Permalink
Fetching contributors…
Cannot retrieve contributors at this time
259 lines (172 sloc) 12.2 KB
layout lang ref read_time share author_profile permalink sidebar
archive
en
rx-24f
true
true
false
/docs/en/dxl/rx/rx-24f/
title nav
RX-24F
rx-24f

RX-24F

WARNING : RX-24F has been discontinued. {: .notice--warning}

Specifications

Item Specifications
Baud Rate 7343 bps ~ 1 Mbps
Resolution 0.29°
Running Degree 0° ~ 300°
Endless Turn
Weight 67g
Dimensions (W x H x D) 35.6mm x 50.6mm x 35.5mm
Gear Ratio 193 : 1
Stall Torque 2.6 N*m (at 12V, 2.4A)
No Load Speed 126rpm (at 12V)
Operating Temperature -5°C ~ +80°C
Input Voltage 9 ~ 12V (Recommended : 11.1V)
Standby Current 50mA
Command Signal Digital Packet
Protocol Type Half Duplex Asynchronous Serial Communication
(8bit, 1stop, No Parity)
Physical Connection RS485 Multi Drop Bus(Daisy Chain Type Connector)
ID 0 ~ 253
Feedback Position, Temperature, Load, Input Voltage, etc
Material Full Metal Gear, Engineering Plastic Body

{% include en/dxl/warning.md %}

{% include en/dxl/control_table_protocol1.md %}

Control Table of EEPROM Area

Address Size
(Byte)
Data Name Description Access Initial
Value
0 2 Model Number Model Number R 24
2 1 Firmware Version Firmware Version R -
3 1 ID DYNAMIXEL ID RW 1
4 1 Baud Rate Communication Speed RW 34
5 1 Return Delay Time Response Delay Time RW 250
6 2 CW Angle Limit Clockwise Angle Limit RW 0
8 2 CCW Angle Limit Counter-Clockwise Angle Limit RW 1023
11 1 Temperature Limit Maximum Internal Temperature Limit RW 80
12 1 Min Voltage Limit Minimum Input Voltage Limit RW 60
13 1 Max Voltage Limit Maximum Input Voltage Limit RW 190
14 2 Max Torque Maximun Torque RW 1023
16 1 Status Return Level Select Types of Status Return RW 2
17 1 Alarm LED LED for Alarm RW 36
18 1 Shutdown Shutdown Error Information RW 36

Control Table of RAM Area

Address Size
(Byte)
Data Name Description Access Initial
Value
24 1 Torque Enable Motor Torque On/Off RW 0
25 1 LED Status LED On/Off RW 0
26 1 CW Compliance Margin CW Compliance Margin RW 1
27 1 CCW Compliance Margin CCW Compliance Margin RW 1
28 1 CW Compliance Slope CW Compliance Slope RW 32
29 1 CCW Compliance Slope CCW Compliance Slope RW 32
30 2 Goal Position Target Position RW -
32 2 Moving Speed Moving Speed RW -
34 2 Torque Limit Torque Limit(Goal Torque) RW ADD 14&15
36 2 Present Position Present Position R -
38 2 Present Speed Present Speed R -
40 2 Present Load Present Load R -
42 1 Present Voltage Present Voltage R -
43 1 Present Temperature Present Temperature R -
44 1 Registered If Instruction is registered R 0
46 1 Moving Movement Status R 0
47 1 Lock Locking EEPROM RW 0
48 2 Punch Minimum Current Threshold RW 32

Control Table Description

Model Number (0)

This address stores model number of the DYNAMIXEL.

Firmware Version (2)

This address stores firmware version of the DYNAMIXEL.

ID (3)

{% include en/dxl/control_table_id.md %}

Baud Rate (4)

{% include en/dxl/control_table_baudrate.md %}

Return Delay Time (5)

{% include en/dxl/control_table_return_delay_time.md %}

CW/CCW Angle Limit(6, 8)

{% include en/dxl/control_table_angle_limit.md %}

Temperature Limit (11)

{% include en/dxl/control_table_temp_limit.md %}

Min/Max Voltage Limit (12, 13)

{% include en/dxl/control_table_volt_limit_rx.md %}

Max Torque (14)

{% include en/dxl/control_table_max_torque.md %}

Status Return Level (16)

{% include en/dxl/control_table_status_return_lv.md %}

Alarm LED(17), Shutdown(18)

{% include en/dxl/control_table_alarm_shutdown.md %}

Torque Enable (24)

{% include en/dxl/control_table_torque_enable.md %}

LED (25)

{% include en/dxl/control_table_led.md %}

Compliance Margin (26, 27)

{% include en/dxl/control_table_compliance_margin.md %}

Compliance Slope (28, 29)

{% include en/dxl/control_table_compliance_slope.md %}

Goal Position (30)

{% include en/dxl/control_table_dx_goal_position.md %}

Moving Speed (32)

{% include en/dxl/control_table_moving_speed.md %}

Torque Limit (34)

{% include en/dxl/control_table_torque_limit.md %}

Present Position (36)

{% include en/dxl/control_table_potentio_present_position.md %}

Present Speed (38)

{% include en/dxl/control_table_present_speed.md %}

Present Load (40)

{% include en/dxl/control_table_present_load.md %}

Present Voltage (42)

{% include en/dxl/control_table_present_volt.md %}

Present Temperature (43)

{% include en/dxl/control_table_present_temp.md %}

Registered Instruction (44)

{% include en/dxl/control_table_reg_instruction.md %}

Moving (46)

{% include en/dxl/control_table_moving.md %}

Lock (47)

{% include en/dxl/control_table_lock.md %}

Punch (48)

{% include en/dxl/control_table_punch.md %}

How to Assemble

  • FR07-B1 Option Frame

  • FR07-H1 Option Frame

  • FR07-S1 Option Frame

  • FR07-B101 Option Frame

  • FR07-F101, FR07-X101 Option Frame

  • FR07-H101 Option Frame

  • FR07-S101 Option Frame

  • HN07-N1 Horn

  • HN07-I1 Horn

  • HN07-T1 Horn

  • HN07-N101 Horn

  • HN07-I101 Horn

  • HN07-T101 Horn

  • Combinations

Maintenance

{% include en/dxl/horn_bearing_replacement.md %}

Reference

NOTE : Compatibility Guide {: .notice}

Connector Information

{% include en/dxl/molex_485.md %}

Drawings

{% include en/dxl/download_center_notice.md %}

{% include en/dxl/485_ttl_connection.md %}