diff --git a/ReadMe.md b/ReadMe.md
index 213d3768a0a..d9aae9bd0c0 100644
--- a/ReadMe.md
+++ b/ReadMe.md
@@ -31,9 +31,10 @@ This software is for experimental purposes only and is not meant for any illegal
 
 ## Latest Updates - [PATREON: Latest Release RM0727-0355-0.87.1-1670f3c](https://www.patreon.com/RogueMaster?filters[tag]=Latest%20Release)
 
-- Last Synced/Checked Unleashed, changes in [changelog](https://github.com/RogueMaster/flipperzero-firmware-wPlugins/blob/420/CHANGELOG.md) and in [commits](https://github.com/DarkFlippers/unleashed-firmware/commits/dev): `2023-07-28 01:00 EST`
-- Last Synced/Checked OFW, changes in [commits](https://github.com/flipperdevices/flipperzero-firmware/commits/dev): `2023-07-28 01:00 EST`
+- Last Synced/Checked Unleashed, changes in [changelog](https://github.com/RogueMaster/flipperzero-firmware-wPlugins/blob/420/CHANGELOG.md) and in [commits](https://github.com/DarkFlippers/unleashed-firmware/commits/dev): `2023-07-28 02:20 EST`
+- Last Synced/Checked OFW, changes in [commits](https://github.com/flipperdevices/flipperzero-firmware/commits/dev): `2023-07-28 02:20 EST`
 - [Fixed Memory leak/Pointer issue with CFW Settings app (By ESurge)](https://github.com/RogueMaster/flipperzero-firmware-wPlugins/pull/724)
+- [Configurable SPI & UART Channels (By Sil333033)]
 
 <a name="release">
 
diff --git a/applications/drivers/subghz/cc1101_ext/cc1101_ext.c b/applications/drivers/subghz/cc1101_ext/cc1101_ext.c
index bd15f9cc6d8..a9021a4d0b5 100644
--- a/applications/drivers/subghz/cc1101_ext/cc1101_ext.c
+++ b/applications/drivers/subghz/cc1101_ext/cc1101_ext.c
@@ -18,7 +18,7 @@
 #define TAG "SubGhz_Device_CC1101_Ext"
 
 #define SUBGHZ_DEVICE_CC1101_EXT_TX_GPIO &gpio_ext_pb2
-#define SUBGHZ_DEVICE_CC1101_EXT_DANGEROUS_RANGE false
+#define SUBGHZ_DEVICE_CC1101_EXT_EXTENDED_RANGE false
 
 /* DMA Channels definition */
 #define SUBGHZ_DEVICE_CC1101_EXT_DMA DMA2
@@ -193,11 +193,25 @@ bool subghz_device_cc1101_ext_alloc() {
     subghz_device_cc1101_ext->state = SubGhzDeviceCC1101ExtStateInit;
     subghz_device_cc1101_ext->regulation = SubGhzDeviceCC1101ExtRegulationTxRx;
     subghz_device_cc1101_ext->async_mirror_pin = NULL;
-    subghz_device_cc1101_ext->spi_bus_handle = &furi_hal_spi_bus_handle_external;
+
     subghz_device_cc1101_ext->g0_pin = SUBGHZ_DEVICE_CC1101_EXT_TX_GPIO;
 
     subghz_device_cc1101_ext->async_rx.capture_delta_duration = 0;
 
+    subghz_device_cc1101_ext->spi_bus_handle =
+        (CFW_SETTINGS()->spi_cc1101_handle == SpiDefault ?
+             &furi_hal_spi_bus_handle_external :
+             &furi_hal_spi_bus_handle_external_extra);
+
+    // this is needed if multiple SPI devices are connected to the same bus but with different CS pins
+    if(CFW_SETTINGS()->spi_cc1101_handle == SpiDefault) {
+        furi_hal_gpio_init_simple(&gpio_ext_pc3, GpioModeOutputPushPull);
+        furi_hal_gpio_write(&gpio_ext_pc3, true);
+    } else if(CFW_SETTINGS()->spi_cc1101_handle == SpiExtra) {
+        furi_hal_gpio_init_simple(&gpio_ext_pa4, GpioModeOutputPushPull);
+        furi_hal_gpio_write(&gpio_ext_pa4, true);
+    }
+
     furi_hal_spi_bus_handle_init(subghz_device_cc1101_ext->spi_bus_handle);
     return subghz_device_cc1101_ext_check_init();
 }
@@ -207,6 +221,13 @@ void subghz_device_cc1101_ext_free() {
     furi_hal_spi_bus_handle_deinit(subghz_device_cc1101_ext->spi_bus_handle);
     free(subghz_device_cc1101_ext);
     subghz_device_cc1101_ext = NULL;
+
+    // resetting the CS pins to floating
+    if(CFW_SETTINGS()->spi_nrf24_handle == SpiDefault) {
+        furi_hal_gpio_init_simple(&gpio_ext_pc3, GpioModeAnalog);
+    } else if(CFW_SETTINGS()->spi_nrf24_handle == SpiExtra) {
+        furi_hal_gpio_init_simple(&gpio_ext_pa4, GpioModeAnalog);
+    }
 }
 
 void subghz_device_cc1101_ext_set_async_mirror_pin(const GpioPin* pin) {
@@ -432,16 +453,16 @@ bool subghz_device_cc1101_ext_is_frequency_valid(uint32_t value) {
 }
 
 bool subghz_device_cc1101_ext_is_tx_allowed(uint32_t value) {
-    if(!(SUBGHZ_DEVICE_CC1101_EXT_DANGEROUS_RANGE) &&
+    if(!(SUBGHZ_DEVICE_CC1101_EXT_EXTENDED_RANGE) &&
        !(value >= 299999755 && value <= 350000335) && // was increased from 348 to 350
        !(value >= 386999938 && value <= 467750000) && // was increased from 464 to 467.75
        !(value >= 778999847 && value <= 928000000)) {
         FURI_LOG_I(TAG, "Frequency blocked - outside default range");
         return false;
     } else if(
-        (SUBGHZ_DEVICE_CC1101_EXT_DANGEROUS_RANGE) &&
+        (SUBGHZ_DEVICE_CC1101_EXT_EXTENDED_RANGE) &&
         !subghz_device_cc1101_ext_is_frequency_valid(value)) {
-        FURI_LOG_I(TAG, "Frequency blocked - outside dangerous range");
+        FURI_LOG_I(TAG, "Frequency blocked - outside extended range");
         return false;
     }
 
@@ -529,7 +550,7 @@ void subghz_device_cc1101_ext_start_async_rx(
     furi_hal_bus_enable(FuriHalBusTIM17);
 
     // Configure TIM
-    //Set the timer resolution to 2 µs
+    //Set the timer resolution to 2 �s
     LL_TIM_SetPrescaler(TIM17, (64 << 1) - 1);
     LL_TIM_SetCounterMode(TIM17, LL_TIM_COUNTERMODE_UP);
     LL_TIM_SetAutoReload(TIM17, 0xFFFF);
@@ -710,7 +731,7 @@ bool subghz_device_cc1101_ext_start_async_tx(SubGhzDeviceCC1101ExtCallback callb
     furi_hal_bus_enable(FuriHalBusTIM17);
 
     // Configure TIM
-    // Set the timer resolution to 2 µs
+    // Set the timer resolution to 2 �s
     LL_TIM_SetPrescaler(TIM17, (64 << 1) - 1);
     LL_TIM_SetCounterMode(TIM17, LL_TIM_COUNTERMODE_UP);
     LL_TIM_SetAutoReload(TIM17, 0xFFFF);
diff --git a/applications/drivers/subghz/cc1101_ext/cc1101_ext.h b/applications/drivers/subghz/cc1101_ext/cc1101_ext.h
index d972fcb6618..dfacf5bc14e 100644
--- a/applications/drivers/subghz/cc1101_ext/cc1101_ext.h
+++ b/applications/drivers/subghz/cc1101_ext/cc1101_ext.h
@@ -10,6 +10,7 @@
 #include <stddef.h>
 #include <toolbox/level_duration.h>
 #include <furi_hal_gpio.h>
+#include <cfw.h>
 
 #ifdef __cplusplus
 extern "C" {
diff --git a/applications/external/camera_suite/views/camera_suite_view_camera.c b/applications/external/camera_suite/views/camera_suite_view_camera.c
index 5d710044b99..a12b8f7c821 100644
--- a/applications/external/camera_suite/views/camera_suite_view_camera.c
+++ b/applications/external/camera_suite/views/camera_suite_view_camera.c
@@ -202,7 +202,7 @@ static bool camera_suite_view_camera_input(InputEvent* event, void* context) {
             break;
         }
         // Send `data` to the ESP32-CAM
-        furi_hal_uart_tx(FuriHalUartIdUSART1, data, 1);
+        furi_hal_uart_tx(UART_CH, data, 1);
     }
     return true;
 }
@@ -224,7 +224,7 @@ static void camera_suite_view_camera_enter(void* context) {
     uint8_t data[1];
     data[0] = 'S'; // Uppercase `S` to start the camera
     // Send `data` to the ESP32-CAM
-    furi_hal_uart_tx(FuriHalUartIdUSART1, data, 1);
+    furi_hal_uart_tx(UART_CH, data, 1);
 
     with_view_model(
         instance->view,
@@ -352,9 +352,13 @@ CameraSuiteViewCamera* camera_suite_view_camera_alloc() {
     furi_thread_start(instance->worker_thread);
 
