I2C Testing between two Arduinos.

The slave sends 14 bytes of data. It sends a several different data types: bets, integer, long integer, and float

I2C_Slave.ino is the sketch for the slave arduino that sends the data to the master when requested.

I2C_Master.ino uses the wire.h library to request data from the slave.

I2C_Master_DSS.ino uses a different library (https://github.com/rambo/I2C) for I2C communication. I wanted to try it because it uses less RAM then wire.h.

I2C_Slave_struct.ino uses a union and typedef struct to convert the I2C data to a byte array

I2C_Master_DSS_struct.ino uses the I2C.h library (not wire.h) and convert data from I2C back to variables using union and struct

When wiring two Arduinos that are both 5 volts, I2C lines both use a 1.5k pull-up resistor to +5v. When using one 5 volt arduino and one 3.3 volt, use 4.7k pull-up resistors to +3.3v line.

More info on the i2c.h library is can be found here: http://dsscircuits.com/articles/arduino-i2c-master-library.html