{{ message }}

# Qqwy / elixir-tensor

The Tensor library adds support for Vectors, Matrixes and higher-dimension Tensors to Elixir.

## Files

Failed to load latest commit information.
Type
Name
Commit time

# Tensor

The Tensor library adds support for Vectors, Matrixes and higher-dimension Tensors to Elixir. These data structures allow easier creation and manipulation of multi-dimensional collections of things. One could use them for math, but also to build e.g. board game representations.

The Tensor library builds them in a sparse way.

## Vector

A Vector is a one-dimensional collection of elements. It can be viewed as a list with a known length.

```iex> use Tensor
iex> vec = Vector.new([1,2,3,4,5])
#Vector-(5)[1, 2, 3, 4, 5]
iex> vec2 = Vector.new(~w{foo bar baz qux})
#Vector-(4)["foo", "bar", "baz", "qux"]
iex> vec2
"baz"
#Vector-(5)[4, 5, 6, 7, 8]
#Vector-(5)[2, 4, 6, 8, 10]```

It is nicer than a list because:

• retrieving the length happens in O(1)
• reading/writing elements to the list happens in O(log n), as maps are used internally.
• concatenation, etc. is also < O(n), for the same reason.

Vectors are very cool, so the following things have been defined to make working with them a bliss:

• creating vectors from lists
• appending values to vectors
• reverse a vector

When working with numerical vectors, you might also like to:

• addition of a number to all elements in a vector.
• elementwise addition of two vectors of the same size.
• calculate the dot product of two numerical vectors

## Matrix

A Matrix is a two-dimensional collection of elements, with known width and height.

These are highly useful for certain mathematical calculations, but also for e.g. board games.

Matrices are super useful, so there are many helper methods defined to work with them.

```iex> use Tensor
iex> mat = Matrix.new([[1,2,3],[4,5,6],[7,8,9]],3,3)
#Matrix-(3×3)
┌                          ┐
│       1,       2,       3│
│       4,       5,       6│
│       7,       8,       9│
└                          ┘
iex> Matrix.rotate_clockwise(mat)
#Matrix-(3×3)
┌                          ┐
│       7,       4,       1│
│       8,       5,       2│
│       9,       6,       3│
└                          ┘
iex> mat
#Vector-(3)[1, 2, 3]
iex> mat
9
iex> Matrix.diag([1,2,3])
#Matrix-(3×3)
┌                          ┐
│       1,       0,       0│
│       0,       2,       0│
│       0,       0,       3│
└                          ┘

#Matrix-(3×3)
┌                          ┐
│       3,       4,       5│
│       6,       7,       8│
│       9,      10,      11│
└                          ┘
#Matrix-(3×3)
┌                          ┐
│       2,       4,       6│
│       8,      10,      12│
│      14,      16,      18│
└                          ┘
```

The Matrix module lets you:

• creating matrices from lists
• creating an identity matrix
• creating a diagonal matrix from a list.
• Transpose matrices.
• Rotate and flip matrices.
• Check if a matrix is `square?`, `diagonal?`, or `symmetric?`.
• creating row- or column matrices from vectors.
• extract specific rows or columns from a matrix.
• extract values from the main diagonal.

As well as some common math operations

• Add a number to all values inside a matrix
• Multiply all values inside a matrix with a number
• Matrix Multiplication, with two matrices.
• the `trace` operation for square matrices.

## Higher-Dimension Tensor

Tensors are implemented using maps internally. This means that read and write access to elements in them is O(log n).

```iex> use Tensor
iex> tensor = Tensor.new([[[1,2],[3,4],[5,6]],[[7,8],[9,10],[11,12]]], [3,3,2])
#Tensor(3×3×2)
1,       2
3,       4
5,       6
7,       8
9,      10
11,      12
0,       0
0,       0
0,       0
iex> tensor
#Matrix-(3×2)
┌                 ┐
│       7,       8│
│       9,      10│
│      11,      12│
└                 ┘```

Vector and Matrices are also Tensors. There exist some functions that only make sense when used on these one- or two-dimensional structures. Therefore, the extra Vector and Matrix modules exist.

## Sparcity

The Vectors/Matrices/Tensors are stored in a sparse way. Only the values that differ from the identity (defaults to `nil`) are actually stored in the Vector/Matrix/Tensor.

This allows for smaller data sizes, as well as faster operations when peforming on, for instance, diagonal matrices.

## Numbers

Tensor uses the Numbers library for the implementations of elementwise addition/subtraction/multiplication etc. This means that you can fill a Tensor with e.g. `Decimal`s or `Ratio`nals, and it will Just Work!

It even is the case that Tensor itself implements the Numeric behaviour, which means that you can nest Vectors/Matrices/Tensors in your Vectors/Matrices/Tensors, and doing math with them will still work!! (as long as the elements inside the innermost Vector/Matrix/Tensor follow the Numeric behaviour as well, of course.)

