Skip to content
This repository
Browse code

updated changelog for 1.7.1 and bumped remaining version numbers

  • Loading branch information...
commit 347f7adb71ac80290639a3764b598c94b828f3f4 1 parent 6ea2515
Lars Op den Kamp opdenkamp authored
39 ChangeLog
... ... @@ -1,3 +1,42 @@
  1 +libcec (1.7.2-1) unstable; urgency=low
  2 +
  3 + * changed/added:
  4 + * display a warning message if libCEC was not compiled with adapter
  5 + detection for the target platform
  6 + * panasonic: added a vendor command for panasonic that will enable routing
  7 + of some more buttons on the remote (guide, text, ...)
  8 + * cec-client: don't display debug output by default in 'cec-client -l'
  9 +
  10 + * interface changes:
  11 + * added cec_command::PushArray()
  12 +
  13 + * fixed:
  14 + * missing virtual keyword in CCECCommandHandler::
  15 + GetReplacementDeviceType()
  16 + * replace the handler (if needed) in GetHandler()
  17 + * reply with abort reason 'invalid operand' to vendor commands that we
  18 + don't understand
  19 + * changed all Handle...() commands to return a cec_abort_reason and send
  20 + the correct abort reason to the initiator as a response to directly
  21 + addressed messages
  22 + * changed 'couldn't change the ackmask: the connection is closed' into a
  23 + debug message
  24 + * don't send active source commands when the physical address is invalid or
  25 + unknown
  26 + * set the power status of a device to 'powered on' after it sends a stream
  27 + path change. can save an unneeded power state update request
  28 + * removed dupe code around delayed activate source commands. check for
  29 + delayed active source commands every 5 seconds instead of 15 seconds.
  30 + * panasonic: reset m_bPowerUpEventReceived in CVLCommandHandler when the
  31 + device lets us know it went into standby mode. fixes possibly failed
  32 + active source switches after it succeeded once
  33 + * panasonic: fixed delayed source switch for panasonic
  34 + * cec-client: wrong client version
  35 + * Makefile cleanups. don't link cec-client and cec-config against libudev
  36 + and liblockdev
  37 +
  38 + -- Pulse-Eight Packaging <packaging@pulse-eight.com> Thu, 21 Jun 2012 16:01:00 +0100
  39 +
1 40 libcec (1.7.1-1) unstable; urgency=low
2 41
3 42 * changed/added:
39 debian/changelog
... ... @@ -1,3 +1,42 @@
  1 +libcec (1.7.2-1) unstable; urgency=low
  2 +
  3 + * changed/added:
  4 + * display a warning message if libCEC was not compiled with adapter
  5 + detection for the target platform
  6 + * panasonic: added a vendor command for panasonic that will enable routing
  7 + of some more buttons on the remote (guide, text, ...)
  8 + * cec-client: don't display debug output by default in 'cec-client -l'
  9 +
  10 + * interface changes:
  11 + * added cec_command::PushArray()
  12 +
  13 + * fixed:
  14 + * missing virtual keyword in CCECCommandHandler::
  15 + GetReplacementDeviceType()
  16 + * replace the handler (if needed) in GetHandler()
  17 + * reply with abort reason 'invalid operand' to vendor commands that we
  18 + don't understand
  19 + * changed all Handle...() commands to return a cec_abort_reason and send
  20 + the correct abort reason to the initiator as a response to directly
  21 + addressed messages
  22 + * changed 'couldn't change the ackmask: the connection is closed' into a
  23 + debug message
  24 + * don't send active source commands when the physical address is invalid or
  25 + unknown
  26 + * set the power status of a device to 'powered on' after it sends a stream
  27 + path change. can save an unneeded power state update request
  28 + * removed dupe code around delayed activate source commands. check for
  29 + delayed active source commands every 5 seconds instead of 15 seconds.
  30 + * panasonic: reset m_bPowerUpEventReceived in CVLCommandHandler when the
  31 + device lets us know it went into standby mode. fixes possibly failed
  32 + active source switches after it succeeded once
  33 + * panasonic: fixed delayed source switch for panasonic
  34 + * cec-client: wrong client version
  35 + * Makefile cleanups. don't link cec-client and cec-config against libudev
  36 + and liblockdev
  37 +
  38 + -- Pulse-Eight Packaging <packaging@pulse-eight.com> Thu, 21 Jun 2012 16:01:00 +0100
  39 +
1 40 libcec (1.7.1-1) unstable; urgency=low
2 41
3 42 * changed/added:
BIN  project/cec-config.rc
Binary file not shown
BIN  project/libcec.rc
Binary file not shown
BIN  project/testclient.rc
Binary file not shown
4 src/CecSharpTester/Properties/AssemblyInfo.cs
@@ -32,5 +32,5 @@
32 32 // You can specify all the values or you can default the Build and Revision Numbers
33 33 // by using the '*' as shown below:
34 34 // [assembly: AssemblyVersion("1.0.*")]
35   -[assembly: AssemblyVersion("1.7.0.0")]
36   -[assembly: AssemblyFileVersion("1.7.0.0")]
  35 +[assembly: AssemblyVersion("1.7.1.0")]
  36 +[assembly: AssemblyFileVersion("1.7.1.0")]
2  src/LibCecSharp/AssemblyInfo.cpp
@@ -13,7 +13,7 @@ using namespace System::Security::Permissions;
13 13 [assembly:AssemblyTrademarkAttribute("")];
14 14 [assembly:AssemblyCultureAttribute("")];
15 15
16   -[assembly:AssemblyVersionAttribute("1.7.0.0")];
  16 +[assembly:AssemblyVersionAttribute("1.7.1.0")];
17 17
18 18 [assembly:ComVisible(false)];
19 19 [assembly:CLSCompliantAttribute(true)];
4 src/cec-config-gui/Properties/AssemblyInfo.cs
@@ -32,5 +32,5 @@
32 32 // You can specify all the values or you can default the Build and Revision Numbers
33 33 // by using the '*' as shown below:
34 34 // [assembly: AssemblyVersion("1.0.*")]
35   -[assembly: AssemblyVersion("1.7.0.0")]
36   -[assembly: AssemblyFileVersion("1.7.0.0")]
  35 +[assembly: AssemblyVersion("1.7.1.0")]
  36 +[assembly: AssemblyFileVersion("1.7.1.0")]

0 comments on commit 347f7ad

Please sign in to comment.
Something went wrong with that request. Please try again.