     // Enable uart listener
-    furi_hal_console_disable();
-    furi_hal_uart_set_br(FuriHalUartIdUSART1, 230400);
-    furi_hal_uart_set_irq_cb(FuriHalUartIdUSART1, camera_on_irq_cb, instance);
+    if(UART_CH == FuriHalUartIdUSART1) {
+        furi_hal_console_disable();
+    } else if(UART_CH == FuriHalUartIdLPUART1) {
+        furi_hal_uart_init(UART_CH, 230400);
+    }
+    furi_hal_uart_set_br(UART_CH, 230400);
+    furi_hal_uart_set_irq_cb(UART_CH, camera_on_irq_cb, instance);
 
     return instance;
 }
@@ -366,6 +370,14 @@ void camera_suite_view_camera_free(CameraSuiteViewCamera* instance) {
         instance->view, UartDumpModel * model, { UNUSED(model); }, true);
     view_free(instance->view);
     free(instance);
+
+    furi_hal_uart_set_irq_cb(UART_CH, NULL, NULL);
+
+    if(UART_CH == FuriHalUartIdLPUART1) {
+        furi_hal_uart_deinit(UART_CH);
+    } else {
+        furi_hal_console_enable();
+    }
 }
 
 View* camera_suite_view_camera_get_view(CameraSuiteViewCamera* instance) {
diff --git a/applications/external/camera_suite/views/camera_suite_view_camera.h b/applications/external/camera_suite/views/camera_suite_view_camera.h
index 5ccbac71a22..2928ddbc3e9 100644
--- a/applications/external/camera_suite/views/camera_suite_view_camera.h
+++ b/applications/external/camera_suite/views/camera_suite_view_camera.h
@@ -14,6 +14,11 @@
 #include <storage/filesystem_api_defines.h>
 #include <storage/storage.h>
 
+#include <cfw.h>
+
+#define UART_CH \
+    (CFW_SETTINGS()->uart_esp_channel == UARTDefault ? FuriHalUartIdUSART1 : FuriHalUartIdLPUART1)
+
 #pragma once
 
 #define FRAME_WIDTH 128
diff --git a/applications/external/esp_flasher/esp_flasher_uart.c b/applications/external/esp_flasher/esp_flasher_uart.c
index 7dd2904b5ce..0c03423e39b 100644
--- a/applications/external/esp_flasher/esp_flasher_uart.c
+++ b/applications/external/esp_flasher/esp_flasher_uart.c
@@ -1,7 +1,9 @@
 #include "esp_flasher_app_i.h"
 #include "esp_flasher_uart.h"
+#include <cfw.h>
 
-#define UART_CH (FuriHalUartIdUSART1)
+#define UART_CH \
+    (CFW_SETTINGS()->uart_esp_channel == UARTDefault ? FuriHalUartIdUSART1 : FuriHalUartIdLPUART1)
 #define BAUDRATE (115200)
 
 struct EspFlasherUart {
diff --git a/applications/external/evil_portal/evil_portal_app_i.h b/applications/external/evil_portal/evil_portal_app_i.h
index 6e410ac2938..bc30b08725c 100644
--- a/applications/external/evil_portal/evil_portal_app_i.h
+++ b/applications/external/evil_portal/evil_portal_app_i.h
@@ -12,10 +12,14 @@
 #include <gui/scene_manager.h>
 #include <gui/view_dispatcher.h>
 
+#include <dialogs/dialogs.h>
+#include <cfw.h>
+
 #define NUM_MENU_ITEMS (5)
 
 #define EVIL_PORTAL_TEXT_BOX_STORE_SIZE (4096)
-#define UART_CH (FuriHalUartIdUSART1)
+#define UART_CH \
+    (CFW_SETTINGS()->uart_esp_channel == UARTDefault ? FuriHalUartIdUSART1 : FuriHalUartIdLPUART1)
 
 #define SET_HTML_CMD "sethtml"
 #define SET_AP_CMD "setap"
diff --git a/applications/external/evil_portal/evil_portal_uart.c b/applications/external/evil_portal/evil_portal_uart.c
index 2698a4410c2..247bccb79de 100644
--- a/applications/external/evil_portal/evil_portal_uart.c
+++ b/applications/external/evil_portal/evil_portal_uart.c
@@ -121,10 +121,16 @@ Evil_PortalUart* evil_portal_uart_init(Evil_PortalApp* app) {
 
     furi_thread_start(uart->rx_thread);
 
-    furi_hal_console_disable();
+    if(UART_CH == FuriHalUartIdUSART1) {
+        furi_hal_console_disable();
+    } else if(UART_CH == FuriHalUartIdLPUART1) {
+        furi_hal_uart_init(UART_CH, app->BAUDRATE);
+    }
+
     if(app->BAUDRATE == 0) {
         app->BAUDRATE = 115200;
     }
+
     furi_hal_uart_set_br(UART_CH, app->BAUDRATE);
     furi_hal_uart_set_irq_cb(UART_CH, evil_portal_uart_on_irq_cb, uart);
 
@@ -139,7 +145,12 @@ void evil_portal_uart_free(Evil_PortalUart* uart) {
     furi_thread_free(uart->rx_thread);
 
     furi_hal_uart_set_irq_cb(UART_CH, NULL, NULL);
-    furi_hal_console_enable();
+
+    if(UART_CH == FuriHalUartIdLPUART1) {
+        furi_hal_uart_deinit(UART_CH);
+    } else {
+        furi_hal_console_enable();
+    }
 
     free(uart);
 }
diff --git a/applications/external/gps_nmea_uart/gps_uart.c b/applications/external/gps_nmea_uart/gps_uart.c
index d44cf22effc..c7220da510e 100644
--- a/applications/external/gps_nmea_uart/gps_uart.c
+++ b/applications/external/gps_nmea_uart/gps_uart.c
@@ -20,15 +20,24 @@ static void gps_uart_on_irq_cb(UartIrqEvent ev, uint8_t data, void* context) {
 }
 
 static void gps_uart_serial_init(GpsUart* gps_uart) {
-    furi_hal_console_disable();
-    furi_hal_uart_set_irq_cb(FuriHalUartIdUSART1, gps_uart_on_irq_cb, gps_uart);
-    furi_hal_uart_set_br(FuriHalUartIdUSART1, gps_uart->baudrate);
+    if(UART_CH == FuriHalUartIdUSART1) {
+        furi_hal_console_disable();
+    } else if(UART_CH == FuriHalUartIdLPUART1) {
+        furi_hal_uart_init(UART_CH, gps_uart->baudrate);
+    }
+
+    furi_hal_uart_set_irq_cb(UART_CH, gps_uart_on_irq_cb, gps_uart);
+    furi_hal_uart_set_br(UART_CH, gps_uart->baudrate);
 }
 
 static void gps_uart_serial_deinit(GpsUart* gps_uart) {
     UNUSED(gps_uart);
-    furi_hal_uart_set_irq_cb(FuriHalUartIdUSART1, NULL, NULL);
-    furi_hal_console_enable();
+    furi_hal_uart_set_irq_cb(UART_CH, NULL, NULL);
+    if(UART_CH == FuriHalUartIdLPUART1) {
+        furi_hal_uart_deinit(UART_CH);
+    } else {
+        furi_hal_console_enable();
+    }
 }
 
 static void gps_uart_parse_nmea(GpsUart* gps_uart, char* line) {
diff --git a/applications/external/gps_nmea_uart/gps_uart.h b/applications/external/gps_nmea_uart/gps_uart.h
index e294e3055f7..dfd0bab722c 100644
--- a/applications/external/gps_nmea_uart/gps_uart.h
+++ b/applications/external/gps_nmea_uart/gps_uart.h
@@ -2,6 +2,10 @@
 
 #include <furi_hal.h>
 #include <notification/notification_messages.h>
+#include <cfw.h>
+
+#define UART_CH \
+    (CFW_SETTINGS()->uart_nmea_channel == UARTDefault ? FuriHalUartIdUSART1 : FuriHalUartIdLPUART1)
 
