation.
  544
+
  545
+WARN_NO_PARAMDOC       = NO
  546
+
  547
+# The WARN_FORMAT tag determines the format of the warning messages that 
  548
+# doxygen can produce. The string should contain the $file, $line, and $text 
  549
+# tags, which will be replaced by the file and line number from which the 
  550
+# warning originated and the warning text. Optionally the format may contain 
  551
+# $version, which will be replaced by the version of the file (if it could 
  552
+# be obtained via FILE_VERSION_FILTER)
  553
+
  554
+WARN_FORMAT            = "$file:$line: $text"
  555
+
  556
+# The WARN_LOGFILE tag can be used to specify a file to which warning 
  557
+# and error messages should be written. If left blank the output is written 
  558
+# to stderr.
  559
+
  560
+WARN_LOGFILE           = 
  561
+
  562
+#---------------------------------------------------------------------------
  563
+# configuration options related to the input files
  564
+#---------------------------------------------------------------------------
  565
+
  566
+# The INPUT tag can be used to specify the files and/or directories that contain 
  567
+# documented source files. You may enter file names like "myfile.cpp" or 
  568
+# directories like "/usr/src/myproject". Separate the files or directories 
  569
+# with spaces.
  570
+
  571
+INPUT                  = ../../application/source ../../application/Editor
  572
+
  573
+# This tag can be used to specify the character encoding of the source files 
  574
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is 
  575
+# also the default input encoding. Doxygen uses libiconv (or the iconv built 
  576
+# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for 
  577
+# the list of possible encodings.
  578
+
  579
+INPUT_ENCODING         = UTF-8
  580
+
  581
+# If the value of the INPUT tag contains directories, you can use the 
  582
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp 
  583
+# and *.h) to filter out the source-files in the directories. If left 
  584
+# blank the following patterns are tested: 
  585
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx 
  586
+# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
  587
+
  588
+FILE_PATTERNS          = *.c \
  589
+                         *.cc \
  590
+                         *.cxx \
  591
+                         *.cpp \
  592
+                         *.c++ \
  593
+                         *.d \
  594
+                         *.java \
  595
+                         *.ii \
  596
+                         *.ixx \
  597
+                         *.ipp \
  598
+                         *.i++ \
  599
+                         *.inl \
  600
+                         *.h \
  601
+                         *.hh \
  602
+                         *.hxx \
  603
+                         *.hpp \
  604
+                         *.h++ \
  605
+                         *.idl \
  606
+                         *.odl \
  607
+                         *.cs \
  608
+                         *.php \
  609
+                         *.php3 \
  610
+                         *.inc \
  611
+                         *.m \
  612
+                         *.mm \
  613
+                         *.dox \
  614
+                         *.py \
  615
+                         *.f90 \
  616
+                         *.f \
  617
+                         *.vhd \
  618
+                         *.vhdl
  619
+
  620
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories 
  621
+# should be searched for input files as well. Possible values are YES and NO. 
  622
+# If left blank NO is used.
  623
+
  624
+RECURSIVE              = YES
  625
+
  626
+# The EXCLUDE tag can be used to specify files and/or directories that should 
  627
+# excluded from the INPUT source files. This way you can easily exclude a 
  628
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
  629
+
  630
+EXCLUDE                = 
  631
+
  632
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or 
  633
+# directories that are symbolic links (a Unix filesystem feature) are excluded 
  634
+# from the input.
  635
+
  636
+EXCLUDE_SYMLINKS       = NO
  637
+
  638
+# If the value of the INPUT tag contains directories, you can use the 
  639
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude 
  640
+# certain files from those directories. Note that the wildcards are matched 
  641
+# against the file with absolute path, so to exclude all test directories 
  642
+# for example use the pattern */test/*
  643
+
  644
+EXCLUDE_PATTERNS       = 
  645
+
  646
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names 
  647
+# (namespaces, classes, functions, etc.) that should be excluded from the 
  648
+# output. The symbol name can be a fully qualified name, a word, or if the 
  649
+# wildcard * is used, a substring. Examples: ANamespace, AClass, 
  650
+# AClass::ANamespace, ANamespace::*Test
  651
+
  652
+EXCLUDE_SYMBOLS        = 
  653
+
  654
+# The EXAMPLE_PATH tag can be used to specify one or more files or 
  655
+# directories that contain example code fragments that are included (see 
  656
+# the \include command).
