Fetching latest commit…
Cannot retrieve the latest commit at this time.
To build packages for Solaris 10: Requirements: ------------- - Development environment including gcc (eg as shipped with Solaris 10) - The Package tools from Solaris 10 or Solaris Nevada/Express. - i.manifest and r.manifest scripts as supplied with Solaris Express in /usr/sadm/install/scripts/ or from OpenSolaris.org: http://cvs.opensolaris.org/source/xref/usr/src/pkgdefs/common_files/i.manifest http://cvs.opensolaris.org/source/xref/usr/src/pkgdefs/common_files/r.manifest i.manifest must be at least version 1.5. Place these scripts in this directory if you are using Solaris 10 GA (which does not ship with these scripts), or in the solaris/ directory in the Quagga source. Package creation instructions: ------------------------------ 1. Configure and build Quagga in the top level build directory as per normal, eg: ./configure --prefix=/usr/local/quagga \ --localstatedir=/var/run/quagga --enable-gcc-rdynamic --enable-opaque-lsa --enable-ospf-te \ --enable-multipath=64 --enable-user=quagga \ --enable-ospfclient=yes --enable-ospfapi=yes \ --enable-group=quagga --enable-nssa --enable-opaque-lsa You will need /usr/sfw/bin and /usr/ccs/bin in your path. 2. make install in the top-level build directory, it's a good idea to make use of DESTDIR to install to an alternate root, eg: gmake DESTDIR=/var/tmp/qroot install 3. In this directory (solaris/), run make packages, specifying DESTDIR if appropriate, eg: gmake DESTDIR=/var/tmp/qroot packages This should result in 4 packages being created: quagga-libs-...-$ARCH.pkg - QUAGGAlibs quagga-daemons-...-$ARCH.pkg - QUAGGAdaemons quagga-doc-...-$ARCH.pkg - QUAGGAdoc quagga-dev-...-$ARCH.pkg - QUAGGAdev quagga-smf-...-$ARCH.pkg - QUAGGAsmf QUAGGAlibs and QUAGGAdaemons are needed for daemon runtime. QUAGGAsmf provides the required bits for Solaris 10+ SMF support. Install and post-install configuration notes: --------------------------------------------- - If you specified a user/group which does not exist per default on Solaris (eg quagga/quagga) you *must* create these before installing these on a system. The packages do *not* create the users. - The configuration files are not created. You must create the configuration file yourself, either with your complete desired configuration, or else if you wish to use the telnet interface for further configuration you must create them containing at least: password whatever The user which quagga runs as must have write permissions on this file, no other user should have read permissions, and you would also have to enable the telnet interface (see below). - SMF notes: - QUAGGAsmf installs a svc:/network/routing/quagga service, with an instance for each daemon - The state of all instances of quagga service can be inspected with: svcs -l svc:/network/routing/quagga or typically just with a shortcut of 'quagga': svcs -l quagga - A specific instance of the quagga service can be inspected by specifying the daemon name as the instance, ie quagga:<daemon>: svcs -l svc:/network/routing/quagga:zebra svcs -l svc:/network/routing/quagga:ospfd <etc> or typically just with the shortcut of 'quagga:<daemon>' or even <daemon>: svcs -l quagga:zebra svcs -l ospfd Eg: # # svcs -l ripd fmri svc:/network/routing/quagga:ripd name Quagga: ripd, RIPv1/2 IPv4 routing protocol daemon. enabled true state online next_state none state_time Wed Jun 15 16:21:02 2005 logfile /var/svc/log/network-routing-quagga:ripd.log restarter svc:/system/svc/restarter:default contract_id 93 dependency require_all/restart svc:/network/routing/quagga:zebra (online) dependency require_all/restart file://localhost//usr/local/quagga/etc/ripd.conf (online) dependency require_all/none svc:/system/filesystem/usr:default (online) dependency require_all/none svc:/network/loopback (online) - Configuration of startup options is by way of SMF properties in a property group named 'quagga'. The defaults should automatically be inline with how you configured Quagga in Step 1 above. - By default the VTY interface is disabled. To change this, see below for how to set the 'quagga/vty_port' property as appropriate for /each/ service. Also, the VTY is set to listen only to localhost by default, you may change the 'quagga/vty_addr' property as appropriate for both of the 'quagga' service and specific individual instances of the 'quagga' service (ie quagga:zebra, quagga:ospfd, etc..). - Properties belonging to the 'quagga' service are inherited by all instances. Eg: # svcprop -p quagga svc:/network/routing/quagga quagga/group astring root quagga/retain boolean false quagga/user astring root quagga/vty_addr astring 127.1 quagga/vty_port integer 0 # svcprop -p quagga svc:/network/routing/quagga:ospfd quagga/retain_routes boolean false quagga/group astring root quagga/retain boolean false quagga/user astring root quagga/vty_addr astring 127.1 quagga/vty_port integer 0 All instances will inherit these properties, unless the instance itself overrides these defaults. This also implies one can modify properties of the 'quagga' service and have them apply to all daemons. # svccfg -s svc:/network/routing/quagga \ setprop quagga/vty_addr = astring: ::1 # svcprop -p quagga svc:/network/routing/quagga quagga/group astring root quagga/retain boolean false quagga/user astring root quagga/vty_port integer 0 quagga/vty_addr astring ::1 # # You *must* refresh instances to have the property change # # take affect for the 'running snapshot' of service state. # svcadm refresh quagga:ospfd # svcprop -p quagga svc:/network/routing/quagga:ospfd quagga/retain_routes boolean false quagga/group astring root quagga/retain boolean false quagga/user astring root quagga/vty_port integer 0 quagga/vty_addr astring ::1 Other daemon-specific options/properties may be available, however they are not yet honoured/used (eg ospfd/apiserver on svc:/network/ospf). - As SMF is dependency aware, restarting network/zebra will restart all the other daemons. - To upgrade from one set of Quagga packages to a newer release, one must first pkgrm the installed packages. When one pkgrm's QUAGGAsmf all property configuration will be lost, and any customisations will have to redone after installing the updated QUAGGAsmf package. - These packages are not supported by Sun Microsystems, report bugs via the usual Quagga channels, ie Bugzilla. Improvements/contributions of course would be greatly appreciated.