Flylink HD & Flylink AV change a new SSID and Password

RAKwireless edited this page Aug 1, 2017 · 1 revision

This document is only using for Flylink HD and Flylink AV .

  • Flylink HD : RAK566(TX) and RA554(RX). Flylink AV : RAK553(TX) and RAK554(RX).
  • RAK5610 is same with RAK554 including firmware and Hardware.

1 RAK554 PIN Definition

RAK554 PIN Definition

2 RAK554 Dip switch definition

RAK554 Dip switch definition
There are 6 group Dial-up in the module . ON direction is showing low-level ,marked as 0. When The Dial-up is on the opposite direcetion ,that is showing high-level,marked as 1 . The dial-up flag order is 1-6,marked as sw1-6. The function definition is followed :

Sw6 Sw5 Band Channel Band
1 1 4 149 5745
1 0 1 48 5240
0 1 1 36 5180
0 0 4 165 5825

The default band is Band4. That is to say channel 149. Sw1 is using for WPS function . If you want to use this function , you need do the following steps.

  • Step1 : Whatever the SW1 level , set SW1 into low-level more than 1 second .
  • Step2 : Then Set SW1 into high-level .
  • Step3 : The Wifi light will blink.that is showing you have step into the WPS mode.

After power on the module,please scan the AP: FS_5G_AP_xxxxxx or Flylink_xxxxxx(please make sure your smartphone supporting 5G SSID). X means MAC address.

3 How to change SSID and PSK

RAK553 will work as OPEN network .if you have to change the SSID and PSK .please following the steps strictly. Note: Once you change the network parameters, you have to make a new connection with Transmitter. Please reference the Flylink-HD-&-Flylink-AV-make-TX-and-RX-connection.

  • Step 1 : Power on RAK553.
  • Step 2: Waiting for the Blue LED turn on and that means the restart completed .
  • Step 3: Scan and connect the AP with your 5G WIFI device ,such as phone,pad ,or PC .
  • Step 4: Open broswer and input the following HTTP command in the address bar and Enter . you need to input the user and password which both are admin. If you get the “value”:”0”, that means the configuration succeed.

HTTP Command: Encryption :

  • 192.168.100.1/param.cgi?action=update&group=wifi&ap_ssid=RAK_5G_AP_XXXXX%20%23=BRING&ap_auth_mode=WPA2PSK&ap_encrypt_type=AES&ap_auth_key=RAK12345

Function:

  • Change the network to WAP2 encryption and a new SSID .

Key point:

  • IP address : 192.168.100.1. Must be 192.168.100.1!
  • SSID : RAK_5G_AP_XXXXX. Change to what you want ,such as SMD_5G_AP_CC566A. we can only support the following chars. but we suggest you’d sue the letters and numbers . ++./abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ_-+=&1234567890@[]?%#++
  • PSK :
    RAK12345. Change to what you want ,such as 1234567890 . the length must be in the range from 8 char to 32 char. we can only support the following chars. ++./abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ_-+=&1234567890@[]?%#++
  • Note: please don’t change any other words !

HTTP Command:Open :

  • 192.168.100.1/param.cgi?action=update&group=wifi&ap_ssid=RAK_5G_AP_XXXXX%20%23=BRING&ap_auth_mode=OPEN&ap_encrypt_type=NONE

Function:

  • Change the network to OPEN mode and a new SSID .

Key point:

  • IP address : 192.168.100.1. Must be 192.168.100.1!
  • SSID : RAK_5G_AP_XXXXX.
    • Change to what you want ,such as SMD_5G_AP_CC566A. we can only support the following chars.but we suggest you’d sue the letters and numbers . ++./abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ_-+=&1234567890@[]?%#++
  • Note: please don’t change any other words !

4 Example

Change the network to OPEN mode and a new SSID: SMD_5G_AP_CC566A .

  • Command: ++192.168.100.1/param.cgi?action=update&group=wifi&ap_ssid=SMD_5G_AP_CC566A%20%23=BRING&ap_auth_mode=OPEN&ap_encrypt_type=NONE++

  • Input the command in Broswer and input the user and password with admin. Input the command

  • HTTP Successful Return:
    HTTP Successful Return

You can’t perform that action at this time.
You signed in with another tab or window. Reload to refresh your session. You signed out in another tab or window. Reload to refresh your session.
Press h to open a hovercard with more details.