 #define RX_BUF_SIZE 1024
 
diff --git a/applications/external/mousejacker/lib/nrf24/nrf24.c b/applications/external/mousejacker/lib/nrf24/nrf24.c
index 67c5dde1c65..661abca92b1 100644
--- a/applications/external/mousejacker/lib/nrf24/nrf24.c
+++ b/applications/external/mousejacker/lib/nrf24/nrf24.c
@@ -6,6 +6,15 @@
 #include <string.h>
 
 void nrf24_init() {
+    // this is needed if multiple SPI devices are connected to the same bus but with different CS pins
+    if(CFW_SETTINGS()->spi_nrf24_handle == SpiDefault) {
+        furi_hal_gpio_init_simple(&gpio_ext_pc3, GpioModeOutputPushPull);
+        furi_hal_gpio_write(&gpio_ext_pc3, true);
+    } else if(CFW_SETTINGS()->spi_nrf24_handle == SpiExtra) {
+        furi_hal_gpio_init_simple(&gpio_ext_pa4, GpioModeOutputPushPull);
+        furi_hal_gpio_write(&gpio_ext_pa4, true);
+    }
+
     furi_hal_spi_bus_handle_init(nrf24_HANDLE);
     furi_hal_spi_acquire(nrf24_HANDLE);
     furi_hal_gpio_init(nrf24_CE_PIN, GpioModeOutputPushPull, GpioPullUp, GpioSpeedVeryHigh);
@@ -17,6 +26,13 @@ void nrf24_deinit() {
     furi_hal_spi_bus_handle_deinit(nrf24_HANDLE);
     furi_hal_gpio_write(nrf24_CE_PIN, false);
     furi_hal_gpio_init(nrf24_CE_PIN, GpioModeAnalog, GpioPullNo, GpioSpeedLow);
+
+    // resetting the CS pins to floating
+    if(CFW_SETTINGS()->spi_nrf24_handle == SpiDefault) {
+        furi_hal_gpio_init_simple(&gpio_ext_pc3, GpioModeAnalog);
+    } else if(CFW_SETTINGS()->spi_nrf24_handle == SpiExtra) {
+        furi_hal_gpio_init_simple(&gpio_ext_pa4, GpioModeAnalog);
+    }
 }
 
 void nrf24_spi_trx(
diff --git a/applications/external/mousejacker/lib/nrf24/nrf24.h b/applications/external/mousejacker/lib/nrf24/nrf24.h
index 046784bc787..a6177be324b 100644
--- a/applications/external/mousejacker/lib/nrf24/nrf24.h
+++ b/applications/external/mousejacker/lib/nrf24/nrf24.h
@@ -2,6 +2,7 @@
 #include <stdbool.h>
 #include <stdint.h>
 #include <furi_hal_spi.h>
+#include <cfw.h>
 
 #ifdef __cplusplus
 extern "C" {
@@ -40,7 +41,9 @@ extern "C" {
 
 #define nrf24_TIMEOUT 500
 #define nrf24_CE_PIN &gpio_ext_pb2
-#define nrf24_HANDLE &furi_hal_spi_bus_handle_external
+#define nrf24_HANDLE                                                                         \
+    (CFW_SETTINGS()->spi_nrf24_handle == SpiDefault ? &furi_hal_spi_bus_handle_external : \
+                                                         &furi_hal_spi_bus_handle_external_extra)
 
 /* Low level API */
 
diff --git a/applications/external/nrf24batch/lib/nrf24/nrf24.c b/applications/external/nrf24batch/lib/nrf24/nrf24.c
index 789002f80d5..2003fabbce8 100644
--- a/applications/external/nrf24batch/lib/nrf24/nrf24.c
+++ b/applications/external/nrf24batch/lib/nrf24/nrf24.c
@@ -8,6 +8,15 @@
 #include <string.h>
 
 void nrf24_init() {
+    // this is needed if multiple SPI devices are connected to the same bus but with different CS pins
+    if(CFW_SETTINGS()->spi_nrf24_handle == SpiDefault) {
+        furi_hal_gpio_init_simple(&gpio_ext_pc3, GpioModeOutputPushPull);
+        furi_hal_gpio_write(&gpio_ext_pc3, true);
+    } else if(CFW_SETTINGS()->spi_nrf24_handle == SpiExtra) {
+        furi_hal_gpio_init_simple(&gpio_ext_pa4, GpioModeOutputPushPull);
+        furi_hal_gpio_write(&gpio_ext_pa4, true);
+    }
+
     furi_hal_spi_bus_handle_init(nrf24_HANDLE);
     furi_hal_spi_acquire(nrf24_HANDLE);
     furi_hal_gpio_init(nrf24_CE_PIN, GpioModeOutputPushPull, GpioPullUp, GpioSpeedVeryHigh);
@@ -19,13 +28,16 @@ void nrf24_deinit() {
     furi_hal_spi_bus_handle_deinit(nrf24_HANDLE);
     furi_hal_gpio_write(nrf24_CE_PIN, false);
     furi_hal_gpio_init(nrf24_CE_PIN, GpioModeAnalog, GpioPullNo, GpioSpeedLow);
+
+    // resetting the CS pins to floating
+    if(CFW_SETTINGS()->spi_nrf24_handle == SpiDefault) {
+        furi_hal_gpio_init_simple(&gpio_ext_pc3, GpioModeAnalog);
+    } else if(CFW_SETTINGS()->spi_nrf24_handle == SpiExtra) {
+        furi_hal_gpio_init_simple(&gpio_ext_pa4, GpioModeAnalog);
+    }
 }
 
-void nrf24_spi_trx(
-    FuriHalSpiBusHandle* handle,
-    uint8_t* tx,
-    uint8_t* rx,
-    uint8_t size) {
+void nrf24_spi_trx(FuriHalSpiBusHandle* handle, uint8_t* tx, uint8_t* rx, uint8_t size) {
     furi_hal_gpio_write(handle->cs, false);
     furi_hal_spi_bus_trx(handle, tx, rx, size, nrf24_TIMEOUT);
     furi_hal_gpio_write(handle->cs, true);
@@ -38,7 +50,8 @@ uint8_t nrf24_write_reg(FuriHalSpiBusHandle* handle, uint8_t reg, uint8_t data)
     return buf[0];
 }
 
-uint8_t nrf24_write_buf_reg(FuriHalSpiBusHandle* handle, uint8_t reg, uint8_t* data, uint8_t size) {
+uint8_t
+    nrf24_write_buf_reg(FuriHalSpiBusHandle* handle, uint8_t reg, uint8_t* data, uint8_t size) {
     uint8_t buf[size + 1];
     buf[0] = W_REGISTER | (REGISTER_MASK & reg);
     memcpy(&buf[1], data, size);
@@ -57,7 +70,7 @@ uint8_t nrf24_read_reg(FuriHalSpiBusHandle* handle, uint8_t reg, uint8_t* data,
 }
 
 uint8_t nrf24_read_register(FuriHalSpiBusHandle* handle, uint8_t reg) {
-    uint8_t buf[] = { R_REGISTER | (REGISTER_MASK & reg), 0 };
+    uint8_t buf[] = {R_REGISTER | (REGISTER_MASK & reg), 0};
     nrf24_spi_trx(handle, buf, buf, 2);
     return buf[1];
 }
@@ -190,7 +203,11 @@ uint8_t nrf24_set_packetlen(FuriHalSpiBusHandle* handle, uint8_t len) {
 
 // packet_size: 0 - dyn payload (read from PL_WID), 1 - read from pipe size, >1 - override
 // Return STATUS reg + additional: RX_DR - new data available, 0x80 - NRF24 hardware error
-uint8_t nrf24_rxpacket(FuriHalSpiBusHandle* handle, uint8_t* packet, uint8_t* ret_packetsize, uint8_t packet_size) {
+uint8_t nrf24_rxpacket(
+    FuriHalSpiBusHandle* handle,
+    uint8_t* packet,
+    uint8_t* ret_packetsize,
+    uint8_t packet_size) {
     uint8_t status = 0;
     uint8_t buf[33]; // 32 max payload size + 1 for command
 
@@ -207,8 +224,9 @@ uint8_t nrf24_rxpacket(FuriHalSpiBusHandle* handle, uint8_t* packet, uint8_t* re
         if(status & 0x80) return 0x80; // hardware error
         if(packet_size == 1)
             packet_size = nrf24_get_packetlen(handle, (status >> 1) & 7);
-        else if(packet_size == 0){
-            buf[0] = R_RX_PL_WID; buf[1] = 0xFF;
+        else if(packet_size == 0) {
+            buf[0] = R_RX_PL_WID;
+            buf[1] = 0xFF;
             nrf24_spi_trx(handle, buf, buf, 2);
             packet_size = buf[1];
         }
@@ -241,7 +259,9 @@ uint8_t nrf24_txpacket(FuriHalSpiBusHandle* handle, uint8_t* payload, uint8_t si
         status = nrf24_status(handle);
     } while(!(status & (TX_DS | MAX_RT)) && furi_get_tick() - start_time < 100UL);
     if(status & MAX_RT) {
-        if(furi_log_get_level() == FuriLogLevelDebug) FURI_LOG_D("NRF", "MAX RT: %X (%X)", nrf24_read_register(handle, REG_OBSERVE_TX), status);
+        if(furi_log_get_level() == FuriLogLevelDebug)
+            FURI_LOG_D(
+                "NRF", "MAX RT: %X (%X)", nrf24_read_register(handle, REG_OBSERVE_TX), status);
         nrf24_flush_tx(handle);
     }
     furi_hal_gpio_write(nrf24_CE_PIN, false);
@@ -357,9 +377,9 @@ void int16_to_bytes(uint16_t val, uint8_t* out, bool bigendian) {
     }
 }
 
-uint8_t nrf24_set_mac(uint8_t mac_addr, uint8_t *mac, uint8_t mlen)
-{
+
+uint8_t nrf24_set_mac(uint8_t mac_addr, uint8_t* mac, uint8_t mlen) {
     uint8_t addr[5];
-	for(int i = 0; i < mlen; i++) addr[i] = mac[mlen - i - 1];
-	return nrf24_write_buf_reg(nrf24_HANDLE, mac_addr, addr, mlen);
+    for(int i = 0; i < mlen; i++) addr[i] = mac[mlen - i - 1];
+    return nrf24_write_buf_reg(nrf24_HANDLE, mac_addr, addr, mlen);
 }
\ No newline at end of file
diff --git a/applications/external/nrf24batch/lib/nrf24/nrf24.h b/applications/external/nrf24batch/lib/nrf24/nrf24.h
index a05ddbebc35..b970763729d 100644
--- a/applications/external/nrf24batch/lib/nrf24/nrf24.h
+++ b/applications/external/nrf24batch/lib/nrf24/nrf24.h
@@ -2,6 +2,7 @@
 #include <stdbool.h>
 #include <stdint.h>
 #include <furi_hal_spi.h>
+#include <cfw.h>
 