  657
+
  658
+EXAMPLE_PATH           = 
  659
+
  660
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the 
  661
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp 
  662
+# and *.h) to filter out the source-files in the directories. If left 
  663
+# blank all files are included.
  664
+
  665
+EXAMPLE_PATTERNS       = *
  666
+
  667
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be 
  668
+# searched for input files to be used with the \include or \dontinclude 
  669
+# commands irrespective of the value of the RECURSIVE tag. 
  670
+# Possible values are YES and NO. If left blank NO is used.
  671
+
  672
+EXAMPLE_RECURSIVE      = NO
  673
+
  674
+# The IMAGE_PATH tag can be used to specify one or more files or 
  675
+# directories that contain image that are included in the documentation (see 
  676
+# the \image command).
  677
+
  678
+IMAGE_PATH             = 
  679
+
  680
+# The INPUT_FILTER tag can be used to specify a program that doxygen should 
  681
+# invoke to filter for each input file. Doxygen will invoke the filter program 
  682
+# by executing (via popen()) the command <filter> <input-file>, where <filter> 
  683
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an 
  684
+# input file. Doxygen will then use the output that the filter program writes 
  685
+# to standard output.  If FILTER_PATTERNS is specified, this tag will be 
  686
+# ignored.
  687
+
  688
+INPUT_FILTER           = 
  689
+
  690
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern 
  691
+# basis.  Doxygen will compare the file name with each pattern and apply the 
  692
+# filter if there is a match.  The filters are a list of the form: 
  693
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further 
  694
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER 
  695
+# is applied to all files.
  696
+
  697
+FILTER_PATTERNS        = 
  698
+
  699
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using 
  700
+# INPUT_FILTER) will be used to filter the input files when producing source 
  701
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
  702
+
  703
+FILTER_SOURCE_FILES    = NO
  704
+
  705
+#---------------------------------------------------------------------------
  706
+# configuration options related to source browsing
  707
+#---------------------------------------------------------------------------
  708
+
  709
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will 
  710
+# be generated. Documented entities will be cross-referenced with these sources. 
  711
+# Note: To get rid of all source code in the generated output, make sure also 
  712
+# VERBATIM_HEADERS is set to NO.
  713
+
  714
+SOURCE_BROWSER         = NO
  715
+
  716
+# Setting the INLINE_SOURCES tag to YES will include the body 
  717
+# of functions and classes directly in the documentation.
  718
+
  719
+INLINE_SOURCES         = NO
  720
+
  721
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct 
  722
+# doxygen to hide any special comment blocks from generated source code 
  723
+# fragments. Normal C and C++ comments will always remain visible.
  724
+
  725
+STRIP_CODE_COMMENTS    = YES
  726
+
  727
+# If the REFERENCED_BY_RELATION tag is set to YES 
  728
+# then for each documented function all documented 
  729
+# functions referencing it will be listed.
  730
+
  731
+REFERENCED_BY_RELATION = NO
  732
+
  733
+# If the REFERENCES_RELATION tag is set to YES 
  734
+# then for each documented function all documented entities 
  735
+# called/used by that function will be listed.
  736
+
  737
+REFERENCES_RELATION    = NO
  738
+
  739
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default) 
  740
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from 
  741
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will 
  742
+# link to the source code.  Otherwise they will link to the documentation.
