201911 cel dev #214
Closed
201911 cel dev #214
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Signed-off-by: Nazarii Hnydyn <nazariig@mellanox.com>
Packaging libnl 3.5.0 based off libnl 3.2.27 packaging. libnl contains various bug fixes that are nice to have. pull-request: sonic-net#3967 signed-off-by: Tamer Ahmed <tamer.ahmed@microsoft.com>
…to prevent prompt (sonic-net#3879) * Change the dpkg default behavior in slave, and docker-base, in order to prevent prompt * Move to right place
* 1158 [restore_neighbors.py] build arp packet with correct hwsrc andpsrc] * 1153 Move away sairedis logrotate from signal handler * 1126 Natsyncd changes in sonic-swss submodule to support NAT feature * 1125 Orchagent changes in sonic-swss submodule to support NAT feature * 1084 [qosorch]: Remove Init Color ACLs * 1059 Natmgrd changes in sonic-swss sub module to support NAT feature
* 323 [Enhancement] debian/conffiles will give prompt when file existing, need a way to supress prompt
* 100 Added support in the kernel for fullcone 3-tuple unique nat.
* 50 : Fix missing DOM threshold info from DB
* 323 [Enhancement] debian/conffiles will give prompt when file existing, need
a way to supress prompt
Revert the PR#1166 portsorch fix wrong orchagent behaviour when LAG member gets disabled.
…net#4100) Increase gc threashold values as below: Previous: net.ipv6.neigh.default.gc_thresh1=128 net.ipv6.neigh.default.gc_thresh2=512 net.ipv6.neigh.default.gc_thresh3=1024 net.ipv4.neigh.default.gc_thresh1=128 net.ipv4.neigh.default.gc_thresh2=512 net.ipv4.neigh.default.gc_thresh3=1024 New net.ipv6.neigh.default.gc_thresh1=1024 net.ipv6.neigh.default.gc_thresh2=2048 net.ipv6.neigh.default.gc_thresh3=4096 net.ipv4.neigh.default.gc_thresh1=1024 net.ipv4.neigh.default.gc_thresh2=2048 net.ipv4.neigh.default.gc_thresh3=4096
*792: [neighbor advertiser] remove http endpoint access *789: [fdbshow][nbrshow] Print interface OID in lieu of name if there is no OID->interface name mapping *788 [acl-loader] Use V6 EtherType for IPv6 ACL rule *786 ipaddr module to ipaddress *785 [dropconfig] Move prefix-handling from CLI to orchagent *645 Changes in swss-utilities submodule to support NAT feature
[aclorch] Enable IN_PORTS ACL qualifier on MIRROR tables (sonic-net#1176)
Fixes sonic-net#4118 Signed-off-by: Mykola Faryma <mykolaf@mellanox.com>
sonic-net#3853) * modified down rules to pre-down rules to ensure that default route is deleted just before interface is made down
remove afulnx_64 install script
Changed logic for building frr. Previously we used latest commit in the FRR_BRANCH. Now the buildsystem will use a tag to identify a commit for building. New approach will let us to update sonic-frr without corrupting building sonic-buildimage.
Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
- What I did Ported a fix from libteam master to our master. Fixes sonic-net#4070 Fixes sonic-net#3649 - How I did it Applied patch jpirko/libteam@c723737 from upstream. - How to verify it Build image for your DUT and warm-reboot your DUT 10 times. Check that all PortChannels are up and no error messages in teamd.log
…rs (sonic-net#4133) Before the fix: lldpcli configure ports Ethernet96 lldp portidsubtype local 'Eth1/1' description 50G|sonic1|Eth1/3/2 bash: sonic1: command not found bash: Eth1/3/2: No such file or directory After fix: lldpcli configure ports Ethernet96 lldp portidsubtype local 'Eth1/1' description '50G|sonic1|Eth1/3/2' run successfully. Signed-off-by: Zhenggen Xu <zxu@linkedin.com>
sonic-net#4136) is coming becuase some of debian package not able to fetch. Signed-off-by: Abhishek <abdosi@microsoft.com>
…et#4137) * [init_cfg.json] Add a new table CONTAINER_FEATURE. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [init_cfg.json] Update the content of table CONTAINER_FEATURE. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [init_cfg.json] Use the template to generate the table CONTAINER_FEATURE. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [init_cfg.json] Add a new table FEATURE. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [init_cfg.json] Change the order of container names according to alphabetical order. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [init_cfg.json] Change the dhcp_relay container name and add rest-api. Signed-off-by: Yong Zhao <yozhao@microsoft.com>
Revert "[config] Add 'interface transceiver' subgroup with 'lpmode' and 'reset' subcommands (sonic-net#904)" Multi-asic changes for config bgp commands and utilities. (sonic-net#910)
PR#39 Setup module versioning Add support for get all Vlans (#37)
