Skip to content
Elink paper raspberry driver
C C++ Makefile
Branch: master
Clone or download
Fetching latest commit…
Cannot retrieve the latest commit at this time.
Permalink
Type Name Latest commit message Commit time
Failed to load latest commit information.
2_13_bcm
2_7_bcm
readme.md

readme.md

Elink driver for raspberry pi


Usage

Enable SPI on raspbery pi.

  • sudo raspi-config
  • select Interface Options
  • select SPI
  • enable
  • exit & save

install bcm2835 library

Because this library is based on bcm2835 library,we have to install it.you can follow the instructions below:

If you fail to install the library with the instructions above.you also can get follow the official website:http://www.airspayce.com/mikem/bcm2835/.

Plug the elink shield on raspberry PI.

sudo reboot

Test the library:

2.13: enter 2_13_bcm directory,type:

make
sudo ./epd

2.7: enter 2_7_bcm,type:

make
sudo ./epd

This software is written by downey for seeed studio
Email:dao.huang@seeed.cc and is licensed under The MIT License. Check License.txt for more information.

Contributing to this software is warmly welcomed. You can do this basically by
forking, committing modifications and then pulling requests (follow the links above
for operating guide). Adding change log and your contact into file header is encouraged.
Thanks for your contribution.

Seeed Studio is an open hardware facilitation company based in Shenzhen, China.
Benefiting from local manufacture power and convenient global logistic system,
we integrate resources to serve new era of innovation. Seeed also works with
global distributors and partners to push open hardware movement.

You can’t perform that action at this time.