 #ifdef __cplusplus
 extern "C" {
@@ -47,14 +48,16 @@ extern "C" {
 #define RX_PW_P3 0x14
 #define RX_PW_P4 0x15
 #define RX_PW_P5 0x16
-#define RX_DR    0x40
-#define TX_DS    0x20
-#define MAX_RT   0x10
+#define RX_DR 0x40
+#define TX_DS 0x20
+#define MAX_RT 0x10
 #define NRF24_EN_DYN_ACK 0x01
 
 #define nrf24_TIMEOUT 500
 #define nrf24_CE_PIN &gpio_ext_pb2
-#define nrf24_HANDLE &furi_hal_spi_bus_handle_external
+#define nrf24_HANDLE                                                                         \
+    (CFW_SETTINGS()->spi_nrf24_handle == SpiDefault ? &furi_hal_spi_bus_handle_external : \
+                                                         &furi_hal_spi_bus_handle_external_extra)
 
 /* Low level API */
 
@@ -278,8 +281,11 @@ uint8_t nrf24_set_dst_mac(FuriHalSpiBusHandle* handle, uint8_t* mac, uint8_t siz
  * 
  * @return     device status
  */
-uint8_t
-    nrf24_rxpacket(FuriHalSpiBusHandle* handle, uint8_t* packet, uint8_t* ret_packetsize, uint8_t packet_size_flag);
+uint8_t nrf24_rxpacket(
+    FuriHalSpiBusHandle* handle,
+    uint8_t* packet,
+    uint8_t* ret_packetsize,
+    uint8_t packet_size_flag);
 
 /** Sends TX packet
  *
@@ -315,7 +321,7 @@ void nrf24_configure(
     bool disable_aa);
 
 // Set mac address (MSB first), Return: Status
-uint8_t  nrf24_set_mac(uint8_t mac_addr, uint8_t *mac, uint8_t mlen);
+uint8_t nrf24_set_mac(uint8_t mac_addr, uint8_t* mac, uint8_t mlen);
 
 /** Configures the radio for "promiscuous mode" and primes it for rx
  * This is not an actual mode of the nrf24, but this function exploits a few bugs in the chip that allows it to act as if it were.
diff --git a/applications/external/nrf24scan/lib/nrf24/nrf24.c b/applications/external/nrf24scan/lib/nrf24/nrf24.c
index 83f0613a108..6fd80b1d5d3 100644
--- a/applications/external/nrf24scan/lib/nrf24/nrf24.c
+++ b/applications/external/nrf24scan/lib/nrf24/nrf24.c
@@ -8,6 +8,15 @@
 #include <string.h>
 
 void nrf24_init() {
+    // this is needed if multiple SPI devices are connected to the same bus but with different CS pins
+    if(CFW_SETTINGS()->spi_nrf24_handle == SpiDefault) {
+        furi_hal_gpio_init_simple(&gpio_ext_pc3, GpioModeOutputPushPull);
+        furi_hal_gpio_write(&gpio_ext_pc3, true);
+    } else if(CFW_SETTINGS()->spi_nrf24_handle == SpiExtra) {
+        furi_hal_gpio_init_simple(&gpio_ext_pa4, GpioModeOutputPushPull);
+        furi_hal_gpio_write(&gpio_ext_pa4, true);
+    }
+
     furi_hal_spi_bus_handle_init(nrf24_HANDLE);
     furi_hal_spi_acquire(nrf24_HANDLE);
     furi_hal_gpio_init(nrf24_CE_PIN, GpioModeOutputPushPull, GpioPullUp, GpioSpeedVeryHigh);
@@ -19,6 +28,13 @@ void nrf24_deinit() {
     furi_hal_spi_bus_handle_deinit(nrf24_HANDLE);
     furi_hal_gpio_write(nrf24_CE_PIN, false);
     furi_hal_gpio_init(nrf24_CE_PIN, GpioModeAnalog, GpioPullNo, GpioSpeedLow);
+
+    // resetting the CS pins to floating
+    if(CFW_SETTINGS()->spi_nrf24_handle == SpiDefault) {
+        furi_hal_gpio_init_simple(&gpio_ext_pc3, GpioModeAnalog);
+    } else if(CFW_SETTINGS()->spi_nrf24_handle == SpiExtra) {
+        furi_hal_gpio_init_simple(&gpio_ext_pa4, GpioModeAnalog);
+    }
 }
 
 void nrf24_spi_trx(
@@ -41,7 +57,8 @@ uint8_t nrf24_write_reg(FuriHalSpiBusHandle* handle, uint8_t reg, uint8_t data)
     return rx[0];
 }
 
-uint8_t nrf24_write_buf_reg(FuriHalSpiBusHandle* handle, uint8_t reg, uint8_t* data, uint8_t size) {
+uint8_t
+    nrf24_write_buf_reg(FuriHalSpiBusHandle* handle, uint8_t reg, uint8_t* data, uint8_t size) {
     uint8_t tx[size + 1];
     uint8_t rx[size + 1];
     memset(rx, 0, size + 1);
@@ -190,7 +207,11 @@ uint8_t nrf24_set_packetlen(FuriHalSpiBusHandle* handle, uint8_t len) {
     return status;
 }
 
-uint8_t nrf24_rxpacket(FuriHalSpiBusHandle* handle, uint8_t* packet, uint8_t* ret_packetsize, uint8_t packet_size) {
+uint8_t nrf24_rxpacket(
+    FuriHalSpiBusHandle* handle,
+    uint8_t* packet,
+    uint8_t* ret_packetsize,
+    uint8_t packet_size) {
     uint8_t status = 0;
     uint8_t tx_cmd[33] = {0}; // 32 max payload size + 1 for command
     uint8_t tmp_packet[33] = {0};
@@ -204,13 +225,15 @@ uint8_t nrf24_rxpacket(FuriHalSpiBusHandle* handle, uint8_t* packet, uint8_t* re
     if(status & RX_DR) {
         if(packet_size == 1)
             packet_size = nrf24_get_packetlen(handle, (status >> 1) & 7);
-        else if(packet_size == 0){
-            tx_cmd[0] = R_RX_PL_WID; tx_cmd[1] = 0;
+        else if(packet_size == 0) {
+            tx_cmd[0] = R_RX_PL_WID;
+            tx_cmd[1] = 0;
             nrf24_spi_trx(handle, tx_cmd, tmp_packet, 2, nrf24_TIMEOUT);
             packet_size = tmp_packet[1];
         }
         if(packet_size > 32 || packet_size == 0) packet_size = 32;
-        tx_cmd[0] = R_RX_PAYLOAD; tx_cmd[1] = 0;
+        tx_cmd[0] = R_RX_PAYLOAD;
+        tx_cmd[1] = 0;
         nrf24_spi_trx(handle, tx_cmd, tmp_packet, packet_size + 1, nrf24_TIMEOUT);
         memcpy(packet, &tmp_packet[1], packet_size);
         nrf24_write_reg(handle, REG_STATUS, RX_DR); // clear RX_DR
@@ -240,7 +263,8 @@ uint8_t nrf24_txpacket(FuriHalSpiBusHandle* handle, uint8_t* payload, uint8_t si
     nrf24_set_tx_mode(handle);
 
     uint32_t start_time = furi_get_tick();
-    while(!(status & (TX_DS | MAX_RT)) && furi_get_tick() - start_time < 2000UL) status = nrf24_status(handle);
+    while(!(status & (TX_DS | MAX_RT)) && furi_get_tick() - start_time < 2000UL)
+        status = nrf24_status(handle);
 
     if(status & MAX_RT) nrf24_flush_tx(handle);
 
@@ -525,9 +549,8 @@ uint8_t nrf24_find_channel(
     return ch;
 }
 
-uint8_t nrf24_set_mac(uint8_t mac_addr, uint8_t *mac, uint8_t mlen)
-{
+uint8_t nrf24_set_mac(uint8_t mac_addr, uint8_t* mac, uint8_t mlen) {
     uint8_t addr[5];
-	for(int i = 0; i < mlen; i++) addr[i] = mac[mlen - i - 1];
-	return nrf24_write_buf_reg(nrf24_HANDLE, mac_addr, addr, mlen);
+    for(int i = 0; i < mlen; i++) addr[i] = mac[mlen - i - 1];
+    return nrf24_write_buf_reg(nrf24_HANDLE, mac_addr, addr, mlen);
 }
\ No newline at end of file
diff --git a/applications/external/nrf24scan/lib/nrf24/nrf24.h b/applications/external/nrf24scan/lib/nrf24/nrf24.h
index cd994dc4064..7a5d5f795d5 100644
--- a/applications/external/nrf24scan/lib/nrf24/nrf24.h
+++ b/applications/external/nrf24scan/lib/nrf24/nrf24.h
@@ -2,6 +2,7 @@
 #include <stdbool.h>
 #include <stdint.h>
 #include <furi_hal_spi.h>
+#include <cfw.h>
 