* [201911][devices] skip_fancontrol for wedge 100 barefoot platforms (sonic-net#4528) * [device] DellEMC s5232f 50G hwsku support (sonic-net#4525) * [device] DellEmc S5232 support for new hwsku C8D48 8 100G ports and 48 50G ports * 10G ports update for S5232 hwsku-C8D48 Signed-off-by: Srideep Devireddy <srideep_devireddy@dell.com> * DellEMC S6000 updated sensors.conf (sonic-net#4568) Change PSU MAX temperature to 80 degree Change tmp75 sensors default temperature value from 25/50 to 70/80 degree. * [sonic-slave-stretch]: install same version for docker-ce and docker-ce-cli difference versions can cause compatibility issue between the server and client Signed-off-by: Guohan Lu <lguohan@gmail.com> * [baseimage]: install same version for docker-ce and docker-ce-cli Signed-off-by: Guohan Lu <lguohan@gmail.com> * [FRR]: Update frr to latest 7.2.1-s3 (sonic-net#4294) - Updated to latest frr 7.2.1 from the master. - Updated patches accordingly * [sonic-buildimage] updated minigraph for ACL Table data and ACL Interface Binding for Multi-NPU platforms (sonic-net#4491) * [sonic-buildimage] updated minigraph for ACL Table data and ACL Interface binding update for multu-npu platform based on subrole as "Frontend" or "Backend". For backend npu no ACL table is associated. For frontend npu only front-panel interface are associated. Updated with test case and fix typo in sample-mingraph for npu Address Review comments Signed-off-by: Abhishek Dosi <abdosi@microsoft.com> * Fixed the logic as per preview comment. Interface Filter logic only applies to Everflow/Mirror tables. * Address Review Comments. * Changes for LLDP docker to support multi-npu platforms (sonic-net#4530) * Changes for LLDP for Multi NPU Platoforms:- a) Enable LLDP for Host namespace for Management Port b) Make sure Management IP is avaliable in per asic namespace needed for LLDP Chassis configuration c) Make sure chassis mac-address is correct in per asic namespace d) Do not run lldp on eth0 of per asic namespace and avoid chassis configuration for same e) Use Linux hostname instead from Device Metadata for lldp chassis configuration since in multi-npu platforms device metadata hostname will be differnt Signed-off-by: Abhishek Dosi <abdosi@microsoft.com> * Address Review Comment with following changes: a) Use Device Metadata hostname even in per namespace conatiner. updated minigraph parsing for same to have hostname as system hostname and add new key for asic name b) Minigraph changes to have MGMT_INTERFACE Key in per asic/namespace config also as needed for LLDP for setting chassis management IP. Signed-off-by: Abhishek Dosi <abdosi@microsoft.com> * Address Review Comments * Moved utility functions for multi-npu platforms from sonic-utilities to sonic_device_util.py (sonic-net#4559) * Moved utility functions for multi-npu platforms from sonic-utilities config/main.py to here so that they can be used any module * Fix the issue with test run during compilation with acl-uploader PR#908 of sonic-utilities. * Fix get_num_npu as it was retuning string and not int * Address Review Comments * Address Review Comments * Fix for issue where image is compile with flag ENABLE_DHCP_GRAPH_SERVICE (sonic-net#4573) and then we load image and reboot even if there was existing config_db.json we will look for DHCP Service. we should disbale update_graph in such cases. This behaviour is silimar to what we have in 201811 image. * Change to enable redistribute connected on Frontend asics instead of backend asics (sonic-net#4588) Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan <arlakshm@microsoft.com> * [DellEMC] S6000 Disable Low power mode by default (sonic-net#4592) * [BFN] Updated Barefoot SDK to 2020-05-07 (sonic-net#4566) Signed-off-by: Andriy Kokhan <akokhan@barefootnetworks.com> * [minigraph] Add tags for egress mirror tables (sonic-net#4526) Signed-off-by: Danny Allen <daall@microsoft.com> * [Submodule update] sonic-utlities with PR's [201911][show] Fix abbreviations for 'show ip bgp ...' commands (sonic-net#909) Changes to support acl-loader and mirror-session config commands for multi-npu platforms. (sonic-net#908) Changes to commands config reload/load-minigraph (sonic-net#919) Stop/Start restapi server upon config reload (sonic-net#911) [config] Add 'interface transceiver' subgroup with 'lpmode' and 'reset' subcommands (sonic-net#904) * [minigraph] Support FECDisabled in minigraph parser (sonic-net#4556) (sonic-net#4624) Signed-off-by: Qi Luo <qiluo-msft@users.noreply.github.com> * [ntp] enable/disable NTP long jump according to reboot type (sonic-net#4577) * [ntp] enable/disable NTP long jump according to reboot type - Enable NTP long jump after cold reboot. - Disable NTP long jump after warrm/fast reboot. Signed-off-by: Ying Xie <ying.xie@microsoft.com> * fix typo * further refactoring * use sonic-db-cli instead * [arista]: remove the soc property disabling sram scan (sonic-net#4623) * Changes to support config-setup service