  743
+
  744
+REFERENCES_LINK_SOURCE = YES
  745
+
  746
+# If the USE_HTAGS tag is set to YES then the references to source code 
  747
+# will point to the HTML generated by the htags(1) tool instead of doxygen 
  748
+# built-in source browser. The htags tool is part of GNU's global source 
  749
+# tagging system (see http://www.gnu.org/software/global/global.html). You 
  750
+# will need version 4.8.6 or higher.
  751
+
  752
+USE_HTAGS              = NO
  753
+
  754
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen 
  755
+# will generate a verbatim copy of the header file for each class for 
  756
+# which an include is specified. Set to NO to disable this.
  757
+
  758
+VERBATIM_HEADERS       = YES
  759
+
  760
+#---------------------------------------------------------------------------
  761
+# configuration options related to the alphabetical class index
  762
+#---------------------------------------------------------------------------
  763
+
  764
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index 
  765
+# of all compounds will be generated. Enable this if the project 
  766
+# contains a lot of classes, structs, unions or interfaces.
  767
+
  768
+ALPHABETICAL_INDEX     = NO
  769
+
  770
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then 
  771
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns 
  772
+# in which this list will be split (can be a number in the range [1..20])
  773
+
  774
+COLS_IN_ALPHA_INDEX    = 5
  775
+
  776
+# In case all classes in a project start with a common prefix, all 
  777
+# classes will be put under the same header in the alphabetical index. 
  778
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that 
  779
+# should be ignored while generating the index headers.
  780
+
  781
+IGNORE_PREFIX          = 
  782
+
  783
+#---------------------------------------------------------------------------
  784
+# configuration options related to the HTML output
  785
+#---------------------------------------------------------------------------
  786
+
  787
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will 
  788
+# generate HTML output.
  789
+
  790
+GENERATE_HTML          = YES
  791
+
  792
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. 
  793
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be 
  794
+# put in front of it. If left blank `html' will be used as the default path.
  795
+
  796
+HTML_OUTPUT            = html
  797
+
  798
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for 
  799
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank 
  800
+# doxygen will generate files with .html extension.
  801
+
  802
+HTML_FILE_EXTENSION    = .html
  803
+
  804
+# The HTML_HEADER tag can be used to specify a personal HTML header for 
  805
+# each generated HTML page. If it is left blank doxygen will generate a 
  806
+# standard header.
  807
+
  808
+HTML_HEADER            = 
  809
+
  810
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for 
  811
+# each generated HTML page. If it is left blank doxygen will generate a 
  812
+# standard footer.
  813
+
  814
+HTML_FOOTER            = 
  815
+
  816
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading 
  817
+# style sheet that is used by each HTML page. It can be used to 
  818
+# fine-tune the look of the HTML output. If the tag is left blank doxygen 
  819
+# will generate a default style sheet. Note that doxygen will try to copy 
  820
+# the style sheet file to the HTML output directory, so don't put your own 
  821
+# stylesheet in the HTML output directory as well, or it will be erased!
  822
+
  823
+HTML_STYLESHEET        = 
  824
+
  825
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, 
  826
+# files or namespaces will be aligned in HTML using tables. If set to 
  827
+# NO a bullet list will be used.
  828
+
  829
+HTML_ALIGN_MEMBERS     = YES
  830
+
  831
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML 
  832
+# documentation will contain sections that can be hidden and shown after the 
  833
+# page has loaded. For this to work a browser that supports 
  834
+# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox 
  835
+# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
  836
+
  837
+HTML_DYNAMIC_SECTIONS  = NO
  838
+
  839
+# If the GENERATE_DOCSET tag is set to YES, additional index files 
  840
+# will be generated that can be used as input for Apple's Xcode 3 
  841
+# integrated development environment, introduced with OSX 10.5 (Leopard). 
  842
+# To create a documentation set, doxygen will generate a Makefile in the 
  843
+# HTML output directory. Running make will produce the docset in that 
  844
+# directory and running "make install" will install the docset in 
  845
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find 
  846
+# it at startup. 
  847
+# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html for more information.