 #ifdef __cplusplus
 extern "C" {
@@ -46,13 +47,15 @@ extern "C" {
 #define RX_PW_P3 0x14
 #define RX_PW_P4 0x15
 #define RX_PW_P5 0x16
-#define RX_DR    0x40
-#define TX_DS    0x20
-#define MAX_RT   0x10
+#define RX_DR 0x40
+#define TX_DS 0x20
+#define MAX_RT 0x10
 
 #define nrf24_TIMEOUT 500
 #define nrf24_CE_PIN &gpio_ext_pb2
-#define nrf24_HANDLE &furi_hal_spi_bus_handle_external
+#define nrf24_HANDLE                                                                         \
+    (CFW_SETTINGS()->spi_nrf24_handle == SpiDefault ? &furi_hal_spi_bus_handle_external : \
+                                                         &furi_hal_spi_bus_handle_external_extra)
 
 /* Low level API */
 
@@ -273,8 +276,11 @@ uint8_t nrf24_set_dst_mac(FuriHalSpiBusHandle* handle, uint8_t* mac, uint8_t siz
  * 
  * @return     device status
  */
-uint8_t
-    nrf24_rxpacket(FuriHalSpiBusHandle* handle, uint8_t* packet, uint8_t* ret_packetsize, uint8_t packet_size_flag);
+uint8_t nrf24_rxpacket(
+    FuriHalSpiBusHandle* handle,
+    uint8_t* packet,
+    uint8_t* ret_packetsize,
+    uint8_t packet_size_flag);
 
 /** Sends TX packet
  *
@@ -310,7 +316,7 @@ void nrf24_configure(
     bool disable_aa);
 
 // Set mac address (MSB first), Return: Status
-uint8_t  nrf24_set_mac(uint8_t mac_addr, uint8_t *mac, uint8_t mlen);
+uint8_t nrf24_set_mac(uint8_t mac_addr, uint8_t* mac, uint8_t mlen);
 
 /** Configures the radio for "promiscuous mode" and primes it for rx
  * This is not an actual mode of the nrf24, but this function exploits a few bugs in the chip that allows it to act as if it were.
diff --git a/applications/external/nrfsniff/lib/nrf24/nrf24.c b/applications/external/nrfsniff/lib/nrf24/nrf24.c
index 67c5dde1c65..661abca92b1 100644
--- a/applications/external/nrfsniff/lib/nrf24/nrf24.c
+++ b/applications/external/nrfsniff/lib/nrf24/nrf24.c
@@ -6,6 +6,15 @@
 #include <string.h>
 
 void nrf24_init() {
+    // this is needed if multiple SPI devices are connected to the same bus but with different CS pins
+    if(CFW_SETTINGS()->spi_nrf24_handle == SpiDefault) {
+        furi_hal_gpio_init_simple(&gpio_ext_pc3, GpioModeOutputPushPull);
+        furi_hal_gpio_write(&gpio_ext_pc3, true);
+    } else if(CFW_SETTINGS()->spi_nrf24_handle == SpiExtra) {
+        furi_hal_gpio_init_simple(&gpio_ext_pa4, GpioModeOutputPushPull);
+        furi_hal_gpio_write(&gpio_ext_pa4, true);
+    }
+
     furi_hal_spi_bus_handle_init(nrf24_HANDLE);
     furi_hal_spi_acquire(nrf24_HANDLE);
     furi_hal_gpio_init(nrf24_CE_PIN, GpioModeOutputPushPull, GpioPullUp, GpioSpeedVeryHigh);
@@ -17,6 +26,13 @@ void nrf24_deinit() {
     furi_hal_spi_bus_handle_deinit(nrf24_HANDLE);
     furi_hal_gpio_write(nrf24_CE_PIN, false);
     furi_hal_gpio_init(nrf24_CE_PIN, GpioModeAnalog, GpioPullNo, GpioSpeedLow);
+
+    // resetting the CS pins to floating
+    if(CFW_SETTINGS()->spi_nrf24_handle == SpiDefault) {
+        furi_hal_gpio_init_simple(&gpio_ext_pc3, GpioModeAnalog);
+    } else if(CFW_SETTINGS()->spi_nrf24_handle == SpiExtra) {
+        furi_hal_gpio_init_simple(&gpio_ext_pa4, GpioModeAnalog);
+    }
 }
 
 void nrf24_spi_trx(
diff --git a/applications/external/nrfsniff/lib/nrf24/nrf24.h b/applications/external/nrfsniff/lib/nrf24/nrf24.h
index 046784bc787..a6177be324b 100644
--- a/applications/external/nrfsniff/lib/nrf24/nrf24.h
+++ b/applications/external/nrfsniff/lib/nrf24/nrf24.h
@@ -2,6 +2,7 @@
 #include <stdbool.h>
 #include <stdint.h>
 #include <furi_hal_spi.h>
+#include <cfw.h>
 
 #ifdef __cplusplus
 extern "C" {
@@ -40,7 +41,9 @@ extern "C" {
 
 #define nrf24_TIMEOUT 500
 #define nrf24_CE_PIN &gpio_ext_pb2
-#define nrf24_HANDLE &furi_hal_spi_bus_handle_external
+#define nrf24_HANDLE                                                                         \
+    (CFW_SETTINGS()->spi_nrf24_handle == SpiDefault ? &furi_hal_spi_bus_handle_external : \
+                                                         &furi_hal_spi_bus_handle_external_extra)
 
 /* Low level API */
 
diff --git a/applications/external/uart_terminal/uart_terminal_app_i.h b/applications/external/uart_terminal/uart_terminal_app_i.h
index a0c4bb81f5a..e35c3c342b8 100644
--- a/applications/external/uart_terminal/uart_terminal_app_i.h
+++ b/applications/external/uart_terminal/uart_terminal_app_i.h
@@ -12,11 +12,15 @@
 #include <gui/modules/variable_item_list.h>
 #include "uart_text_input.h"
 
+#include <cfw.h>
+
 #define NUM_MENU_ITEMS (5)
 
 #define UART_TERMINAL_TEXT_BOX_STORE_SIZE (4096)
 #define UART_TERMINAL_TEXT_INPUT_STORE_SIZE (512)
-#define UART_CH (FuriHalUartIdUSART1)
+#define UART_CH                                                                  \
+    (CFW_SETTINGS()->uart_general_channel == UARTDefault ? FuriHalUartIdUSART1 : \
+                                                           FuriHalUartIdLPUART1)
 
 struct UART_TerminalApp {
     Gui* gui;
diff --git a/applications/external/uart_terminal/uart_terminal_uart.c b/applications/external/uart_terminal/uart_terminal_uart.c
index e906c9e8e50..379e23402f3 100644
--- a/applications/external/uart_terminal/uart_terminal_uart.c
+++ b/applications/external/uart_terminal/uart_terminal_uart.c
@@ -73,7 +73,12 @@ UART_TerminalUart* uart_terminal_uart_init(UART_TerminalApp* app) {
 
     furi_thread_start(uart->rx_thread);
 
-    furi_hal_console_disable();
+    if(UART_CH == FuriHalUartIdUSART1) {
+        furi_hal_console_disable();
+    } else if(UART_CH == FuriHalUartIdLPUART1) {
+        furi_hal_uart_init(UART_CH, app->BAUDRATE);
+    }
+
     if(app->BAUDRATE == 0) {
         app->BAUDRATE = 115200;
     }
@@ -91,7 +96,11 @@ void uart_terminal_uart_free(UART_TerminalUart* uart) {
     furi_thread_free(uart->rx_thread);
 
     furi_hal_uart_set_irq_cb(UART_CH, NULL, NULL);
-    furi_hal_console_enable();
+    if(UART_CH == FuriHalUartIdLPUART1) {
+        furi_hal_uart_deinit(UART_CH);
+    } else {
+        furi_hal_console_enable();
+    }
 
     free(uart);
 }
\ No newline at end of file
diff --git a/applications/external/wifi_deauther_v1/esp8266_deauth.c b/applications/external/wifi_deauther_v1/esp8266_deauth.c
index 76551f60c3f..929b98bb115 100644
--- a/applications/external/wifi_deauther_v1/esp8266_deauth.c
+++ b/applications/external/wifi_deauther_v1/esp8266_deauth.c
@@ -11,9 +11,13 @@
 //#include <notification/notification.h>
 //#include <notification/notification_messages.h>
 //#include <stdlib.h>
+#include <cfw.h>
 
 #include "FlipperZeroWiFiDeauthModuleDefines.h"
 
+#define UART_CH \
+    (CFW_SETTINGS()->uart_esp_channel == UARTDefault ? FuriHalUartIdUSART1 : FuriHalUartIdLPUART1)
+
 #define DEAUTH_APP_DEBUG 0
 
 #if DEAUTH_APP_DEBUG
@@ -392,6 +396,13 @@ int32_t esp8266_deauth_app(void* p) {
 #if DISABLE_CONSOLE
     furi_hal_console_disable();
 #endif
+
+    if(UART_CH == FuriHalUartIdUSART1) {
+        furi_hal_console_disable();
+    } else if(UART_CH == FuriHalUartIdLPUART1) {
+        furi_hal_uart_init(UART_CH, FLIPPERZERO_SERIAL_BAUD);
+    }
+
     furi_hal_uart_set_br(FuriHalUartIdUSART1, FLIPPERZERO_SERIAL_BAUD);
     furi_hal_uart_set_irq_cb(FuriHalUartIdUSART1, uart_on_irq_cb, app);
     DEAUTH_APP_LOG_I("UART Listener created");
@@ -511,6 +522,12 @@ int32_t esp8266_deauth_app(void* p) {
     furi_hal_console_enable();
 #endif
 