for multi-npu (sonic-net#4609) * Changes to support config-setup service for multi-npu platforms. For Multi-npu we are not supporting as of now config initializtion and ZTP. It will support creating config db from minigraph or using config db from previous file system Signed-off-by: Abhishek Dosi <abdosi@microsoft.com> * Address Review Comments. * Address Review comments * Address Review Comments of using pyhton based config load_minigraph/ config save/config reload from shell scripts so that we don't duplicate code. Also while running from shell we will skip stop/start services done by those commands. * Updated to use python command so no code duplication. * [config]: Fix the device type and internal bgp session status for multi NPU platforms (sonic-net#4600) * The following changes for multi-npu platforms are done - Set the type in device_metadata for asic configuration to be same as host - Set the admin-status of internal bgp sessions as up Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan <arlakshm@microsoft.com> * Adding new BGP peer groups PEER_V4_INT and PEER_V6_INT. (sonic-net#4620) * Adding new BGP peer groups PEER_V4_INT and PEER_V6_INT. The internal BGP sessions will be added to this peer group while the external BGP sessions will be added to the exising PEER_V4 and PEER_V6 peer group. * Check for "ASIC" keyword in the hostname to identify the internal neighbors. * [submodule update] sonic-swss with PR [vnet] Fix IP2ME route creation logic for BITMAP VNET interface (sonic-net#1284) * [submodule update] sonic-util Revert "[config] Add 'interface transceiver' subgroup with 'lpmode' and 'reset' subcommands (sonic-net#904)" Multi-asic changes for config bgp commands and utilities. (sonic-net#910) * [submodule update] sonic-rest API's PR#39 Setup module versioning Add support for get all Vlans (#37) * Update golang version for 1.11.5 to 1.14.2 (sonic-net#4520) Co-authored-by: Myron Sosyak <49795530+msosyak@users.noreply.github.com> Co-authored-by: Srideep <srideep_devireddy@dell.com> Co-authored-by: paavaanan <paavaanan_t_n@dell.com> Co-authored-by: Guohan Lu <lguohan@gmail.com> Co-authored-by: pavel-shirshov <pavelsh@microsoft.com> Co-authored-by: abdosi <58047199+abdosi@users.noreply.github.com> Co-authored-by: arlakshm <55814491+arlakshm@users.noreply.github.com> Co-authored-by: Santhosh Kumar T <53558409+santhosh-kt@users.noreply.github.com> Co-authored-by: Andriy Kokhan <43479230+akokhan@users.noreply.github.com> Co-authored-by: Danny Allen <daall@microsoft.com> Co-authored-by: Abhishek Dosi <abdosi@microsoft.com> Co-authored-by: Qi Luo <qiluo-msft@users.noreply.github.com> Co-authored-by: Ying Xie <yxieca@users.noreply.github.com> Co-authored-by: Samuel Angebault <staphylo@arista.com> Co-authored-by: judyjoseph <53951155+judyjoseph@users.noreply.github.com>
…ce-cli difference versions can cause compatibility issue between the server and client Signed-off-by: Guohan Lu <lguohan@gmail.com>
Signed-off-by: Guohan Lu <lguohan@gmail.com>
Signed-off-by: Maxwill Ma <mamax@celestica.com>
add new device folder and platform folder for Shamu and Jaws
update protobuf compiler and units install
Update Dockerfile.j2
Signed-off-by: Maxwill Ma <mamax@celestica.com>
Signed-off-by: Maxwill Ma <mamax@celestica.com>
Signed-off-by: Maxwill Ma <mamax@celestica.com>
Signed-off-by: Maxwill Ma <mamax@celestica.com>
Signed-off-by: Maxwill Ma <mamax@celestica.com>
Signed-off-by: Maxwill Ma <mamax@celestica.com>
Signed-off-by: Maxwill Ma <mamax@celestica.com>
Signed-off-by: Maxwill Ma <mamax@celestica.com>
Signed-off-by: Maxwill Ma <mamax@celestica.com>
Signed-off-by: Maxwill Ma <mamax@celestica.com>
… in sonic version Signed-off-by: Maxwill Ma <mamax@celestica.com>
Signed-off-by: Maxwill Ma <mamax@celestica.com>
Signed-off-by: Maxwill Ma <mamax@celestica.com>
Signed-off-by: Maxwill Ma <mamax@celestica.com>
mudsut4ke
pushed a commit
that referenced
this pull request
Jan 28, 2022
8bb9c5a (HEAD -> master, origin/master, origin/HEAD) Add retry reading/setting mux status to simulated y-cable driver (#221) 2ebd786 [sfp-refactor] Add initial support for SFF-8636 in sonic_xcvr (#218) 221fb8a Fix QSFP-DD power class mask (#212) 4598d40 [Y-Cable][Broadcom] upgrade to support Broadcom Y-Cable API to release 1.2 (#217) 0fdd198 [sfp-refactor] Add initial support for SFF-8436 in sonic_xcvr (#215) a09f5a3 [sfp-refactor] Add new sonic_xcvr package for common transceiver logic (#201) 7ca4f51 Update SFP index definition (#214) Signed-off-by: vaibhav-dahiya <vdahiya@microsoft.com>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
- What I did
Modify sonic-plafornm-modules submodule gitHub path.
- How I did it
- How to verify it
- Description for the changelog
- A picture of a cute animal (not mandatory but encouraged)