  848
+
  849
+GENERATE_DOCSET        = NO
  850
+
  851
+# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the 
  852
+# feed. A documentation feed provides an umbrella under which multiple 
  853
+# documentation sets from a single provider (such as a company or product suite) 
  854
+# can be grouped.
  855
+
  856
+DOCSET_FEEDNAME        = "Doxygen generated docs"
  857
+
  858
+# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that 
  859
+# should uniquely identify the documentation set bundle. This should be a 
  860
+# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen 
  861
+# will append .docset to the name.
  862
+
  863
+DOCSET_BUNDLE_ID       = org.doxygen.Project
  864
+
  865
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files 
  866
+# will be generated that can be used as input for tools like the 
  867
+# Microsoft HTML help workshop to generate a compiled HTML help file (.chm) 
  868
+# of the generated HTML documentation.
  869
+
  870
+GENERATE_HTMLHELP      = NO
  871
+
  872
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can 
  873
+# be used to specify the file name of the resulting .chm file. You 
  874
+# can add a path in front of the file if the result should not be 
  875
+# written to the html output directory.
  876
+
  877
+CHM_FILE               = 
  878
+
  879
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can 
  880
+# be used to specify the location (absolute path including file name) of 
  881
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run 
  882
+# the HTML help compiler on the generated index.hhp.
  883
+
  884
+HHC_LOCATION           = 
  885
+
  886
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag 
  887
+# controls if a separate .chi index file is generated (YES) or that 
  888
+# it should be included in the master .chm file (NO).
  889
+
  890
+GENERATE_CHI           = NO
  891
+
  892
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING 
  893
+# is used to encode HtmlHelp index (hhk), content (hhc) and project file 
  894
+# content.
  895
+
  896
+CHM_INDEX_ENCODING     = 
  897
+
  898
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag 
  899
+# controls whether a binary table of contents is generated (YES) or a 
  900
+# normal table of contents (NO) in the .chm file.
  901
+
  902
+BINARY_TOC             = NO
  903
+
  904
+# The TOC_EXPAND flag can be set to YES to add extra items for group members 
  905
+# to the contents of the HTML help documentation and to the tree view.
  906
+
  907
+TOC_EXPAND             = NO
  908
+
  909
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and QHP_VIRTUAL_FOLDER 
  910
+# are set, an additional index file will be generated that can be used as input for 
  911
+# Qt's qhelpgenerator to generate a Qt Compressed Help (.qch) of the generated 
  912
+# HTML documentation.
  913
+
  914
+GENERATE_QHP           = NO
  915
+
  916
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can 
  917
+# be used to specify the file name of the resulting .qch file. 
  918
+# The path specified is relative to the HTML output folder.
  919
+
  920
+QCH_FILE               = 
  921
+
  922
+# The QHP_NAMESPACE tag specifies the namespace to use when generating 
  923
+# Qt Help Project output. For more information please see 
  924
+# http://doc.trolltech.com/qthelpproject.html#namespace
  925
+
  926
+QHP_NAMESPACE          = 
  927
+
  928
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating 
  929
+# Qt Help Project output. For more information please see 
  930
+# http://doc.trolltech.com/qthelpproject.html#virtual-folders
  931
+
  932
+QHP_VIRTUAL_FOLDER     = doc
  933
+
  934
+# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to add. 
  935
+# For more information please see 
  936
+# http://doc.trolltech.com/qthelpproject.html#custom-filters
  937
+
  938
+QHP_CUST_FILTER_NAME   = 
  939
+
  940
+# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the custom filter to add.For more information please see 
  941
+# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">Qt Help Project / Custom Filters</a>.
  942
+
  943
+QHP_CUST_FILTER_ATTRS  = 
  944
+
  945
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this project's 
  946
+# filter section matches. 
  947
+# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">Qt Help Project / Filter Attributes</a>.
  948
+
  949
+QHP_SECT_FILTER_ATTRS  = 
  950
+
  951
+# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can 
  952
+# be used to specify the location of Qt's qhelpgenerator. 
