boards: nucleo-f303ze: Cleanup documentation

Signed-off-by: Francois Berder <18538310+francois-berder@users.noreply.github.com>
RIOT-OS · Feb 13, 2020 · 6fb2275 · 6fb2275
1 parent a8cec40
commit 6fb2275
Showing 1 changed file with 22 additions and 21 deletions.
diff --git a/boards/nucleo-f303ze/doc.txt b/boards/nucleo-f303ze/doc.txt
@@ -5,43 +5,44 @@
 
 ## Overview
 
-The Nucleo-F303 is a board from ST's Nucleo family supporting a ARM Cortex-M4
-STM32F303RE
+The Nucleo-F303ZE is a board from ST's Nucleo family supporting a ARM Cortex-M4
+STM32F303ZE
 microcontroller with 64Kb of RAM and 512Kb of ROM.
 
 ## Hardware
 
-![nucleo image](http://media.digikey.com/Photos/STMicro%20Photos/MFG_NUCLEO.jpg)
-![nucleo-f303 pinout](https://raw.githubusercontent.com/wiki/RIOT-OS/RIOT/images/nucleo-f303_pinout.png)
+![Nucleo144 F303ZE](https://raw.githubusercontent.com/wiki/RIOT-OS/RIOT/images/nucleo144-board.png)
 
 
 ### MCU
-| MCU        | STM32F303RE           |
-|:------------- |:--------------------- |
-| Family | ARM Cortex-M4     |
-| Vendor | ST Microelectronics   |
-| RAM        | 64Kb                  |
-| Flash      | 512Kb         |
-| Frequency  | up to 72MHz) |
+| MCU        | STM32F303ZE       |
+|:---------- |:----------------- |
+| Family     | ARM Cortex-M4     |
+| Vendor     | ST Microelectronics |
+| RAM        | 64Kb              |
+| Flash      | 512Kb             |
+| Frequency  | up to 72MHz       |
 | FPU        | yes               |
-| Timers | 14 (13x 16-bit, 1x 32-bit [TIM2]) |
-| ADCs       | 4x 12-bit         |
+| Timers     | 14 (10x 16-bit, 1x 32-bit [TIM2], 1x Systick, 2x watchdog) |
+| ADCs       | 4x 12-bit (40 channels) |
 | UARTs      | 5                 |
 | SPIs       | 4                 |
 | I2Cs       | 3                 |
 | RTC        | 1                 |
-| Vcc        | 2.0V - 3.6V           |
-| Datasheet  | [Datasheet](http://www.st.com/st-web-ui/static/active/en/resource/technical/document/datasheet/DM00118585.pdf) |
+| CAN        | 1                 |
+| USB        | 1                 |
+| Vcc        | 2.0V - 3.6V       |
+| Datasheet  | [Datasheet](https://www.st.com/resource/en/datasheet/stm32f303ze.pdf) |
 | Reference Manual | [Reference Manual](http://www.st.com/web/en/resource/technical/document/reference_manual/DM00043574.pdf) |
 | Programming Manual | [Programming Manual](http://www.st.com/web/en/resource/technical/document/programming_manual/DM00046982.pdf) |
-| Board Manual   | [Board Manual](http://www.st.com/st-web-ui/static/active/en/resource/technical/document/user_manual/DM00105823.pdf)|
+| Board Manual | [Board Manual](https://www.st.com/resource/en/user_manual/dm00244518.pdf) |
 
 
 
 ## Implementation Status
 | Device | ID        | Supported | Comments  |
 |:------------- |:------------- |:------------- |:------------- |
-| MCU        | STM32F303RE   | partly    | Energy saving modes not fully utilized |
+| MCU        | STM32F303ZE   | partly    | Energy saving modes not fully utilized |
 | Low-level driver | GPIO    | yes       | |
 |        | PWM       | one PWM   | |
 |        | UART      | three UART    | |
@@ -52,22 +53,22 @@ microcontroller with 64Kb of RAM and 512Kb of ROM.
 
 
 ## Flashing the device
-The ST Nucleo-F303RE board includes an on-board ST-LINK V2 programmer.
+The ST Nucleo-F303ZE board includes an on-board ST-LINK V2 programmer.
 The easiest way to program the board is to use OpenOCD. Once you have
 installed OpenOCD (look [here](https://github.com/RIOT-OS/RIOT/wiki/OpenOCD)
 for installation instructions), you can flash the board simply by typing.
 
 ```
-make flash
+BOARD=nucleo-f303ze make flash
 ```
 and debug via GDB by simply typing
 ```
-make debug
+BOARD=nucleo-f303ze make debug
 ```
 
 
 ## Supported Toolchains
-For using the ST Nucleo-F303RE board we strongly recommend the usage of the
+For using the ST Nucleo-F303ZE board we strongly recommend the usage of the
 [GNU Tools for ARM Embedded Processors](https://launchpad.net/gcc-arm-embedded)
 toolchain.
  */