Skip to content
Branch: master
Find file History
Fetching latest commit…
Cannot retrieve the latest commit at this time.
Permalink
Type Name Latest commit message Commit time
..
Failed to load latest commit information.
examples/dhtnew_test
dhtnew.cpp
dhtnew.h
keywords.txt
library.json
library.properties
readme.md

readme.md

This is the 0.1.5 version of the DHTNEW. This version is stable for both ARM and AVR.

DHTNEW has some new features compared to my DHTlib.

  1. the constructor has a pin number, so the one sensor - one object paradigm is chosen. So you can now make a DHTNEW bathroom(4), kitchen(3) etc.

  2. The read() function now reads both DHT11 and DHT22 sensors and do the right math per sensor. This is very much based upon the well tested DHTlib code.

  3. An offset can be set for both temperature and humidity to have a first order calibration in the class itself. Of course this introduces a possible risk of under- or overflow. For a more elaborated or non-linear offset I refer to my multimap class.

  4. lastRead() keeps track of the last time the sensor is read. If this is not too long ago one can decide not to read the sensors but use the current values for Temperature and humidity. This saves up to 20+ milliseconds for a DHT11 or 5+ millis for a DHT22. Note that these sensors should have 1-2 seconds between reads according to specification. In the future this functionality could be inside the library by setting a time threshold (e.g. 1 second by default) to give more stable results.

  5. Added interrupt enable / disable flag to prevent interrupts disturb timing of DHT protocol.

You can’t perform that action at this time.