  953
+# If non-empty doxygen will try to run qhelpgenerator on the generated 
  954
+# .qhp file.
  955
+
  956
+QHG_LOCATION           = 
  957
+
  958
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at 
  959
+# top of each HTML page. The value NO (the default) enables the index and 
  960
+# the value YES disables it.
  961
+
  962
+DISABLE_INDEX          = NO
  963
+
  964
+# This tag can be used to set the number of enum values (range [1..20]) 
  965
+# that doxygen will group on one line in the generated HTML documentation.
  966
+
  967
+ENUM_VALUES_PER_LINE   = 4
  968
+
  969
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index 
  970
+# structure should be generated to display hierarchical information. 
  971
+# If the tag value is set to FRAME, a side panel will be generated 
  972
+# containing a tree-like index structure (just like the one that 
  973
+# is generated for HTML Help). For this to work a browser that supports 
  974
+# JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+, 
  975
+# Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are 
  976
+# probably better off using the HTML help feature. Other possible values 
  977
+# for this tag are: HIERARCHIES, which will generate the Groups, Directories, 
  978
+# and Class Hierarchy pages using a tree view instead of an ordered list; 
  979
+# ALL, which combines the behavior of FRAME and HIERARCHIES; and NONE, which 
  980
+# disables this behavior completely. For backwards compatibility with previous 
  981
+# releases of Doxygen, the values YES and NO are equivalent to FRAME and NONE 
  982
+# respectively.
  983
+
  984
+GENERATE_TREEVIEW      = NONE
  985
+
  986
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be 
  987
+# used to set the initial width (in pixels) of the frame in which the tree 
  988
+# is shown.
  989
+
  990
+TREEVIEW_WIDTH         = 250
  991
+
  992
+# Use this tag to change the font size of Latex formulas included 
  993
+# as images in the HTML documentation. The default is 10. Note that 
  994
+# when you change the font size after a successful doxygen run you need 
  995
+# to manually remove any form_*.png images from the HTML output directory 
  996
+# to force them to be regenerated.
  997
+
  998
+FORMULA_FONTSIZE       = 10
  999
+
  1000
+#---------------------------------------------------------------------------
  1001
+# configuration options related to the LaTeX output
  1002
+#---------------------------------------------------------------------------
  1003
+
  1004
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will 
  1005
+# generate Latex output.
  1006
+
  1007
+GENERATE_LATEX         = NO
  1008
+
  1009
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. 
  1010
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be 
  1011
+# put in front of it. If left blank `latex' will be used as the default path.
  1012
+
  1013
+LATEX_OUTPUT           = latex
  1014
+
  1015
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be 
  1016
+# invoked. If left blank `latex' will be used as the default command name.
  1017
+
  1018
+LATEX_CMD_NAME         = latex
  1019
+
  1020
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to 
  1021
+# generate index for LaTeX. If left blank `makeindex' will be used as the 
  1022
+# default command name.
  1023
+
  1024
+MAKEINDEX_CMD_NAME     = makeindex
  1025
+
  1026
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact 
  1027
+# LaTeX documents. This may be useful for small projects and may help to 
  1028
+# save some trees in general.
  1029
+
  1030
+COMPACT_LATEX          = NO
  1031
+
  1032
+# The PAPER_TYPE tag can be used to set the paper type that is used 
  1033
+# by the printer. Possible values are: a4, a4wide, letter, legal and 
  1034
+# executive. If left blank a4wide will be used.
  1035
+
  1036
+PAPER_TYPE             = a4wide
  1037
+
  1038
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX 
  1039
+# packages that should be included in the LaTeX output.
  1040
+
  1041
+EXTRA_PACKAGES         = 
  1042
+
  1043
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for 
  1044
+# the generated latex document. The header should contain everything until 
  1045
+# the first chapter. If it is left blank doxygen will generate a 
  1046
+# standard header. Notice: only use this tag if you know what you are doing!