+    if(UART_CH == FuriHalUartIdLPUART1) {
+        furi_hal_uart_deinit(UART_CH);
+    } else {
+        furi_hal_console_enable();
+    }
+
     //*app->m_originalBufferLocation = app->m_originalBuffer;
 
     view_port_enabled_set(view_port, false);
diff --git a/applications/external/wifi_deauther_v2/wifi_deauther_app_i.h b/applications/external/wifi_deauther_v2/wifi_deauther_app_i.h
index bab52f38517..9704abdb112 100644
--- a/applications/external/wifi_deauther_v2/wifi_deauther_app_i.h
+++ b/applications/external/wifi_deauther_v2/wifi_deauther_app_i.h
@@ -12,6 +12,11 @@
 #include <gui/modules/text_input.h>
 #include <gui/modules/variable_item_list.h>
 
+#include <cfw.h>
+
+#define UART_CH \
+    (CFW_SETTINGS()->uart_esp_channel == UARTDefault ? FuriHalUartIdUSART1 : FuriHalUartIdLPUART1)
+
 #define NUM_MENU_ITEMS (11)
 
 #define WIFI_deauther_TEXT_BOX_STORE_SIZE (4096)
diff --git a/applications/external/wifi_deauther_v2/wifi_deauther_uart.c b/applications/external/wifi_deauther_v2/wifi_deauther_uart.c
index 3c52bbce204..642e0a75dcb 100644
--- a/applications/external/wifi_deauther_v2/wifi_deauther_uart.c
+++ b/applications/external/wifi_deauther_v2/wifi_deauther_uart.c
@@ -3,7 +3,6 @@
 
 #include <stream_buffer.h>
 
-#define UART_CH (FuriHalUartIdUSART1)
 #define BAUDRATE (115200)
 
 struct WifideautherUart {
@@ -76,7 +75,12 @@ WifideautherUart* wifi_deauther_uart_init(WifideautherApp* app) {
 
     furi_thread_start(uart->rx_thread);
 
-    furi_hal_console_disable();
+    if(UART_CH == FuriHalUartIdUSART1) {
+        furi_hal_console_disable();
+    } else if(UART_CH == FuriHalUartIdLPUART1) {
+        furi_hal_uart_init(UART_CH, BAUDRATE);
+    }
+
     furi_hal_uart_set_br(UART_CH, BAUDRATE);
     furi_hal_uart_set_irq_cb(UART_CH, wifi_deauther_uart_on_irq_cb, uart);
 
@@ -91,7 +95,11 @@ void wifi_deauther_uart_free(WifideautherUart* uart) {
     furi_thread_free(uart->rx_thread);
 
     furi_hal_uart_set_irq_cb(UART_CH, NULL, NULL);
-    furi_hal_console_enable();
+    if(UART_CH == FuriHalUartIdLPUART1) {
+        furi_hal_uart_deinit(UART_CH);
+    } else {
+        furi_hal_console_enable();
+    }
 
     free(uart);
 }
\ No newline at end of file
diff --git a/applications/external/wifi_marauder_companion/scenes/wifi_marauder_scene_console_output.c b/applications/external/wifi_marauder_companion/scenes/wifi_marauder_scene_console_output.c
index 05d94fe8044..f2e5a1a57a5 100644
--- a/applications/external/wifi_marauder_companion/scenes/wifi_marauder_scene_console_output.c
+++ b/applications/external/wifi_marauder_companion/scenes/wifi_marauder_scene_console_output.c
@@ -104,9 +104,6 @@ void wifi_marauder_scene_console_output_on_enter(void* context) {
     wifi_marauder_uart_set_handle_rx_data_cb(
         app->uart,
         wifi_marauder_console_output_handle_rx_data_cb); // setup callback for general log rx thread
-    wifi_marauder_uart_set_handle_rx_data_cb(
-        app->lp_uart,
-        wifi_marauder_console_output_handle_rx_packets_cb); // setup callback for packets rx thread
 
     // Get ready to send command
     if((app->is_command && app->selected_tx_string) || app->script) {
@@ -185,7 +182,6 @@ void wifi_marauder_scene_console_output_on_exit(void* context) {
 
     // Unregister rx callback
     wifi_marauder_uart_set_handle_rx_data_cb(app->uart, NULL);
-    wifi_marauder_uart_set_handle_rx_data_cb(app->lp_uart, NULL);
 
     wifi_marauder_script_worker_free(app->script_worker);
     app->script_worker = NULL;
diff --git a/applications/external/wifi_marauder_companion/wifi_marauder_app.c b/applications/external/wifi_marauder_companion/wifi_marauder_app.c
index c7f03061af3..4c4921e3adf 100644
--- a/applications/external/wifi_marauder_companion/wifi_marauder_app.c
+++ b/applications/external/wifi_marauder_companion/wifi_marauder_app.c
@@ -163,7 +163,7 @@ void wifi_marauder_app_free(WifiMarauderApp* app) {
     scene_manager_free(app->scene_manager);
 
     wifi_marauder_uart_free(app->uart);
-    wifi_marauder_uart_free(app->lp_uart);
+    // wifi_marauder_uart_free(app->lp_uart);
 
     // Close records
     furi_record_close(RECORD_GUI);
@@ -188,8 +188,8 @@ int32_t wifi_marauder_app(void* p) {
     wifi_marauder_make_app_folder(wifi_marauder_app);
     wifi_marauder_load_settings(wifi_marauder_app);
 
-    wifi_marauder_app->uart = wifi_marauder_usart_init(wifi_marauder_app);
-    wifi_marauder_app->lp_uart = wifi_marauder_lp_uart_init(wifi_marauder_app);
+    wifi_marauder_app->uart =
+        wifi_marauder_uart_init(wifi_marauder_app, UART_CH, "WifiMarauderUartRxThread");
 
     view_dispatcher_run(wifi_marauder_app->view_dispatcher);
 
diff --git a/applications/external/wifi_marauder_companion/wifi_marauder_app_i.h b/applications/external/wifi_marauder_companion/wifi_marauder_app_i.h
index 0836920f874..ce27348d1e1 100644
--- a/applications/external/wifi_marauder_companion/wifi_marauder_app_i.h
+++ b/applications/external/wifi_marauder_companion/wifi_marauder_app_i.h
@@ -25,6 +25,10 @@
 #include <storage/storage.h>
 #include <lib/toolbox/path.h>
 #include <dialogs/dialogs.h>
+#include <cfw.h>
+
+#define UART_CH \
+    (CFW_SETTINGS()->uart_esp_channel == UARTDefault ? FuriHalUartIdUSART1 : FuriHalUartIdLPUART1)
 
 #define NUM_MENU_ITEMS (20)
 
@@ -78,7 +82,6 @@ struct WifiMarauderApp {
     int open_log_file_num_pages;
 
     WifiMarauderUart* uart;
-    WifiMarauderUart* lp_uart;
     int selected_menu_index;
     int selected_option_index[NUM_MENU_ITEMS];
     const char* selected_tx_string;
diff --git a/applications/external/wifi_marauder_companion/wifi_marauder_uart.c b/applications/external/wifi_marauder_companion/wifi_marauder_uart.c
index 0c914775272..a7d92fb7e13 100644
--- a/applications/external/wifi_marauder_companion/wifi_marauder_uart.c
+++ b/applications/external/wifi_marauder_companion/wifi_marauder_uart.c
@@ -1,8 +1,6 @@
 #include "wifi_marauder_app_i.h"
 #include "wifi_marauder_uart.h"
 
-#define UART_CH (FuriHalUartIdUSART1)
-#define LP_UART_CH (FuriHalUartIdLPUART1)
 #define BAUDRATE (115200)
 
 struct WifiMarauderUart {
@@ -62,10 +60,6 @@ void wifi_marauder_uart_tx(uint8_t* data, size_t len) {
     furi_hal_uart_tx(UART_CH, data, len);
 }
 
-void wifi_marauder_lp_uart_tx(uint8_t* data, size_t len) {
-    furi_hal_uart_tx(LP_UART_CH, data, len);
-}
-
 WifiMarauderUart*
     wifi_marauder_uart_init(WifiMarauderApp* app, FuriHalUartId channel, const char* thread_name) {
     WifiMarauderUart* uart = malloc(sizeof(WifiMarauderUart));
@@ -90,14 +84,6 @@ WifiMarauderUart*
     return uart;
 }
 
-WifiMarauderUart* wifi_marauder_usart_init(WifiMarauderApp* app) {
-    return wifi_marauder_uart_init(app, UART_CH, "WifiMarauderUartRxThread");
-}
-
-WifiMarauderUart* wifi_marauder_lp_uart_init(WifiMarauderApp* app) {
-    return wifi_marauder_uart_init(app, LP_UART_CH, "WifiMarauderLPUartRxThread");
-}
-
 void wifi_marauder_uart_free(WifiMarauderUart* uart) {
     furi_assert(uart);
 
