diff --git a/Documentation/gpu/amdgpu/thermal.rst b/Documentation/gpu/amdgpu/thermal.rst
index 8aeb0186c9ef8..5e27e4eb39596 100644
--- a/Documentation/gpu/amdgpu/thermal.rst
+++ b/Documentation/gpu/amdgpu/thermal.rst
@@ -63,3 +63,60 @@ gpu_metrics
 
 .. kernel-doc:: drivers/gpu/drm/amd/pm/amdgpu_pm.c
    :doc: gpu_metrics
+
+GFXOFF
+======
+
+GFXOFF is a feature found in most recent GPUs that saves power at runtime. The
+card's RLC (RunList Controller) firmware powers off the gfx engine
+dynamically when there is no workload on gfx or compute pipes. GFXOFF is on by
+default on supported GPUs.
+
+Userspace can interact with GFXOFF through a debugfs interface (all values in
+`uint32_t`, unless otherwise noted):
+
+``amdgpu_gfxoff``
+-----------------
+
+Use it to enable/disable GFXOFF, and to check if it's current enabled/disabled::
+
+  $ xxd -l1 -p /sys/kernel/debug/dri/0/amdgpu_gfxoff
+  01
+
+- Write 0 to disable it, and 1 to enable it.
+- Read 0 means it's disabled, 1 it's enabled.
+
+If it's enabled, that means that the GPU is free to enter into GFXOFF mode as
+needed. Disabled means that it will never enter GFXOFF mode.
+
+``amdgpu_gfxoff_status``
+------------------------
+
+Read it to check current GFXOFF's status of a GPU::
+
+  $ xxd -l1 -p /sys/kernel/debug/dri/0/amdgpu_gfxoff_status
+  02
+
+- 0: GPU is in GFXOFF state, the gfx engine is powered down.
+- 1: Transition out of GFXOFF state
+- 2: Not in GFXOFF state
+- 3: Transition into GFXOFF state
+
+If GFXOFF is enabled, the value will be transitioning around [0, 3], always
+getting into 0 when possible. When it's disabled, it's always at 2. Returns
+``-EINVAL`` if it's not supported.
+
+``amdgpu_gfxoff_count``
+-----------------------
+
+Read it to get the total GFXOFF entry count at the time of query since system
+power-up. The value is an `uint64_t` type, however, due to firmware limitations,
+it can currently overflow as an `uint32_t`. *Only supported in vangogh*
+
+``amdgpu_gfxoff_residency``
+---------------------------
+
+Write 1 to amdgpu_gfxoff_residency to start logging, and 0 to stop. Read it to
+get average GFXOFF residency % multiplied by 100 during the last logging
+interval. E.g. a value of 7854 means 78.54% of the time in the last logging
+interval the GPU was in GFXOFF mode. *Only supported in vangogh*