## Syntactic Sugar

For Tensors, many sugary protocols and behaviours have been implemented to let them play nicely with other parts of your applications:

### Access Behaviour

Tensors have implementations of the Access Behaviour, which let you do:

```iex> use Tensor
iex> mat = Matrix.new([[1,2],[3,4]], 2,2)
iex> mat
#Vector-(2)[1, 2]
iex> mat
4
iex> put_in mat, 100
#Matrix-(2×2)
┌                 ┐
│       1,       2│
│     100,       4│
└                 ┘```

It is even possible to use negative indices to look from the end of the Vector/Matrix/Tensor!

### Enumerable Protocol

Tensors allow you to enumerate over the values inside, using the Enumerable protocol. Note that:

• enumerating over a Vector will iterate over the values inside,
• enumerating over a Matrix will iterate over the Vectors that make up the rows of the matrix
• enumerating over an order-3 Tensor will iterate over the Matrices that make up the 2-dimensional slices of this Tensor,
• etc...

As there are many other ways to iterate over values inside tensors, functions like `Tensor.to_list` , `Matrix.columns` also exist.

There are also functions like `Tensor.map`, which returns a new Tensor containg the results of this mapping operation. `Tensor.map` is nice in the way that it will only iterate over the actual values that have a value other than the default, which makes it fast.

If you can think of other nice ways to enumerate over Tensors, please let me know, as these would make great additions to the library!

### Collectable Protocol

If you want to build up a Vector from a collection of values, or a Matrix from a collection of Vectors, (or an order-3 tensor from a collection of Matrices, etc), you can do so by harnessing the power of the Collectable protocol.

```iex> use Tensor
iex> mat = Matrix.new(0,3)
iex> v = Vector.new([1,2,3])
iex> Enum.into([v,v,v], mat)
#Matrix-(3×3)
┌                          ┐
│       1,       2,       3│
│       1,       2,       3│
│       1,       2,       3│
└                          ┘```

### Inspect Protocol

The Inspect protocol has been overridden for all Tensors.

• Vectors are shown as a list with the length given.
• Matrices are shown in a two-dimensional grid, with the dimensions given.
• Three-dimensional tensors are shown with indentation and colour changes, to show the relationship of the values inside.
• Four-dimensional Tensors and higher print their lower-dimension values from top-to-bottom.

### FunLand.Reducable Semiprotocol

This is a lightweight version of the Enumerable protocol, with a simple implementation.

``````    iex> use Tensor
iex> x = Vector.new([1,2,3,4])
iex> FunLand.Reducable.reduce(x, 0, fn x, acc -> acc + x end)
10
``````

### Extractable Protocol

This allows you to extract a single element per time from the Vector/Tensor/Matrix. Because it is fastest to extract the elements with the highest index, these are returned first.

```    iex> use Tensor
iex> x = Matrix.new([[1,2],[3,4]], 2, 2)
iex> {:ok, {item, x}} = Extractable.extract(x)
iex> item
#Vector<(2)[3, 4]>
iex> {:ok, {item, x}} = Extractable.extract(x)
iex> item
#Vector<(2)[1, 2]>
iex> Extractable.extract(x)
{:error, :empty}```

### Insertable Protocol

This allows you ti insert a single element per time into the Vector/Tensor/Matrix. Insertion always happens at the highest index location. (The size of the highest dimension of the Tensor is increased by one)

```    iex> use Tensor
iex> x = Matrix.new(0, 2)
iex> {:ok, x} = Insertable.insert(x, Vector.new([1, 2]))
iex> {:ok, x} = Insertable.insert(x, Vector.new([3, 4]))
#Matrix<(2×2)
┌                 ┐
│       1,       2│
│       3,       4│
└                 ┘
>```

### Efficiency

The Tensor package is completely built in Elixir. It is not a wrapper for any functionality written in other languages.

This does mean that if you want to do heavy number crunching, you might want to look for something else.

However, as Tensor uses as sparse tensor implementation, many calculations can be much faster than you might expect from a terse tensor implementation, depending on your input data.

## Installation

The package can be installed by adding `tensor` to your list of dependencies in `mix.exs`:

```def deps do
[
{:tensor, "~> 2.0"}
]
end```

## Changelog

• 2.0.2 - Bugfix w.r.t. optional dependency `FunLand`.

• 2.0.1 - Make `FunLand` an optional dependency.

• 2.0.0 - Many changes, including Backwards incompatible ones:

• Increase version number of `Numbers`. Backwards-incompatible change, as `mult` is now used instead of `mul` for multiplication.
• Moving `Tensor`, `Vector` and `Matrix` all under the `Tensor` namespace (so they now are `Tensor.Tensor`, `Tensor.Vector`, `Tensor.Matrix`), to follow the HexPM rules of library management (which is, only use one single top-level module name). Write `use Tensor` to alias the modules in your code.
• Also introduces `FunLand.Mappable`, `FunLand.Reducable`, `Extractable` and `Insertable` protocol implementations.
• 1.2.0 - `Tensor.to_sparse_map`, `Tensor.from_sparse_map`. Also, hidden some functions that were supposed to be private but were not yet.

• 1.1.0 - Add `Matrix.width` and `Matrix.height` functions.

• 1.0.1 - Made documentation of `Matrix.new` more clear. Thank you, @wsmoak !

• 1.0.0 - First stable version.

• 0.8 - Most functionality has been implemented.

• Operation to swap any two arbitrary dimensions of a Tensor, a generalized version of `Matrix.transpose`
• Improve Tensor inspect output.
• Move more functionality to Tensor.
• Add Dyalizer specs to all important methods.
• Add aliases to common methods of Tensor to:
• Vector
• Matrix
• Ensure that when the identity value is stored, it is not actually stored in a Tensor, so Tensor is kept sparse.
• `Tensor.new`
• `Tensor.map`
• `Tensor.sparse_map_with_coordinates`
• `Tensor.dense_map_with_coordinates`
• `Tensor.merge`
• `Tensor.merge_with_coordinates`
• Possibility to use any kind of numbers, including custom data types, for `Tensor.add`, `Tensor.sub`, `Tensor.mul`, `Tensor.div` and `Tensor.pow`.
• Write (doc)tests for all public functions.
• Improve documentation.

The Tensor library adds support for Vectors, Matrixes and higher-dimension Tensors to Elixir.

## Releases

No releases published

## Packages 0

No packages published

## Languages

You can’t perform that action at this time.