  1047
+
  1048
+LATEX_HEADER           = 
  1049
+
  1050
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated 
  1051
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will 
  1052
+# contain links (just like the HTML output) instead of page references 
  1053
+# This makes the output suitable for online browsing using a pdf viewer.
  1054
+
  1055
+PDF_HYPERLINKS         = YES
  1056
+
  1057
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of 
  1058
+# plain latex in the generated Makefile. Set this option to YES to get a 
  1059
+# higher quality PDF documentation.
  1060
+
  1061
+USE_PDFLATEX           = YES
  1062
+
  1063
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. 
  1064
+# command to the generated LaTeX files. This will instruct LaTeX to keep 
  1065
+# running if errors occur, instead of asking the user for help. 
  1066
+# This option is also used when generating formulas in HTML.
  1067
+
  1068
+LATEX_BATCHMODE        = NO
  1069
+
  1070
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not 
  1071
+# include the index chapters (such as File Index, Compound Index, etc.) 
  1072
+# in the output.
  1073
+
  1074
+LATEX_HIDE_INDICES     = NO
  1075
+
  1076
+# If LATEX_SOURCE_CODE is set to YES then doxygen will include
  1077
+# source code with syntax highlighting in the LaTeX output.
  1078
+# Note that which sources are shown also depends on other settings
  1079
+# such as SOURCE_BROWSER.
  1080
+
  1081
+LATEX_SOURCE_CODE      = NO
  1082
+
  1083
+#---------------------------------------------------------------------------
  1084
+# configuration options related to the RTF output
  1085
+#---------------------------------------------------------------------------
  1086
+
  1087
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output 
  1088
+# The RTF output is optimized for Word 97 and may not look very pretty with 
  1089
+# other RTF readers or editors.
  1090
+
  1091
+GENERATE_RTF           = NO
  1092
+
  1093
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. 
  1094
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be 
  1095
+# put in front of it. If left blank `rtf' will be used as the default path.
  1096
+
  1097
+RTF_OUTPUT             = rtf
  1098
+
  1099
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact 
  1100
+# RTF documents. This may be useful for small projects and may help to 
  1101
+# save some trees in general.
  1102
+
  1103
+COMPACT_RTF            = NO
  1104
+
  1105
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated 
  1106
+# will contain hyperlink fields. The RTF file will 
  1107
+# contain links (just like the HTML output) instead of page references. 
  1108
+# This makes the output suitable for online browsing using WORD or other 
  1109
+# programs which support those fields. 
  1110
+# Note: wordpad (write) and others do not support links.
  1111
+
  1112
+RTF_HYPERLINKS         = NO
  1113
+
  1114
+# Load stylesheet definitions from file. Syntax is similar to doxygen's 
  1115
+# config file, i.e. a series of assignments. You only have to provide 
  1116
+# replacements, missing definitions are set to their default value.
  1117
+
  1118
+RTF_STYLESHEET_FILE    = 
  1119
+
  1120
+# Set optional variables used in the generation of an rtf document. 
  1121
+# Syntax is similar to doxygen's config file.
  1122
+
  1123
+RTF_EXTENSIONS_FILE    = 
  1124
+
  1125
+#---------------------------------------------------------------------------
  1126
+# configuration options related to the man page output
  1127
+#---------------------------------------------------------------------------
  1128
+
  1129
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will 
  1130
+# generate man pages
  1131
+
  1132
+GENERATE_MAN           = NO
  1133
+
  1134
+# The MAN_OUTPUT tag is used to specify where the man pages will be put. 
  1135
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be 
  1136
+# put in front of it. If left blank `man' will be used as the default path.
  1137
+
  1138
+MAN_OUTPUT             = man
  1139
+
  1140
+# The MAN_EXTENSION tag determines the extension that is added to 
  1141
+# the generated man pages (default is the subroutine's section .3)
  1142
+
  1143
+MAN_EXTENSION          = .3
  1144
+
  1145
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,