Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Added more documentation #3

Merged
merged 17 commits into from Mar 24, 2019

Updated shaft listing, sorted printed parts and verified notes and qu…

…antities.
  • Loading branch information...
Phillip Turner
Phillip Turner committed Mar 16, 2019
commit e3481c7ec63d983293d7d595db0082b2560f291f
@@ -5,34 +5,38 @@ To Build Sawppy the Rover, you will need to print the following parts. Quantitie

| QTY | PART | NOTES |
|:---:|:----:|:-----:|
| 6 | Wheel | |
| 6 | Wheel Hub | |
| 10 | LX-16A - Coupler | |
| 88 | Clip2n125 | Print a few extra for spares |
| 12 | Clip3n20 | Print a few extra for spares |
| 6 | Wheel Hub | Print a few extra for spares |
| 10 | LX-16A - Coupler | Print a few extra for spares |
| 10 | LX-16A - Bracket | |
| 6 | Wheel | |
| 4 | Steering Knuckle | |
| 2 | Fixed Knuckle | |
| 2 | Front Corner | Mirrored |
| 2 | Rear Corner | Mirrored |
| 2 | Bogie Wheels | Mirrored |
| 2 | Bogie Body | Mirrored |
| 2 | Rocker | Mirrored |
| 2 | Rocker Body Mount | |
| 4 | Body Corner | |
| 2 | DiffBrace | |
| 2 | DiffEnd | |
| 2 | DiffLink | |
| 1 | DiffLower | |
| 1 | DiffUpper | |
| 2 | Rod Support | |
| 88 | Clip2n125 | |
| 12 | Clip3n20 | |
| 2 | Fixed Knuckle | Mirrored |
| 2 | Front Corner | Mirrored |
| 2 | Rear Corner | Mirrored |
| 2 | Bogie Wheels | Mirrored |
| 2 | Bogie Body | Mirrored |
| 2 | Rocker | Mirrored |
| 2 | Rocker Body Mount | Mirrored |
| 2 | DiffEnd | Mirrored |

## Shafts
The following are lengths and quantites for the shafts. You should make the differential axle form steel, and the others can be made from aluminum or steel.


| QTY | LENGTH | PAR |
| QTY | LENGTH | PART |
|:---:|:----:|:-----:|
| 1 | 300 | Differential Shaft |
| 6 | 50 | Wheel Axle Shaft |
This conversation was marked as resolved by Roger-random

This comment has been minimized.

Copy link
@Roger-random

Roger-random Mar 24, 2019

Owner

I'm worried about quoting a length here, because the actual length depends on thickness of the retainer clip used by the builder. Looks like you've added 1mm per retainer clip groove but this won't necessarily be correct. What do you think?

This comment has been minimized.

Copy link
@TechMav75

TechMav75 Mar 24, 2019

Author Contributor

Added:
Please see Shaft dimensions for more details.

The lengths below are approximate, depending on groove size. The important dimensions are the distances between the grooves.

| 4 | 61 | Steering Shaft |
| 2 | 66.5 | Suspension Bogie Pivot Point |
| 2 | 84 | Suspension Rocker Pivot Point |

## Hardware

@@ -41,3 +45,4 @@ You will also need the following hardware
| QTY | PART | NOTES |
|:---:|:----:|:-----:|
| 10 | LX-16A Servos | |
| 30 | 608ZZ Bearings | |
This conversation was marked as resolved by TechMav75

This comment has been minimized.

Copy link
@Roger-random

Roger-random Mar 24, 2019

Owner

Please remove ZZ suffix. 608ZZ indicates metal seal on both sides. This is not required for Sawppy, any 608 bearing will do.

This comment has been minimized.

Copy link
@TechMav75

TechMav75 Mar 24, 2019

Author Contributor

Removed

ProTip! Use n and p to navigate between commits in a pull request.
You can’t perform that action at this time.