Skip to content
Permalink
Browse files

webui: tweaked popup help for OpenVPN client's Inbound Firewall setting

  • Loading branch information...
RMerl committed May 21, 2019
1 parent 5bc58b5 commit ccac8d13d1270ca328225b990e674248577fc9dc
Showing with 1 addition and 1 deletion.
  1. +1 −1 release/src/router/www/help_content.js
@@ -417,6 +417,6 @@ helpcontent[50] = new Array("",
"By default, DNS queries generated by the router itself are handled/cached by dnsmasq. Disabling this will send these queries directly to your WAN DNS servers (like stock firmware does). This means scripts running on the router will not be able to resolve local hostnames, but might work better with some setups. This does not affect your clients, ONLY queries done by the router itself.",
"You can finetune traffic allocation by specifying the packet overhead of your WAN connection. You can use a pre-configured preset, or manually enter a value, and enable ATM if you know your WAN connection uses it (many DSL-based services do). If unsure, just leave these values to their default setting.",
"Intercept NTP connections from LAN clients and redirect them to the router's own NTP server. Note that IPv6 is not supported.",
"Allow or block any traffic sent to you network through the VPN tunnel. Should be set to Block unless running a site2site tunnel, or explicitely expecting inbound connections coming through the tunnel.");
"Allow or block any traffic sent to your network through the VPN tunnel. Should be set to Block unless running a site-to-site tunnel, or explicitely expecting inbound connections coming through the tunnel.");
// Last: 50,30

0 comments on commit ccac8d1

Please sign in to comment.
You can’t perform that action at this time.