Skip to content
Printrboard G2 32 bit controller
Branch: master
Clone or download
drphil3d heated bed beheavior notes
#If you have a heated bed connected to your G2 this code MUST be enabled
#Otherwise the heated bed will turn on by default this is a bug we will soon fix
#Remove the section below ONLY if you have disconnected the heated bed power wires
Latest commit 7a60d54 Jul 30, 2019
Permalink
Type Name Latest commit message Commit time
Failed to load latest commit information.
Power Board V1.2 Docs new cura profile updates Jul 17, 2019
Printrboard G2 V3c Schematics added gerbers, schematics, marlin and klipper configs Feb 13, 2019
Slicer Profiles config fixes, cura profiles and more Jul 30, 2019
Klipper-Printrbelt Config printrbelt config Jun 12, 2019
Powerboard bypss.png
Printrbot Simple Pro G2 Klipper Config NeoPixel - Leveling Heated Bed.txt heated bed beheavior notes Jul 30, 2019
README.md
Simple-Pro-Klipper.jpg config fixes, cura profiles and more Jul 30, 2019
g2 elvis.PNG added gerbers, schematics, marlin and klipper configs Feb 13, 2019
g2-board.png added gerbers, schematics, marlin and klipper configs Feb 13, 2019
klipper-g2-install.md updates Jun 26, 2019
macros.txt Added M600 Filament change Jul 6, 2019
motos schematic.png added gerbers, schematics, marlin and klipper configs Feb 13, 2019
pins.jpg added gerbers, schematics, marlin and klipper configs Feb 13, 2019
probing.jpg added gerbers, schematics, marlin and klipper configs Feb 13, 2019

README.md

Printrboard G2

32bit Controller - Printrbot Simple Pro

Printrboard G2

Klipper

Klipper on Simple Pro

  • Option 1: Download the config file and follow the installation instructions. - Best Option Requires a Raspberry Pi 3 and Octoprint

  • Option 2: Download the Raspberry Pi Octoprint image. The printrboard will need to be flashed 16Gb SD Card Required

SD Card Image

Klipper Installation Guide

Klipper on G2 Github Issue for more information

Steps Per MM vs Step Distance

The pound sign is used to comment out code Step distance is 1 divided by the microstepping value 1/80 equals 0.0125 80 steps per mm at 16x microstepping Max velocity is around 425 mm/s, however to achieve this speed the bearings must first be run at low speed to warm up. Calibration Calculator

Stock Firmware

TinyG

Other Firmware - No longer in devlopment

Marlin 2.0 - Prints but some setpper driver timing issues still need to be resolved

ESP3D Gui for the Printrhub Display

Powershell Script for Uploading Gcode locally PrintrBotSelfHost

Printrbot-g2-console

If you wish to remove or bypass the Printrhub Power-Enable Pins Power

You can’t perform that action at this time.