@@ -108,8 +94,9 @@ void wifi_marauder_uart_free(WifiMarauderUart* uart) {
     furi_hal_uart_set_irq_cb(uart->channel, NULL, NULL);
     if(uart->channel == FuriHalUartIdLPUART1) {
         furi_hal_uart_deinit(uart->channel);
+    } else {
+        furi_hal_console_enable();
     }
-    furi_hal_console_enable();
 
     free(uart);
 }
diff --git a/applications/external/wifi_marauder_companion/wifi_marauder_uart.h b/applications/external/wifi_marauder_companion/wifi_marauder_uart.h
index e352cfec555..af909f14c97 100644
--- a/applications/external/wifi_marauder_companion/wifi_marauder_uart.h
+++ b/applications/external/wifi_marauder_companion/wifi_marauder_uart.h
@@ -14,3 +14,6 @@ void wifi_marauder_lp_uart_tx(uint8_t* data, size_t len);
 WifiMarauderUart* wifi_marauder_usart_init(WifiMarauderApp* app);
 WifiMarauderUart* wifi_marauder_lp_uart_init(WifiMarauderApp* app);
 void wifi_marauder_uart_free(WifiMarauderUart* uart);
+
+WifiMarauderUart*
+    wifi_marauder_uart_init(WifiMarauderApp* app, FuriHalUartId channel, const char* thread_name);
\ No newline at end of file
diff --git a/applications/external/wifi_scanner/FlipperZeroWiFiModuleDefines.h b/applications/external/wifi_scanner/FlipperZeroWiFiModuleDefines.h
index 7b28ebd64ae..ccf1fd5c37a 100644
--- a/applications/external/wifi_scanner/FlipperZeroWiFiModuleDefines.h
+++ b/applications/external/wifi_scanner/FlipperZeroWiFiModuleDefines.h
@@ -15,3 +15,8 @@
 #define FLIPPERZERO_SERIAL_BAUD 115200
 
 #define NA 0
+
+#include <cfw.h>
+
+#define UART_CH \
+    (CFW_SETTINGS()->uart_esp_channel == UARTDefault ? FuriHalUartIdUSART1 : FuriHalUartIdLPUART1)
\ No newline at end of file
diff --git a/applications/external/wifi_scanner/wifi_scanner.c b/applications/external/wifi_scanner/wifi_scanner.c
index 1eb60fd003a..07de32189dc 100644
--- a/applications/external/wifi_scanner/wifi_scanner.c
+++ b/applications/external/wifi_scanner/wifi_scanner.c
@@ -835,7 +835,7 @@ void send_serial_command(ESerialCommand command) {
         return;
     };
 
-    furi_hal_uart_tx(FuriHalUartIdUSART1, data, 1);
+    furi_hal_uart_tx(UART_CH, data, 1);
 }
 
 int32_t wifi_scanner_app(void* p) {
@@ -905,11 +905,14 @@ int32_t wifi_scanner_app(void* p) {
     WIFI_APP_LOG_I("UART thread allocated");
 
     // Enable uart listener
-#if DISABLE_CONSOLE
-    furi_hal_console_disable();
-#endif
-    furi_hal_uart_set_br(FuriHalUartIdUSART1, FLIPPERZERO_SERIAL_BAUD);
-    furi_hal_uart_set_irq_cb(FuriHalUartIdUSART1, uart_on_irq_cb, app);
+    if(UART_CH == FuriHalUartIdUSART1) {
+        furi_hal_console_disable();
+    } else if(UART_CH == FuriHalUartIdLPUART1) {
+        furi_hal_uart_init(UART_CH, FLIPPERZERO_SERIAL_BAUD);
+    }
+
+    furi_hal_uart_set_br(UART_CH, FLIPPERZERO_SERIAL_BAUD);
+    furi_hal_uart_set_irq_cb(UART_CH, uart_on_irq_cb, app);
     WIFI_APP_LOG_I("UART Listener created");
 
     // Because we assume that module was on before we launched the app. We need to ensure that module will be in initial state on app start
@@ -1034,9 +1037,11 @@ int32_t wifi_scanner_app(void* p) {
     // Reset GPIO pins to default state
     furi_hal_gpio_init(&gpio_ext_pc0, GpioModeAnalog, GpioPullNo, GpioSpeedLow);
 
-#if DISABLE_CONSOLE
-    furi_hal_console_enable();
-#endif
+    if(UART_CH == FuriHalUartIdLPUART1) {
+        furi_hal_uart_deinit(UART_CH);
+    } else {
+        furi_hal_console_enable();
+    }
 
     view_port_enabled_set(view_port, false);
 
diff --git a/applications/settings/cfw_app/scenes/cfw_app_scene_protocols.c b/applications/settings/cfw_app/scenes/cfw_app_scene_protocols.c
index 1e732a73114..eef6253b6bd 100644
--- a/applications/settings/cfw_app/scenes/cfw_app_scene_protocols.c
+++ b/applications/settings/cfw_app/scenes/cfw_app_scene_protocols.c
@@ -25,9 +25,54 @@ static void cfw_app_scene_protocols_subghz_bypass_changed(VariableItem* item) {
     app->save_subghz = true;
 }
 
+static void cfw_app_scene_protocols_cc1101_handle_changed(VariableItem* item) {
+    CfwApp* app = variable_item_get_context(item);
+    CFW_SETTINGS()->spi_cc1101_handle =
+        variable_item_get_current_value_index(item) == 0 ? SpiDefault : SpiExtra;
+    variable_item_set_current_value_text(
+        item, CFW_SETTINGS()->spi_cc1101_handle == SpiDefault ? "Default" : "Extra");
+    app->save_settings = true;
+}
+
+static void cfw_app_scene_protocols_nrf24_handle_changed(VariableItem* item) {
+    CfwApp* app = variable_item_get_context(item);
+    CFW_SETTINGS()->spi_nrf24_handle =
+        variable_item_get_current_value_index(item) == 0 ? SpiDefault : SpiExtra;
+    variable_item_set_current_value_text(
+        item, CFW_SETTINGS()->spi_nrf24_handle == SpiDefault ? "Default" : "Extra");
+    app->save_settings = true;
+}
+
+static void cfw_app_scene_protocols_esp32_channel_changed(VariableItem* item) {
+    CfwApp* app = variable_item_get_context(item);
+    CFW_SETTINGS()->uart_esp_channel =
+        variable_item_get_current_value_index(item) == 0 ? UARTDefault : UARTExtra;
+    variable_item_set_current_value_text(
+        item, CFW_SETTINGS()->uart_esp_channel == UARTDefault ? "13,14" : "15,16");
+    app->save_settings = true;
+}
+
+static void cfw_app_scene_protocols_nmea_channel_changed(VariableItem* item) {
+    CfwApp* app = variable_item_get_context(item);
+    CFW_SETTINGS()->uart_nmea_channel =
+        variable_item_get_current_value_index(item) == 0 ? UARTDefault : UARTExtra;
+    variable_item_set_current_value_text(
+        item, CFW_SETTINGS()->uart_nmea_channel == UARTDefault ? "13,14" : "15,16");
+    app->save_settings = true;
+}
+
+static void cfw_app_scene_protocols_general_channel_changed(VariableItem* item) {
+    CfwApp* app = variable_item_get_context(item);
+    CFW_SETTINGS()->uart_general_channel =
+        variable_item_get_current_value_index(item) == 0 ? UARTDefault : UARTExtra;
+    variable_item_set_current_value_text(
+        item, CFW_SETTINGS()->uart_general_channel == UARTDefault ? "13,14" : "15,16");
+    app->save_settings = true;
+}
+
 void cfw_app_scene_protocols_on_enter(void* context) {
     CfwApp* app = context;
-    // CfwSettings* cfw_settings = CFW_SETTINGS();
+    CfwSettings* cfw_settings = CFW_SETTINGS();
     VariableItemList* var_item_list = app->var_item_list;
     VariableItem* item;
 
@@ -43,6 +88,44 @@ void cfw_app_scene_protocols_on_enter(void* context) {
     variable_item_set_current_value_index(item, app->subghz_bypass);
     variable_item_set_current_value_text(item, app->subghz_bypass ? "ON" : "OFF");
 
