Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

rfidresearchgroup/proxmark3/proxmark3 is a head-only formula when trying to install blue shark #326

Closed
L07tB0y opened this issue Aug 14, 2019 · 7 comments
Labels
bug

Comments

@L07tB0y
Copy link

@L07tB0y L07tB0y commented Aug 14, 2019

on OSX Mojave trying to install the bluetooth module getting the following.

brew install --with-blueshark proxmark3
Updating Homebrew...
==> Auto-updated Homebrew!
Updated 1 tap (homebrew/core).
==> New Formulae
zrepl
==> Updated Formulae
annie cockroach eccodes gatsby-cli godep h3 postgresql@9.4 schismtracker
caddy crystal exploitdb glooctl goreleaser jruby pre-commit webpack
chakra deno fselect go h2o libomp puzzles wp-cli

Error: rfidresearchgroup/proxmark3/proxmark3 is a head-only formula
Install with brew install --HEAD rfidresearchgroup/proxmark3/proxmark3**

brew install --HEAD rfidresearchgroup/proxmark3/proxmark3 --with-blueshark
Warning: rfidresearchgroup/proxmark3/proxmark3 HEAD-47b60d8 is already installed and up-to-date
To reinstall HEAD, run brew reinstall proxmark3

brew install --with-blueshark --HEAD rfidresearchgroup/proxmark3/proxmark3
Warning: rfidresearchgroup/proxmark3/proxmark3 HEAD-47b60d8 is already installed and up-to-date
To reinstall HEAD, run brew reinstall proxmark3

@iceman1001

This comment has been minimized.

Copy link
Collaborator

@iceman1001 iceman1001 commented Aug 14, 2019

There is a thread over at the forums.
http://www.proxmark.org/forum/viewtopic.php?pid=36163#p36163

@iceman1001 iceman1001 added the bug label Aug 14, 2019
@bettse

This comment has been minimized.

Copy link
Contributor

@bettse bettse commented Aug 17, 2019

To reinstall HEAD, run brew reinstall proxmark3

When you see this message, do a brew remove proxmark3 before attempting another install. head-only formulas don't seem to support changing the install parameters (adding --with-blueshark) without first removing.

@bettse

This comment has been minimized.

Copy link
Contributor

@bettse bettse commented Aug 17, 2019

Also, there is an open issue that isn't macos specific (#322) that might be impacting, so try this command (after doing a brew remove proxmark2)
HOMEBREW_TRAVIS_COMMIT=1da98c7aa6f72c1424069256534bc87a8512b1d2 brew install --with-blueshark --HEAD rfidresearchgroup/proxmark3/proxmark3 (the sha comes from that other issue)

@bettse

This comment has been minimized.

Copy link
Contributor

@bettse bettse commented Aug 17, 2019

And as a reminder, the firmware version needs to always match the desktop version, so be sure to flash after the install:
sudo proxmark3-flasher /dev/tty.usbmodemiceman1 -b /usr/local/Cellar/proxmark3/HEAD-1da98c7/share/firmware/bootrom.elf /usr/local/Cellar/proxmark3/HEAD-1da98c7/share/firmware/fullimage.elf
If you flashed before and your device isn't showing up in /dev/, then try the hold-down-the-button-while-pugging-it-in-and-flashing-thing:

  1. Unplug proxmark3
  2. Start the flasher command (it'll say "Waiting for Proxmark3 to appear on...")
  3. Hold proxmark3 button (keep holding until instructed otherwise)
  4. plug in proxmark3
  5. flasher command should find the device and flash it
  6. release proxmark3 button
  7. unplug proxmark3
  8. plug in proxmark3 (basically to give it a power cycle)
@iceman1001

This comment has been minimized.

Copy link
Collaborator

@iceman1001 iceman1001 commented Aug 20, 2019

There was a bug on OS X, 6f9ec6d Which was fixed by @megabug.

The homebrew repo instructions has been updateded, I think also the relevant documents also.

I think we are ready to close this one.

@doegox

This comment has been minimized.

Copy link
Collaborator

@doegox doegox commented Aug 28, 2019

@L07tB0y can we close?

@L07tB0y

This comment has been minimized.

Copy link
Author

@L07tB0y L07tB0y commented Aug 28, 2019

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Projects
None yet
4 participants
You can’t perform that action at this time.