Welcome to SecureWall Secure WIFI Router - Low cost endpoint protection!
DIY Installation Options
- Hardware to Purchase
- Setup Hardware
- Connect USB Mouse & Keyboard
- Connect a HDMI Monitor
- Connect network cable to your existing internet router
- Prepare microSDHC Memory Card
- Download RaspBerry Raspbian with desktop https://www.raspberrypi.org/downloads/raspbian/
- balenaEtcher is a graphical SD card writing tool that works on Mac OS, Linux and Windows, and is the easiest option for most users. balenaEtcher also supports writing images directly from the zip file, without any unzipping required. To write your image with balenaEtcher
- Download the latest version of balenaEtcher https://www.balena.io/etcher/ and install it.
- Connect an SD card reader with the SD card inside.
- Open balenaEtcher and select from your hard drive the Raspberry Pi .img or .zip file you wish to write to the SD card.
- Select the SD card you wish to write your image to.
- Review your selections and click 'Flash!' to begin writing data to the SD card.
- Power up
- Insert MicroSD card into RaspberryPi
- Plug in CanaKit Raspberry Pi 4 Power Supply (USB-C) into RaspBerryPI and wall outlet
- Should look similar to:
- Wait for desktop to appear
- Open console and run the following
wget https://raw.githubusercontent.com/SecuritasMachina/SecuritasMachina-Distrib/master/distrib/installSecureWall-raspbian.sh sudo chmod ug+x installSecureWall-raspbian.sh sudo ./installSecureWall-raspbian.sh
- Configure your devices use your new WiFi router
- Install root certificate for your PC/Mac/iPhone/Android by downloading http://www.securitasmachina.com/SecuritasWallCert.crt and double clicking the file
- Connect device to back of your router with ethernet cable and connect your devices to the SecuritasWall access point. Default password is "somepassword" no quotes.
Preassembled & Preloaded
Annual Support Options
Note, since the pictures were taken, I upgraded the heatsink to control heat better and prevent throttling down.