+    item = variable_item_list_add(
+        var_item_list, "SPI CC1101 Handle", 2, cfw_app_scene_protocols_cc1101_handle_changed, app);
+    variable_item_set_current_value_index(item, cfw_settings->spi_cc1101_handle);
+    variable_item_set_current_value_text(
+        item, cfw_settings->spi_cc1101_handle == SpiDefault ? "Default" : "Extra");
+
+    item = variable_item_list_add(
+        var_item_list, "SPI NRF24 Handle", 2, cfw_app_scene_protocols_nrf24_handle_changed, app);
+    variable_item_set_current_value_index(item, cfw_settings->spi_nrf24_handle);
+    variable_item_set_current_value_text(
+        item, cfw_settings->spi_nrf24_handle == SpiDefault ? "Default" : "Extra");
+
+    item = variable_item_list_add(
+        var_item_list,
+        "UART ESP32/ESP8266 Channel",
+        2,
+        cfw_app_scene_protocols_esp32_channel_changed,
+        app);
+    variable_item_set_current_value_index(item, cfw_settings->uart_esp_channel);
+    variable_item_set_current_value_text(
+        item, cfw_settings->uart_esp_channel == UARTDefault ? "13,14" : "15,16");
+
+    item = variable_item_list_add(
+        var_item_list, "UART NMEA Channel", 2, cfw_app_scene_protocols_nmea_channel_changed, app);
+    variable_item_set_current_value_index(item, cfw_settings->uart_nmea_channel);
+    variable_item_set_current_value_text(
+        item, cfw_settings->uart_nmea_channel == UARTDefault ? "13,14" : "15,16");
+
+    item = variable_item_list_add(
+        var_item_list,
+        "UART General Channel",
+        2,
+        cfw_app_scene_protocols_general_channel_changed,
+        app);
+    variable_item_set_current_value_index(item, cfw_settings->uart_general_channel);
+    variable_item_set_current_value_text(
+        item, cfw_settings->uart_general_channel == UARTDefault ? "13,14" : "15,16");
+
     variable_item_list_set_enter_callback(
         var_item_list, cfw_app_scene_protocols_var_item_list_callback, app);
 
diff --git a/firmware/targets/f7/api_symbols.csv b/firmware/targets/f7/api_symbols.csv
index 4eedf09fb46..c129e3929b7 100644
--- a/firmware/targets/f7/api_symbols.csv
+++ b/firmware/targets/f7/api_symbols.csv
@@ -3390,6 +3390,7 @@ Variable,+,furi_hal_sd_spi_handle,FuriHalSpiBusHandle*,
 Variable,+,furi_hal_spi_bus_d,FuriHalSpiBus,
 Variable,+,furi_hal_spi_bus_handle_display,FuriHalSpiBusHandle,
 Variable,+,furi_hal_spi_bus_handle_external,FuriHalSpiBusHandle,
+Variable,+,furi_hal_spi_bus_handle_external_extra,FuriHalSpiBusHandle,
 Variable,+,furi_hal_spi_bus_handle_nfc,FuriHalSpiBusHandle,
 Variable,+,furi_hal_spi_bus_handle_sd_fast,FuriHalSpiBusHandle,
 Variable,+,furi_hal_spi_bus_handle_sd_slow,FuriHalSpiBusHandle,
diff --git a/firmware/targets/f7/furi_hal/furi_hal_spi_config.c b/firmware/targets/f7/furi_hal/furi_hal_spi_config.c
index 757ac23661d..5c8d2f8920e 100644
--- a/firmware/targets/f7/furi_hal/furi_hal_spi_config.c
+++ b/firmware/targets/f7/furi_hal/furi_hal_spi_config.c
@@ -350,6 +350,15 @@ FuriHalSpiBusHandle furi_hal_spi_bus_handle_external = {
     .cs = &gpio_ext_pa4,
 };
 
+FuriHalSpiBusHandle furi_hal_spi_bus_handle_external_extra = {
+    .bus = &furi_hal_spi_bus_r,
+    .callback = furi_hal_spi_bus_handle_external_event_callback,
+    .miso = &gpio_ext_pa6,
+    .mosi = &gpio_ext_pa7,
+    .sck = &gpio_ext_pb3,
+    .cs = &gpio_ext_pc3,
+};
+
 inline static void furi_hal_spi_bus_d_handle_event_callback(
     FuriHalSpiBusHandle* handle,
     FuriHalSpiBusHandleEvent event,
diff --git a/firmware/targets/f7/furi_hal/furi_hal_spi_config.h b/firmware/targets/f7/furi_hal/furi_hal_spi_config.h
index eab633a1938..b2cf679cda4 100644
--- a/firmware/targets/f7/furi_hal/furi_hal_spi_config.h
+++ b/firmware/targets/f7/furi_hal/furi_hal_spi_config.h
@@ -47,6 +47,20 @@ extern FuriHalSpiBusHandle furi_hal_spi_bus_handle_nfc;
  */
 extern FuriHalSpiBusHandle furi_hal_spi_bus_handle_external;
 
+/** External on `furi_hal_spi_bus_r`
+ * Preset: `furi_hal_spi_preset_1edge_low_2m`
+ * 
+ * miso: pa6
+ * mosi: pa7
+ * sck: pb3
+ * cs:  pc3 (software controlled)
+ * 
+ * @warning not initialized by default, call `furi_hal_spi_bus_handle_init` to initialize
+ * Bus pins are floating on inactive state, CS high after initialization
+ * 
+ */
+extern FuriHalSpiBusHandle furi_hal_spi_bus_handle_external_extra;
+
 /** ST7567(Display) on `furi_hal_spi_bus_d` */
 extern FuriHalSpiBusHandle furi_hal_spi_bus_handle_display;
 
diff --git a/lib/cfw/cfw.h b/lib/cfw/cfw.h
index 33139838d76..93c116fd6ff 100644
--- a/lib/cfw/cfw.h
+++ b/lib/cfw/cfw.h
@@ -17,6 +17,18 @@ extern "C" {
 #define NAMESPOOF_VERSION 1
 #define NAMESPOOF_PATH EXT_PATH("dolphin/name.txt")
 
+typedef enum {
+    SpiDefault, // cs on pa4
+    SpiExtra, // cs on pc3
+    SpiCount,
+} SpiHandle;
+
+typedef enum {
+    UARTDefault, // pin 13,14
+    UARTExtra, // pin 15,16
+    UARTCount,
+} UARTChannel;
+
 typedef struct {
     bool wii_menu;
     uint32_t start_point;
@@ -24,6 +36,11 @@ typedef struct {
     bool sort_dirs_first;
     bool dark_mode;
     uint32_t charge_cap;
+    SpiHandle spi_cc1101_handle;
+    SpiHandle spi_nrf24_handle;
+    UARTChannel uart_esp_channel;
+    UARTChannel uart_nmea_channel;
+    UARTChannel uart_general_channel;
     bool rgb_backlight;
 } CfwSettings;
 
diff --git a/lib/cfw/settings.c b/lib/cfw/settings.c
index d9577400b2f..1f1a9d0b2b9 100644
--- a/lib/cfw/settings.c
+++ b/lib/cfw/settings.c
@@ -12,6 +12,11 @@ CfwSettings cfw_settings = {
     .sort_dirs_first = true, // ON
     .dark_mode = false, // OFF
     .charge_cap = 100, // 100%
+    .spi_cc1101_handle = SpiDefault, // &furi_hal_spi_bus_handle_external
+    .spi_nrf24_handle = SpiDefault, // &furi_hal_spi_bus_handle_external
+    .uart_esp_channel = UARTDefault, // pin 13,14
+    .uart_nmea_channel = UARTDefault, // pin 13,14
+    .uart_general_channel = UARTDefault, // pin 13,14
     .rgb_backlight = false, // OFF
 };
 
@@ -35,6 +40,16 @@ void CFW_SETTINGS_LOAD() {
         flipper_format_rewind(file);
         flipper_format_read_uint32(file, "charge_cap", &x->charge_cap, 1);
         flipper_format_rewind(file);
+        flipper_format_read_uint32(file, "spi_cc1101_handle", &x->spi_cc1101_handle, 1);
+        flipper_format_rewind(file);
+        flipper_format_read_uint32(file, "spi_nrf24_handle", &x->spi_nrf24_handle, 1);
+        flipper_format_rewind(file);
+        flipper_format_read_uint32(file, "uart_esp_channel", &x->uart_esp_channel, 1);
+        flipper_format_rewind(file);
+        flipper_format_read_uint32(file, "uart_nmea_channel", &x->uart_nmea_channel, 1);
+        flipper_format_rewind(file);
+        flipper_format_read_uint32(file, "uart_general_channel", &x->uart_general_channel, 1);
+        flipper_format_rewind(file);
         flipper_format_read_bool(file, "rgb_backlight", &x->rgb_backlight, 1);
     }
     flipper_format_free(file);
@@ -49,12 +64,23 @@ void CFW_SETTINGS_SAVE() {
     Storage* storage = furi_record_open(RECORD_STORAGE);
     FlipperFormat* file = flipper_format_file_alloc(storage);
     if(flipper_format_file_open_always(file, CFW_SETTINGS_PATH)) {
+        uint32_t e;
         flipper_format_write_bool(file, "wii_menu", &x->wii_menu, 1);
         flipper_format_write_uint32(file, "start_point", &x->start_point, 1);
         flipper_format_write_bool(file, "lock_menu_type", &x->lock_menu_type, 1);
         flipper_format_write_bool(file, "sort_dirs_first", &x->sort_dirs_first, 1);
         flipper_format_write_bool(file, "dark_mode", &x->dark_mode, 1);
         flipper_format_write_uint32(file, "charge_cap", &x->charge_cap, 1);
+        e = x->spi_cc1101_handle;
+        flipper_format_write_uint32(file, "spi_cc1101_handle", &e, 1);
+        e = x->spi_nrf24_handle;
+        flipper_format_write_uint32(file, "spi_nrf24_handle", &e, 1);
+        e = x->uart_esp_channel;
+        flipper_format_write_uint32(file, "uart_esp_channel", &e, 1);
+        e = x->uart_nmea_channel;
+        flipper_format_write_uint32(file, "uart_nmea_channel", &e, 1);
+        e = x->uart_general_channel;
+        flipper_format_write_uint32(file, "uart_general_channel", &e, 1);
         flipper_format_write_bool(file, "rgb_backlight", &x->rgb_backlight, 1);
     }
     flipper_format_free(file);